Hi Guys
Following an issue I had earlier when I upgraded my rom, I decided to flash a stock 4.3 rom onto my i19505. I keep getting the following errors in odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505BTUEMK5_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> sbl2.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> sbl3.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> rpm.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> aboot.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone assist me?
Thanks
Chris
scientificharmony said:
Hi Guys
Following an issue I had earlier when I upgraded my rom, I decided to flash a stock 4.3 rom onto my i19505. I keep getting the following errors in odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505BTUEMK5_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> sbl2.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> sbl3.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> rpm.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> aboot.mbn
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone assist me?
Thanks
Chris
Click to expand...
Click to collapse
Did you flash the 4.4.2 kitkat leak fna5 by any chance? because if you did , you cannot downgrade your phone to stock 4.3 Mate
Repulsa said:
Did you flash the 4.4.2 kitkat leak fna5 by any chance? because if you did , you cannot downgrade your phone to stock 4.3 Mate
Click to expand...
Click to collapse
Hi
No It was the 4.0 Diamond Dogs Foxhound Rom.
Is there a way to fix this by flalshing something in Odin?
scientificharmony said:
Hi
No It was the 4.0 Diamond Dogs Foxhound Rom.
Is there a way to fix this by flalshing something in Odin?
Click to expand...
Click to collapse
Too bad because it show's that when your flashing the 4.3 stock rom your having a problem because of the newbootloader . im guessing you flashed the fna5 newbooloader in order to fix the wifi/issue on foxhound sorry mate , but you can try to flash your 4.3 Nandroid back up via recovery.
I mean,, is it possible to flash FoxHound_Diamond_Dogs_4.0_Kitkat_4.4.2_By_Snakes_GT-I9505
by odin,,, in some way?
scientificharmony said:
I mean,, is it possible to flash FoxHound_Diamond_Dogs_4.0_Kitkat_4.4.2_By_Snakes_GT-I9505
by odin,,, in some way?
Click to expand...
Click to collapse
No sir ! only custom recovery.
I have a message on my phone when i try and boot.
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
also, i flashed this boot loader...
BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5
scientificharmony said:
I have a message on my phone when i try and boot.
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
also, i flashed this boot loader...
BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5
Click to expand...
Click to collapse
Pull out your battery and wait atleast 10 to 20 sec and put it back , and go to recovery (Power+Volumeup) then do a fullwipe and flash Foxhound. if you still having an issue the best thing you can do is flash the Stock 4.4.2 leak then flash a custom recovery via odin then flash foxhound. . have a nice day.
Repulsa said:
Pull out your battery and wait atleast 10 to 20 sec and put it back , and go to recovery (Power+Volumeup) then do a fullwipe and flash Foxhound. if you still having an issue the best thing you can do is flash the Stock 4.4.2 leak then flash a custom recovery via odin then flash foxhound. . have a nice day.
Click to expand...
Click to collapse
If i do a full wipe, will it not erase fox hound from my sd? i think its already been erased...
scientificharmony said:
If i do a full wipe, will it not erase fox hound from my sd? i think its already been erased...
Click to expand...
Click to collapse
If you did fullwipe i dont think your external (Sdcard you bought) gonna get delete only internal bro (memory integrated in to your phone)
Thats the thing, I dont have an external SD. only internal.
The only thing I think can fix this is a rom that I can flash in Odin
Related
Hey everyone. I flashed the MI8 leak of TW 4.3, and it was decent, but I flashed the Google Edition by Jamal2367 and WiFi doesn't work, so I'm assuming it's because of this new bootloader. Is there anyway to either go back to the 4.2.2 bootloader (I assume it's highly unlikely) or to get WiFi and everything working?
Thanks
EDIT: Went to attempt to flash MH8 again (4.2.2) and even with the aboot file in it, Odin seems to be flashing it without a problem?
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
So could that mean it succesfully downgraded?
nellisere said:
Hey everyone. I flashed the MI8 leak of TW 4.3, and it was decent, but I flashed the Google Edition by Jamal2367 and WiFi doesn't work, so I'm assuming it's because of this new bootloader. Is there anyway to either go back to the 4.2.2 bootloader (I assume it's highly unlikely) or to get WiFi and everything working?
Thanks
Click to expand...
Click to collapse
Try flash NON-HLOS Bin for older firmware
LastStandingDroid said:
Try flash NON-HLOS Bin for older firmware
Click to expand...
Click to collapse
Didn't try that before downgrading but looks like it did downgrade the bootloader! No more eMMC boost thing in the bootloader. Already had Knox warranty void 0x1 so couldn't see if it triggered it. Now going to try Google Edition ROM again.
EDIT: Yes, after downgrading from MI8 (4.3 inc bootloader) to MH8 worked, and now WiFi works on 4.2.2 roms!
Hello, I hope you could help me.
