Drakosha said:
Hello to all!
I think, I've finally found the reason why Chevron almost never works. After a few days of struggle, I managed to successfully unlock my HD2 three times in a row, all by the same trick.
The idea is to change the IP which Chevron emulates DURING the process of jailbreak. Here's step-by-step.
1 - Disable LAN card in your PC (Control Panel\Network and Internet\Network Connections\ right click on "Local Area Connection" and choose "disable"). It is very important to disable ALL connections, but you MUST remember which one is used for Internet access (see below, why).
2 - Do all the standard steps of unlock - install certificate, start WPConnect e.t.s. When Chevron fails to unlock - LEAVE IT OPEN.
3. Start Notepad and open hosts. Delete lines added by Chevron (at the bottom). Save. LEAVE NOTEPAD OPEN.
4. Press Win+R and enter IPConfig /flushdns , press "enter". CMD window will blink for a second - that's normal.
5. Press Win+R again (there will be IPConfig /flushdns typed already), but DO NOT PRESS "ENTER", just leave this window open.
6. Now the trick. Start WPConnect. WHILE it connects, continue to repeatedly press "Unlock" button in Chevron, until the black CMD window of WPconnect disappears. Chevron will fail to do its job, but that's in fact is the very thing we need.
7. Now, do not touch Chevron window, just return to Network Connections and ENABLE yor LAN card.
8. Go to Notepad and JUST CLICK "Save", do not alter anything inside.
9. Return to the window with the typed command IPConfig /flushdns . Press Enter.
10. Start WPConnect, WAIT until it disappears, and press "Unlock" button in Chevron. You're done - this time unlock would work.
At least, it worked for me 3 times in a row, while NO other ways worked.
Best regards - Draco.
P.S. If you have firewall - disable it before doing anything.
P.P.S. Win7 from NAND + MDJ Desire HD 4.4 from SD = best phone in the world
Click to expand...
Click to collapse
I have followed other guides posted here before, but none is as reliable as this one. Flawless. (Note that Zune is not required at all during this process, WPConnect is used)
Extra precautions :
1) Make sure port 443 is not used. You can open command prompt and type netstat -aon. From there, check which ip ends with 443 and check its PID number.
Once you have acquired the PID, go to command prompt and type tskill <PID number>.
2) Close skype.
3) Turn off your antivirus / firewall.
4) Make sure that during executing WPconnect.exe you're phone should NOT in be in sleep-mode/locked.
5) Make sure your host file located in C:\Windows\system32\drivers\etc\ is not read-only.
Credits to member Drakosha.
Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.
dissa said:
Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.
Click to expand...
Click to collapse
WPconnect is an executable used to connect your PC to wp7 devices without having to open ZUNE.
You can find out more about it here http://forum.xda-developers.com/showthread.php?p=10609273#post10609273
I test all solution, why not these one? I will reflash WP7 and test
Thanks for the TIP !
Ok.. now I know.. but the major problem is that I have Windows Xp.. so no chance to try tha trick... :-(
As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!
birel3107 said:
As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!
Click to expand...
Click to collapse
Can you read what is says in the window before it closes? Usually WPconnect just opens for 2-3 seconds and after a connection is established it will close back. If it says "Connection is established" or something like that, means you're good to go.
Read the steps carefully.
Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!
or this one!
yeah, that's just the same as I get when running WPConnect.
Yes but does it solve your problem?
I post 2 screenshot;
-Compltly close Zune
-Connect the device
Here's what i did, connect the phone to PC via USB, let zune opens and sync. Then close zune. Rune WPconnect.exe. It should say "Trying to establish a connection with blablabal" then "Connection established" and it will close. Try that.
G-ThGraf said:
Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!
Click to expand...
Click to collapse
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.
Niglet said:
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.
Click to expand...
Click to collapse
No it was for help birel !
Sent from my HTC HD2 using XDA App
I made it 3 times and it works !
BIG BIG Thanks!
G-ThGraf said:
I made it 3 times and it works !
BIG BIG Thanks!
Click to expand...
Click to collapse
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).
