Hi,
I am not sure if I have posted to the right section in the forum. I need help pertaining to flashing original firmware to my note 4 SM-N910G. I have used Odin v3.10.6 and have encountered the below error:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910GDTU1COL2_N910GOLB1COL3_N910GDTU1COJ4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl1.mbn
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed )
Can anyone please advise me what is wrong with my flashing and why does it fail? I need to flash original firmware as my note 4 has blank screen issue. I am not able to factory reset my note 4 as I cannot go into that mode to do so. I am able to go into Odin Mode so I thought to flash original firmware to save my note 4.
I did try using SmartSwitch to update my rooted note 4 but it did not manage to update. No errors shown, just mentioned that update is not successful. Please help as I am totally lost on what to do.... Thanks in advance. Will appreciate step by step guide as I am not a Pro in this area. Sorry about that. You can also email me at [email protected]
Regards,
Wendy
Related
Hi to all of you guys, first of all, XDA forever... in secundis, sorry for my bad english
And now let's start explain...
i'm too sad cause thanks to the life savings i could buy a GS4 GT-I9505 that i bricked the last evening.
I were on a phoenix rom v9.4, when i decides to install AEL kernel stable version 6B. At the boot all the main processes could not startup and they crashes
Since i had not the rom in the sdcard to re-flash, i flashed a 4.4.2 stock rom hoping that would work. But it doesn't..........
I can only go in download, no recovery, with the typical image smartphone - pc with a triangle between them and the phrase "firmware upgrade encountered an issue......." and bla bla bla
when i flash something with odin it gives me this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505ITVGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> sbl1.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl2.mbn
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
<ID:0/010> Added!!
Please help me as you can !
I was rooting the new 5.0.2 update and as i was doing it there a error i think the code was 1 but i am not 100% sure. as soon as i started the odin process and then it froze and i cant get the tablet to go out of Odin mode and i tried flashing the orignal rom and it didnt work.
the processes:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T530NUOVU1BOJ2_T530NUBNN1BOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have no idea why this is happening and i need to get out of odin very fast (because need the info on it)
can someone help please
Hi,
Thanks for using XDA assist.
Your thread will be moved to the Galaxy Tab 4 Q&A, Help & Troubleshooting forum for specialized help. There are experts there who can help you out.
Good Luck! - gsstudios
Your firmware might be corrupted, try redownloading the 4.4.2 version then update it to 5.0.2. I also guess twrp method does not work on 5.x.x firmwares on tab 4
Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
fatfei said:
Hi,
I wouldnt say im a complete novice, i've rooted lots of devices without a hitch in the past. But after a day of trying I have to concede now that I am not as good as i thought. I can't load a rom onto my already (well was) rooted galaxy s5. It seemed a simple task, I downloaded the Marshmallow rom from sammobile for my right carrier, region etc I wanted to upgrade lollipop i had on it. Unfortunately it kept failing in odin 11. Made sure I copied the file to AP etc but wouldn't load.
Long story short I did manage to load a custom rom Galaxy S5 CM14 (CyanogenMod 14, Nougat ROM but I couldn't really get on with it so attempted to reinstall the official rom. I did also load twerp which I cant do and now with a firmware called philztouch which is the only thing I can seem to flash now. Unfortunately everytime I go into download mode and attempt a rom install it doesnt work.
This is what it is outputting attempting the official marshmallow rom below.... Any help much appreciated.
:crying:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1CPFA_G900FEVR1CPF1_G900FXXU1CPE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Just an update, i have loaded twrp on there but too scared to touch anything else pending help
Hi try this guide find a g900f pit file or if you have made a backup of your own and flash it via odin then try again to flash stock
Url : forum.xda-developers.com/showthread.php?t=2659635
Unfortunately I now get this error on Odin
D:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1205)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> sbl1.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> sdi.mbn
<ID:0/010> NON-HLOS.bin
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> modem.bin
<ID:0/010> cache.img.ext4
<ID:0/010> hidden.img.ext4
<ID:0/010> FAIL! (Size)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
force alarm, i was just being impatient. all working. Thank you very much for the help
No problem mate ?
Hi guys help pls
I will be brief, my smartphone s7 SM-G935F he's stuck on TWRP... I wanted to install this firmware with ODIN
but impossible I have this message
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 3914 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help pls guys
TY
Try Odin v3.12.3, 3.13 didn't work for me.
Hi guys help pls
I will be brief, my smartphone s7 SM-G935F he's stuck on TWRP... I wanted to install this firmware with ODIN
but impossible I have this message
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 3914 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help pls guys
TY
what do you mean stuck? does it hang on TWRP logo and not moving? Or you want to install some other recovery or stock firmware.
Ps. if you are stock firmware, i hope its latest as you might have updated your bootloader or modem bec of some custom roms.