I tried to flash original rom with Odin, so I could install cwm and root, but that's what happened... It's bricked now...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005GBLGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks!
Emil
does it start normally???certainly no so flash again with odin and get last 3.09 version
from which rom version are you starting???
rayman95 said:
does it start normally???certainly no so flash again with odin and get last 3.09 version
from which rom version are you starting???
Click to expand...
Click to collapse
I bought it yesterday. It said it needed update, so I updated , this update is from July 2014.
It was working fine, I wanted to install recovery and flashed original rom, and then it started giving me those error messages with Odin 3.09.
I've tried Odin 3.07, the same result.
Then I found a polish, 4 files stock rom (BT, Phone, PDA and CSC) it passed, but I locked it and it doesnt work good. Sometimes it does not start... What can I do?
Thanks in advance!
Emil
emilloparski said:
Hello, I hope you could help me.
I tried to flash original rom with Odin, so I could install cwm and root, but that's what happened... It's bricked now...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005GBLGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks!
Emil
Click to expand...
Click to collapse
What did you select in Odin, which buttons? PDA? Or which? That could've bricked it...
emilloparski said:
Hello, I hope you could help me.
I tried to flash original rom with Odin, so I could install cwm and root, but that's what happened... It's bricked now...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005GBLGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks!
Emil
Click to expand...
Click to collapse
i got desame error but ive already done with this probem. TRY tO CHANGE STOCK FIRMWARE YOU HAVE TRYING TO FLASH (THE FIRMWARE YOU HAVE TO DOWNLOAD IS NEAR IN YOUR COUNTRY NOT FAR IN YOUR COUNTRY) TRY NH1 FIRMWARE. if i help you press thanks.
emilloparski said:
Hello, I hope you could help me.
I tried to flash original rom with Odin, so I could install cwm and root, but that's what happened... It's bricked now...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005GBLGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks!
Emil
Click to expand...
Click to collapse
Well, it didn't pass. go to samobile and download your region's firmware and try again. Which bootloader did you use? KK? If you took KK you might have to try and solve the issue with bootloader. If you don't care about root, try installing another kernel and install CWM. Might fix it.
Did you tick 'Re-Partition' in Odin?
Pagnell said:
Did you tick 'Re-Partition' in Odin?
Click to expand...
Click to collapse
Ignore this one. Do NOT tick Re-partition.
Pagnell... if you want to be helpful, as least fully state what you are trying to tell.
Your question might make him tick that selection.
Solved. I was told that any stock rom from my region would work. Since I bought it and live in Bulgaria, I tried the BG one. Didn't match. Itried it 4-5 times. Then I tried highly recommended polish one which was older, but it locked my phone ( btw it's a polish imported phone ). Then I tried last german, last Bulgarian and last UK. Didn't help. Until I finally tried last Slovakian which worked and it' similiar to the last Polish that I was planning to test after that. So Slovakian Telekom finally worked. And I was about to try it even earlier, but there was this recommended 4 file polish one that everyone was talking about that "works"
Hi guys.
I have an italian unbranded phone n9005.
Today i've tried flashing a german and a UK n9005 lollipop rom from sammobile with odin.
In both cases odin failed the last step while flashing hidden.img and gave me error "fail (size)"
Now i can still access to download mode but i have no clue of what to do.
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOA5_N9005VFGGBOA2_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for your time
Try This
is your note3 rooted or stock ?
I have a stock Note3 LTE and downloaded the XEO (polish) from sammobile firmwares and it worked perfectly because it is an unlocked rom. You can download it from here http://samsung-updates.com/device/?id=SM-N9005&details=Galaxy_Note_3__Snapdragon Roms that are network branded can quite often fail in the way yours did.
To get out of your current position you have 2 choices...You can download the above and simply follow normal Odin procedure or you can flash your old rom again.
Uxepro said:
Hi guys.
I have an italian unbranded phone n9005.
Today i've tried flashing a german and a UK n9005 lollipop rom from sammobile with odin.
In both cases odin failed the last step while flashing hidden.img and gave me error "fail (size)"
Now i can still access to download mode but i have no clue of what to do.
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOA5_N9005VFGGBOA2_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for your time
Click to expand...
Click to collapse
Solved. Just flash an unbrand FW on an unbrand phone
billd2439 said:
is your note3 rooted or stock ?
I have a stock Note3 LTE and downloaded the XEO (polish) from sammobile firmwares and it worked perfectly because it is an unlocked rom. You can download it from here http://samsung-updates.com/device/?id=SM-N9005&details=Galaxy_Note_3__Snapdragon Roms that are network branded can quite often fail in the way yours did.
To get out of your current position you have 2 choices...You can download the above and simply follow normal Odin procedure or you can flash your old rom again.
Click to expand...
Click to collapse
Will this work on my rooted n90005.
And can you send me a link to step by step rooting guide?