I'm from Russia. sorry for my english. stll, not working for me, i'v done all steps, but can't unlock my hd2.
birel3107 said:
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).
Click to expand...
Click to collapse
Hum, only (no lock--> set to never..)
I did, step by step what |OP| Posted !
I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.
Improve said:
I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.
Click to expand...
Click to collapse
This is the one that i use on Windows Seven 64 bits Ultimate
Related
Ok..so first of all thanks for clicking on my thread.I hope somebody can help me flash a rom.I can't post the link because I'm new....I added a text file with the link(yes, it's on xda)
Post #9 describes a process of flashing this rom.
My device: HW6915 vG.39 G4(flash chip)
I am having trouble with this step pdocwrite spl -n0 -b 0x20000 0 0x80000.
Yes I know what the bootloader is and I know how to get into it.So after I connect the device via usb(while in BL mode) i run the command mentioned above.The problem is that nothing happens(screenshot included),it just stays at the same command and does not progress at all.CPU usage is little to none.And if I do try to flash the rom anyway the progress bar on sable_RUU gets stuck at 1% and after a few minutes gives an error.I tried this on XP 32 and on 7 64.
Yes, this is my first post, so take it easy.
Thanks for any help.
hello. i have the same problem but my sable ruu progress bar freezes at 51% and then pop up error:201. help?
For you it's stuck at 51% because you also flashed the bootloader(CEBL.nbf).I chose not to as it's optional.Even so I'm still stuck on the original problem.
Anybody know the answer to this?
my problem is identical. i am also having trouble with pdocwrite spl -n0 -b 0x20000 0 0x80000.after i run the command nothing happens,it just stays at the same command and does not progress at all as in your case. then when i run sable_ruu it freezes at 51%
did you try...
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Spiaatie said:
You need to write SPL when phone is on and connected with ActiveSync, not in bootloader.
Click to expand...
Click to collapse
Ok it works thanks guys for all the help.
Will report back to your thread and tell you about my findings
Thanks,appreciate it
Thanks from me too. On the first look wm 6.1 runs faster than 5.0 and gps does not work (igo 2006 plus-can not find gps com port).
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
jambongo said:
my suspicions on gps is it might be driver related in asset viewer (Settings/System/MyCPL 7) under GPS it used to state whether it was on or off in WM5 but now it says N/A
Click to expand...
Click to collapse
Yes the driver is indeed missing as this is ported from a hp without gps(i guess so anyway).First clue is that it doesn't include any base navigational software.
Second igo 8 reports ''gps driver not found''
n can you! help???
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
oussahoo said:
you seem to know how to proceed to tryin' roms on you hw6915;
......i don't!
can u help me, i'm really a newbie on this!!!
i wish there was an "upgrade your ipaq verson for dummies" or somthing!!
i got the hp ipaq hw6915, an usb connector, Internet access!! anything else?
Click to expand...
Click to collapse
Beware dude this is higly experimental.There is no GPS for example.The rom is wm6.1.This is just for people who want to test and no it obviously not official.All files can be found at the link in the TEXT file I attached to my first post.
1.Connect your device to activesync(suggest a hard reset first,however it's optional)
2.Extract SPL vG.39.7z anywhere you want.
3.Run ''Command prompt'' (if using vista/7 RUN AS ADMINISTRATOR)
4.Enter this command pdocwrite spl -n0 -b 0x20000 0 0x80000 (WAIT UNTIL IT FINISHES).This command replaces a file in the ROM which allows you to flash ''non-original roms'' basically software CID unlocking which allows flashing of ''cooked roms''
5.You will get warnings on your hp regarding a dll file(itsutils.dll) PRESS YES
6.Put your device in bootloader mode.[hold the two buttons next to the joystick(the round thingy) and shortly tap the reset button with your stylus
7.Open activesync,go to connections and untick allow USB connections
8.Extract 6915_ENG.7z and run Sable_RUU
9.Press on the big ''Upgrade button''
10.There will be a progress bar, when it's done it should say something like '' Update finished !!''
11.Go back to activesync and re-tick allow USB connections
I wrote this for everybody who's got trouble flashing roms on their hw69xx.Yep I had this problem too.
