HEY I CANNOT FLASH FIRMWARE ,WHEN I TRY I GET THIS ERROR IN ODIN
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6102DDMF4_S6102ODDMF4_S6102DDMF4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> sbl.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> BcmCP.img
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PLZ HELP ME ASAP
please post question in the questions and answer section in future
edit thread moved to q & a
Its because you have not split the firmware into pda phone and modem as your device doesnt support single file firmware flashing
you can download pre split firmware from my firmware thread for duos - please follow all instructions
http://forum.xda-developers.com/showthread.php?p=51505106#post51505106
marcussmith2626 said:
please post question in the questions and answer section in future
Its because you have not split the firmware into pda phone and modem as your device doesnt support single file firmware flashing
you can download pre split firmware from my firmware thread for duos - please follow all instructions
http://forum.xda-developers.com/showthread.php?p=51505106#post51505106
Click to expand...
Click to collapse
sorry i was worried
Related
I was Downgrading SM-N910H From Lolipop to Kit kat With odin
it says failed i tried many times but no sucess
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1AOB1_N910HOJV1ANL2_N910HXXU1ANL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Syed Muneeb said:
I was Downgrading SM-N910H From Lolipop to Kit kat With odin
it says failed i tried many times but no sucess
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1AOB1_N910HOJV1ANL2_N910HXXU1ANL3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/011> Removed!!
Click to expand...
Click to collapse
Have you tried downloading another firmware and flashing it?
No I jst download only 1 firmware for sm-n910h I didnt try another I downloaded from samt
Now its soft brick. It say select recovery mod in kies what should I do I want to get back to kit kat I from pakistan
Syed Muneeb said:
Now its soft brick. It say select recovery mod in kies what should I do I want to get back to kit kat I from pakistan
Click to expand...
Click to collapse
Can you get into recovery mode on your phone and restore an old kitkat backup?
No I couldn't I flash lolipop it's working but I want to downgrade to kit kat
Does downgrade cause hard brick?
I think you have to stay on lollipop now as the bootloader got updated. If you flash lollipop your phone should be back working
Sent from my SM-N910F using Tapatalk
Same thing happened to me. After the odin fail message, I removed the battery, went to download mode again and flashed twrp 2.8.6.1 (latest one). After flashing, it rebooted and working perfectly fine now.
In my own case, I upgraded to marshmallow but am unable to make calls. Saying "Not Registered to Network"
Hello,
I'm currently on simplerom. I want to flash original stock lollipop. But when using odin v3.10.6 I get this message:
Enter CS for MD5 <OSM> ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5 is valid.
Checking MD5 finished Sucessfully <OSM> ..
<OSM> Leave CS ..
<ID:0/011> Odin v.3 engine (ID: 11) ..
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can you guys help me ?
Thanks in advance.
flash by Odin this kernel SpaceX-Kernel-v0.2_N910C(Dev).tar.md5 and after that flash any rom you whant also by Odin
if you have an backup ....restore your backup , flash the kernel and after that flash by Odin the rom you want
Good Luck
Vytkaz said:
Hello,
I'm currently on simplerom. I want to flash original stock lollipop. But when using odin v3.10.6 I get this message:
Enter CS for MD5 <OSM> ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5 is valid.
Checking MD5 finished Sucessfully <OSM> ..
<OSM> Leave CS ..
<ID:0/011> Odin v.3 engine (ID: 11) ..
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can you guys help me ?
Thanks in advance.
Click to expand...
Click to collapse
Thats not for Note 4. You're trying to flash note 10.1 tablet firmware. Check your model then search for the adequate firmware either on sammobile.com/firmwares or here on xda.
Also wrong section.
Styrke said:
Thats not for Note 4. You're trying to flash note 10.1 tablet firmware. Check your model then search for the adequate firmware either on sammobile.com/firmwares or here on xda.
Also wrong section.
Click to expand...
Click to collapse
Haha!
After a failed root attempt my s5 is stuck on the first start up screen, the one that says powered by android at the bottom. When I try to flash the stock ROM using Odin I get an error message on my phone saying:
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1
This is my Odin log (I am using odin v3.09):
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be appreciated.
Please help!
SecretAgentJeb said:
After a failed root attempt my s5 is stuck on the first start up screen, the one that says powered by android at the bottom. When I try to flash the stock ROM using Odin I get an error message on my phone saying:
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1
This is my Odin log (I am using odin v3.09):
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be appreciated.
Click to expand...
Click to collapse
SecretAgentJeb said:
Please help!
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. First, please do not bump a thread until at least 24 hours have passed. XDA Assist is a very busy forum and your questions will be addressed when someone is available to answer. I will, however, move this thread to your device's Q&A forum. Good luck!
I want to know this as well. I excluded the problem of different PC and different USB cable. Why is it so hard to flash back stock ROM?
I think you are trying to flash an old version, or one not meant for the sprint phone. The file you are flashing ends in NCB, the latest is OK4.
Hi,
I am not sure if I have posted to the right section in the forum. I need help pertaining to flashing original firmware to my note 4 SM-N910G. I have used Odin v3.10.6 and have encountered the below error:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910GDTU1COL2_N910GOLB1COL3_N910GDTU1COJ4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl1.mbn
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed )
Can anyone please advise me what is wrong with my flashing and why does it fail? I need to flash original firmware as my note 4 has blank screen issue. I am not able to factory reset my note 4 as I cannot go into that mode to do so. I am able to go into Odin Mode so I thought to flash original firmware to save my note 4.
I did try using SmartSwitch to update my rooted note 4 but it did not manage to update. No errors shown, just mentioned that update is not successful. Please help as I am totally lost on what to do.... Thanks in advance. Will appreciate step by step guide as I am not a Pro in this area. Sorry about that. You can also email me at [email protected]
Regards,
Wendy
I have a note 4 sm-n910c, I want to downgrade from android 6 to 5.1.1, I download the 5.1.1 rom from sammobile.
And I also downloaded Odin.
What do I need to select in odin in order to downgrade to 5.1.1?is there any guide to it?
Thanks!!
just try it and got error, please help how to fix it!!
i searched alot at xda forum and google and didnt find an answer
Enter CS for MD5 <OSM> ..
<OSM> Check MD5 .. Do not unplug the cord ..
<OSM> Please wait ..
<OSM> XXXX.tar.md5 is valid.
Checking MD5 finished Sucessfully <OSM> ..
<OSM> Leave CS ..
<ID:0/011> Odin v.3 engine (ID: 11) ..
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)