plz help my phone not booting - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me

Y4HY4 said:
hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me
Click to expand...
Click to collapse
Can you get to download mode?

Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
no i can't my device is stopped working

Pull your battery and leave it out for at least ten minutes and try to get to download mode again.

Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
Tulsadiver said:
Pull your battery and leave it out for at least ten minutes and try to get to download mode again.
Click to expand...
Click to collapse
the result is same . it's not working !

Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0

Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Try pulling the battery and plug it into your computer with the OEM data cable. Wait for 10 minutes and try to start the phone without the battery. If it works, it's a damaged or low battery.
If it doesn't, see if it will hook up to Kies 3 to repair.
Last resort is call the manufacturer to see if they can help.

Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
i will try this. will it work ?

It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?

Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
Tulsadiver said:
It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?
Click to expand...
Click to collapse
it doesn't working sorry

It probably won't work but you don't have anything to lose trying.

Tulsadiver said:
It probably won't work but you don't have anything to lose trying.
Click to expand...
Click to collapse
will usb jig work on my phone?

Be worth a try.

Tulsadiver said:
Be worth a try.
Click to expand...
Click to collapse
ok . Thnx for u r support . i will try jig tomorrow

hi i tried to usb jig and it doesn't work plz help my phone is hard bricked

Y4HY4 said:
hi i tried to usb jig and it doesn't work plz help my phone is hard bricked
Click to expand...
Click to collapse
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.

Tulsadiver said:
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.
Click to expand...
Click to collapse
I left my phone to service. he will do JTAG repair on my phone if i am lucky

Related

[HELP]My phone is bricked... Am I screwed ?

I've made a HUGE mistake... I wanted to flash Abysskernel over RocketRom V4 to make a full wipe. But I've done it to fast, without looking good at what I was doing.
I've flashed CYANOGENMOD 9... And flashing has stuck. Now, I can't start my phone. No more recovery, no more download mode !!!
I think I'm screwed.
Is there a little chance to repear it without SAV ?
Thank you.
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Try usb jig
Sent from my GT-N7000 using xda premium
musashiro said:
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Click to expand...
Click to collapse
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
zepretender said:
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
Click to expand...
Click to collapse
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
gee2012 said:
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
Click to expand...
Click to collapse
No download mode... Nothing. Full black screen.
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
bhasg1007 said:
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
Click to expand...
Click to collapse
What is "16gb pit file" ??
if its totally black and you cant turn it on, you are lucky if you still have the warranty.. they cant check the flash counter...
just tell them you suddenly cant open the phone
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
alexdumitru said:
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
Click to expand...
Click to collapse
I can't reach Download Mode :'(
Totally black screen.
I hope that musashiro is right.
hi
i have got the same problem.
alexdumitru your problem is not same. the link you shared they mention to solve softbrick devices. but me and zepretender got a hardbrick devices. it means you can not go to download mode. so i think only they solve it with changing mainboard or damaged parts.
is there any other new ways for solve hard brick devices??
That's a hard brick too. The emmc is damaged, though it enters download mode, it's true. But I've seen cases where the device entered download mode, though the screen remained blank. So try to enter download mode, even if the screen is still blank and then connect it to the computer. If Odin recognizes it, you might be lucky.
i´ve sufferd the same problem. i´ve bricked my note - no recovery, no download mode. i tried to go to download mode, but odin didn´t recognized usb connection. My phone was dead. I´ve sent my device to samsung for warranty repair.
Hmm I didn't know that.actually I hv tried everythng but odin didn't recgnse it. I will try your suggest ofcourse.its worth to try. So whle usb cble connected should I try to go to download mode? In some topics they mentioning about use another usb cable.which is dfferent than normal ones. Do u know anythng about it?
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
quarkw said:
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
Click to expand...
Click to collapse
If your phone is "superbricked" hard brick, then a JIG won't work because it damages the eMMc chip. But, you can make your own JIG. You can get stuff at your local electronics store, like Radioshack. I don't know where you live though, haha!
Even if the JIG gets you in download mode though, if Odin fails at factoryfs.img or NAND write start then it will still be bricked.

