help a few days ago mi celphone was drain out the battery and never wake up again, when i connect to the charger do not respond , no light no boot animation no anything please help, i was reading about the sd card metod but i cannot found a unbrick.img for my celphone
so what can i do for bring to life my hard brick.
My cel is SM-G530H FROM TELCEL MEX.
Better to go samsung care center
AndroidFire said:
Better to go samsung care center
Click to expand...
Click to collapse
that is not an option, i want to back to life by myself
insolencia said:
that is not an option, i want to back to life by myself
Click to expand...
Click to collapse
If you don't have the answer here, and you can't figure something, better take it to Samsung care Center.
This phone has to little development and people who maintain, that is really difficult to solve that cain of issues here.
Revive your battery, Google: How to revive Li-ion battery... there's so many tutorial out there on youtube.
DO it at your own risk though
---------- Post added at 05:35 PM ---------- Previous post was at 05:32 PM ----------
Oh wait.... Can you detect your phone on your computer?
If it does, I suspect it's a bettery... but why all of a sudden... maybe you're always draining it.
GO check how to take care of Li-ion battery. after you read some of the articles you may see different about your phone's battery life...
Mr.IDK said:
Revive your battery, Google: How to revive Li-ion battery... there's so many tutorial out there on youtube.
DO it at your own risk though
---------- Post added at 05:35 PM ---------- Previous post was at 05:32 PM ----------
Oh wait.... Can you detect your phone on your computer?
If it does, I suspect it's a bettery... but why all of a sudden... maybe you're always draining it.
GO check how to take care of Li-ion battery. after you read some of the articles you may see different about your phone's battery life...
Click to expand...
Click to collapse
i put my battery in a universal charger and back to my phone but nothing happened. when i connect to my pc the cellphone not light, dead totally but my pc still recognize as a QHSUSB-DLOAD (bulk), i was reading about the unbrick metod with a sd but i dont find the unbrick.img for my galaxy grand prime. so any another ideas to do? thx for your comments, saludos desde mexico
insolencia said:
i put my battery in a universal charger and back to my phone but nothing happened. when i connect to my pc the cellphone not light, dead totally but my pc still recognize as a QHSUSB-DLOAD (bulk), i was reading about the unbrick metod with a sd but i dont find the unbrick.img for my galaxy grand prime. so any another ideas to do? thx for your comments, saludos desde mexico
Click to expand...
Click to collapse
In your statement your battery is the only issue here, how did you brick your phone?
You're not giving us all the details, and we can't help you with that.
Watch this https://www.youtube.com/watch?v=WFd1CXbRsvs
Are you sure you already did that?
You can flash and unbrick you phone, if that is your problem...
I think you have to use an older version of odin that can flash without in a Download mode state...
Mr.IDK said:
In your statement your battery is the only issue here, how did you brick your phone?
You're not giving us all the details, and we can't help you with that.
Are you sure you already did that?
You can flash and unbrick you phone, if that is your problem...
I think you have to use an older version of odin that can flash without in a Download mode state...
Click to expand...
Click to collapse
yes i already do that my battery has 4.06 volts in the multimetter my battery not have a deep slep problem. i have a hard brick. the only thing my cellphone do is, be recognized for my computer QHSUSB_BULK and my pc was installed Qualcomm HS-USB QDLoader 9008
insolencia said:
yes i already do that my battery has 4.06 volts in the multimetter my battery not have a deep slep problem. i have a hard brick. the only thing my cellphone do is, be recognized for my computer QHSUSB_BULK and my pc was installed Qualcomm HS-USB QDLoader 9008
Click to expand...
Click to collapse
If it is then, you need an SP flash tool and USB VCOM Driver...
lastly you need a scatterloading file for G530H...
I don't know how to get that but I think you can request from the developer section here...
Here this tutorial might help you, http://www.androidrookies.com/2014/09/re-flashing-lenovo-s820-with-official.html#comment-form
I used this method when I help my friend unbricked his phone...
Hope this helps...
Mr.IDK said:
In your statement your battery is the only issue here, how did you brick your phone?
You're not giving us all the details, and we can't help you with that.
