Help I bricked my phone - ZTE Axon 7 Questions & Answers

I tried tenfar's rooting process and tried to do "adb reboot edl" and it shut down and doesn't respond to anything. What do I do?

Just Press and Hold Power till you see ZTE LOGO.

DrakenFX said:
Just Press and Hold Power till you see ZTE LOGO.
Click to expand...
Click to collapse
OMG Thank you!!! I seriously thought I bricked it.
Now I can't get into edl mode.
How do I get into edl mode?

awsomjgp said:
OMG Thank you!!! I seriously thought I bricked it.
Now I can't get into edl mode.
How do I get into edl mode?
Click to expand...
Click to collapse
You were in edl mode.
Edl mode that just a black screen only way to tell is cuz in you device manager (PC) will show the port number been use. But of course you need to FOLLOW @tenfar guide ,install drivers and so on.

DrakenFX said:
You were in edl mode.
Edl mode that just a black screen only way to tell is cuz in you device manager (PC) will show the port number been use. But of course you need to FOLLOW @tenfar guide ,install drivers and so on.
Click to expand...
Click to collapse
Thank you. I got it to boot with the twrp 3.0.2-2 and the custom boot image.

Related

Recover from Hard Brick (900e) - Revive our Z2 WITHOUT DATA LOSS

Hey!
Z2 owners that like to mess around with their phones are prone to get f#ked. I was there and I faced the problem some of you probably did - a hard brick. There are a ton of tutorials on how to fix it, but I believe I found a new way that doesn't envolve resetting it. I have only tried with twice on my phone, so I'm really looking forward to know if it's universal!
Scenario - Your phone has a black screen. The notification LED is on. If you hold the power button it flashes the ZUK logo and it vibrates. If you identify with this scenario, go forward!
1 - To turn off your device (if you haven't already), press the power + volume up. The phone will vibrate, flash the ZUK logo, turn off the LED and turn it on again. Continue holding both buttons. When the LED turns off again, REMOVE your fingers from both buttons right away. If done correctly, it won't come back again and the LED will be off
2 - Hold both Volume Up and Volume Down at the same time. Connect to the computer. You should encounter your Fastboot mode (with your baseband and other info blank).
3 - Go to your email and redownload the bootloader unlocker. Yes, remember that file? Use it. You can use one of those unlock bootloader tutorials online, but if you know what you're doing, here's the command:
fastboot -i 0x2b4c flash unlock unlock_bootloader.img
4 - Right after that, run this other command
fastboot -i 0x2b4c oem unlock-go
That's it. You should be able to go to the recovery (flash it again just to be sure). Try it out and tell me how it goes.
not working...phone is gettin turned off...but holding up and down..then connecting is doin nothing..it just keeps on going on and off again
This method worked for me,thank a lot of,great trick
Sent from my Redmi Note 3 using Tapatalk
you my friend, are a god among men, i owe you a beer.
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
hey thnks bro...i successfully enabled 9008 port and flashed firmware
thanku so much
Where were you man I have to cut my wire and format my phone for flashing new firmware
My phone don't show the led light
No button combination works
I was restoring twrp backup and the next boot...And i was bricked
It shows diagnostic mode 900E
Please help
Finally done
vardhan21 said:
fastboot mode conncted and flash unlockbootloader.img file..but not boot mobile shows error msg .my bootloader is unlocked any suggestion plz
Click to expand...
Click to collapse
Had the same problem and first i went to download mode by following the the below link
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
then i downloaded the stock firmware and followed this guide
https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/
Both of them helped.:good::fingers-crossed: hope they work for you
Please tell me the process for recover from hard brick, because zukfans.eu is no longer available.
paps2k3 said:
Same thing happened to me..followed this link https://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ as my phone showed 900E mode in Qfil ...followed and unbricked..mine bootloader also showed as unlocked
Click to expand...
Click to collapse
What is the process??? Please tell me here because zukfans.eu is not accessable
Rit2005 said:
What is the process??? Please tell me here because zukfans.eu is not accessable
Click to expand...
Click to collapse
Hi ..very sorry..not using z2 plus for a long time..I forgot the process what I did..I followed the steps mentioned there.