[q] got stuck on fasteboot mode, help!

i dont know what to do
i just flashed this rome into my G2:
http://forum.xda-developers.com/lg-g2/development/rom-cloudyg2-t3006744
the problem is that my phone is D802 so i flashed the wrong rome :crying::crying::crying:
now my phone stuck on FASTEBOOT MODE
i cant get into recovery mode or download mode, i just dont know what to do!
Now i stuck on security error and the device on loop
Also, the pc isnt reconizing the phone
halotzi said:
i dont know what to do
i just flashed this rome into my G2:
http://forum.xda-developers.com/lg-g2/development/rom-cloudyg2-t3006744
the problem is that my phone is D802 so i flashed the wrong rome :crying::crying::crying:
now my phone stuck on FASTEBOOT MODE
i cant get into recovery mode or download mode, i just dont know what to do!
I'm desperate, i want to cry becouse i just fixed it!
What can I do?? pleaseeee help me!!:crying:
Click to expand...
Click to collapse
Calm down son, just follow this guide by bender http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
Fastboots not that bad of a place to be
Art Vanderlay said:
Calm down son, just follow this guide by bender http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
Fastboots not that bad of a place to be
Click to expand...
Click to collapse
I dont really understand what needs to be done
I dont know what is my imei, iis a really big problem
I just need to run RUN_THIS.bat?
halotzi said:
I dont really understand what needs to be done
I dont know what is my imei, iis a really big problem
I just need to run RUN_THIS.bat?
Click to expand...
Click to collapse
Show me your software information, I'll dump the partitions and link them to you.
Then you put them in the folder with all the adb stuff.
Then you connect your phone and run the batch file
Art Vanderlay said:
Show me your software information, I'll dump the partitions and link them to you.
Then you put them in the folder with all the adb stuff.
Then you connect your phone and run the batch file
Click to expand...
Click to collapse
I have LG G2 32GB D802
It's enough or you need more information?
halotzi said:
I have LG G2 32GB D802
It's enough or you need more information?
Click to expand...
Click to collapse
That's fine. I'll have them ready for you tomorrow. Its 12 am here already
Art Vanderlay said:
That's fine. I'll have them ready for you tomorrow. Its 12 am here already
Click to expand...
Click to collapse
OK! Thank you very much! But please dont forget
IMPORTANT:
The computer does not reconize myG2 even there is a sound from the computer when i connect him
this is writing on my device when i connect:
-reset-
-portchange-
-reset-
-portchange-
stall get_descriptor 128 6 1536 0 10
fasteboot: proocessing commands
Click to expand...
Click to collapse
halotzi said:
OK! Thank you very much! But please dont forget
IMPORTANT:
The computer does not reconize myG2 even there is a sound from the computer when i connect him
this is writing on my device when i connect:
Click to expand...
Click to collapse
Try installing pdanet if your phone isn't recognised. It'll install the adb drivers for you.
Here are the 3 files. Just put them in the put_files_here folder and run the batch file. After it's all done you can boot into download mode and flash back to stock
https://www.dropbox.com/s/9p2gu9643ll6del/aboot_229376.bin?dl=0
https://www.dropbox.com/s/3cse678pqjbfww6/boot_262144.bin?dl=0
https://www.dropbox.com/s/zzbrhzzznzcpkm4/laf_589824.bin?dl=0
Art Vanderlay said:
Try installing ]
