Galaxy S4 I9505 Odin Fail - Galaxy S 4 Q&A, Help & Troubleshooting

Hi everyone,
I have a galaxy s4 i9505 LTE and i had "i9505 XXUGNF1 4.4.2 Stock Firmware" installed.
I try to flash new Stock rom "I9505VJUGNI2_I9505ZTOGNI2_ZTO" but it failed. and said "Complete(Write) operation failed"
Now I try to reinstall the previous "i9505 XXUGNF1" but in middle of flashing following message appeared.
------------------------------------------------
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNF1_I9505OXAGNF1_I9505XXUGNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl1.mbn
<ID:0/010> sbl2.mbn
<ID:0/010> sbl3.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
<ID:0/010> Added!!
-----------------------------------------------------------
please help, My phone is now soft break and stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." message

martikp said:
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It could be a damaged .tar.md5 file. Download it again from another source. I recommend you to download it at "sammobile.com"

Related

[help me pls] bricked gt-i9505, only download mode and can not write nand memory.

Hi to all of you guys, first of all, XDA forever... in secundis, sorry for my bad english
And now let's start explain...
i'm too sad cause thanks to the life savings i could buy a GS4 GT-I9505 that i bricked the last evening.
I were on a phoenix rom v9.4, when i decides to install AEL kernel stable version 6B. At the boot all the main processes could not startup and they crashes
Since i had not the rom in the sdcard to re-flash, i flashed a 4.4.2 stock rom hoping that would work. But it doesn't..........
I can only go in download, no recovery, with the typical image smartphone - pc with a triangle between them and the phrase "firmware upgrade encountered an issue......." and bla bla bla
when i flash something with odin it gives me this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505ITVGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> sbl1.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl2.mbn
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
<ID:0/010> Added!!
Please help me as you can !

[Help needed]Note 3 SM-N9005 (i messed it up ?)

With my LITTLE knowledge on how to flash an image with odin i tried to flash the latest 5.0 from sammobiles.
i get the following
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOB6_N9005XEOGBOA4_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
after this i get a screen where it says "Firmware upgrade encountered an issue"
Please help !
p.s i do not know the original firmware of the phone.
Read the faqs and guides first .
Flash another firmware .

Flashing Problem [ Fail! (Auth) ]

Hello all , I Just had a problem while flashing official ROM for SM-G530h Egypt ,Odin Gives me this error :
_________________________
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
_______________________________
Note : The device is Dual SIM , not rooted , It's completely clean ..
The ROM http://www.sammobile.com/firmwares/download/49118/G530HXCU1AOE2_G530HOJV1AOF1_EGY/
ALDaFeN said:
Hello all , I Just had a problem while flashing official ROM for SM-G530h Egypt ,Odin Gives me this error :
_________________________
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
_______________________________
Note : The device is Dual SIM , not rooted , It's completely clean ..
The ROM
Click to expand...
Click to collapse
Just to check ... try flash a 5.0.2 instead of 4.4.4 ... forget language until solution

S7 edge SM-G935F blocked on TWRP

Hi guys help pls
I will be brief, my smartphone s7 SM-G935F he's stuck on TWRP... I wanted to install this firmware with ODIN
but impossible I have this message
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 3914 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help pls guys
TY
Try Odin v3.12.3, 3.13 didn't work for me.

S7 edge SM-G935F blocked on TWRP

Hi guys help pls
I will be brief, my smartphone s7 SM-G935F he's stuck on TWRP... I wanted to install this firmware with ODIN
but impossible I have this message
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 3914 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help pls guys
TY
what do you mean stuck? does it hang on TWRP logo and not moving? Or you want to install some other recovery or stock firmware.
Ps. if you are stock firmware, i hope its latest as you might have updated your bootloader or modem bec of some custom roms.

Categories

Resources