This detailed enough?
jambongo said:
did you try opening the command prompt as administrator?
Code:
1. Click on start
2. Type command
3. Then either right click and then pick run as administrator or just CTRL + SHIFT + Click
If that doesn't work you can try disabling UAC by clicking start, typing UAC pick the first option then dragging the slider to the bottom and restart computer
Click to expand...
Click to collapse
A question ....
but it happens to me the same error in XP and not out of the 1% resulting in the error 201
Can you help me!
hi
I have the hw6915
to me the procedure doesn't go
he/she writes me "client_initialize Fail Error 601"
a question: what I write on the Command Pront
thanks
for further information
the cell doesn't connect him to activesync
it is jammed on screens her/it USB - LOGO HP INVENT and in low vG.39
THANKS
@spiaatie
mine is in bootloader
however it doesn't connect him with Activesync
what do I have to do?
which procedure do I have to do?
thanks
can't program ipaq 6945
When ever I push upgrade button, it just hangs and afer a while I get the message:
client_getosver Fail !! Error :501
I'm using it on windows XP,
could someone help me!!!
Thanks!
rra_pn said:
client_getosver Fail !! Error :501
Click to expand...
Click to collapse
Did you install SPL?
Yes, I did de pdcowrite on command prompt, then it gave me the warning on my ipaq and then it finished.
After that I unticked the allow usb connections on active sync
then I press the two buttons next to the joystick and press the reset
I run sable
and then it does what i Posted
Thanks!
1. Have Winphone developer tools installed. Download it for yourself
2. Connect Phone via USB
3. Wait till zune starts and sync completes
4. Verify that zune is not in a guest relationship
5. open a command prompt, type netstat -a to confirm that port 443 is not being used
6. open an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to windowsphone developer services
7. go to the settings on the phone and turn airplane mode on (so that the phone is forced to use internet via zune)
8. While the phone is still on the settings page, run Chevron with admin privileges
Attention: if port 443 is used (see on your list) stop IIS or exit Skype program
Links dead
DJTJ said:
Links dead
Click to expand...
Click to collapse
Link has an ellipsis in the middle of it.
Regardless, this "fix" did not work for me.
ilijan said:
1. Have Winphone developer tools installed. Download it for yourself
2. Connect Phone via USB
3. Wait till zune starts and sync completes
4. Verify that zune is not in a guest relationship
5. open a command prompt, type netstat -a to confirm that port 443 is not being used
6. open an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to windowsphone developer services
7. go to the settings on the phone and turn airplane mode on (so that the phone is forced to use internet via zune)
8. While the phone is still on the settings page, run Chevron with admin privileges
Attention: if port 443 is used (see on your list) stop IIS or exit Skype program
Click to expand...
Click to collapse
eureka!!! it worked!!!!
Now it just gets the error later
DJTJ said:
Now it just gets the error later
Click to expand...
Click to collapse
I mentioned this in the original thread:
DanielNTX said:
I had the same connection problem as everybody and then out of desperation I set my computer and phone date to the 1/10/11 and tried and it worked!
Click to expand...
Click to collapse
meletios said:
Guys.. finally..atleast I had my phone unlocked by chevron..
change the date to a future date(as a post earlier suggested, thanks ) , for me it was 01/Oct/2011...it worked finally..dont know how everything else pans out....will update..
Click to expand...
Click to collapse
Set the time and date of the phone and computer back to like 1/10/2011 and it should work.
For some reason the spoof'ed developerservices.windowsphone.com address to your local machine rejects the HTTPS 443 request if the date is correct. I think it was a built in kill switch by the original devs of ChevronWP7. Because the program can tell whether if the phone is pin-locked or not and will display a message accordingly meaning it definitely has a connection.