Hard bricked my phone please help

Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Can you enter fastboot mode?
No
varben said:
Can you enter fastboot mode?
Click to expand...
Click to collapse
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
You are in Diagnostics mode, it's pretty useless, you need to enter in EDL Mode and try a flash with MiFlashTool
Use "fastboot oem edl"
I don't know if your phone can receive fastboot commands in Diagnostics, just try...
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Alanjameson99 said:
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Click to expand...
Click to collapse
I tried to install super su from boooting twrp !
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
varben said:
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
Click to expand...
Click to collapse
im 100% sure battery is above 70
Anantha47 said:
im 100% sure battery is above 70
Click to expand...
Click to collapse
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
varben said:
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
Click to expand...
Click to collapse
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Anantha47 said:
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Click to expand...
Click to collapse
At least mi flash is recognizing the phone.
You can try with a different firmware, try with android 7 firmware.
P.s. now that I see better your phone is recognized as Qualcomm HS-USB Diagnostics 900E, it should be 9008
You should try to find the correct Qualcomm drivers...
I'm sorry you have to go through this.
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Anantha47 said:
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Click to expand...
Click to collapse
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
varben said:
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
Click to expand...
Click to collapse
I couldn't install those drivers it says windows need 64 bit drivers
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
There is a major diff in vid and for me! he has working fastboot and i dont so i cant use EDL too but thanks for suggesting
Anantha47 said:
I couldn't install those drivers it says windows need 64 bit drivers
Click to expand...
Click to collapse
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
varben said:
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
Click to expand...
Click to collapse
Thank you for your continuous support mate but my device is not listed in either adb or fastboot commands , hence that the method suggested my on_Latex is not going to work :'(
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
SrikanthMergu said:
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
Click to expand...
Click to collapse
That's the thing i cant get into fast boot! the screen turns on white mi logo appears and then goes black after i press vol down + power

A2017U Brick

Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.
wichiepr said:
Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.
Click to expand...
Click to collapse
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package
Choose an username... said:
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package
Click to expand...
Click to collapse
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez
wichiepr said:
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez
Click to expand...
Click to collapse
deleted
atakan33 said:
deleted
Click to expand...
Click to collapse
What I delete? everything that I select is the same screen
wichiepr said:
What I delete? everything that I select is the same screen
Click to expand...
Click to collapse
Qualcomm HS_USB QLoader9008 or XX9008 ?
atakan33 said:
Qualcomm HS_USB QLoader9008 or XX9008 ?
Click to expand...
Click to collapse
QDLoader 9008 (COM3)
wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
well, you should talk to @djkuz
wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
maybe try MiFlash
atakan33 said:
maybe try MiFlash
Click to expand...
Click to collapse
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.
wichiepr said:
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.
Click to expand...
Click to collapse
The Led was flashing red and now it turn of, no action so far
wichiepr said:
The Led was flashing red and now it turn of, no action so far
Click to expand...
Click to collapse
If I am on you.I unlock bootloader and flash twrp
atakan33 said:
If I am on you.I unlock bootloader and flash twrp
Click to expand...
Click to collapse
I will as soon I can load it. look now that the battery is low. I going to try again using
tool.bat to see if I can unlock to flash twrp after the battery charge
wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
Can you rec the video of working my EDL TOOL on your PC?
djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.
wichiepr said:
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.
Click to expand...
Click to collapse
I wait and It didn't load, it stay on the ZTE Screen. I did mage to turn it off , now I try to put it one EDL or any recovery but is not loading. I try with all button combination with out any lock, I start with the ZTE screen and after that It show a flash trying to load the MUI and the light turn off, I don't heard the sound of the usb on the computer and is not loading any driver.
Log attach Part 1 and Flash.log is part 2. I was able to fLash your B32 and is start with the ZTE screen and the screen goes black, Is not loading stay black
Log FIle
Attach the log files
DFU
djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.
wichiepr said:
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.
Click to expand...
Click to collapse
Only test-pont may put the phone into EDL mode

