I am a Chinese and used this phone in China, when I get the phone, I must change the original ESN and IMSI, AKEY which the device to my own, so, when I doing near ending, the device reboot, but only can turn on to the first page, it is showed "HTC SNAP", can't open continue.
I have try to save it, but it seemed I can't turn it on:
when I press the volume up + volume down + power, in the tri-color bootloader screen is "trigger ramdump mode",there is a "serial" showed on the bottom when I connect the phone to PC via usb, it will change to "USB", but the ActiveSync is can't identify the device.
when I press volume down + power, in the tri-color bootloader screen is "CEDA200 SPL-0.34.0000 MICROP-WILLOW#C(LED) V58B",there is a "serial" showed on the bottom when I connect the phone to PC via usb, it will change to "USB", but the ActiveSync is can't identify the device too.
And I have "cold-boot" it tooress volume down + send + power→ "this operation will delete all you personal date and reset all settings to manufacturer default press volup to restove manufacturer datault of press other keys to cancel " It can't save the device.
I know before I ask for anyone, I must search my answer through the internet and I do it well, but I can't find the way to save my phone.
I have find a 6.5 rom for it, but "It is HardSPL? Does the bootloader say 0.34.Hard? If not, you have to wait for an official ROM to be released." my S511 isn't HardSPL, and it is can't turn on, so I can't copy the JumpSPL.exe to it and can't flash any costom ROM in it.
Cause my poor english, maybe you can't understand which I said full, anyway, thank you for your kind answer.
haha
same as me
my qq:28835953,add me
Few months ago, I read here on forum that one can upgrade a rom from SD card directly.
I was thrilled when I realised the man was right - it was the safer way to flash a rom, as no connection issue could rise (lets hope the card wil not fail at that few minutes ;D)
So I did it, and I liked it.
The only problem is - I can't find it on the forum any more. (Yes, even using mighty Goooooooogle - no can do).
So - I tried my back-up dir on my PPC (what can I do - I AM a Hamster - for things I like ;D ), and there it was:
* Copy BLACIMG.NBH into the root dir of your Storage Card.
* Be sure to have at least 50% of charge.* Turn off your device by using the Power Button.
* Go to Boot loader mode: Push and hold Vol. Down + press Power button.
* After that your device with have a white screen with text "
Press to power button for continue upgrade or
Press Volume down button for cancel upgrade,
* Press to power button and it will start upgrade Rom.
- Remember to HARDRESET your PDA After ROM upgrade!
Note: Hard reset can be performed by powering the device + pressing Vol Up and Down simultaneously) and following the directions on the screen afterwards.
Now, I did a Goooooooooooooogle search again using "Go to Boot loader mode: Push and hold Vol. Down + press Power button" words, and all I could find was links to New Roms and help requests...
So - I though puting a clear Title to this method is a good idea for future searching (by me and others ), and, need it or not - here it goes...
Cheers,
Nenad
p.s. - what is with "HARDRESET your PDA After ROM upgrade" thing - I never did it untill now, and I newer felt an isue before, just like I don't feel any prosperity now, after doeing it...
always check WIKI
to all newbees, Kindly read the forum rules, sticky threads and WIKI before posting. These are meant to provide great informations regarding almost every general issue. to go to WIKI click here
When I get the bootloader, I press the power button again and nothing happens ?
Hi all !
I can't enter the bootloader screen (screen with blue, green and red stripes) by pressing the volDown key after a soft reset. The phone simply boot on the rom and don't let me see the desired screen.
Is someone can help me to retrieve access to the bootloader screen ?
Radio 2.10.50.8
ROM EnergyRom GTX [13th may 2010]
it shuold be as simple as holding down vol key when powering it on...like you are doing.
u really shutted it fully down and powered on again? or just softreseted via software?
I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !
Fl3eK said:
I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !
Click to expand...
Click to collapse
mmh.. and if u want to hard reset ur phone? i mean.. when u press both, volume up and down at the start.. does atleast the hardreset screen appear?
