I updated to Jamal's RC2 and phone would bring up a blank screen as well as strange other bugs. Tried downgrading but have now somehow softbricked my phone.
Here are logs of ODIN:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> recovery.img
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> persdata.img.ext4
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> system.img.ext4
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005>
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help me please???
Thanks, Tony.
I managed to reflash PhillZ recovery. Lets see how I go from here...
Hi there,
Prior to flashing Jamals ROM where you on 4.3 or 4.2 firmware? If you were on 4.3 then you cannot downgrade to 4.2....That is probably why it failed in odin
Related
Help please
I was using a custom rom before and i decided to flash back to stock rom so i flashed this version
N9005XXUDMJ7_N9005DBTDMJ4_DBT
and in the end the flash failed and i got this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005DBTDMJ4_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
now my phone wont boot please help!!!
Please don't create duplicate threads for the same issue and keep bumping them... Be patient and hopefully someone will reply.
RULE 5. Post a message only once.
As a large forum we don't need unnecessary clutter.
You're free to edit your message as you like, so if you do not receive an answer revisit your message and see if you can describe your problem better.
Not everyone is online at the same time so it might take a while before you receive an answer.
RULE 16. Bumping Threads (posting simply to force a thread to the top of the thread queue)
Do not "bump" a thread more than once per 24 hours.
Did you ever find a solution ?
I have the exact same problem upgrading my Galaxy S4 with firmware 4.3.
I've been using cyanogenmod for a while but after updating it to android 4.3 i had some problems so i decided to move back to stock.
Now when i try to install the stock firmware through odin i get this.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK8_I9505OXXEMK3_I9505XXUEMK8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
i would really love some help
I've tried another usb port and it worked.. i guess i`m retarded
i receive it form customer hanfg on samsung logo , he say he try by odian to upload some file !!!
so i flash it all time error , but just succed on 4.4.2 after flash phone hang on samsung logo
and i can't enter to wipe device or to install stuck rom with sd card ,when i try i get on menu this photo
(recovery is not seandroid enforcing)
hitibiti said:
i receive it form customer hanfg on samsung logo , he say he try by odian to upload some file !!!
so i flash it all time error , but just succed on 4.4.2 after flash phone hang on samsung logo
and i can't enter to wipe device or to install stuck rom with sd card ,when i try i get on menu this photo
(recovery is not seandroid enforcing)
Click to expand...
Click to collapse
Hi,
It seems like you have a soft brick follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
Make sure you use the right PIT and the right stock rom for your phone
MAX 404 said:
Hi,
It seems like you have a soft brick follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
Make sure you use the right PIT and the right stock rom for your phone
Click to expand...
Click to collapse
thx for answer
i try still same problem , but itès strange i canèt wite any forware om it he just accept
I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar (4.4.2)
even other 4.4.2 from other provider can't accept it
also try 4.3 !!!!
any other suggestion ?
You need to give us more details. Post the Odin log here.
hitibiti said:
thx for answer
i try still same problem , but itès strange i canèt wite any forware om it he just accept
I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar (4.4.2)
even other 4.4.2 from other provider can't accept it
also try 4.3 !!!!
any other suggestion ?
Click to expand...
Click to collapse
Lennyz1988 said:
You need to give us more details. Post the Odin log here.
Click to expand...
Click to collapse
Hi
As Lennyz1988 said more detail , post log.......
flashed ok still same problem with this version ; I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUFNE1_I337MOYAFNE2_I337MVLUFNE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Click to expand...
Click to collapse
now i try this version with pit file
I337_16GB.pit
I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> NON-HLOS.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
now i try with
I337_16GB.pit
AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> persdata.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Click to expand...
Click to collapse
So, I've had horrible battery and performance issues. After several factory resets, and lots of troubleshooting I decided to try flashing the stock firmware via Odin. it complete with the below log, but now it boots all the way to the lock screen (not the setup wizard) and then flickers for a second and reboots.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910TUVU1ANIH_N910TTMB1ANIH_N910TUVU1ANIH_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/006> Added!!
<ID:0/006> Removed!!
<ID:0/006> Added!!
Nevermind. I didn't realize that wouldn't wipe data and I still needed to do it in recovery. After doing that it boots fine.
Im trying to flash N9005XXUGBOB6_N9005AUTGBOB1_N9005XXDUGBOA1_HOME.tar.md5 but i get this error. what should i do? help me please. thanks. this is a lollipop firmware.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOB6_N9005AUTGBOB1_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
nicoE. said:
Im trying to flash N9005XXUGBOB6_N9005AUTGBOB1_N9005XXDUGBOA1_HOME.tar.md5 but i get this error. what should i do? help me please. thanks. this is a lollipop firmware.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOB6_N9005AUTGBOB1_N9005XXUGBOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
hi,
where did u get those firmware's from? from sammobile? cause, they seem to be several at the same time. are u using the sm-n9005 lte note 3? where is your phone from, what is the firmware and baseband? maybe you can download this app https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en and take some screenshots with the information asked and upload them, so we can see where to go from there
(thanks @Joku1981 for showing people the app in other posts to help people)