[Q] Bricked VZW S4 - Odin Fail! (Auth) - Galaxy S 4 Q&A, Help & Troubleshooting

[Q] Bricked VZW S4 - Odin Fail! (Auth) - Galaxy S 4 Q&A, Help & Troubleshooting

So I tried rooting my girlfriends VZW S4. I got booted into Safestrap recovery and tried installing a custom ROM... every rom I had failed. So I just wiped the cache, still didn't work. Now I reboot the phone and im stuck at the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Odin will NOT WORK with ANY build I try to flash it. I get that god damn Fail (Auth!) error EVERY TIME.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUEMK2_I545VZWEMK2_I545VRUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Someone help
says SW REV. CHECK FAIL : fused : 6 , binary : 5 on the phone after odin fails.
Tried a bunch of things, nothing yet.
EDIT:
http://galaxys4root.com/galaxy-s4-stock-firmware/
found a stock one that is actually working.... so far so good

The reason why it doesn't work is because you are flashing old firmwares. You can't flash 4.2.2 and 4.3 once you are on 4.4.2. You can only flash 4.4.2.

Lennyz1988 said:
The reason why it doesn't work is because you are flashing old firmwares. You can't flash 4.2.2 and 4.3 once you are on 4.4.2. You can only flash 4.4.2.
Click to expand...
Click to collapse
Now that I am on 4.4.2, is this phone stuck with that? I managed to get safestrap on it, but I still cannot install any custom ROMs on it. Tried partitioning a new piece and installing cyanogen on there, no luck, just bootloops... this is a headache!

ThoR294 said:
Now that I am on 4.4.2, is this phone stuck with that? I managed to get safestrap on it, but I still cannot install any custom ROMs on it. Tried partitioning a new piece and installing cyanogen on there, no luck, just bootloops... this is a headache!
Click to expand...
Click to collapse
No, this is the result of "play" with a SAMSUNG device :highfive:

My s3 took 5 min to install cyanogen lol. Womp womp

ThoR294 said:
My s3 took 5 min to install cyanogen lol. Womp womp
Click to expand...
Click to collapse
Yes but my guess is your s3 isn't a Verizon version.
ps I don't think CM works on your version. I think you can only flash custom roms that match your kernel.

Related

Plss help me!

Hi,
I wanted to go back to my stock rom after installing Cynagogenmod. But suddenly odin gave me a fail and when I restarted my phone it gave me this message: Firmware upgrade encountered an issue. Please select recovery mode in kies & try again. I have tried everything! Please help me!

alistylow said:
Hi,
I wanted to go back to my stock rom after installing Cynagogenmod. But suddenly odin gave me a fail and when I restarted my phone it gave me this message: Firmware upgrade encountered an issue. Please select recovery mode in kies & try again. I have tried everything! Please help me!
Click to expand...
Click to collapse
Re-Flash it with ODIN
are you putting the phone into download mode?

winwiz said:
Re-Flash it with ODIN
are you putting the phone into download mode?
Click to expand...
Click to collapse
I already tried te reflash it but it gives me a fail everytime! It gives me this code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505PHNBMG4_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

alistylow said:
I already tried te reflash it but it gives me a fail everytime! It gives me this code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505PHNBMG4_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
User the usb ports in the back of your pc. If that didn't work try a different pc.

Make sure that Kies is not running and all Kies processes are closed.
Open Task Manager and double chek this.
This is a very important step as Kies can interfer with Odin.
Make sure that you have downloaded the correct firmware from Sammobile.
Turn off phone completely
Wait a couple of seconds
start phone in Download mode
Open Odin
Connect phone to PC.
Load the downloaded firmware (from Sammobile) as PDA
Leave Auto Reboot and F. Reset checked and hit Start.
If it fails again, try with another version of Odin.
Perhaps Odin 3.07 will work?

Also, and I know this sounds stupid, use a different USB cable or the original Samsung one if you're not already... Made the world of difference when I was flashing....

