Hard break a300fu - Galaxy A3, A5, A7, A8, A9 Q&A, Help & Troubleshoot

no startup no download mode and no recovery. Can someone please upload the debrick.img.
Thanks

Try charging it and see if it boots at the least(shows Samsung logo/a3 logo) if it doesn't do that at the least then it my be a hard brick that can't be fixed.

I may be wrong but, hard-bricks are not recoverable through any kind of flashing we're used to.

bader400h said:
no startup no download mode and no recovery. Can someone please upload the debrick.img.
Thanks
Click to expand...
Click to collapse
How did that happen?

bader400h said:
no startup no download mode and no recovery. Can someone please upload the debrick.img.
Thanks
Click to expand...
Click to collapse
Oh MAN! try this :::: Charge ur phone and see if there is any change if no thn connect it to pc or laptop and try booting it into download mode, Power + home + vol' down key!! if u hear sound (device connecting sound) then there is chance of recovery

If the device doesn't do anything I described in my first post, its dead and done. You'll need to buy a new phone

Related

[Q] LG G2 won't enter in download mode

Hello, I am trying to get back to stock but for some reason my phone won't boot in download more anymore. It stucks at this step -> see attached photo
Are you connected to a computer or charging we with the cable? Just to cross off one thing.
Sent from my LG-D802 using Tapatalk
waz675 said:
Are you connected to a computer or charging we with the cable? Just to cross off one thing.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
We are in the same situation... if someone can help us
http://forum.xda-developers.com/show....php?t=2710034
http://forum.xda-developers.com/showthread.php?t=2706225
Thanks
No, the phone was connected to the computer
S0wL said:
No, the phone was connected to the computer
Click to expand...
Click to collapse
if you can go to recovery (custom or stock)
it can help you
Code:
http://forum.xda-developers.com/showthread.php?t=2694530
S0wL said:
No, the phone was connected to the computer
Click to expand...
Click to collapse
Did you install any recovery module like CWM or TWRP on the mobile. I faced the same situation and I was able to recover my phone using TWRD and ADB consoles. I will be able to help you if you have installed any one of these.
Thanks.
ravi.ameer said:
Did you install any recovery module like CWM or TWRP on the mobile. I faced the same situation and I was able to recover my phone using TWRD and ADB consoles. I will be able to help you if you have installed any one of these.
Thanks.
Click to expand...
Click to collapse
I'm in the same situation with TWRP :good:
profesy said:
I'm in the same situation with TWRP :good:
Click to expand...
Click to collapse
Only one question,
Do you have any ROM installed currently or stuck without any rom. Like boot loop and secure boot issue etc.
If you have TWRP at least installed on your device, you may use "adb push xxxx.zip /sdcard/xxxx.zip" command if the device is discoverable in "adb discover" command. You may follow the guide here "http://www.droidviews.com/android-4-4-2-kitkat-rom-on-lg-g2-d802-install-twrp/"
If you are able to boot in X rom you may use this guide to shine yourself in stock rom
"http://forum.xda-developers.com/showthread.php?t=2432476&highlight=remove+root+status"
Thanks!
ravi.ameer said:
Only one question,
Do you have any ROM installed currently or stuck without any rom. Like boot loop and secure boot issue etc.
If you have TWRP at least installed on your device, you may use "adb push xxxx.zip /sdcard/xxxx.zip" command if the device is discoverable in "adb discover" command. You may follow the guide here "http://www.droidviews.com/android-4-4-2-kitkat-rom-on-lg-g2-d802-install-twrp/"
If you are able to boot in X rom you may use this guide to shine yourself in stock rom
"http://forum.xda-developers.com/showthread.php?t=2432476&highlight=remove+root+status"
Thanks!
Click to expand...
Click to collapse
I have recovery and a booting rom, the smartphone it's all ok but don't go in download mode (see image above), and i can't see it with the pc in usb, i can't use this guide because i can't enter in the dowload mode and the pc both donwload mode and normal boot don't see the smartphone
S0wL said:
Hello, I am trying to get back to stock but for some reason my phone won't boot in download more anymore. It stucks at this step -> see attached photo
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?p=51693321#post51693321
I got the same problem and got the download mode after that. Good luck !
profesy said:
I have recovery and a booting rom, the smartphone it's all ok but don't go in download mode (see image above), and i can't see it with the pc in usb, i can't use this guide because i can't enter in the dowload mode and the pc both donwload mode and normal boot don't see the smartphone
Click to expand...
Click to collapse
Firstly you may not go do download mode for flashing factory rom. You can do the same even from recovery. However, the guide in http://forum.xda-developers.com/showthread.php?p=51693321#post51693321 seems working for many. You may give that a try.
Thanks.
Sangoku91 said:
Try this http://forum.xda-developers.com/showthread.php?p=51693321#post51693321
I got the same problem and got the download mode after that. Good luck !
Click to expand...
Click to collapse
Thx to all man, this fix the problem. Many many thx to all
Worked ! Thanks, finally got to stock android.
Hi.I can not go to downloading mod on my lg g2.I tried using v+ and connecting to pc.It goes to charging mod and nothing happen.
As you said I went to recovery mod but there is not any advance selection.
plz help me
did donwload mode work ?
zaker.khafan1 said:
Hi.I can not go to downloading mod on my lg g2.I tried using v+ and connecting to pc.It goes to charging mod and nothing happen.
As you said I went to recovery mod but there is not any advance selection.
plz help me
Click to expand...
Click to collapse
Did u get it work?
I have a similar problem, my sprint G2 says download mode when vol up+ cable, but doesn't go all the way into download mode just the initial screen. And normal boot results in being stuck on LG logo forever.