Setting the date back seems to have no effect here. I changed the date of the computer and the phone to the 1st of january 2011. Reconnected the phone, waited until sync to zune finished and retried. Still the same problem.
ilijan said:
1. Have Winphone developer tools installed. Download it for yourself
2. Connect Phone via USB
3. Wait till zune starts and sync completes
4. Verify that zune is not in a guest relationship
5. open a command prompt, type netstat -a to confirm that port 443 is not being used
6. open an admin command prompt, navigate to c:\windows\system32\drivers\etc\ then type notepad hosts and delete any references to windowsphone developer services
7. go to the settings on the phone and turn airplane mode on (so that the phone is forced to use internet via zune)
8. While the phone is still on the settings page, run Chevron with admin privileges
Attention: if port 443 is used (see on your list) stop IIS or exit Skype program
Click to expand...
Click to collapse
Thanks! Was the developer services in the HOSTS file that fixed for me.
it work properly for me ... if you sync with zune its automatickly broke the chevron unlock... just go step by step and you can unlock your phone withou connection issus usb error...GL & HF
what helps is just to sync for example one mp3 with zune before,t hen run chevron
doesn't works for me :s :s
How do you clear port 443? And how do you delete the host file after typing in cmd.exe?
yes....i do it....but...it's the same error...aaarrrhhhhh....
For two days the same error....I can not understand why, and I have done everything ... sure ...
please, help me...
P.S.
My os is a 64 bit, but i tried also a 32 bit so....windows 7 ultimate in both case...
i think its enught try this step:
connect hd2 to pc via usb ,
zune start and sync.
you must have UNLOCKED SCREAN not black screen not lock screan!!
your devie must be on.
navigate to c:\windows\system32\drivers\etc\hosts double click and open with NOTEPAD...
look down and REMOVE!!!!!all this text from the host file:
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
if its removed put X to close the notepad, its open dialog windows and you click to yes save it.
after that go to chewron and run as administrator
and just unlock the device
for me it worked only when I closed all the messenger clients (skype, ym, oovoo, live), not only skype...you can try this too
Very helpful, Im assuming it worked because it gave me the option to "relock" the phone?
Doesn't change anything for me with Xp pro. Always same error but it's certainly normal caus' i'm not able to instal wP7 sdk
Success!
My problem was that I had no internet connection in Zune.
I only use my Android phone to tether to the internet, and this whole time I wasn't tethered online.
It seems Zune MUST have an internet connection, and the phone MUST be in airplane mode for this to work.
ilijan said:
i think its enught try this step:
connect hd2 to pc via usb ,
zune start and sync.
you must have UNLOCKED SCREAN not black screen not lock screan!!
your devie must be on.
navigate to c:\windows\system32\drivers\etc\hosts double click and open with NOTEPAD...
look down and REMOVE!!!!!all this text from the host file:
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
192.168.1.102 developerservices.windowsphone.com
if its removed put X to close the notepad, its open dialog windows and you click to yes save it.
after that go to chewron and run as administrator
and just unlock the device
Click to expand...
Click to collapse
I connect hd2 to pc via usb ,
I zune start and sync.
I have UNLOCKED SCREAN not black screen not lock screan!!
My device is be on.
I navigate to c:\windows\system32\drivers\etc\hosts double click and open with NOTEPAD...
look down and REMOVE!!!!!all this text from the host file:
169.254.194.227 developerservices.windowsphone.com
Close and save...
But still the problem
Me too...same problem...
The error says "make sure it's connected using usb"....
Damn
Ok guys...This is what i did to Unlock succesfully my WP7-HD2 using Chevron..
These are the steps i made and it worked just fine and i deployed my apps succesfully on my device:
0.5)Type regedit in start/Run and find this key...
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone \ProxyPorts]“DeviceReg”=dword:000069C5
I personally deleted this key and remade it... It's a 32 bit Dword value..Right click, New, Dword value... add this in Data Value -> 69C5
and press ok! Rename the file to "DeviceReg" without the quotes.
1) Open Notepad with Administrative rights using right click and open as Administrator. Go to FILE/OPEN and paste this on the search bar
i.For Windows NT and Windows 2000
a.C:\winnt\system32\drivers\etc
AND
ii.Windows XP, Windows Vista or Windows 7
a.C:\Windows\System32\drivers\etc
2)Double click Hosts file...
It should open in Notepad..
3)At the end of the page you will see 192.168.10.1 Windows Phone (or something like that)...Remove this and save the file by pressing FILE/SAVE..