[Q] Help - Bricked S4 i9505

Hi guys,
I rooted my phone(GT-i9505) a few days ago and unlike previous phones I began to have troubles where the phone would reset randomly and freeze, so I thought tonight I would unroot it using Odin. It went through the motions of whatever it needed to do and showed this message
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
For some reason or another I can restart the phone into download mode but if I try to get it into recovery mode for example it just shows me a screen with a yellow triangle saying "Firmware update encountered an issue. Please select recovery mode in Kies and try again."
But Kies wont recognize my phone?
I have tried to repeat the proces, choosing to use a separate PIT file, I have selected different options eg. Selected/Unselected re-partiton and Auto reboot. Nothing has worked so far?
Im really stuck on this one. Any help would be appreciated thanks

[Q] Galaxy note 3 lollipop Flashing fail please help

Hi everyone,
Tried installing HK version of Lollipop onto my Australian Note 3 using Odin. encountered an error and ended up soft bricked.
Searched various forums and posts and tried to flash the Telstra N9005XXUENE3_N9005TELENE1_N9005XXUENE3_HOME.tar.md 5 which is the stock rom I had on it before.
However Odin keeps failing with this error message:
ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005TELENE1_N9005XXUENE3_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Have tried everything! please help!!

please try flashing again, but use a lollipop pit file for your device. (PIT file is not the same for HK Version and N9005)

how did you go flashing hk version. i want to update to stock lollipop but im not sure what version to use. will latest do? i have a telstra sm-n9005.

CheapMerc said:
how did you go flashing hk version. i want to update to stock lollipop but im not sure what version to use. will latest do? i have a telstra sm-n9005.
Click to expand...
Click to collapse
Hi,
HK version was no good...I ended up using the Polish version which worked fine.
Try that one.

mukid728 said:
Hi everyone,
Tried installing HK version of Lollipop onto my Australian Note 3 using Odin. encountered an error and ended up soft bricked.
Searched various forums and posts and tried to flash the Telstra N9005XXUENE3_N9005TELENE1_N9005XXUENE3_HOME.tar.md 5 which is the stock rom I had on it before.
However Odin keeps failing with this error message:
ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005TELENE1_N9005XXUENE3_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Have tried everything! please help!!
Click to expand...
Click to collapse
try to download the latest stock rom for your mobile in sammobile. After that try to flash via ODIN

[Q] Help! Stuck Recovery Boot and All Odin Fail! (Auth)

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
All flashes fail. Full Tar,Firmware,Kernel, etc...
Just want phone to work again rooted or not, kitkat, lollipop, whatever...
Plz Help =)

beagler89 said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
All flashes fail. Full Tar,Firmware,Kernel, etc...
Just want phone to work again rooted or not, kitkat, lollipop, whatever...
Plz Help =)
Click to expand...
Click to collapse
What happened to cause you the need to odin to NCG?
Are you using the original data cable? Try a different USB port. Try a different version of odin.

Tulsadiver said:
What happened to cause you the need to odin to NCG?
Are you using the original data cable? Try a different USB port. Try a different version of odin.
Click to expand...
Click to collapse
Yes original cable
Tried to revert back to kitkat, it passed. Now it goes to Samsung Splash Screen then reboots to recovery.
All flashes end the same way, from any version. Have factory reset and everything else.
Nothing will pass.

What is/was the FW you were on before using Odin?

Dudash said:
What is/was the FW you were on before using Odin?
Click to expand...
Click to collapse
OC4

beagler89 said:
OC4
Click to expand...
Click to collapse
Download and flash the OC4 .tar from sammobile.

flashing failure for note 4 SM-910F with odin need some help

hi everyone i'm new to this forum so bare with me please.
i recently bought a galaxy note 4 sm-910F and it was rooted, i wanted to get rid of the root in order to get the updates for android (because the phone is running kit kat) but i couldn't after doing some research i found that i have to flash the stock firmware of lollipop for my model using Odin. i checked the usb debugging and followed the instructions but when i press start in oddin here's what comes :
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me i want to get rid of this root . thank you very much in advance

Try kies Samsung

Database Users

welcome

[Q] Bricked VZW S4 - Odin Fail! (Auth) - Galaxy S 4 Q&A, Help & Troubleshooting

The reason why it doesn't work is because you are flashing old firmwares. You can't flash 4.2.2 and 4.3 once you are on 4.4.2. You can only flash 4.4.2.

My s3 took 5 min to install cyanogen lol. Womp womp

ThoR294 said: My s3 took 5 min to install cyanogen lol. Womp womp Click to expand... Click to collapse Yes but my guess is your s3 isn't a Verizon version. ps I don't think CM works on your version. I think you can only flash custom roms that match your kernel.

Related

Plss help me!

[Q] Help - Bricked S4 i9505

[Q] Galaxy note 3 lollipop Flashing fail please help

[Q] Help! Stuck Recovery Boot and All Odin Fail! (Auth)

flashing failure for note 4 SM-910F with odin need some help

Categories

Resources