No It change nothing ... I really can't access this screen anymore. I try also to upgrade to HSPL 2.X but the issue persists
Oo thats weird.. for what do u need the screen anyway?
i would flash a new rom maybe.. so the prob could be solved that way, but i really dont know if that will help >.<
try it with the battery cover off to get a better press
power off
press and hold and keep holding vol down
press and release power KEEP PRESSING VOL DOWN
only release vol once three colored screen shows.
samsamuel, I flash my HD2 more and more but since I test the radio 2.10.50.XX, the device just boot normaly and it not let me enter the bootloader screen (I keep the volDown key during booting after turn on the device like you said)
Darksorrow, I need to get back to radio 2.08.50 because the 2.10.50 sucks my battery very quickly ... :'( I'll try to flash the device with an other ROM ... with luck It could give me back the access to bootloader ...
the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.
samsamuel said:
the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.
Click to expand...
Click to collapse
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?
Fl3eK said:
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?
Click to expand...
Click to collapse
Its possible, but unlikely.
I dont mean to sound like i dont believe your results, but i cant help the feeling that you arent doing it right.
Every post so far where someone couldnt enter bootloader / start a hard reset has been down to the order of pressing and the length of the press.
Its usually that they are
1 - pressing and holding both power and vol
or
2 - releasing vol down when they release power
or
3 - not pressing vol hard enough (this is where the battery cover off helps, it allows the button to press more firmly.)
or
4 - pressing power before they press and hold vol.
all of which will fail to enter bootloader.
ill repeat the process, just for clarity.
power off the phone
press hold and keep holding 'vol down'
tap and release power BUT keep vol down pressed
release vol down when the three coloured screen appears.
any more than that i cant suggest, sorry.
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
It works fine. Thank you.
zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
Thanks a lot this work for me too !
@samsamuel : I understand the way you explain me Even if I kept the vol down touch after powering the device I just see the device booting on ROM ...
I have one more question, do you think I can perform a format (with MTTY) considering the fact that I can't access to bootloader at startup ? I hope this work but the risk is that I can't never install a ROM after formatting if I still can't access to bootloader by pressing volume down at startup ....
Thanks Zelender, the file works wonderfully. ...and yes, I'm sure I was using correct procedure to enter bootloader as I had done it before.
I have a similar situation, but I have a Nexus One. I know this is not the area for the N1, but this is the only place where someone is having the same issue of not being able to go to the bootloader. I press vol down while hitting power button. This would always give me the boot loader menu, but instead it just boots to the OS.
Any way I can regain access to the bootloader, because my os is messed up and my radio isnt operating.
Thanks
Hum ... I just process an task 29 via MTTY and the result is .... "phone sent for repair" so for those who have the problem, DO NOT EXECUTE TASK 29 or you'll have a blank phone and you'll can't install new ROM.
I can't return to winmo rom.
zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
I've the same problem as Fl3ek : I flashed a nand android rom with magldr and I can't return to bootloader mode and I can't make a hard reset. The only thing working is magldr but only for flashing nand android roms (i tried 3 of them : they all work ).
Is there an APK like bootloader.cab ? Or a program to flash or activate bootloader in nand with magldr ?
I tried quick boot with bootloader option but it does'nt work.
hi..
i'm new here. i'm often using this page and first i want to say thanks
don't know, if there is another topic to that problem. i didn't find one.
a few days ago, i bought a lg optimus 7 on ebay because i can't interop my htc throphy (bootloader 5.xx).
now i want to start the bootloader of my lg. i push volume down and tap on my power button. phone starts and runs normaly - but doesn't go in bootloaderscreen - although i push volume- button anymore.
Does anyone know if that's normal or what could be the reason that bootloader doesn't start?
Model: LG E900
Software: Windows Phone 7.5
Operating System Version: 7.10.8107.79
Bootloaderversion: 1.5.1.0
if you want to get in the emergency donwload mode, you should press vol- + camera button + power button.
Hi! I have Sharp 304sh from Taobao and I broke It. Using TWRP I wanted to change chinees ROM to stock And now my device don't load beyond the logo. And my PC (and other PC too) don't see the device. Please help
Hi there
i have the same problem
my phone aquos 304 there are no available physical volume rocker button
i forget the password patern
custom cable data with R jumper to ID pin with zadig software cannot flash the twrp
could someone help me out of this
thx
Hold your power button alot of time, if it vibrate 2 time stop hold your power button and tada you can play your self with twrp or some recovery on your phone
Dont tell much people about that and make thier hard to unlock it