Related
I have a VX6900 that was Flashed to Cricket, I have GPSViewer, Google maps, HTC GPS tool, & Quick GPS. each one see that i have a GPS card but I have never gotten a lock on, I have followed many treads, but I still can't get the GPS to work on my phone. please Help
try gps toggle
my sister flashed her sprint version of the touch to cricket and she uses gps toggle to turn on/off the gps receiver. i suggest that you only have google maps and gps toggle installed, and nothing else. give it a try and let me know if it worked out for you!
good luck
I've been told that nothing i do will enable my GPS because it was flashed wrong
wakko69 said:
I have a VX6900 that was Flashed to Cricket, I have GPSViewer, Google maps, HTC GPS tool, & Quick GPS. each one see that i have a GPS card but I have never gotten a lock on, I have followed many treads, but I still can't get the GPS to work on my phone. please Help
Click to expand...
Click to collapse
I also have mine flashed to Cricket. I have never got a GPS lock on mine...
So anyone have any ideas??
did you get GPS working
Did you get GPS working with your cricket ROM If not let me know I can help you.
Please post anyway how to get GPS working with a Cricket ROM.. Also, do you or does anyone have suggestions for a Cricket ROM having just a stock Sprint Touch? Thanks in advance.
phigan said:
Please post anyway how to get GPS working with a Cricket ROM.. Also, do you or does anyone have suggestions for a Cricket ROM having just a stock Sprint Touch? Thanks in advance.
Click to expand...
Click to collapse
I will post you a nice tutorial tomorrow for the GPS and if you PM or post your email I will send you one of my cricket custom ROMS for the touch.
cricket ROM and tutorial
I have included a custom ROM in this tutorial
1st off credit is due to those that wrote these programs I only take credit for putting this all together.
#1 use msl grabber to get the msl/spc code found here
http://forum.ppcgeeks.com/showthread.php?t=43560
install via activesync or sd card and run on ppc.
#2 unlock with the 2.31 unlocker listed here
http://forum.ppcgeeks.com/showthread.php?t=20370
#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work.
http://www.htc.com/us/SupportDownloa...cat=2&dl_id=66
To do this connect USB to computer then Press power camera and Reset to get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
#4 Go to the following and download from windows drivers and unlocking tools
http://www.4shared.com/dir/13898363/...4/sharing.html
QPST
windows htc driver
activesync4.5
Ryanmogul diagnostics shortcuts
download the following
http://www.4shared.com/file/10597370...HMregedit.html
http://www.4shared.com/file/94425441...t5_0_31_7.html
Install Ryans diagnostics on ppc
Install QPST on computer
Install htc drivers on computer
Put phone into diag mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 117.29.223.11
pde port # 8080
pde transport IP
Position calculation mobile
Write to phone
close out
I would recommend now to flash a custom ROM here is a link to one of mine. http://www.4shared.com/file/135174580/27254c16/VOGUIMG.htmlinstall on a FAT32 formated 2gig or less msd card and rename to VOGUIMG.NBH THEN INSERT CARD AND PUT PHONE INTO BOOT LOADER AND FOLLOW INSTRUCTIONS.
You will need a cricket PRL to load through PST setting.
then go to this thread it will help you set up your pst setting correctly.
http://forum.xda-developers.com/showthread.php?t=492824 *NOTE* In some cricket markets you will need to change from EVRC to VOICE 13K to make outgoing calls. YOU CAN ALSO DOWNLOAD THE MMS CAB FROM HERE and then
Install the cricketwapmms cab
Do not try to open a data connection untill you have cricket service on the phone.
To authinticate your user name 10digit#@mycricket.com
you must have service.
Just a couple notes to have Email and push services work you MUST have the $15.00 HTML plan on your account and your phone must be listed in the system as a QA4 Evoke.
GPS may Require priming unless you use Ryans Googlemaps.cab
Credits go to ImCokeMaN for the unlocker and his great tutorial
and Ryanmogul6800 on XDA for his great software and his perfect PST setting.
Please let me know if this helped any or if I can be of any further assistance.
__________________
My GPS is working, But I had help there a guy in omaha that did it and it's running nice.