It should be saved just fine..
4)Plug your phone to usb and go to device manager..
Uninstall: Windows Phone usb from there and unplug the phone..
5)Restart the computer.........
6)Make sure you have Windows Updates enabled... When you plug the phone in Windows should say that usb device doesn't work and you need to isntall the drivers... Press Install and wait....
7)Drivers should be installed from Microsoft...Now go to Zune and sync the device...
8)Make sure you isntall the Cetification to your device via email!
Open Chevron, check both boxes and press Unlock...You are done...
9)Open Market place from PC and download something....Check the 3 boxes and Press deploy..It should now say "connecting with phone" and after that "sending file"
ENJOY!!!!!!!!!!!!!!! Results may vary but it worked for me!
Special thanks to member "eried" for his time yesterday!
Can't get past 8.
Chevron can't connect: Oh oh message. Before Chevron did start but could not connect while trying to unlock again.
Even now the phone is off flight mode, zune is telling that the phone has no internet while the phone have internet.
Had everything working but after update to 7004 by zune nothing is working anymore. Tried everything i read and have much experience with modding devices.
As i told the results may very...
I also know about modding devices since my Sony Ericsson W800 and all Sony devices i owned after it and Iphone which i sold before 4 months to get my HD2...
Anw...I had strange problems with Chevron... I unlocked it like 4 times and after that it says can't connect with my device.. Also Market places didn't work in the first place... Now with this guide i made i succesfully unlocked my device and deployed 5 apps already on my phone..
And also try this on your pc:
Type regedit in start/Run and find this key... [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone \ProxyPorts]“DeviceReg”=dword:000069C5
I personally deleted this key and remade it... It's a 32 bit Dword value..Right click, New, Dword value... add this in Data Value -> 69C5
and press ok! Rename the file to "DeviceReg" without the quotes.
When you are done with this try again the guide from the begining!
ok, thanks for your help, had the registerkey already checked, did your workaround again but stuck by 8. Chevron Oops...
Thanks anyway
AS ABOVE
i've followed the steps , dont say im a leecher cause i read through all.
host file checked - no window developer services
regedit.exe - edited the registry
installed zune
installed microsoft sdk
activation code - gotten
network adapters were disabled when trying the steps below
so how i go about doing this and it doesnt work
1 : connect phone and install cert
2 : start WPConnect.exe to establish a connection
3 : Start zune
4 : place unlocker at C:\
5: error messages pops out .
tried on my laptop and desktop all same problem.
PS , ive been doing all this for two days , researching every night till3am while i have school next day. i have no idea what i still need to do.
Try to restart the computer, maybe some IM software took the port 443
Thats what I did
any other help ?... i check for the port too already. i will try it now again
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
TheATHEiST said:
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
Click to expand...
Click to collapse
tried , no avail
lionhart1001987 said:
tried , no avail
Click to expand...
Click to collapse
thats it ? ... no help ?
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
Why are you quoting yourself??
Also people have tried to help you, Yu are obviously doing something wrong or there is something on your pc that is blocking your connection, try and read some guides and disable anything that could potentially be blocking it.
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
OK start up your mobile. Is the date and time correct (Very important) if all ok then start zune. open up the chevron on c/drive and see if it will connect with ot the Ohno message.
You may have to do this a few times. try the other computer as well.
Some guy's can get the chevron to work, by puting the date a few months forward NOT back.
If you do manage to get the chevron unlocked, then dont lock it.
Make sure to swith off spyware detectors, and put your antivirus into stand by mode until you complete this tasks.
and read this thread: http://forum.xda-developers.com/showthread.php?t=912218
Russ
1st qns:
i am having a problem when installing the zune software on my computer..
the first time i install it, it has error opening up, so i uninstall it!
while reinstalling it for the second time or third time, it hangs in the downloading updates 100%... i waited it for 1hr still struck on the downloading updates!
or is there any other way that we can transfer my songs with zune?
appreciate if someone would help out!
2nd qns:
htc hd2 wp7 cannot sell photos via bluetooth???
3rd qns:
is there any way to get those paid apps for free??