Are you sure you already did that?
You can flash and unbrick you phone, if that is your problem...
I think you have to use an older version of odin that can flash without in a Download mode state...
Click to expand...
Click to collapse
a old odin was able to detect the port where is my phone but not flash my phone
(1.87) odin stuck in setupconnection..
insolencia said:
a old odin was able to detect the port where is my phone but not flash my phone
(1.87) odin stuck in setupconnection..
Click to expand...
Click to collapse
try different usb port
AndroidFire said:
try different usb port
Click to expand...
Click to collapse
i tried the sd card metod with a dump of a functional grand prime of a friend, with this i can get the download mode but when a tria to flash any rom in my device fail when flash the user data here is a log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXU2AOA2_G530HODD2AOA1_G530HDDU2AOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> aboot.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> sbl1.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> rpm.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> tz.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> hyp.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> NON-HLOS.bin
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> sec.dat
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> boot.img
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> recovery.img
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> system.img.ext4
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response form LOKE
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so i think odin is triying to flash the rom in my sd card and not flash the emmc of the phone so what can i do please help
insolencia said:
i tried the sd card metod with a dump of a functional grand prime of a friend, with this i can get the download mode but when a tria to flash any rom in my device fail when flash the user data here is a log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXU2AOA2_G530HODD2AOA1_G530HDDU2AOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> aboot.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> sbl1.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> rpm.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> tz.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> hyp.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> NON-HLOS.bin
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> sec.dat
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> boot.img
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> recovery.img
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> system.img.ext4
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response form LOKE
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so i think odin is triying to flash the rom in my sd card and not flash the emmc of the phone so what can i do please help
Click to expand...
Click to collapse
Could you try with this repair firmware...
here is the link
Repair Firmware G530H
GGrand 2
i have Galaxy SM-G7102..My Phone is not turning On just showing Black Screen..It Neither go into Downloadmode nor Recovery...But it shows a Qualcom 9008 Driver in device manager..
Please Help Me ..How Can I Solve this Problem..Just tell Which Software Should I use Or A Method...
insolencia said:
i tried the sd card metod with a dump of a functional grand prime of a friend, with this i can get the download mode but when a tria to flash any rom in my device fail when flash the user data here is a log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXXU2AOA2_G530HODD2AOA1_G530HDDU2AOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> aboot.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> sbl1.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> rpm.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> tz.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> hyp.mbn
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> NON-HLOS.bin
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> sec.dat
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> boot.img
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> recovery.img
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response form LOKE
<ID:0/012> system.img.ext4
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response form LOKE
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so i think odin is triying to flash the rom in my sd card and not flash the emmc of the phone so what can i do please help
Click to expand...
Click to collapse
hey gays.. can u give me ur unbrick.img? i have same problem.. please helmp :crying:
I also have a hard bricked grand prime.
did u solve the problem?
kindly help me also.
insolencia said:
i tried the sd card metod with a dump of a functional grand prime of a friend, with this i can get the download mode but when a tria to flash any rom in my device fail when flash the user data
so i think odin is triying to flash the rom in my sd card and not flash the emmc of the phone so what can i do please help
Click to expand...
Click to collapse
Can you please share the SD card image?
It might help others to enter download mode.
Thank you!
HELP ME
Help me, I need the Dump please.
i have same issue with samsung g7102 and try to boot repair via sd card method but phone does not go in download mode ........
In my testing with g530az, I booted debrick.img with just my boot and files from anther model.
So if it's a bricked g530 post your boot.img and I'll throw it into my debrick.img for you to try
Related
Recently I flashed files to my phone in odin using the phone button and now every time i try to install a rom using odin it always stops at recovery.bin here is the code:
<ID:0/012> Checking MD5 finished Sucessfully..
<ID:0/012> Leave CS..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> cache.rfs
<ID:0/012> dbdata.rfs
<ID:0/012> factoryfs.rfs
<ID:0/012> modem.bin
<ID:0/012> recovery.bin
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried various roms like DL09, DI01 package 3. There is only one rom i can get through called T959TLJL3 i dont even know if thats the right name but when it finishes it reboots and goes to the galaxy s logo and then shuts down. Does any one know how to fix this or is it bricked?
