Database Users

Help I bricked my phone

I tried tenfar's rooting process and tried to do "adb reboot edl" and it shut down and doesn't respond to anything. What do I do?

Just Press and Hold Power till you see ZTE LOGO.

DrakenFX said:
Just Press and Hold Power till you see ZTE LOGO.
Click to expand...
Click to collapse
OMG Thank you!!! I seriously thought I bricked it.
Now I can't get into edl mode.
How do I get into edl mode?

awsomjgp said:
OMG Thank you!!! I seriously thought I bricked it.
Now I can't get into edl mode.
How do I get into edl mode?
Click to expand...
Click to collapse
You were in edl mode.
Edl mode that just a black screen only way to tell is cuz in you device manager (PC) will show the port number been use. But of course you need to FOLLOW @tenfar guide ,install drivers and so on.

DrakenFX said:
You were in edl mode.
Edl mode that just a black screen only way to tell is cuz in you device manager (PC) will show the port number been use. But of course you need to FOLLOW @tenfar guide ,install drivers and so on.
Click to expand...
Click to collapse
Thank you. I got it to boot with the twrp 3.0.2-2 and the custom boot image.

Recover from Hard Brick (900e) - Revive our Z2 WITHOUT DATA LOSS

Hey!
Z2 owners that like to mess around with their phones are prone to get f#ked. I was there and I faced the problem some of you probably did - a hard brick. There are a ton of tutorials on how to fix it, but I believe I found a new way that doesn't envolve resetting it. I have only tried with twice on my phone, so I'm really looking forward to know if it's universal!
Scenario - Your phone has a black screen. The notification LED is on. If you hold the power button it flashes the ZUK logo and it vibrates. If you identify with this scenario, go forward!
1 - To turn off your device (if you haven't already), press the power + volume up. The phone will vibrate, flash the ZUK logo, turn off the LED and turn it on again. Continue holding both buttons. When the LED turns off again, REMOVE your fingers from both buttons right away. If done correctly, it won't come back again and the LED will be off
2 - Hold both Volume Up and Volume Down at the same time. Connect to the computer. You should encounter your Fastboot mode (with your baseband and other info blank).
3 - Go to your email and redownload the bootloader unlocker. Yes, remember that file? Use it. You can use one of those unlock bootloader tutorials online, but if you know what you're doing, here's the command:
fastboot -i 0x2b4c flash unlock unlock_bootloader.img
4 - Right after that, run this other command
fastboot -i 0x2b4c oem unlock-go
That's it. You should be able to go to the recovery (flash it again just to be sure). Try it out and tell me how it goes.

not working...phone is gettin turned off...but holding up and down..then connecting is doin nothing..it just keeps on going on and off again

This method worked for me,thank a lot of,great trick
Sent from my Redmi Note 3 using Tapatalk

you my friend, are a god among men, i owe you a beer.

fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz

vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked

paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
hey thnks bro...i successfully enabled 9008 port and flashed firmware
thanku so much

Where were you man I have to cut my wire and format my phone for flashing new firmware

My phone don't show the led light
No button combination works
I was restoring twrp backup and the next boot...And i was bricked
It shows diagnostic mode 900E
Please help

Finally done
vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Had the same problem and first i went to download mode by following the the below link
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
then i downloaded the stock firmware and followed this guide
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
Both of them helped.:good::fingers-crossed: hope they work for you

Please tell me the process for recover from hard brick, because zukfans.eu is no longer available.

paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
What is the process??? Please tell me here because zukfans.eu is not accessable

Rit2005 said:
What is the process??? Please tell me here because zukfans.eu is not accessable
Click to expand...
Click to collapse
Hi ..very sorry..not using z2 plus for a long time..I forgot the process what I did..I followed the steps mentioned there.

[HELP] LG Spirit H440N cannot access to Download mode

Hi everyone, i have a big problem. Today i was trying to help a firend of mine by unlocking his bootloader on this phone but i got a strange message when i was trying to boot in Download mode. The message was:
"fastboot init( )
loading keystore failed status 5 usb init ept @ 0x8f20700
udc_start( )
fastboot: processing commands"
Basically it doesn't allowed me to enter in Download mode, so no reverting to v10f software, no pushing aboot, no twrp and no Marshmallow zip. Nothing at all, i could do nothing. In the following lines i will tell you what i did and tried:
1) Using different PC usb ports, no way to make it work
2) Using different cables, no way to make it work
3) Trying to boot in Download mode by removing battery and try without it, desperate, obviously no way to make it work
I spent two hours trying to find a way to make it work but i failed miserably...so i'm here hoping someone better than me can help me.
NOTES:
The phone was on original Lollipop firmware v10e (Italy) but rooted.
Basically i did nothing, just tried to put it in download mode (Vol - and plug usb in), tried also other ways but nothing showed up
When the phone is connected to pc (when it's on) it charges only, don't show the option to use mtp so... i think adb won't work
Hope it can help and hope you can help! XD