Click to expand...
Click to collapse
I need to connect the phone into the computer before i install pdanet? Or install pdanet and then connect the phone?
Becouse i connected the phone into the computer and then I started the install but it is on "Updating PdaNet on your phone" for 10 minutes
So i instelled the files and its write "scourty error", what to do??? (ןi cant get into download mode and recovery)
halotzi said:
I need to connect the phone into the computer before i install pdanet? Or install pdanet and then connect the phone?
Becouse i connected the phone into the computer and then I started the install but it is on "Updating PdaNet on your phone" for 10 minutes
So i instelled the files and its write "scourty error", what to do??? (ןi cant get into download mode and recovery)
Click to expand...
Click to collapse
Make sure your phones fully powered off. Hold the power button for about 10 seconds. And then try putting it in download mode
Art Vanderlay said:
Make sure your phones fully powered off. Hold the power button for about 10 seconds. And then try putting it in download mode
Click to expand...
Click to collapse
I tried it, i cant reach safe or recovery mode...
Sorry for the late replay, I sent the phone to a store to fix it but they just broke the screen (and fixed it)
So... what can I do?
UP
UP
UPPPPP
Art Vanderlay said:
Make sure your phones fully powered off. Hold the power button for about 10 seconds. And then try putting it in download mode
Click to expand...
Click to collapse
i cant get into download mode or recovery, nothing
The PC isnt reconizing the phone at all
halotzi said:
i cant get into download mode or recovery, nothing
The PC isnt reconizing the phone at all
Click to expand...
Click to collapse
Send me your teamviewer password. I'll have to have a look at this.
Also, download a kdz and follow this guide up to step 6. Make sure you have these ready
Art Vanderlay said:
Send me your teamviewer password. I'll have to have a look at this.
Also, download a kdz and follow this guide up to step 6. Make sure you have these ready
Click to expand...
Click to collapse
Where is the guide?
I live in israel so we have diffrent hours but i will stay up for every hour you would say
Do you have skype or facebook that we would chat there?
halotzi said:
Where is the guide?
I live in israel so we have diffrent hours but i will stay up for every hour you would say
Do you have skype or facebook that we would chat there?
Click to expand...
Click to collapse
Sorry its over here http://forum.xda-developers.com/showthread.php?t=2666967
Download your kdz from here. http://lg-phone-firmware.com/mobile/index.php?id_mod=36We just want the about, boot and laf out of them. It might take some time to download, just let me know when you finish
Art Vanderlay said:
Sorry its over here http://forum.xda-developers.com/showthread.php?t=2666967
Download your kdz from here. http://lg-phone-firmware.com/mobile/index.php?id_mod=36We just want the about, boot and laf out of them. It might take some time to download, just let me know when you finish
Click to expand...
Click to collapse
I finished the guide and i did everything up to step 6
halotzi said:
I finished the guide and i did everything up to step 6
Click to expand...
Click to collapse
Great. Rename the aboot, boot and laf to aboot.img, laf.img, and boot.img. Now download VMware and slax.
Were going to follow this guide. I have to go to bed now, just familiarise yourself with the guide and send us a pm in the morning