Good glad you got it running Also if you wanted push email to work there is a program called funambol that works ok with cricket.
hi i am tryin to get the gps running using your fix but all of the links are not working when i click on them but just to tell you what im working with i have the sprint vogue flashed to cricket and im running the new nsfan wm6.5 v16 rom and when i try gps viewer i cant find a fix, so is it the rom maybe cause my radio is 3.42.50....so can you point me in the right direction cause my phone is amazing but the gps is a setback and this is something that i really want spent weeks looking for something so thanks for all of your help
I apologize for that I don't know why they don't work here is the GPS1 setting that need to be entered in QPST. Your radio version is good to go for GPS.
while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 117.29.223.11
pde port # 8080
pde transport IP
Position calculation mobile
Write to phone
It looks like you have a good rom to be using so most of the links you don't really need.
Links you may need are below and they do work I just checked.
QPST http://www.4shared.com/file/101893747/6958b637/QPST_v27_Build_301.html
HTC driver http://www.4shared.com/file/101893703/a59b72a/WindowsHTCdrivers.html
Diagnostics shortcuts http://www.4shared.com/file/101893721/d661b484/RyanMogul_Diagnostic_Program_Shortcuts.html
thanks so much u will try it now and get back to you
I just purchased a MyTouch 3g (32b) off of eBay. I have been using tmobile sidekick prepaid on an iPhone 2g. I used the APN: internet2.voicestream.com. This also worked on my htc dash. I've read on the boards this doesn't work because tmobile blocks total internet plan (internet2) on the MyTouch. If so, is there another apn i can use? (I do not want people telling me why to switch to android data or anything, just alternatives for now).
Also, if there is no way to get internet to work so I can login, if I find a way past the initial login, would my internet never work?
Problems with bypassing initial login:
adb shell "error: device not found" (haven't resolved)
rooting- Method 1. Can not get sd card cid to create a goldcard
Method 2. Can't bypass initial login to install flashrec
Any other possible ways to bypass initial login?
Thank you for any help in advance.
One way is being in range of Wifi when doing the setup.
I am in range to wifi, that is why I was trying to use adb shell to enable it, but it wasn't working. Is there another way to enable wifi?
When I run adb shell I get this:
* Daemon not running. Starting it now. *
* Daemon started successfully *
Error: device not found
The mytouch is on and and plugged into the computer. I've tried it on Windows 7, mac, and xp.
Problems are all almost fixed. I had a friend put in his sim card and we rooted, and flashed Super-E on the MyTouch. Everything works find except the internet.
If its not rooted and u dont have a data plan it will not let you pass the setup to enable wifi. you would have to use a friends sim with data and setup then use wifi. with being able to use interent on the sidekick plan is another story which i am corently trying my best to figure out.
Thats exactly what I did, so if you have any progress on getting the sidekick data to work, please post on the thread or PM me.
Drakosha said:
Hello to all!
I think, I've finally found the reason why Chevron almost never works. After a few days of struggle, I managed to successfully unlock my HD2 three times in a row, all by the same trick.
The idea is to change the IP which Chevron emulates DURING the process of jailbreak. Here's step-by-step.
1 - Disable LAN card in your PC (Control Panel\Network and Internet\Network Connections\ right click on "Local Area Connection" and choose "disable"). It is very important to disable ALL connections, but you MUST remember which one is used for Internet access (see below, why).
2 - Do all the standard steps of unlock - install certificate, start WPConnect e.t.s. When Chevron fails to unlock - LEAVE IT OPEN.
3. Start Notepad and open hosts. Delete lines added by Chevron (at the bottom). Save. LEAVE NOTEPAD OPEN.
4. Press Win+R and enter IPConfig /flushdns , press "enter". CMD window will blink for a second - that's normal.
5. Press Win+R again (there will be IPConfig /flushdns typed already), but DO NOT PRESS "ENTER", just leave this window open.
6. Now the trick. Start WPConnect. WHILE it connects, continue to repeatedly press "Unlock" button in Chevron, until the black CMD window of WPconnect disappears. Chevron will fail to do its job, but that's in fact is the very thing we need.
7. Now, do not touch Chevron window, just return to Network Connections and ENABLE yor LAN card.
8. Go to Notepad and JUST CLICK "Save", do not alter anything inside.
9. Return to the window with the typed command IPConfig /flushdns . Press Enter.
10. Start WPConnect, WAIT until it disappears, and press "Unlock" button in Chevron. You're done - this time unlock would work.
At least, it worked for me 3 times in a row, while NO other ways worked.