plz help my phone not booting

hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me
Y4HY4 said:
hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me
Click to expand...
Click to collapse
Can you get to download mode?
Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
no i can't my device is stopped working
Pull your battery and leave it out for at least ten minutes and try to get to download mode again.
Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
Tulsadiver said:
Pull your battery and leave it out for at least ten minutes and try to get to download mode again.
Click to expand...
Click to collapse
the result is same . it's not working !
Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Try pulling the battery and plug it into your computer with the OEM data cable. Wait for 10 minutes and try to start the phone without the battery. If it works, it's a damaged or low battery.
If it doesn't, see if it will hook up to Kies 3 to repair.
Last resort is call the manufacturer to see if they can help.
Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
i will try this. will it work ?
It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?
Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
Tulsadiver said:
It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?
Click to expand...
Click to collapse
it doesn't working sorry
It probably won't work but you don't have anything to lose trying.
Tulsadiver said:
It probably won't work but you don't have anything to lose trying.
Click to expand...
Click to collapse
will usb jig work on my phone?
Be worth a try.
Tulsadiver said:
Be worth a try.
Click to expand...
Click to collapse
ok . Thnx for u r support . i will try jig tomorrow
hi i tried to usb jig and it doesn't work plz help my phone is hard bricked
Y4HY4 said:
hi i tried to usb jig and it doesn't work plz help my phone is hard bricked
Click to expand...
Click to collapse
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.
Tulsadiver said:
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.
Click to expand...
Click to collapse
I left my phone to service. he will do JTAG repair on my phone if i am lucky

[SOLVED] Galaxy J5 not booting and also can't boot into Download or Recovery mode

So, after I've updated my J500h to the newest firmware, my phone is stuck at the Samsung logo and the screen is also slowly turning green. So the problem is that I CAN'T boot into recovery or download mode. Odin recognizes the devices when it's hanging at the boot screen. ADB also recognizes the device after a few minutes:
Code:
E:/platform_tools>adb devices
List of devices attached:
18019a5b unauthorized
So, the problem is that I can't boot into download mode... Otherwise I would already flashed the stock firmware.
When connected to USB, the phone sometimes vibrates.
Can someone please help me? I've tried everything, but nothing helped
Does someone have any idea's to solve this problem? Looks like it's bricked.
gg. you just messed up the bootloader...
only way is jtag, nothing else...
H3XabyT3LV said:
gg. you just messed up the bootloader...
only way is jtag, nothing else...
Click to expand...
Click to collapse
Thanks for the answer. I will try jtag to restore the bootloader.
Fixed.
How
TheModzOn said:
Fixed.
Click to expand...
Click to collapse
tell us how?
First tried JTAG, didn't worked.
Searched on Google for a debrick.img file, found it, "flashed" it on my micro sdcard, booted from the sdcard and from that into Download Mode and flashed the stock Firmware
TheModzOn said:
First tried JTAG, didn't worked.
Searched on Google for a debrick.img file, found it, "flashed" it on my micro sdcard, booted from the sdcard and from that into Download Mode and flashed the stock Firmware
Click to expand...
Click to collapse
Please share it with me .. Please
Come on just share it already!
SPYMAN2000 said:
Come on just share it already!
Click to expand...
Click to collapse
frfwr963 said:
Please share it with me .. Please
Click to expand...
Click to collapse
Here it is (J500h 6.0.1 marshmallow): https://drive.google.com/file/d/0B-R9lQbH9_gCUFBKMWNoUmJyeUE/view?usp=sharing

