Hi, guys,
I have following problem with my G2 D802, yesterday I left my on the front seat of the car, it was sun and hot, 15 minutes after that I take it, the phone was shut-ed down. After pressing power button the phone restart several times and boot without network connection. I read for possible solutions and found that if I left phone turned of without sim for a few minutes after that the device will recognize the sim and it's happened, unfortunately for a 5 minutes, after that the phone restarts and display massage insert proper sim card. Several times I restore factory settings, without susses. The phone display message service disabled.
The phone is bought from Vodafon Uk, and was unlocked with code from internet, works properly for a 6 months. The phone is not rooted.
Thank you in advance for your help.
Chukarov said:
Hi, guys,
I have following problem with my G2 D802, yesterday I left my on the front seat of the car, it was sun and hot, 15 minutes after that I take it, the phone was shut-ed down. After pressing power button the phone restart several times and boot without network connection. I read for possible solutions and found that if I left phone turned of without sim for a few minutes after that the device will recognize the sim and it's happened, unfortunately for a 5 minutes, after that the phone restarts and display massage insert proper sim card. Several times I restore factory settings, without susses. The phone display message service disabled.
The phone is bought from Vodafon Uk, and was unlocked with code from internet, works properly for a 6 months. The phone is not rooted.
Thank you in advance for your help.
Click to expand...
Click to collapse
Hi,
I just found solution, the problem was in the sim card, I ask my provider to change it and now everything is ok . It's more curios for me that other phone works properly with the same sim.
Related
Hi all ,
I have searched the forum and have not found anything on this problem.
About 3 weeks ago my Jamin decided not to go into 'Standby' mode. I kept pushing the power button but it did not go into standby. Holding it down didnt turn the phone off either. The only way it went into standby mode was by setting the power options to automatically going into standby after a certain time. When this did happen I could not bring it back from Standby mode either. The only way for me to bring the phone back was by removing the SD card then the phone would light up.
Everything else on the phone works fine I can receive and make phone calls etc.
I did a hard reset and everything seemed fine for a while then it would start happening again.
I sent the phone in for a warranty repair and it came back saying there was some kind of software corruption. I thought everything was fixed until it started doing it again. I thought it may be the SD card so I formatted that as well. But to my suprise .. after a hard reset and without the SD inserted it did it again. I have taken it back to the service centre 3 times already and each time they just said it was software corruption and the same problem would occur. Initiall after the first hard reset the power button would work fine after a short period. The first time was 1 day then it would slowly shorten until it did not work after a hard reset.
I was wondering if there was anyone that has run into this problem ... or may know what the problem maybe. The phone is currently on a 'field test' as described by the technicians. I was told they would replce the motherboard if nothing else worked...
I would honestly rather have a new phone .... cause I have not had it for 3 weeks .. going onto 1 month ... and its annyoing ...
Hi dkbaj!
Are you still having this problem? I got a Wizard 4 days ago and sometimes, if it went into standby, it won't come back to me again...
Greets, Mr. Vi
Can anyone help me get into my phone? For some reason it is no longer accepting the 4 digit password when I switch on the phone. It's not saying the number is wrong, just "Emergency phone calls can be made". It says this as soon as any numbers are entered and before the Unlock soft button is pressed. Pressing the Unlock button seems to do nothing.
I can still browse the phone using ActiveSync. Is there a file I can remove to prevent the phone from locking when I soft reset it?
I've got HTC home installed and the phone is running Windows 6 (an official O2 upgrade). I'd like to avoid hard resetting the phone if poss.
Thanks
Fixed
Tried the same 4 digit pin today and it worked! There must be a timed lock that kicks in after a number of tries. There was a clock running yesterday on the screen.
But the odd thing was that I hadn't tried to get into the phone for a couple of days.
Now a bit worried that this'll happen again randomly. Does anyone know how this works?
I am having a problem with my xperia x10 mini, the problem is not just mine. Apparently it is general.
Basically the phone doesn't turn on with certain SIM cards, if you press the on button the phone vibrates a bit but the screen stays black. If you remove the SIM card the SE logo appears and everything is normal.
There is a method to turn on the phone using PC Companion, once the phone is turned on everything is normal.
I have tested 15 different sims cards, 11 were the same model than mine, and didn't work, 4 were different model (1 year old) and the phone turn on normally.
The difference between the models is the golden part size, in the old ones it is bigger.
That is why I need to know if there is any way to debug the startup to find what the problem is or any boot log like /var/log/boot.log or /var/log/messages in the linux environment.
Thank you very much.
PS: My phone is rooted.
I have been trying to get past the No SIM card Emergency Call only screen to no avail. The four corners thing worked fine on our Cliq and Droid 2, but not on the Flipout. I don't need to root or unlock, I simply just want to use it on Wifi only... possible?
Thanks in advance.
Bypass Emergency call screen (solved)
Hi there Imanta...
I am also a new member & I had this exact same problem a few days ago. My Flipout for no apparent reason started refusing my orange 3G sim (No sim) and would only boot to emergency call screen .
The workaround for this problem I found to be simple . Insert a sim from a different carrier (I used virgin mobile), boot phone, when fully booted you should be presented with the phones network unlock screen giving you 2 options.
1: Enter network unlock code.
2: Dismiss.
Choose dismiss option & the phone should boot to its home screen unless you did a factory reset before inserting other carrier sim. If you did a reset then the phone will ask you to set a few perameters before booting to home screen.
Once fully booted the phone will be fully functioning albeit without carrier network access. You can also remove the wrong carrier sim & insert your own sim back & the phone will continue to boot to home screen from off until a wipe/factory reset is done again.
I hope this helps with your problem...
Stay Breezy & Be Lucky...
Peace....
Has this happened to anyone else.
Had phone for 2 weeks now & I keep getting a no sim card error when my phone comes out of the lock screen.
I installed a keep screen on app & as long as the phone does not go into lock screen the sim is fine but if i let it go into lock screen after a few minutes when i open phone i get No sim card inserted message.
Any ideas. This sounds more like a software issue than a hardware issue to me.
Cheers.
NEDSTER1972 said:
Has this happened to anyone else.
Had phone for 2 weeks now & I keep getting a no sim card error when my phone comes out of the lock screen.
I installed a keep screen on app & as long as the phone does not go into lock screen the sim is fine but if i let it go into lock screen after a few minutes when i open phone i get No sim card inserted message.
Any ideas. This sounds more like a software issue than a hardware issue to me.
Cheers.
Click to expand...
Click to collapse
Yes I sounds like a software issue try installing new software and see how that goes if not I would take the phone back for a replacement
I've had exactly the same problem with my LG Urbane 2 and the problem has occurred over three units. I assume that it's gonna take a firmware update to fix this. Right now I have to do a power cycle reset for a temporary fix.
What's a power cycle reset?