Best regards - Draco.
P.S. If you have firewall - disable it before doing anything.
P.P.S. Win7 from NAND + MDJ Desire HD 4.4 from SD = best phone in the world
Click to expand...
Click to collapse
I have followed other guides posted here before, but none is as reliable as this one. Flawless. (Note that Zune is not required at all during this process, WPConnect is used)
Extra precautions :
1) Make sure port 443 is not used. You can open command prompt and type netstat -aon. From there, check which ip ends with 443 and check its PID number.
Once you have acquired the PID, go to command prompt and type tskill <PID number>.
2) Close skype.
3) Turn off your antivirus / firewall.
4) Make sure that during executing WPconnect.exe you're phone should NOT in be in sleep-mode/locked.
5) Make sure your host file located in C:\Windows\system32\drivers\etc\ is not read-only.
Credits to member Drakosha.
Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.
dissa said:
Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.
Click to expand...
Click to collapse
WPconnect is an executable used to connect your PC to wp7 devices without having to open ZUNE.
You can find out more about it here http://forum.xda-developers.com/showthread.php?p=10609273#post10609273
I test all solution, why not these one? I will reflash WP7 and test
Thanks for the TIP !
Ok.. now I know.. but the major problem is that I have Windows Xp.. so no chance to try tha trick... :-(
As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!
birel3107 said:
As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!
Click to expand...
Click to collapse
Can you read what is says in the window before it closes? Usually WPconnect just opens for 2-3 seconds and after a connection is established it will close back. If it says "Connection is established" or something like that, means you're good to go.
Read the steps carefully.
Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!
or this one!
yeah, that's just the same as I get when running WPConnect.
Yes but does it solve your problem?
I post 2 screenshot;
-Compltly close Zune
-Connect the device
Here's what i did, connect the phone to PC via USB, let zune opens and sync. Then close zune. Rune WPconnect.exe. It should say "Trying to establish a connection with blablabal" then "Connection established" and it will close. Try that.
G-ThGraf said:
Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!
Click to expand...
Click to collapse
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.
Niglet said:
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.
Click to expand...
Click to collapse
No it was for help birel !
Sent from my HTC HD2 using XDA App
I made it 3 times and it works !
BIG BIG Thanks!
G-ThGraf said:
I made it 3 times and it works !
BIG BIG Thanks!
Click to expand...
Click to collapse
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).
I'm from Russia. sorry for my english. stll, not working for me, i'v done all steps, but can't unlock my hd2.
birel3107 said:
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).
Click to expand...
Click to collapse
Hum, only (no lock--> set to never..)
I did, step by step what |OP| Posted !
I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.
Improve said:
I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.
Click to expand...
Click to collapse
This is the one that i use on Windows Seven 64 bits Ultimate
AS ABOVE
i've followed the steps , dont say im a leecher cause i read through all.
host file checked - no window developer services
regedit.exe - edited the registry
installed zune
installed microsoft sdk
activation code - gotten
network adapters were disabled when trying the steps below
so how i go about doing this and it doesnt work
1 : connect phone and install cert
2 : start WPConnect.exe to establish a connection
3 : Start zune
4 : place unlocker at C:\
5: error messages pops out .
tried on my laptop and desktop all same problem.
PS , ive been doing all this for two days , researching every night till3am while i have school next day. i have no idea what i still need to do.
Try to restart the computer, maybe some IM software took the port 443
Thats what I did
any other help ?... i check for the port too already. i will try it now again
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
TheATHEiST said:
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
Click to expand...
Click to collapse
tried , no avail
lionhart1001987 said:
tried , no avail
Click to expand...
Click to collapse
thats it ? ... no help ?
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
Why are you quoting yourself??
Also people have tried to help you, Yu are obviously doing something wrong or there is something on your pc that is blocking your connection, try and read some guides and disable anything that could potentially be blocking it.
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
OK start up your mobile. Is the date and time correct (Very important) if all ok then start zune. open up the chevron on c/drive and see if it will connect with ot the Ohno message.
You may have to do this a few times. try the other computer as well.
Some guy's can get the chevron to work, by puting the date a few months forward NOT back.
If you do manage to get the chevron unlocked, then dont lock it.