I had same error, cause of flashing the wron zip basically i needed to get into repair mode and use adb while its trying to repair use adb commands to reboot to recovery
Sent from my LG-H440 using Tapatalk

MadjijaHacker said:
I had same error, cause of flashing the wron zip basically i needed to get into repair mode and use adb while its trying to repair use adb commands to reboot to recovery
Sent from my LG-H440 using Tapatalk
Click to expand...
Click to collapse
But i need Download mode, not recovery. With adb i can access it?
P.S i didn't flash anything

Well, that's what helped me, i don't know was that helpful, you can still try repair mode
Giuskiller said:
But i need Download mode, not recovery. With adb i can access it?
P.S i didn't flash anything
Click to expand...
Click to collapse
Sent from my LG-H440 using Tapatalk

Giuskiller said:
Hi everyone, i have a big problem. Today i was trying to help a firend of mine by unlocking his bootloader on this phone but i got a strange message when i was trying to boot in Download mode. The message was:
"fastboot init( )
loading keystore failed status 5 usb init ept @ 0x8f20700
udc_start( )
fastboot: processing commands"
...
NOTES:
The phone was on original Lollipop firmware v10e (Italy) but rooted.
Basically i did nothing, just tried to put it in download mode (Vol - and plug usb in), tried also other ways but nothing showed up
...
Hope it can help and hope you can help! XD
Click to expand...
Click to collapse
Upload mode is phone off, press VOL+ and then plug the USB.
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
MadjijaHacker said:
I had same error, cause of flashing the wron zip basically i needed to get into repair mode and use adb while its trying to repair use adb commands to reboot to recovery
Sent from my LG-H440 using Tapatalk
Click to expand...
Click to collapse
Can you give more details? How can I access that repair mode and how to use adb commands on it? I have a bricked board that I want to put back on use.

jorlando said:
Upload mode is phone off, press VOL+ and then plug the USB
Click to expand...
Click to collapse
Hi, i tried vol + but the phone just boots... i will try again and let you know in the evening

When device is off hold Vol- and power key until LG logo appear, then release the keys and hold them again, its really hard to time it correctly, but if you do you will get a factory reset option, on that screen you navigate using Vol+ and - buttons and power button is ok
Sent from my LG-H440 using Tapatalk

MadjijaHacker said:
When device is off hold Vol- and power key until LG logo appear, then release the keys and hold them again, its really hard to time it correctly, but if you do you will get a factory reset option, on that screen you navigate using Vol+ and - buttons and power button is ok
Sent from my LG-H440 using Tapatalk
Click to expand...
Click to collapse
Thank you, after the factory reset the combination Vol+ and USB worked (after a few try) and i was able to boot in Download mode, then i flashev v10f, rooted and pushed modified aboot, flashed twrp 1.1.0 with flashify (twrp official app failed many times) and finally installed v20b and supersu. Everything works as expected =)

Giuskiller said:
Thank you, after the factory reset the combination Vol+ and USB worked (after a few try) and i was able to boot in Download mode, then i flashev v10f, rooted and pushed modified aboot, flashed twrp 1.1.0 with flashify (twrp official app failed many times) and finally installed v20b and supersu. Everything works as expected =)
Click to expand...
Click to collapse
I am glad i could help [emoji2]
Sent from my LG-H440 using Tapatalk

oh man same problem if u fix this let me now how plzzzzzzz

Silentsx1 said:
oh man same problem if u fix this let me now how plzzzzzzz
Click to expand...
Click to collapse
Is there anything you can do on your phone or is it completely dead ?

I can enter the hardrester but itis not helping and in fastboot itis saying FAILED (remote: unknown command)

Silentsx1 said:
I can enter the hardrester but itis not helping and in fastboot itis saying FAILED (remote: unknown command)
Click to expand...
Click to collapse
Try to boot into download mode, if you can. Turn off your device then press and hold vol. Up and plug in the cable.

i cant turn off my device legit after i put battery fastboot show up :crying::crying::crying::crying:

Silentsx1 said:
i cant turn off my device legit after i put battery fastboot show up :crying::crying::crying::crying:
Click to expand...
Click to collapse
Can you post a screenshot here ?

here i cant do anything plz help
https://ibb.co/kmZCmG
https://ibb.co/eMB3tw
https://ibb.co/mQsMfb
https://ibb.co/dpf7Lb

Silentsx1 said:
here i cant do anything plz help
https://ibb.co/kmZCmG
https://ibb.co/eMB3tw
https://ibb.co/mQsMfb
https://ibb.co/dpf7Lb
Click to expand...
Click to collapse
Do you have twrp installed on your phone ? If, yes try to boot into it.