Sent from my SM-N9005 using Tapatalk
Couldn't be certain but I believe if you install an official rom on a rooted phone the root is lost. That would meet it should install no problem and restore the phone to stock.
So I tried rooting my girlfriends VZW S4. I got booted into Safestrap recovery and tried installing a custom ROM... every rom I had failed. So I just wiped the cache, still didn't work. Now I reboot the phone and im stuck at the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Odin will NOT WORK with ANY build I try to flash it. I get that god damn Fail (Auth!) error EVERY TIME.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUEMK2_I545VZWEMK2_I545VRUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone help
says SW REV. CHECK FAIL : fused : 6 , binary : 5 on the phone after odin fails.
Tried a bunch of things, nothing yet.
EDIT:
http://galaxys4root.com/galaxy-s4-stock-firmware/
found a stock one that is actually working.... so far so good
The reason why it doesn't work is because you are flashing old firmwares. You can't flash 4.2.2 and 4.3 once you are on 4.4.2. You can only flash 4.4.2.
Lennyz1988 said:
The reason why it doesn't work is because you are flashing old firmwares. You can't flash 4.2.2 and 4.3 once you are on 4.4.2. You can only flash 4.4.2.
Click to expand...
Click to collapse
Now that I am on 4.4.2, is this phone stuck with that? I managed to get safestrap on it, but I still cannot install any custom ROMs on it. Tried partitioning a new piece and installing cyanogen on there, no luck, just bootloops... this is a headache!
ThoR294 said:
Now that I am on 4.4.2, is this phone stuck with that? I managed to get safestrap on it, but I still cannot install any custom ROMs on it. Tried partitioning a new piece and installing cyanogen on there, no luck, just bootloops... this is a headache!
Click to expand...
Click to collapse
No, this is the result of "play" with a SAMSUNG device :highfive:
My s3 took 5 min to install cyanogen lol. Womp womp
ThoR294 said:
My s3 took 5 min to install cyanogen lol. Womp womp
Click to expand...
Click to collapse
Yes but my guess is your s3 isn't a Verizon version.
ps I don't think CM works on your version. I think you can only flash custom roms that match your kernel.
Hello,
First I was on 4.4.2, then I've switch to 5.0. ( without root priv )
Today I've downgrade from 5.0 to 4.4.2, and my "note 3" bricked!
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNH1_N9005TMNGNL2_N9005XXUGNH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then I've download .pit file from here, and my "note 3" got re-partition.
Now I want root my android, but I got this error ( using this tut here )
Code:
NAND Write Start!!
<ID:0/004> FAIL!
I need your help, I want clean (rom, pit, 4.4.2 system) with root for my "note 3- n9005"
Thanks.
your first mistake: updated to loli(s..t)pop.
second: not saved rom creddentials
solution: kies 3 or odin
dancapitan said:
your first mistake: updated to loli(s..t)pop.
second: not saved rom creddentials
solution: kies 3 or odin
Click to expand...
Click to collapse
when my note bricked, I try restore from kies, but I can't
now I need clean .pit and 4.4.2 software with root
a7m3d said:
when my note bricked, I try restore from kies, but I can't
now I need clean .pit and 4.4.2 software with root
Click to expand...
Click to collapse
1. That .pit file is good but you have to flash the correct firmware for it: HERE. Follow the steps of that thread too for flash the firmware correctly.
2. Take out the battery of your device when the process of flashing finish (wait 10 sec.). Put it in again.
3. Boot your device in Stock Recovery and select: Wipe data/Factory reset.
4. Select "Reboot System Now" option then.
5. Root it then with that method you posted b4.
Joku1981 said:
1. That .pit file is good but you have to flash the correct firmware for it: HERE. Follow the steps of that thread too for flash the firmware correctly.
2. Take out the battery of your device when the process of flashing finish (wait 10 sec.). Put it in again.
3. Boot your device in Stock Recovery and select: Wipe data/Factory reset.
4. Select "Reboot System Now" option then.
5. Root it then with that method you posted b4.
Click to expand...
Click to collapse
1- I've download PIT from here, and download firmware from here, and flash the firmware.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005DBTENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
2- when flash finish, I've take out my battery from device. ( I didn't put "auto-reboot" in Odin3)
3- I've Wipe data/Factory reset with Stock Recovery.
4- I've Reboot System.
5- I try to root it with http://androidxda.com/root-samsung-galaxy-note-3-sm-n9005
but the problem:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
a7m3d said:
1- I've download PIT from ...
Click to expand...
Click to collapse
1. Try flashing this custom recovery first: HERE.
2. Flash this FILE via TWRP. Reboot then.
Joku1981 said:
Try flashing this custom recovery first: ONE.
Click to expand...
Click to collapse
I've going to setting, and enable developer mode then I've root my phone again and it's rooted!
but my phone still reboot and reboot (dosen't stop??)
edit; I've done ‘wipe cache partition.’ and it's work now
Please close the topic