Make sure to swith off spyware detectors, and put your antivirus into stand by mode until you complete this tasks.
and read this thread: http://forum.xda-developers.com/showthread.php?t=912218
Russ
I got a Venue Pro yesterday. I purchased it on eBay. Hooked it up to perform updates and I couldn't. I constantly get error code 80070002
I have tried it now on two PCs on two different networks, one running Win 7 and the other running Win 8. I have looked on the net but can't really find anything helpful.
Anyway, never having had the phone before I found it odd that it came with a call and message history. Even after I reset the phone it still has a history, pictures of people from Facebook with pictures that are obviously professional shots. All messages are from people each other how great their new Windows phone is.
Also, if I don't use the phone for a couple of minutes it starts a phone demo video/slide show. I am now thinking I have a demo OS even though I can make calls and surf the net. Current OS is 7.0.7004.0
What can I do to totally wipe this phone and start from blank?
Thanks
You'll probably have to follow the instructions in "How to unbrick a Dell Venue Pro." No way to change a demo ROM into a retail ROM. You need to flash the retail ROM and start over.
If you still have the original rom installed on it, could you:
run the emapp tool and write down the contents of what it has?
As far as dell is concerned, I dont believe they normally make demo specific roms.
But that is in reference to their android devices and MS might have had them make an exception for the VP (and it's WP7)
TheManii has a thread over here where he's collecting this data.
Dial ##634# to enter the hidden Engineering Mobile menu.
http://forum.xda-developers.com/showthread.php?t=1479233
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Same boat
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi, I just got a phone in the same conditions you have had mention(demo mode), and I thought I have done and taken the same steps to flash my device, but with not avail, the skydrive file has been removed, and I was wondering if you maybe still have them(the files) somewhere and if I could "borrow" them. I mean I think I have the right ROM and the UpgardeWp, but maybe they are the wrong ones, because is NOT working for me.
Thank you very much and I hope you have a fantastic evening.
Israel
*UPDATE* never mind, I was able to do a proper flash, and now I have a good working Windows Phone...
Israel
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi
I am trying to do the same thing. But when I click the sky drive link to download the rom , there is nothing there. It asks me to login to windows live and thats it. Do you still have this rom downloaded and can you email it to me? OR where can I find this rom? Plz help.
In the middle of the "how to unbrick your dell venue pro" the rom is posted, on some russian download site.
http://forum.xda-developers.com/showpost.php?p=22415484&postcount=35
That file is hosted on my skydrive, and it is still available. It may be asking you to log in to your windows live account to access it. Not sure.
I got it ! Thank you so much!!!!!!!!!!!!!!!!!!!!!!!!!!!!
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
i have performed everything that is posted in XDA-developer about this error and when i tried to update/restore/backup from command promt using .cab file i got below error:
Id: \\?\usb#vid_045e&pid_0710#0a1846cd-8203-1781-bc2a-de1974852ebc#
{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: cd46180a - 03828117 - bc2ade19 - 74852ebc
Name: Venue Pro
KITLName: QSD8XXX82BDB791
Manufacturer: DELL
ModelId: 1
Model: Venue Pro
MobileOperator:
Version: 07.00.07004.00-00000
Djha said:
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
Click to expand...
Click to collapse
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.
Nothing worked
Technosquid said:
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.
Click to expand...
Click to collapse
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.
Djha said:
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.
Click to expand...
Click to collapse
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?
Answers:
Technosquid said:
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?
Click to expand...
Click to collapse
1. yes, i tried a soft reset(resetting the phone from settings->about phone->reset phone) even also perform a soft reset without SD card and try to update from zune without SD card but still getting same restoration error.
i already tried all options cab sender, mangoforall 0.2 etc/ update and restore from command promt:
getting below error everytime whenever i tried to perform any thing from command promt(.bat) :
Error: Exception from HRESULT: 0x801812C0
Call stack:
at wm7update.Program.UpdateDevice(IDeviceInfo deviceInfo, List`1 updates, Upd
ateType type)
at wm7update.Program.Main(String[] args)
2. this is not my phone i got it in a non working state showing "SD card not working".. then i performed steps mentioned in "how to unbrick DVP". after that i got a working DVP.
3. It is a T-mobile DVP and sim unlock by unlock code provided by dell.
4. It is on 7004 Tmobile ffu no cab update til now, as i am not able to send any cab via cab sender.
Note: i don't have any previous back-up of this mobile and not sure wheather the SD card is original or not.