: (Samsung Galaxy s5 SM-G900F) i use android 5.0 in this file... Help i really need my phone but when i try to flash this happen:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOC7_G900FTEN1BOB1_G900FXXU1BOC7_HOME.tar.MD5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help me now my phone has a wierd yellow triangle with a !. it sais firmware update encountered an issue please sellect recovery in kies and try again??
CarlJohnson.CJ said:
: (Samsung Galaxy s5 SM-G900F) i use android 5.0 in this file... Help i really need my phone but when i try to flash this happen:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOC7_G900FTEN1BOB1_G900FXXU1BOC7_HOME.tar.MD5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help me now my phone has a wierd yellow triangle with a !. it sais firmware update encountered an issue please sellect recovery in kies and try again??
Click to expand...
Click to collapse
Do you have original cable (biggest problems are caused by bad cables), on witch version of android where you before ?
Related
Installed Beanstalk yesterday, and today my device doesnt find any simcard what can i do? i did a nandbackup, but i get in a boot loop while restoring to it, any advice? (my device is warranty void 0x1) thanks
big_b0sss said:
Can you not flash stock rom via odin?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Trying that now, i managed to get the backup to load, and it found my simcard, but i had no network :/ im flashing "N9005XXUENB4_N9005HTSENB3_HTS" which is the Swedish 4.4.2 stock rom. ill try my best to fix this, if this doesn't work, i might have to smash my phone and get a new one xD bought it this sunday ^^ luckily i got a s3 as backup phone xD
Unfortunately this is what i got out of it:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005HTSENB3_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
any idea?
[SOLVED!]
The problem is now solved (i think)
[SOLUTION:]
Flashed "N9005XXUENB4_N9005PRTENB1_PRT" which is the Poland 4.4.2 stock rom, noticed i didn't have to unlock my simcard and that i lost my connection all the time, so basically what i did after that was removing the pincode to my simcard and now, it's working like a charm (for now).
mattish.91 said:
Installed Beanstalk yesterday, and today my device doesnt find any simcard what can i do? i did a nandbackup, but i get in a boot loop while restoring to it, any advice? (my device is warranty void 0x1) thanks
Click to expand...
Click to collapse
Can you not flash stock rom via odin?
Sent from my SM-N9005 using XDA Premium 4 mobile app
big_b0sss said:
Can you not flash stock rom via odin?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Trying that now, i managed to get the backup to load, and it found my simcard, but i had no network :/ im flashing "N9005XXUENB4_N9005HTSENB3_HTS" which is the Swedish 4.4.2 stock rom. ill try my best to fix this, if this doesn't work, i might have to smash my phone and get a new one xD bought it this sunday ^^ luckily i got a s3 as backup phone xD
Unfortunately this is what i got out of it:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005HTSENB3_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Size)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
any idea?
[SOLVED!]
The problem is now solved (i think)
[SOLUTION:]
Flashed "N9005XXUENB4_N9005PRTENB1_PRT" which is the Poland 4.4.2 stock rom, noticed i didn't have to unlock my simcard and that i lost my connection all the time, so basically what i did after that was removing the pincode to my simcard and now, it's working like a charm (for now).
With my LITTLE knowledge on how to flash an image with odin i tried to flash the latest 5.0 from sammobiles.
i get the following
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOB6_N9005XEOGBOA4_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> aboot.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
after this i get a screen where it says "Firmware upgrade encountered an issue"
Please help !
p.s i do not know the original firmware of the phone.
Read the faqs and guides first .
Flash another firmware .
Hi, so this is my first flash.. my phone came with Android 5.0.2 which is very slow compared to Kitkat, so I tried to flash a 4.4.4 rom for G901F but odin says it failed:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
So now my phone is stuck with the "Firmware Upgrade encountered an issue. Please select recovery mode in kies & try again." error. Does anyone know what does that error mean and is there anything I could do now? Is it because I tried to flash an older rom over my newer one?
Thanks!
xtexistenz said:
Hi, so this is my first flash.. my phone came with Android 5.0.2 which is very slow compared to Kitkat, so I tried to flash a 4.4.4 rom for G901F but odin says it failed:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
So now my phone is stuck with the "Firmware Upgrade encountered an issue. Please select recovery mode in kies & try again." error. Does anyone know what does that error mean and is there anything I could do now? Is it because I tried to flash an older rom over my newer one?
Thanks!
Click to expand...
Click to collapse
All good now, looks like a branded version doesn't work, so I tried a new version (Netherlands) and it worked just fine.
I just rooted my samsung galaxy s4 i9505 following the steps on https://forum.xda-developers.com/sho....php?t=2219803.
odin showed it was passed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img.ext4
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/003> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
However, the phone pops out "" .com.google.process.gapps" "s -planner"e.t.c has stooped error. Apps stored in device storage were disappeared and apps stored in sd card can't be read. At the same time, i cannot open any single app. What should I do now?
Thanks
Remove root or reflash stock ROM.
Everything was okay, but my screen broke and then I sent it to repair it. Then it came back with another csc (AUT) and I wanted to change it by odin to the normal one (DRE), but "FAIL" appears. Could somebody please help?
Here´s the data:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXS1CQD1_G900FDRE1CPJ2_G900FXXS1CQA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> NON-HLOS.bin
<ID:0/007> rpm.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> tz.mbn
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> modem.bin
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
tm60405 said:
Everything was okay, but my screen broke and then I sent it to repair it. Then it came back with another csc (AUT) and I wanted to change it by odin to the normal one (DRE), but "FAIL" appears. Could somebody please help?
////EDIT: okay, just took a AUT firmware and it works (idc if i dont have DRE csc anymore lol):laugh::laugh::laugh::laugh::laugh:////
Click to expand...
Click to collapse