Hard break a300fu

no startup no download mode and no recovery. Can someone please upload the debrick.img.
Thanks
Try charging it and see if it boots at the least(shows Samsung logo/a3 logo) if it doesn't do that at the least then it my be a hard brick that can't be fixed.
I may be wrong but, hard-bricks are not recoverable through any kind of flashing we're used to.
bader400h said:
no startup no download mode and no recovery. Can someone please upload the debrick.img.
Thanks
Click to expand...
Click to collapse
How did that happen?
bader400h said:
no startup no download mode and no recovery. Can someone please upload the debrick.img.
Thanks
Click to expand...
Click to collapse
Oh MAN! try this :::: Charge ur phone and see if there is any change if no thn connect it to pc or laptop and try booting it into download mode, Power + home + vol' down key!! if u hear sound (device connecting sound) then there is chance of recovery
If the device doesn't do anything I described in my first post, its dead and done. You'll need to buy a new phone

S3 Neo doesn't start and doesn't respond to charge.

Hello!
I left connected phone for night with opened application. In the morning my phone doesn't start and doesn't respond to charge.
I can't enter into Recovery or Download Mode. I tried to remove the battery and insert it again but it didn't work.
Sorry for my bad English.
Regards!
Kanzee said:
Hello!
I left connected phone for night with opened application. In the morning my phone doesn't start and doesn't respond to charge.
Sorry for my bad English.
Regards!
Click to expand...
Click to collapse
What is the update now? Is your phone working or not?
Arsal7R said:
What is the update now? Is your phone working or not?
Click to expand...
Click to collapse
No, my phone doesn't work. I'm gonna connect him to charge and just wait. Maybe it gonna work.
Do you have any suggestions on what else can I do?
Kanzee said:
No, my phone doesn't work. I'm gonna connect him to charge and just wait. Maybe it gonna work.
Do you have any suggestions on what else can I do?
Click to expand...
Click to collapse
Connect it to a computer while you have odin running on that computer if your mobile is not dead it will show connected to pc on odin.
If there's nothing showing then it's bricked. But don't let it go. You can revive it.
Search this forum or Google it "how to unbrick Galaxy S3 Neo" " or whatever your model is"
Arsal7R said:
Connect it to a computer while you have odin running on that computer if your mobile is not dead it will show connected to pc on odin.
If there's nothing showing then it's bricked. But don't let it go. You can revive it.
Search this forum or Google it "how to unbrick Galaxy S3 Neo" " or whatever your model is"
Click to expand...
Click to collapse
I check it out and let you know.
@edit
My phone is bricked. Thank you anyway.
Oops i forgot one thing, connect it to a pc and press mobile's power button + Volume Down button.
Arsal7R said:
Oops i forgot one thing, connect it to a pc and press mobile's power button + Volume Down button.
Click to expand...
Click to collapse
Nothing happens.
Btw. I am gonna try this solution http://forum.xda-developers.com/galaxy-s3-neo/help/how-to-unbrick-t2911301
Kanzee said:
Nothing happens.
Btw. I am gonna try this solution http://forum.xda-developers.com/galaxy-s3-neo/help/how-to-unbrick-t2911301
Click to expand...
Click to collapse
Yes this is the last solution for you now. Try it but read those instructions carefully. Do not use any other MMC less than class 10.
Good luck.
Arsal7R said:
Yes this is the last solution for you now. Try it but read those instructions carefully. Do not use any other MMC less than class 10.
Good luck.
Click to expand...
Click to collapse
Thanks but how can I insert SD Card to my PC?
Kanzee said:
Thanks but how can I insert SD Card to my PC?
Click to expand...
Click to collapse
Through a card reader bro. Please read those instructions very very carefully and follow those steps. I hope this will work and your lovely s3 give you a happy smile.
Arsal7R said:
Through a card reader bro. Please read those instructions very very carefully and follow those steps. I hope this will work and your lovely s3 give you a happy smile.
Click to expand...
Click to collapse
Thank you again. And I hope it will work.
I let you know.
Kanzee said:
Thank you again. And I hope it will work.
I let you know.
Click to expand...
Click to collapse
You are welcome.
Arsal7R said:
You are welcome.
Click to expand...
Click to collapse
After I insert the SD Card into my phone I am trying to open Download Mode but nothing happens.
Kanzee said:
After I insert the SD Card into my phone I am trying to open Download Mode but nothing happens.
Click to expand...
Click to collapse
Try again. If fails, try another MMC with different capacity.

Maybe save the hardbrick

Hi.
My phone is bricked now.The phone can load 9008 mode.So I can use the qfil tool to unbrick it.But I need some files to rescue it. The file name like xxxx.mbn xxx.elf and rawprogram-flash0.xml.If you can provide
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
rukesh18 said:
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
Click to expand...
Click to collapse
you are right.
jackzhu said:
you are right.
Click to expand...
Click to collapse
So how'd you brick your phone?
jhill110 said:
So how'd you brick your phone?
Click to expand...
Click to collapse
I changed the blot to a by ADB command:laugh:
I also need QFIL image ...
me too.........
I can create an image but i'm having problems getting phone recognized by QFIL.
ZiemowitP said:
I can create one but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
trantium said:
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
Click to expand...
Click to collapse
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
ZiemowitP said:
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
Click to expand...
Click to collapse
Nope. When your turn it on, the backlight is dim so you can barely see the boot screen. Still no way to get it recognized on my pc
Any one have any luck with this?
Edl cable to enter in 9008 mode.
edl mode essential ph1
https://youtu.be/FSlqiVcIw34
ZiemowitP said:
I can create an image but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
help !can you give the image to me ?my PHONE has been dead to 9008
jackzhu said:
I changed the blot to a by ADB command:laugh:
Click to expand...
Click to collapse
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
stupidis said:
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
Click to expand...
Click to collapse
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Tech_Savvy said:
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Click to expand...
Click to collapse
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
In the dev section there's a thread
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
It refers to Back To Stock and the thread is [STOCK][DUMPS][FIRMWARE] Essential stock firmware and rom dumps*.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini

Categories

Resources