Yours is for the verizon fascinate correct?
Edit: Also to confirm if you have verizon fascinate (some first posters actually have different phones), did you remove the battery, hold the down volume button and then inserted the usb cord?
i do have the verizon fascinate and when i tried the roms i did exactly what you said i got the yellow triangle with the text downloading... below it
i tried it again and i got this from odin
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> Enter CS for MD5..
<ID:0/012> Check MD5.. Do not unplug the cable..
<ID:0/012> Please wait..
<ID:0/012> Checking MD5 finished Sucessfully..
<ID:0/012> Leave CS..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> Sbl.bin
<ID:0/012> cache.rfs
<ID:0/012> factoryfs.rfs
<ID:0/012> movinand.bin
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Two big problem after carefully reading is you flashed a telus rom onto your fascinate. Telus =/= verizon. Also you never should use the phone button, only the pda.
When you say roms, are you trying to flash the full .tar package? Post the link of the "rom" you tried to flash.
If you mean the full package, use the steps below:
1. Uninstall the samsung driver and reinstall it (make sure you have the correct version, 32bit or 64bit)
-File is in first post if you need it: http://forum.xda-developers.com/showthread.php?t=948722
2. Get the EB01 file here: http://www.droidforums.net/forum/sa...roms-w-root-new-clockwork-updated-2-11-a.html
-Get the full stock froyo leak + root + froyo clockworkmod. (If this works, you can flash other eb01 roms using CWM.)
3. Redo the steps I said above using of removing battery and etc.
-And try odin again.
did you say that you used the phone button? ....if you did= BAD!! Use PDA only in odin
PDA only friend there is your problem. Check the forums there should be steps to get you back to stock so you can start again.
Sent from my SCH-I500 using XDA App
I have been using PDA but i accidentally clicked PHONE the first time I tried to flash a rom. I tried EB01_DXC.tar.md5 and i got this.
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> cache.rfs
<ID:0/012> dbdata.rfs
<ID:0/012> zImage
<ID:0/012> recovery.bin
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried CWMrecovery.tar and it stops at recovery.bin also.
If you used the phone button I think it's too late to just try flashing one of these packages in Odin because your phone is now messed up pretty good. I do believe you can get things back to normal (because others have done this and recovered) but I don't know how. Try searching or waiting for someone more learned on the subject to hopefully drop in here. Good luck.
Sent from my SCH-I500 using XDA App
Not only does it seem you used the wrong button (PDA, phone) , you also seemed to try to flash something that belongs on a different phone (telus). Your best bet is to go on the IRC and get help as most people there know a lot.
obviously the wrong button as everyone in the world will tell you, and has......i can say i have heard of simply flashing a new modem in odin correctly....pda button! seems to have fixed some peoples button miscues. I hope this works for you.
I finally got it to work i just followed this guide. http://forum.xda-developers.com/showthread.php?t=977493 Thanks to everyone for trying to help.
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
vega312 said:
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
Click to expand...
Click to collapse
When flashing modem you have to choose phone.
jluiz2 said:
When flashing modem you have to choose phone.
Click to expand...
Click to collapse
Tried flashing the modem file as a Phone, got the same message as above.
Try to download the file again. Maybe it can be corruped. If you unziped, don´t do it when you try again. Flash the file as you get with odin 3.04. Hope to help you.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUAMDE_MODEM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> modem.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
vega312 said:
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
Click to expand...
Click to collapse
Check if there is kies running in the background kies should be closed completly then try
I dont have kies installed and Odin worked to install ttwr.
I dont have kies installed and Odin worked to install ttwr.
i am not too sure myself.. but dont u need to be on stock recovery to flash a a new modem.
rebel1735 said:
i am not too sure myself.. but dont u need to be on stock recovery to flash a a new modem.
Click to expand...
Click to collapse
nope
I have the same problem , tried everything on internet and end up brick my phone. +1 to this problem.
