[Q] Help - Bricked S4 i9505 - Galaxy S 4 Q&A, Help & Troubleshooting

Hi guys,
I rooted my phone(GT-i9505) a few days ago and unlike previous phones I began to have troubles where the phone would reset randomly and freeze, so I thought tonight I would unroot it using Odin. It went through the motions of whatever it needed to do and showed this message
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
For some reason or another I can restart the phone into download mode but if I try to get it into recovery mode for example it just shows me a screen with a yellow triangle saying "Firmware update encountered an issue. Please select recovery mode in Kies and try again."
But Kies wont recognize my phone?
I have tried to repeat the proces, choosing to use a separate PIT file, I have selected different options eg. Selected/Unselected re-partiton and Auto reboot. Nothing has worked so far?
Im really stuck on this one. Any help would be appreciated thanks

Related

Plss help me!

Hi,
I wanted to go back to my stock rom after installing Cynagogenmod. But suddenly odin gave me a fail and when I restarted my phone it gave me this message: Firmware upgrade encountered an issue. Please select recovery mode in kies & try again. I have tried everything! Please help me!
alistylow said:
Hi,
I wanted to go back to my stock rom after installing Cynagogenmod. But suddenly odin gave me a fail and when I restarted my phone it gave me this message: Firmware upgrade encountered an issue. Please select recovery mode in kies & try again. I have tried everything! Please help me!
Click to expand...
Click to collapse
Re-Flash it with ODIN
are you putting the phone into download mode?
winwiz said:
Re-Flash it with ODIN
are you putting the phone into download mode?
Click to expand...
Click to collapse
I already tried te reflash it but it gives me a fail everytime! It gives me this code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505PHNBMG4_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
alistylow said:
I already tried te reflash it but it gives me a fail everytime! It gives me this code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505PHNBMG4_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
User the usb ports in the back of your pc. If that didn't work try a different pc.
Make sure that Kies is not running and all Kies processes are closed.
Open Task Manager and double chek this.
This is a very important step as Kies can interfer with Odin.
Make sure that you have downloaded the correct firmware from Sammobile.
Turn off phone completely
Wait a couple of seconds
start phone in Download mode
Open Odin
Connect phone to PC.
Load the downloaded firmware (from Sammobile) as PDA
Leave Auto Reboot and F. Reset checked and hit Start.
If it fails again, try with another version of Odin.
Perhaps Odin 3.07 will work?
Also, and I know this sounds stupid, use a different USB cable or the original Samsung one if you're not already... Made the world of difference when I was flashing....

YET ANOTHER Firmware upgrade encountered an issue.Please select recovery mode in Kies

Hello.
From the very begining I would like to say that I've been searching for solution for 6 hours already through all possible forums and known issues , trying found suggestions but still I have a problem.
I wanted to update my Android from 4.4.2 (STOCK ROM) to another and newer 4.4.2 (STOCK ROM) version but ODIN 3.09 gave ma an error:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNH2_I9505PLSGNH1_I9505XXUGNH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also tried on various versiond of ODIN - the same results.
Now my phone is not able to launch - it gives me only the screen with
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Click to expand...
Click to collapse
In KIES I can't do the emergency recovery mode because KIES can't see the device. I've tried on Windows with KIES3 and KIES but also on KIES for MAC - all with the same result ;(
I don't know what to do, I'm hopeless - could you help me somehow ??
Change of USB cable/port and verify if Kies 3 is completely closed when you are using ODIN.

[Q] Botched Downgrade with Odin (Galaxy S5 SM-G900A)

I managed to soft brick my Galaxy S5 from AT&T and this happened when I was trying to downgrade to 4.4.2 Kitkat so that I could root it, and i have basically created a bootloop to where every time I shut it down and start it up, all I get is the "Firmware upgrade encountered an issue. Pleases select recovery mode in Kies & try again) the only problem is that Kies isn't connecting my phone and I've tried both versions of Kies. Kies and it's processes are killed when I use odin. I can still use Download mode, but I really need to get my phone to at least boot up again. All the data was wiped so I don't care about getting it back, but I just really need some help. The Odin text that I keep getting is:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks in advance.

flashing failure for note 4 SM-910F with odin need some help

hi everyone i'm new to this forum so bare with me please.
i recently bought a galaxy note 4 sm-910F and it was rooted, i wanted to get rid of the root in order to get the updates for android (because the phone is running kit kat) but i couldn't after doing some research i found that i have to flash the stock firmware of lollipop for my model using Odin. i checked the usb debugging and followed the instructions but when i press start in oddin here's what comes :
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me i want to get rid of this root . thank you very much in advance
Try kies Samsung

Bricked Galaxy S5 Canadian Version G900W8

So I've installed a custom ROM on this phone about 2 years ago. It's my girlfriends phone.
Every once in a while when she turns her phone on it would go into a boot loop several times, and eventually go into the system and function normally. It was very intermittent, but it wasn't a big deal. Yesterday the phone was stuck in a permanent boot loop. What was interesting is that i could not enter into a Recovery Mode, just download mode.
So i figured it was time to just simply flash the original stock ROM.
ODIN 3.12.7
ROM: FMC-G900W8VLS1DPF3-20160725152930 (Canadian Koodo Android 6.0.1)
Flash was completely successful (I've flashed and unbricked many phones so I am very familiar with the process). This is the ODIN log file
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> cache.img.ext4
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Phone restarts with blue Recovery Booting message and is stuck in a boot loop again. Boot loop is always trying to go Into Recovery Mode (just like previously before flash). I know that flash was successful because I no longer have the yellow Warranty Bit message i did when custom ROM was installed, So then i figured maybe i need the PIT file. I found a pit file SM-G900W8_pit_16GB.
I've then re-flashed again with this PIT file (Auto-reboot, re-partition, and F. Reset Time checked) and got an error message
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what else to do. The phone has been dropped quite a few times which is obvious by its appearance. Does anybody have any suggestions?
srdjmor said:
So I've installed a custom ROM on this phone about 2 years ago. It's my girlfriends phone...
Click to expand...
Click to collapse
I don't have this specific device but, your best bet is to post this question within the following Discussion thread for your specific device.
https://forum.xda-developers.com/showthread.php?t=3228804
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Categories

Resources