I have a similar problem with my LG Spirit. When it tries to boot, it shows an error message: Boot Verification Fail, DIFFERENT_HASH... After that it just restarts endlessly... I can't enter download mode, because the computer doesn't recognize it when I plug it in via usb cable... The only thing I can do is to get to the hard reset screen, but that is useless because it just restarts and shows the same error mentioned above... I'm out of ideas, the only thing that comes to my mind is to try and see if Ubuntu recognizes it, but then again, there's no LG Flash Tool made for Linux, or is there?
Sorry for mistakes, english is not my native language.

Hrastostit said:
I have a similar problem with my LG Spirit. When it tries to boot, it shows an error message: Boot Verification Fail, DIFFERENT_HASH... After that it just restarts endlessly... I can't enter download mode, because the computer doesn't recognize it when I plug it in via usb cable... The only thing I can do is to get to the hard reset screen, but that is useless because it just restarts and shows the same error mentioned above... I'm out of ideas, the only thing that comes to my mind is to try and see if Ubuntu recognizes it, but then again, there's no LG Flash Tool made for Linux, or is there?
Sorry for mistakes, english is not my native language.
Click to expand...
Click to collapse
If your pc doesn't recognise it, try to find an another computer that you can try it on .

mayankjet said:
If your pc doesn't recognise it, try to find an another computer that you can try it on .
Click to expand...
Click to collapse
Thank's for your reply. I did just that, but without success... I also tried to do what MadjijaHacker wrote, but I can't get it right. I mean, I can enter in hard reset, but can't get to download mode. It seems that my phone is dead...

A2017U Brick

Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.

wichiepr said:
Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.
Click to expand...
Click to collapse
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package

Choose an username... said:
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package
Click to expand...
Click to collapse
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez

wichiepr said:
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez
Click to expand...
Click to collapse
deleted

atakan33 said:
deleted
Click to expand...
Click to collapse
What I delete? everything that I select is the same screen

wichiepr said:
What I delete? everything that I select is the same screen
Click to expand...
Click to collapse
Qualcomm HS_USB QLoader9008 or XX9008 ?

atakan33 said:
Qualcomm HS_USB QLoader9008 or XX9008 ?
Click to expand...
Click to collapse
QDLoader 9008 (COM3)

wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
well, you should talk to @djkuz

wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
maybe try MiFlash

atakan33 said:
maybe try MiFlash
Click to expand...
Click to collapse
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.

wichiepr said:
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.
Click to expand...
Click to collapse
The Led was flashing red and now it turn of, no action so far

wichiepr said:
The Led was flashing red and now it turn of, no action so far
Click to expand...
Click to collapse
If I am on you.I unlock bootloader and flash twrp

atakan33 said:
If I am on you.I unlock bootloader and flash twrp
Click to expand...
Click to collapse
I will as soon I can load it. look now that the battery is low. I going to try again using
tool.bat to see if I can unlock to flash twrp after the battery charge

wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
Can you rec the video of working my EDL TOOL on your PC?

djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.

wichiepr said:
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.
Click to expand...
Click to collapse
I wait and It didn't load, it stay on the ZTE Screen. I did mage to turn it off , now I try to put it one EDL or any recovery but is not loading. I try with all button combination with out any lock, I start with the ZTE screen and after that It show a flash trying to load the MUI and the light turn off, I don't heard the sound of the usb on the computer and is not loading any driver.

Log attach Part 1 and Flash.log is part 2. I was able to fLash your B32 and is start with the ZTE screen and the screen goes black, Is not loading stay black

Log FIle
Attach the log files

DFU
djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.

wichiepr said:
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.
Click to expand...
Click to collapse
Only test-pont may put the phone into EDL mode

Help sort of "bricked" phone to unbrick!

My Asus Zenfone Max Pro M1 is stuck on the screen," Powered by Android". I have neither rooted nor unlocked the bootloader. I had received the error of "Your device is corrupted" and had followed the guide to remove that. For a month, my phone lagged and had a drop in battery. Restarting it has caused it to not work.Now, it's showing no signs of starting. Any help will be sincerely appreciated!

manav113 said:
My Asus Zenfone Max Pro M1 is stuck on the screen," Powered by Android". I have neither rooted nor unlocked the bootloader. I had received the error of "Your device is corrupted" and had followed the guide to remove that. For a month, my phone lagged and had a drop in battery. Restarting it has caused it to not work.Now, it's showing no signs of starting. Any help will be sincerely appreciated!
Click to expand...
Click to collapse
download 059 fastboot rom[search in forum you will find 059 fastboot rom. it is in-(how to use flashtool thread)]
unzip it.
connect your phone with pc as in fastboot mode.
double click on flashallAFT.bat or .cmd file from fastboot rom folder.
059 fresh installtion will be donw by this although you will lose all your data so please backup if possible.
after that if u still have that 'your device is corrupt' error follow my thread . corrupt state fix command dosnt mess with your system whatsoever. so either u deleted some files accidently or it got deleted during update. dont blame any buddy regarding that.