Try a different firmware maybe?, may not be compatible had an issue like that on a S2 ended up changing it and it worked
Carl Blance said:
Try a different firmware maybe?, may not be compatible had an issue like that on a S2 ended up changing it and it worked
Click to expand...
Click to collapse
The issue is , since modem is included in all odin flashable firmwares etc, there is no way to do it. I tried mobile odin, same issue, stucked at "clearing" , tried flash pit file along with stock firmware, tried flash back to original firmware that come with phone, same issue odin stucked at modem.bin. Tried untick "auto-reset" in odin, manual restart, enter download mode , flash again, does not work. Tried switching usb port, switch cable, nothing works.
Error message below :
<ID:2/006> Firmware update start..
<ID:2/006> modem.bin
<ID:2/006> NAND Write Start!!
<ID:2/006> Transmission Complete..
<ID:2/006> Now Writing.. Please wait about 2 minutes
<ID:2/006>
<ID:2/006> Receive Response from boot-loader
<ID:2/006> Complete(Write) operation failed.
Click to expand...
Click to collapse
vega312 said:
Tried flashing the modem file as a Phone, got the same message as above.
Click to expand...
Click to collapse
THANK THANKS!! i did it as you write in my SPH/L720 sprint s4. THANKS AGAIN BRO!!
---------- Post added at 07:50 AM ---------- Previous post was at 07:46 AM ----------
Thanks thanks!!!!
I cannot get a network connection as my sim card is no longer found, even replaced reader but no better. Have tried flashing modem radio firmware but no better, what can I do to get the sim card working again.
The baseband is not available as it is linked to the sim card.
thanks
couldn't flash modem but got it all backworking with my recovery. I still can't GPS. that's my only issue. can't flash back to stock so I guess GPS just won't work for me. Any chance we can get a fix for this with a cm12 rom release to make things easier? This sucks, but I do appreciate all the work that goes into it. It's my fault I can't remember directions. lol
which option u tried pnone or pda
SAME HERE!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> modem.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response from boot-loader
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
pichoD said:
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> modem.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response from boot-loader
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
may be wrong modem for right frimware or vice versa
I updated to Jamal's RC2 and phone would bring up a blank screen as well as strange other bugs. Tried downgrading but have now somehow softbricked my phone.
Here are logs of ODIN:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> recovery.img
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> persdata.img.ext4
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> system.img.ext4
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help me please???
Thanks, Tony.
I managed to reflash PhillZ recovery. Lets see how I go from here...
Hi there,
Prior to flashing Jamals ROM where you on 4.3 or 4.2 firmware? If you were on 4.3 then you cannot downgrade to 4.2....That is probably why it failed in odin
Hi Guys
Following an issue I had earlier when I upgraded my rom, I decided to flash a stock 4.3 rom onto my i19505. I keep getting the following errors in odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505BTUEMK5_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> sbl2.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> sbl3.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> rpm.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> aboot.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone assist me?
Thanks
Chris
scientificharmony said:
Hi Guys
Following an issue I had earlier when I upgraded my rom, I decided to flash a stock 4.3 rom onto my i19505. I keep getting the following errors in odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505BTUEMK5_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> sbl2.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> sbl3.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> rpm.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> aboot.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone assist me?
Thanks
Chris
Click to expand...
Click to collapse
Did you flash the 4.4.2 kitkat leak fna5 by any chance? because if you did , you cannot downgrade your phone to stock 4.3 Mate
Repulsa said:
Did you flash the 4.4.2 kitkat leak fna5 by any chance? because if you did , you cannot downgrade your phone to stock 4.3 Mate
Click to expand...
Click to collapse
Hi
No It was the 4.0 Diamond Dogs Foxhound Rom.
Is there a way to fix this by flalshing something in Odin?
scientificharmony said:
Hi
No It was the 4.0 Diamond Dogs Foxhound Rom.
Is there a way to fix this by flalshing something in Odin?
Click to expand...
Click to collapse
Too bad because it show's that when your flashing the 4.3 stock rom your having a problem because of the newbootloader . im guessing you flashed the fna5 newbooloader in order to fix the wifi/issue on foxhound sorry mate , but you can try to flash your 4.3 Nandroid back up via recovery.