[HELP] LG Spirit H440N cannot access to Download mode

Hi everyone, i have a big problem. Today i was trying to help a firend of mine by unlocking his bootloader on this phone but i got a strange message when i was trying to boot in Download mode. The message was:
"fastboot init( )
loading keystore failed status 5 usb init ept @ 0x8f20700
udc_start( )
fastboot: processing commands"
Basically it doesn't allowed me to enter in Download mode, so no reverting to v10f software, no pushing aboot, no twrp and no Marshmallow zip. Nothing at all, i could do nothing. In the following lines i will tell you what i did and tried:
1) Using different PC usb ports, no way to make it work
2) Using different cables, no way to make it work
3) Trying to boot in Download mode by removing battery and try without it, desperate, obviously no way to make it work
I spent two hours trying to find a way to make it work but i failed miserably...so i'm here hoping someone better than me can help me.
NOTES:
The phone was on original Lollipop firmware v10e (Italy) but rooted.
Basically i did nothing, just tried to put it in download mode (Vol - and plug usb in), tried also other ways but nothing showed up
When the phone is connected to pc (when it's on) it charges only, don't show the option to use mtp so... i think adb won't work
Hope it can help and hope you can help! XD
I had same error, cause of flashing the wron zip basically i needed to get into repair mode and use adb while its trying to repair use adb commands to reboot to recovery
Sent from my LG-H440 using Tapatalk
MadjijaHacker said:
I had same error, cause of flashing the wron zip basically i needed to get into repair mode and use adb while its trying to repair use adb commands to reboot to recovery
Sent from my LG-H440 using Tapatalk
Click to expand...
Click to collapse
But i need Download mode, not recovery. With adb i can access it?
P.S i didn't flash anything
Well, that's what helped me, i don't know was that helpful, you can still try repair mode
Giuskiller said:
But i need Download mode, not recovery. With adb i can access it?
P.S i didn't flash anything
Click to expand...
Click to collapse
Sent from my LG-H440 using Tapatalk
Giuskiller said:
Hi everyone, i have a big problem. Today i was trying to help a firend of mine by unlocking his bootloader on this phone but i got a strange message when i was trying to boot in Download mode. The message was:
"fastboot init( )
loading keystore failed status 5 usb init ept @ 0x8f20700
udc_start( )
fastboot: processing commands"
...
NOTES:
The phone was on original Lollipop firmware v10e (Italy) but rooted.
Basically i did nothing, just tried to put it in download mode (Vol - and plug usb in), tried also other ways but nothing showed up
...
Hope it can help and hope you can help! XD
Click to expand...
Click to collapse
Upload mode is phone off, press VOL+ and then plug the USB.
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
MadjijaHacker said:
I had same error, cause of flashing the wron zip basically i needed to get into repair mode and use adb while its trying to repair use adb commands to reboot to recovery
Sent from my LG-H440 using Tapatalk
Click to expand...
Click to collapse
Can you give more details? How can I access that repair mode and how to use adb commands on it? I have a bricked board that I want to put back on use.
jorlando said:
Upload mode is phone off, press VOL+ and then plug the USB
Click to expand...
Click to collapse
Hi, i tried vol + but the phone just boots... i will try again and let you know in the evening
When device is off hold Vol- and power key until LG logo appear, then release the keys and hold them again, its really hard to time it correctly, but if you do you will get a factory reset option, on that screen you navigate using Vol+ and - buttons and power button is ok
Sent from my LG-H440 using Tapatalk
MadjijaHacker said:
When device is off hold Vol- and power key until LG logo appear, then release the keys and hold them again, its really hard to time it correctly, but if you do you will get a factory reset option, on that screen you navigate using Vol+ and - buttons and power button is ok
Sent from my LG-H440 using Tapatalk
Click to expand...
Click to collapse
Thank you, after the factory reset the combination Vol+ and USB worked (after a few try) and i was able to boot in Download mode, then i flashev v10f, rooted and pushed modified aboot, flashed twrp 1.1.0 with flashify (twrp official app failed many times) and finally installed v20b and supersu. Everything works as expected =)
Giuskiller said:
Thank you, after the factory reset the combination Vol+ and USB worked (after a few try) and i was able to boot in Download mode, then i flashev v10f, rooted and pushed modified aboot, flashed twrp 1.1.0 with flashify (twrp official app failed many times) and finally installed v20b and supersu. Everything works as expected =)
Click to expand...
Click to collapse
I am glad i could help [emoji2]
Sent from my LG-H440 using Tapatalk
oh man same problem if u fix this let me now how plzzzzzzz
Silentsx1 said:
oh man same problem if u fix this let me now how plzzzzzzz
Click to expand...
Click to collapse
Is there anything you can do on your phone or is it completely dead ?
I can enter the hardrester but itis not helping and in fastboot itis saying FAILED (remote: unknown command)
Silentsx1 said:
I can enter the hardrester but itis not helping and in fastboot itis saying FAILED (remote: unknown command)
Click to expand...
Click to collapse
Try to boot into download mode, if you can. Turn off your device then press and hold vol. Up and plug in the cable.
i cant turn off my device legit after i put battery fastboot show up :crying::crying::crying::crying:
Silentsx1 said:
i cant turn off my device legit after i put battery fastboot show up :crying::crying::crying::crying:
Click to expand...
Click to collapse
Can you post a screenshot here ?
here i cant do anything plz help
https://ibb.co/kmZCmG
https://ibb.co/eMB3tw
https://ibb.co/mQsMfb
https://ibb.co/dpf7Lb
Silentsx1 said:
here i cant do anything plz help
https://ibb.co/kmZCmG
https://ibb.co/eMB3tw
https://ibb.co/mQsMfb
https://ibb.co/dpf7Lb
Click to expand...
Click to collapse
Do you have twrp installed on your phone ? If, yes try to boot into it.
I have a similar problem with my LG Spirit. When it tries to boot, it shows an error message: Boot Verification Fail, DIFFERENT_HASH... After that it just restarts endlessly... I can't enter download mode, because the computer doesn't recognize it when I plug it in via usb cable... The only thing I can do is to get to the hard reset screen, but that is useless because it just restarts and shows the same error mentioned above... I'm out of ideas, the only thing that comes to my mind is to try and see if Ubuntu recognizes it, but then again, there's no LG Flash Tool made for Linux, or is there?
Sorry for mistakes, english is not my native language.
Hrastostit said:
I have a similar problem with my LG Spirit. When it tries to boot, it shows an error message: Boot Verification Fail, DIFFERENT_HASH... After that it just restarts endlessly... I can't enter download mode, because the computer doesn't recognize it when I plug it in via usb cable... The only thing I can do is to get to the hard reset screen, but that is useless because it just restarts and shows the same error mentioned above... I'm out of ideas, the only thing that comes to my mind is to try and see if Ubuntu recognizes it, but then again, there's no LG Flash Tool made for Linux, or is there?
Sorry for mistakes, english is not my native language.
Click to expand...
Click to collapse
If your pc doesn't recognise it, try to find an another computer that you can try it on .
mayankjet said:
If your pc doesn't recognise it, try to find an another computer that you can try it on .
Click to expand...
Click to collapse
Thank's for your reply. I did just that, but without success... I also tried to do what MadjijaHacker wrote, but I can't get it right. I mean, I can enter in hard reset, but can't get to download mode. It seems that my phone is dead...