P53mutant said:
download 059 fastboot rom[search in forum you will find 059 fastboot rom. it is in-(how to use flashtool thread)]
unzip it.
connect your phone with pc as in fastboot mode.
double click on flashallAFT.bat or .cmd file from fastboot rom folder.
059 fresh installtion will be donw by this although you will lose all your data so please backup if possible.
after that if u still have that 'your device is corrupt' error follow my thread . corrupt state fix command dosnt mess with your system whatsoever. so either u deleted some files accidently or it got deleted during update. dont blame any buddy regarding that.
Click to expand...
Click to collapse
Thanks for Replying bro. TMy phone is not going to any mode ie neither fastboot nor recovery. Its only showing Powered by Android whatever combinations I go with.I am thinking to try the QFIL s/w.

manav113 said:
Thanks for Replying bro. TMy phone is not going to any mode ie neither fastboot nor recovery. Its only showing Powered by Android whatever combinations I go with.I am thinking to try the QFIL s/w.
Click to expand...
Click to collapse
go for qfil then but use 059 qfil otherwise 130 qfill u will lose your persist,factory,fsg partition. doownload 059 fastboot rom . it is combined fastboot qfill rom. use it same as other qfill rom but choose here ww_no-nfc_no-fsg raw program.
btw your device showing powered by android that means u can go into fastboot mode and recovery mode both. just press and hold power button untill u see restart of ur screen. as soon as u see that press violume up along with power key. u will def get acess to fastboot mode.

P53mutant said:
go for qfil then but use 059 qfil otherwise 130 qfill u will lose your persist,factory,fsg partition. doownload 059 fastboot rom . it is combined fastboot qfill rom. use it same as other qfill rom but choose here ww_no-nfc_no-fsg raw program.
btw your device showing powered by android that means u can go into fastboot mode and recovery mode both. just press and hold power button untill u see restart of ur screen. as soon as u see that press violume up along with power key. u will def get acess to fastboot mode.
Click to expand...
Click to collapse
Didn't worked.. QFIL s/w was not able to detect the port even after connecting the mobile.. Tried to completely discharge and recharge hoping it would work.. Now, its not even recharging.. Nothing works now..Feels like a motherboard problem now..Should I rebuy the 4GB version or look for another mobile?

Try asus service center

manav113 said:
Didn't worked.. QFIL s/w was not able to detect the port even after connecting the mobile.. Tried to completely discharge and recharge hoping it would work.. Now, its not even recharging.. Nothing works now..Feels like a motherboard problem now..Should I rebuy the 4GB version or look for another mobile?
Click to expand...
Click to collapse
motherboard issue not lead to sudden death of phone. did u encounter random reboot before every 10-20 mins if not no worry.
for qfill u have to turn off your phone and press vol + and vol - together and have to connect your hpone with pc. check device manager of pc it will show port and comt device 2-3 mins after successfull qualcomm diag port driver installation.

98har**** said:
Try asus service center
Click to expand...
Click to collapse
No response. They said they aren't able to fix it. Can give 1k for the lcd screen.. :crying:

P53mutant said:
motherboard issue not lead to sudden death of phone. did u encounter random reboot before every 10-20 mins if not no worry.
for qfill u have to turn off your phone and press vol + and vol - together and have to connect your hpone with pc. check device manager of pc it will show port and comt device 2-3 mins after successfull qualcomm diag port driver installation.
Click to expand...
Click to collapse
Didn't had any random reboot stuff. I thought voltage fluctuations might have affected it. I had charged it at the Airport the same day the phone gave up. The QFIL software was not able to detect port even while pressing vol+ and vol- .Service Centre tells me its a PCB problem and are asking 3k for repair. Looks like a new phone is somewhere in the line for future.

manav113 said:
Didn't had any random reboot stuff. I thought voltage fluctuations might have affected it. I had charged it at the Airport the same day the phone gave up. The QFIL software was not able to detect port even while pressing vol+ and vol- .Service Centre tells me its a PCB problem and are asking 3k for repair. Looks like a new phone is somewhere in the line for future.
Click to expand...
Click to collapse
well good riddance