I mean,, is it possible to flash FoxHound_Diamond_Dogs_4.0_Kitkat_4.4.2_By_Snakes_GT-I9505
by odin,,, in some way?
scientificharmony said:
I mean,, is it possible to flash FoxHound_Diamond_Dogs_4.0_Kitkat_4.4.2_By_Snakes_GT-I9505
by odin,,, in some way?
Click to expand...
Click to collapse
No sir ! only custom recovery.
I have a message on my phone when i try and boot.
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
also, i flashed this boot loader...
BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5
scientificharmony said:
I have a message on my phone when i try and boot.
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
also, i flashed this boot loader...
BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
Pull out your battery and wait atleast 10 to 20 sec and put it back , and go to recovery (Power+Volumeup) then do a fullwipe and flash Foxhound. if you still having an issue the best thing you can do is flash the Stock 4.4.2 leak then flash a custom recovery via odin then flash foxhound. . have a nice day.
Repulsa said:
Pull out your battery and wait atleast 10 to 20 sec and put it back , and go to recovery (Power+Volumeup) then do a fullwipe and flash Foxhound. if you still having an issue the best thing you can do is flash the Stock 4.4.2 leak then flash a custom recovery via odin then flash foxhound. . have a nice day.
Click to expand...
Click to collapse
If i do a full wipe, will it not erase fox hound from my sd? i think its already been erased...
scientificharmony said:
If i do a full wipe, will it not erase fox hound from my sd? i think its already been erased...
Click to expand...
Click to collapse
If you did fullwipe i dont think your external (Sdcard you bought) gonna get delete only internal bro (memory integrated in to your phone)
Thats the thing, I dont have an external SD. only internal.
The only thing I think can fix this is a rom that I can flash in Odin
Hii, Well.. today my phone got stuck, and could not restart.
it said;
Movinand Checksum Confirmation Fail
It's in loop. I only get to see 'Movinand Checksum Confirmation Fail' in the top left corner for half a second and its gone.
Then it restarts and i get to see the same thing.
What can i do now?
I tried reflashing 4.4.2 but it says ;
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
----------
Under this you will see the original post/ question and what i did already. Please read.
----------
Dear XDA Guys (and the rest),
I've got a big problem with my i9505 phone. I've been using the Omega Rom V19 (android 4.3). Before, i tried multiple different roms like AOSB, Paranoid Android and other. Lately my phone for no reason would get stuck and would turn black. I thought i'd go off. But it was when i pressed the power button, it would turn off.
I had enough and wanted to flash the official Samsung Based 4.3 firmware. But when i tried to do this, Odin said that
"There is no PIT partition."
I went into Recovery Mode ( what at the moment was accesable), and wanted to do it manually. I wiped data / cache / dalvik.
(i used philz_touch_6.15.4-jfltexx as my recovery)
But i also formatted cash - preload - system - data
i also wanted to format data SD (media e.g. )
When i tried to format data SD, it went stuck. I couldnt get into recovery after that. But i could go into download mode.
I read about it on XDA, and I downloaded the PIT and tried to flash PIT and official firmware at the same time.
It said:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
How is it that it sais 'no PIT partition' if i put the PIT file in?
I cant start my phone.. i cant get into recovery.. i only can get in download mode...
What can i do guys?
Ive read multiple threads, but it wasnt really exactly my problem, so that why i made this post.
I hereby thank you.
iillkkaayy
EDIT::
I retried to flash the pit file and the official firmware with odin 3.07
Auto Reboot off
Re-Partition check
F. Reset Time check
It also failed, but come across a different error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUENA4_I9505YXXENA3_I9505XXUENA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> sbl1.mbn
<ID:0/011> NAND Write Start!!
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl2.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> sbl3.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> rpm.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> aboot.mbn
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I Fixed it myself. How?
I flashed the KitKat samsung based leak.
It wasnt a .tar.md5 file , but multiple files
BL
AP
CP
CSC
It worked for me. Hopefully it will help someone else too.
Have a great day.
The Samsung leak
Hi where did you get the Samsung file?
OK found the file. But get this:
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)