Database Users

Galaxy S4 I9505 Odin Fail

Hi everyone,
I have a galaxy s4 i9505 LTE and i had "i9505 XXUGNF1 4.4.2 Stock Firmware" installed.
I try to flash new Stock rom "I9505VJUGNI2_I9505ZTOGNI2_ZTO" but it failed. and said "Complete(Write) operation failed"
Now I try to reinstall the previous "i9505 XXUGNF1" but in middle of flashing following message appeared.
------------------------------------------------
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNF1_I9505OXAGNF1_I9505XXUGNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl1.mbn
<ID:0/010> sbl2.mbn
<ID:0/010> sbl3.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
<ID:0/010> Added!!
-----------------------------------------------------------
please help, My phone is now soft break and stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." message

martikp said:
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It could be a damaged .tar.md5 file. Download it again from another source. I recommend you to download it at "sammobile.com"

[help me pls] bricked gt-i9505, only download mode and can not write nand memory.

Hi to all of you guys, first of all, XDA forever... in secundis, sorry for my bad english
And now let's start explain...
i'm too sad cause thanks to the life savings i could buy a GS4 GT-I9505 that i bricked the last evening.
I were on a phoenix rom v9.4, when i decides to install AEL kernel stable version 6B. At the boot all the main processes could not startup and they crashes
Since i had not the rom in the sdcard to re-flash, i flashed a 4.4.2 stock rom hoping that would work. But it doesn't..........
I can only go in download, no recovery, with the typical image smartphone - pc with a triangle between them and the phrase "firmware upgrade encountered an issue......." and bla bla bla
when i flash something with odin it gives me this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505ITVGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> sbl1.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl2.mbn
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
<ID:0/010> Added!!
Please help me as you can !

[Q] Please help me my note3 n900 not accepted any rom!!

Hello everyone , i have note3 n900 i trying upgrade it with rom (N900XXUENH1_N900OJVENG2_N900XXUENG1_HOME.tar.md5) and not Successful and i try downloading other roms and i get the same problem
odin log :
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUENH1_N900OJVENG2_N900XXUENG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img
<ID:0/008> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/023> Added!!

I roted my grand prime once and un root it but now icant do stock fimware on it .

roted my grand prime once and un root it but now icant do stock fimware on it pls help
the odin says like this
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

anaskonnengal said:
roted my grand prime once and un root it but now icant do stock fimware on it pls help
the odin says like this
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
pls help

Which firmware did u use? It must same firmware on your phone to flash.

anaskonnengal said:
pls help
Click to expand...
Click to collapse
Did You use check on Samsung site for newest Rom ? For your region of course.

extraing new md5 file ; and try flash odin

S7 edge SM-G935F blocked on TWRP

Hi guys help pls
I will be brief, my smartphone s7 SM-G935F he's stuck on TWRP... I wanted to install this firmware with ODIN
but impossible I have this message
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 3914 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help pls guys
TY

what do you mean stuck? does it hang on TWRP logo and not moving? Or you want to install some other recovery or stock firmware.
Ps. if you are stock firmware, i hope its latest as you might have updated your bootloader or modem bec of some custom roms.