Hard bricked my phone please help

Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Can you enter fastboot mode?
No
varben said:
Can you enter fastboot mode?
Click to expand...
Click to collapse
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
You are in Diagnostics mode, it's pretty useless, you need to enter in EDL Mode and try a flash with MiFlashTool
Use "fastboot oem edl"
I don't know if your phone can receive fastboot commands in Diagnostics, just try...
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Alanjameson99 said:
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Click to expand...
Click to collapse
I tried to install super su from boooting twrp !
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
varben said:
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
Click to expand...
Click to collapse
im 100% sure battery is above 70
Anantha47 said:
im 100% sure battery is above 70
Click to expand...
Click to collapse
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
varben said:
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
Click to expand...
Click to collapse
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Anantha47 said:
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Click to expand...
Click to collapse
At least mi flash is recognizing the phone.
You can try with a different firmware, try with android 7 firmware.
P.s. now that I see better your phone is recognized as Qualcomm HS-USB Diagnostics 900E, it should be 9008
You should try to find the correct Qualcomm drivers...
I'm sorry you have to go through this.
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Anantha47 said:
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Click to expand...
Click to collapse
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
varben said:
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
Click to expand...
Click to collapse
I couldn't install those drivers it says windows need 64 bit drivers
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
There is a major diff in vid and for me! he has working fastboot and i dont so i cant use EDL too but thanks for suggesting
Anantha47 said:
I couldn't install those drivers it says windows need 64 bit drivers
Click to expand...
Click to collapse
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
varben said:
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
Click to expand...
Click to collapse
Thank you for your continuous support mate but my device is not listed in either adb or fastboot commands , hence that the method suggested my on_Latex is not going to work :'(
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
SrikanthMergu said:
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
Click to expand...
Click to collapse
That's the thing i cant get into fast boot! the screen turns on white mi logo appears and then goes black after i press vol down + power

Categories

Resources