Hi guys.
I have an italian unbranded phone n9005.
Today i've tried flashing a german and a UK n9005 lollipop rom from sammobile with odin.
In both cases odin failed the last step while flashing hidden.img and gave me error "fail (size)"
Now i can still access to download mode but i have no clue of what to do.
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOA5_N9005VFGGBOA2_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for your time
Try This
is your note3 rooted or stock ?
I have a stock Note3 LTE and downloaded the XEO (polish) from sammobile firmwares and it worked perfectly because it is an unlocked rom. You can download it from here http://samsung-updates.com/device/?id=SM-N9005&details=Galaxy_Note_3__Snapdragon Roms that are network branded can quite often fail in the way yours did.
To get out of your current position you have 2 choices...You can download the above and simply follow normal Odin procedure or you can flash your old rom again.
Uxepro said:
Hi guys.
I have an italian unbranded phone n9005.
Today i've tried flashing a german and a UK n9005 lollipop rom from sammobile with odin.
In both cases odin failed the last step while flashing hidden.img and gave me error "fail (size)"
Now i can still access to download mode but i have no clue of what to do.
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOA5_N9005VFGGBOA2_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for your time
Click to expand...
Click to collapse
Solved. Just flash an unbrand FW on an unbrand phone
billd2439 said:
is your note3 rooted or stock ?
I have a stock Note3 LTE and downloaded the XEO (polish) from sammobile firmwares and it worked perfectly because it is an unlocked rom. You can download it from here http://samsung-updates.com/device/?id=SM-N9005&details=Galaxy_Note_3__Snapdragon Roms that are network branded can quite often fail in the way yours did.
To get out of your current position you have 2 choices...You can download the above and simply follow normal Odin procedure or you can flash your old rom again.
Click to expand...
Click to collapse
Will this work on my rooted n90005.
And can you send me a link to step by step rooting guide?
Sent from my SM-N9005 using Tapatalk
Couldn't be certain but I believe if you install an official rom on a rooted phone the root is lost. That would meet it should install no problem and restore the phone to stock.
Related
Hi Guys,
I have been having trouble with flashing my Note 3 64g sm-n9005. It is a international model that that Singapore (sin-tel) firmware. I have tried and failed to flash Australian stock ROM with odin3.09, 3.07 and 1.85. The output from Odin is below, as it tries to write the hidden file.
Any help would be appreciated.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005XSAENE1_N9005XXUENE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
singularity.tgz said:
Hi Guys,
I have been having trouble with flashing my Note 3 64g sm-n9005. It is a international model that that Singapore (sin-tel) firmware. I have tried and failed to flash Australian stock ROM with odin3.09, 3.07 and 1.85. The output from Odin is below, as it tries to write the hidden file.
Any help would be appreciated.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005XSAENE1_N9005XXUENE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It could be the pit files don't match. Terry flashing it's region (Singapore) firmware & see what happens.
Hello, I hope you could help me.
I tried to flash original rom with Odin, so I could install cwm and root, but that's what happened... It's bricked now...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005GBLGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks!
Emil
does it start normally???certainly no so flash again with odin and get last 3.09 version
from which rom version are you starting???
rayman95 said:
does it start normally???certainly no so flash again with odin and get last 3.09 version
from which rom version are you starting???
Click to expand...
Click to collapse
I bought it yesterday. It said it needed update, so I updated , this update is from July 2014.
It was working fine, I wanted to install recovery and flashed original rom, and then it started giving me those error messages with Odin 3.09.
I've tried Odin 3.07, the same result.
Then I found a polish, 4 files stock rom (BT, Phone, PDA and CSC) it passed, but I locked it and it doesnt work good. Sometimes it does not start... What can I do?
Thanks in advance!
Emil
emilloparski said:
Hello, I hope you could help me.
I tried to flash original rom with Odin, so I could install cwm and root, but that's what happened... It's bricked now...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005GBLGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks!
Emil
Click to expand...
Click to collapse
What did you select in Odin, which buttons? PDA? Or which? That could've bricked it...
emilloparski said:
Hello, I hope you could help me.
I tried to flash original rom with Odin, so I could install cwm and root, but that's what happened... It's bricked now...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005GBLGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks!
Emil
Click to expand...
Click to collapse
i got desame error but ive already done with this probem. TRY tO CHANGE STOCK FIRMWARE YOU HAVE TRYING TO FLASH (THE FIRMWARE YOU HAVE TO DOWNLOAD IS NEAR IN YOUR COUNTRY NOT FAR IN YOUR COUNTRY) TRY NH1 FIRMWARE. if i help you press thanks.
emilloparski said:
Hello, I hope you could help me.
I tried to flash original rom with Odin, so I could install cwm and root, but that's what happened... It's bricked now...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005GBLGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks!
Emil
Click to expand...
Click to collapse
Well, it didn't pass. go to samobile and download your region's firmware and try again. Which bootloader did you use? KK? If you took KK you might have to try and solve the issue with bootloader. If you don't care about root, try installing another kernel and install CWM. Might fix it.
Did you tick 'Re-Partition' in Odin?
Pagnell said:
Did you tick 'Re-Partition' in Odin?
