With my LITTLE knowledge on how to flash an image with odin i tried to flash the latest 5.0 from sammobiles.
i get the following
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOB6_N9005XEOGBOA4_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
after this i get a screen where it says "Firmware upgrade encountered an issue"
Please help !
p.s i do not know the original firmware of the phone.
Read the faqs and guides first .
Flash another firmware .
Related
Please help - I have an unuseful phone right now.
I'm trying to update from 4.2.2 -> 4.3 using Odin software. I've tried several versions of Odin - but they all fail with following error:
*****
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
*****
After that my phone does not work, it will only boot to screen saying "Odin mode" ....... "UDC START".
The firmware is downloaded from sammobile.com: I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5
I have to mention that I come from Denmark and the firmware is meant for "France (Orange)" - version 4.3 is not yet released for other european countries.
Afterwards I've also tried to reinstall 4.2.2 - but this one fails with following error:
*****
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9506XXUAMI3_I9506NEEAMI1_I9506XXUAMHD.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
*****
Sorry for putting same thread in two forums - was not able to move the first one.
Hi,
Like the title says, Im completely stuck. Cannot flash stock ROM with ODIN.
Because of panic mood, and cooking and multitasking i forgot to Wipe everything.
Here is what i got:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOC7_G900FPRO1BOC1_G900FXXU1BOC7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I just rooted my samsung galaxy s4 i9505 following the steps on https://forum.xda-developers.com/sho....php?t=2219803.
odin showed it was passed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img.ext4
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/003> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
However, the phone pops out "" .com.google.process.gapps" "s -planner"e.t.c has stooped error. Apps stored in device storage were disappeared and apps stored in sd card can't be read. At the same time, i cannot open any single app. What should I do now?
Thanks
Remove root or reflash stock ROM.
Everything was okay, but my screen broke and then I sent it to repair it. Then it came back with another csc (AUT) and I wanted to change it by odin to the normal one (DRE), but "FAIL" appears. Could somebody please help?
Here´s the data:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXS1CQD1_G900FDRE1CPJ2_G900FXXS1CQA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> NON-HLOS.bin
<ID:0/007> rpm.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> tz.mbn
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
tm60405 said:
Everything was okay, but my screen broke and then I sent it to repair it. Then it came back with another csc (AUT) and I wanted to change it by odin to the normal one (DRE), but "FAIL" appears. Could somebody please help?
////EDIT: okay, just took a AUT firmware and it works (idc if i dont have DRE csc anymore lol):laugh::laugh::laugh::laugh::laugh:////
Click to expand...
Click to collapse
: (Samsung Galaxy s5 SM-G900F) i use android 5.0 in this file... Help i really need my phone but when i try to flash this happen:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOC7_G900FTEN1BOB1_G900FXXU1BOC7_HOME.tar.MD5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help me now my phone has a wierd yellow triangle with a !. it sais firmware update encountered an issue please sellect recovery in kies and try again??
CarlJohnson.CJ said:
: (Samsung Galaxy s5 SM-G900F) i use android 5.0 in this file... Help i really need my phone but when i try to flash this happen:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOC7_G900FTEN1BOB1_G900FXXU1BOC7_HOME.tar.MD5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help me now my phone has a wierd yellow triangle with a !. it sais firmware update encountered an issue please sellect recovery in kies and try again??
Click to expand...
Click to collapse
Do you have original cable (biggest problems are caused by bad cables), on witch version of android where you before ?