4th qns:
with this wp7 on htc hd2, i can't access to my sd card??
5th qns:
when i receive a sms, there is no notifications light blinking or something?
appreciate if u guys can answer my qns.. i am new to this wp7 ROM
1st qns: you'll need zune
2nd qns: there's no bluetooth file exchange
3rd qns: this forum is not the place for that and you should really buy apps
4th qns: WP7 runs from you sd card. you're using it all the time.
thanks surramurra for answering my qns..
but i cannot install zune software... keep getting error or hang in "downloading updating 100%" any idea how to resolve this???
Your running windows? XP or 7
Sent from my HD2 using XDA Windows Phone 7 App
plapyark88 said:
"downloading updating 100%"
Click to expand...
Click to collapse
Most WP7 ROMs have updating bypassed. You cannot install updates.
hakuchi18v said:
Your running windows? XP or 7
Sent from my HD2 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
is window 7 ultimate sp1
i am unable to install the zune software... when i double click the installation file, it start to check for updates > downloading updates ... than struck at 100%..
i have try reinstalling it also no hope...
http://img822.imageshack.us/i/pic1pd.jpg/
http://img191.imageshack.us/i/pic2aga.jpg/
is just hang there forever.. i try waiting for 1hr also no hope.. it just struck there
appreciate if someone should solve this problem of mine!!
plapyark88 said:
is window 7 ultimate sp1
i am unable to install the zune software... when i double click the installation file, it start to check for updates > downloading updates ... than struck at 100%..
i have try reinstalling it also no hope...
http://img822.imageshack.us/i/pic1pd.jpg/
http://img191.imageshack.us/i/pic2aga.jpg/
is just hang there forever.. i try waiting for 1hr also no hope.. it just struck there
appreciate if someone should solve this problem of mine!!
Click to expand...
Click to collapse
Two things to try out...
1. Turn UAC off... It could be that it might be asking for Admin rights but stays stuck for some reason..
or
2. Try the install again but disconnect from the Internet like that it cant check/download for an update
Maybe antivirus software could be doing something wrong... So turn it off and see
what is UAC???
i believe when i uninstall the ZUne software.. there are still some remaining zune things inside... that why i struck in installation part...
i even try to install it in the SAVE MODE... also struck....
hakuchi18v said:
Two things to try out...
1. Turn UAC off... It could be that it might be asking for Admin rights but stays stuck for some reason..
or
2. Try the install again but disconnect from the Internet like that it cant check/download for an update
Maybe antivirus software could be doing something wrong... So turn it off and see
Click to expand...
Click to collapse
i have tried disable UAC, disable antivirus software and disconnect the internet it still wont work!...
plapyark88 said:
i have tried disable UAC, disable antivirus software and disconnect the internet it still wont work!...
Click to expand...
Click to collapse
1. Download the zune package thru Microsoft.com [save it on your desktop] [one from microsoft]
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=ab1a80ed-e337-4346-9d5a-f00cfb467514
2. Open the "Run" program by hitting "Start" typing "RUN" under start search and hit "Enter" key [or just press and hold "Windows key" + "R"]
3. A small window on the lower left of your screen should show up
4. Then, "Drag and Drop" the "ZunePackage47.exe" [file downloaded from mircosoft.com] towards the box on the "Run" program
[simply hold the left click on the "ZunePackage47.exe" then move you mouse towards the "Run" program then release the left click]
"if its successful you should have thepath/location of the file on the 'Run' program"
5. Then on the"Run" program, go to the very last part of the path after".exe" then add" " [space] followed by"/x"
it should show something like: "C:\[path or location of file]\ZunePackage47.exe /x"then click"OK"
6. Just follow the prompt messages and it will extract additional files and folders to you desktop
7. Afterwards go the folder [x86 orx64 (depends on you Operating System Type)] then access folder with a name "packages" and try to run the file "zune-x64" or "zune-x86" and if you recieve any error message just continue installing it. It should still install
credit(http://answers.microsoft.com/en-us/...-updates/558fdccb-e119-4747-ad33-4017bc5c1f32)
i still have trouble installing this zune software >.<!
i guess i just go for an android os...