Click to expand...
Click to collapse
Ignore this one. Do NOT tick Re-partition.
Pagnell... if you want to be helpful, as least fully state what you are trying to tell.
Your question might make him tick that selection.
Solved. I was told that any stock rom from my region would work. Since I bought it and live in Bulgaria, I tried the BG one. Didn't match. Itried it 4-5 times. Then I tried highly recommended polish one which was older, but it locked my phone ( btw it's a polish imported phone ). Then I tried last german, last Bulgarian and last UK. Didn't help. Until I finally tried last Slovakian which worked and it' similiar to the last Polish that I was planning to test after that. So Slovakian Telekom finally worked. And I was about to try it even earlier, but there was this recommended 4 file polish one that everyone was talking about that "works"
Hello guys!
I am on stock 4.4.2
Downloaded stock rom from sm.
Tried to flash - fail at hidden.img.ext
FLASh failed.
Now i can't boot my phone.
Knox is still on 0x0
Kies doesnt recognise my phone to try recovery...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BNL9_G900FVFG1BNL1_G900FXXU1BNL9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What to do?
The obvious answer is to flash the rom again in Odin.
If no joy with flashing Lollipop try and flash a Kitkat rom and then try flashing Lollipop again.
Try Odin 3.07
I had the same problem with 3.09, spend several hours flashing and downloading the FW again and again. I finally tried with Odin 3.07 and everything is OK.
apmos said:
Try Odin 3.07
I had the same problem with 3.09, spend several hours flashing and downloading the FW again and again. I finally tried with Odin 3.07 and everything is OK.
Click to expand...
Click to collapse
Will try now.
tried with 3.10.0 still nothing
Tried with stock 4.4.2. still the same....and on the other computer too with windows 7
before was doing on windows 8
So...odin 3.07:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BNL9_G900FVFG1BNL1_G900FXXU1BNL9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
NOT GOOD AT ALL!
I can't flash any rom to G900F with odin, can't boot my phone...constantly getting FAIL (SIZE)!
What to do next?
This is info from the screen:
ODIN MODE
PN: SM-G900F
CB: Samsung Official
SS: Official
RL (KK): OFF
KWV: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV
SECURE DOWLOAD: ENABLE
UDC START
Don't get it.
I have tried SPANISH firmware LOLIPOP 5.0 (unbranded) and it worked!?!
I am on Croatian VIP network, bought it there...tried to flash VIP's 4.4.2 and 5.0
and it failed everytime no matter to ODIN version....
So? What to do next? Why i am not able to flash my branded firmware?
Usually when that message appears in odin it means the the firmware you're trying to flash has not the same partitions as your memory, try to find pit file for your VIP version and then flash again using that file
Well let it fail then remove the cable put it back reset odin check repartition and flash put file.. your phone will work but i have not idea what is tha secure boot and download i am still searching.
Hi everyone,
Tried installing HK version of Lollipop onto my Australian Note 3 using Odin. encountered an error and ended up soft bricked.
Searched various forums and posts and tried to flash the Telstra N9005XXUENE3_N9005TELENE1_N9005XXUENE3_HOME.tar.md 5 which is the stock rom I had on it before.
However Odin keeps failing with this error message:
ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005TELENE1_N9005XXUENE3_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Have tried everything! please help!!
please try flashing again, but use a lollipop pit file for your device. (PIT file is not the same for HK Version and N9005)
how did you go flashing hk version. i want to update to stock lollipop but im not sure what version to use. will latest do? i have a telstra sm-n9005.
CheapMerc said:
how did you go flashing hk version. i want to update to stock lollipop but im not sure what version to use. will latest do? i have a telstra sm-n9005.
Click to expand...
Click to collapse
Hi,
HK version was no good...I ended up using the Polish version which worked fine.
Try that one.
mukid728 said:
Hi everyone,
Tried installing HK version of Lollipop onto my Australian Note 3 using Odin. encountered an error and ended up soft bricked.
Searched various forums and posts and tried to flash the Telstra N9005XXUENE3_N9005TELENE1_N9005XXUENE3_HOME.tar.md 5 which is the stock rom I had on it before.
However Odin keeps failing with this error message:
ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005TELENE1_N9005XXUENE3_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Have tried everything! please help!!
Click to expand...
Click to collapse
try to download the latest stock rom for your mobile in sammobile. After that try to flash via ODIN
Hello, I wiped my phone and accedently did everything including the OS.
It still had twrp on so I put a rom back on but I figured I would flash it back to stock. This is where I'm having problems.
Using odin3 it nearly finishes but gets an error right at the end.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> NON-HLOS.bin
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
The phone says not enough space...
Thanks guys.
did you wipe internal storage?
When? I wiped everything, then installed a rom, then tried to flash stock.
ive had that happen before. there is a place that twrp and odin doesnt wipe that android downloads and stores things to that i cant recall right off hand where it is. Somewhere in the root that odin and twrp dont touch. Probably in storage/emulated/ or storage/emulated/0
Are you sure, that you have right region (like BTU, VOD, XSD,...) that your phone needs? Looks like hidden.img fails - it's often because of wrong regioncode.