[SOLVED!] Hard Bricked 6T Help Pls

Hi internet,
I obviously need help. I accidently bricked my 6T again and it seems to be permenant. I tried to used the MSMdownloadtool but the tool can't detect the device. And the device is in a Qualcomm CrashDump Mode. It shows Attempted to kill init! exit code=0x0000000b do_exit. I got to go but is there a way to fix this.
You must post in Q/A not here
Tapatalké depuis mon OnePlus 6T Havoc OS avec FP !
What were u exactly trying to do while this happened ?
Extreme_Ninja2099 said:
Hi internet,
I obviously need help. I accidently bricked my 6T again and it seems to be permenant. I tried to used the MSMdownloadtool but the tool can't detect the device. And the device is in a Qualcomm CrashDump Mode. It shows Attempted to kill init! exit code=0x0000000b do_exit. I got to go but is there a way to fix this.
Click to expand...
Click to collapse
You can restore you device using fastboot rom. Search for oos 6t fastboot rom.. There are guides for installation.
P.S. It will give a whole bunch of error in the cmd during installation but don't interrupt the process as your device will be restored in the end
Use Mnm tool to fix your phone. It can fix hard brick devices and guidance is there how to use .
PS: this is not right place post next time post on Q/A section.
Hold all the buttons down till it shuts off, almost a full minute. Then get it to boot to fastboot, power off. Then start up msm, then while phone is unplugged and off, hold both vol buttons for a 4 count, then plug it in. Msm will day connected, hit start. Let it finish and reboot. that's all
Qualcomm crashdump is not the same as download mode, and will not work with MSM. You still need to put your device manually into download mode.
parker.stephens said:
Qualcomm crashdump is not the same as download mode, and will not work with MSM. You still need to put your device manually into download mode.
Click to expand...
Click to collapse
Hold down every button till it shuts off, then force reboot to bootloader, then select power off to make sure it's off. Then do as I instructed above to fix it. Sometimes u can just run a fastboot rom to fix it, or boot twrp and flash a rom. I do this multiple times a day sometimes.
fullofhell said:
Hold all the buttons down till it shuts off, almost a full minute. Then get it to boot to fastboot, power off. Then start up msm, then while phone is unplugged and off, hold both vol buttons for a 4 count, then plug it in. Msm will day connected, hit start. Let it finish and reboot. that's all
Click to expand...
Click to collapse
Thanks everyone who replied. The whole thing started when I tried to update my TWRP the wrong way and I got nothing better to do. I was on 3.2.3-1 and the newest on the website (TWRP) was 3.2.3-2, but I flashed the image instead, into vendor. This got me into the Qualcomm CrashDump Mode and it kept on rebooting to it as well. There was no way that I was be able to use the MSMDownload tool to recover my 6T as the tool couldn't detect my device as it was connected as Qualcomm HS-USB Diagnostics 900E not Qualcomm HS-USB QDloader 9008.
I pressed all the buttons and got into FASTBOOT mode! Then I booted TWRP, luckily all my stuff isn't corrupted and I did a Nandroid backup beforehand as well. So, I just restored my Nandroid backup and voila I got my 6T back. Thanks again everyone
Extreme_Ninja2099 said:
Thanks everyone who replied. The whole thing started when I tried to update my TWRP the wrong way and I got nothing better to do. I was on 3.2.3-1 and the newest on the website (TWRP) was 3.2.3-2, but I flashed the image instead, into vendor. This got me into the Qualcomm CrashDump Mode and it kept on rebooting to it as well. There was no way that I was be able to use the MSMDownload tool to recover my 6T as the tool couldn't detect my device as it was connected as Qualcomm HS-USB Diagnostics 900E not Qualcomm HS-USB QDloader 9008.
I pressed all the buttons and got into FASTBOOT mode! Then I booted TWRP, luckily all my stuff isn't corrupted and I did a Nandroid backup beforehand as well. So, I just restored my Nandroid backup and voila I got my 6T back. Thanks again everyone
Click to expand...
Click to collapse
Everybody, it's called the MSMDownload Tool. It cannot be used in Fastboot Mode or Qualcomm CrashDump Mode, it can only be used in EDL Mode (Emergency Download Mode).
I have onplus 6t international i reset my device now its stuck on fastboot mode locked i cant enable oem unlocked in devlopers because my 6t is stuck on fastboot what to do please help
CaptionNixx said:
I have onplus 6t international i reset my device now its stuck on fastboot mode locked i cant enable oem unlocked in devlopers because my 6t is stuck on fastboot what to do please help
Click to expand...
Click to collapse
Power off use msm. Done.
fullofhell said:
Power off use msm. Done.
Click to expand...
Click to collapse
I did that but its shows conected when i press start its work for 5s then its shows N/A in connection area
CaptionNixx said:
I did that but its shows conected when i press start its work for 5s then its shows N/A in connection area
Click to expand...
Click to collapse
If your using windows search for device manager to see what your device is being detected as. Try and reboot if your device isn't Qualcomm HS-USB QDloader 9008. Once it shows that try and update the driver, but you'll need to be a admin. Have you installed Oneplus USB Drivers?
Extreme_Ninja2099 said:
If your using windows search for device manager to see what your device is being detected as. Try and reboot if your device isn't Qualcomm HS-USB QDloader 9008. Once it shows that try and update the driver, but you'll need to be a admin. Have you installed Oneplus USB Drivers?
Click to expand...
Click to collapse
Yes i did that and driver is fully installed Qualcomm HS-USB QDloader 9008 and there is No yallow sigh in driver
Try closing the MSMDownload tool and opening it again. This happened to me when I used MSMDownload Tool and restarting made my device connected
Extreme_Ninja2099 said:
Try closing the MSMDownload tool and opening it again. This happened to me when I used MSMDownload Tool and restarting made my device connected
Click to expand...
Click to collapse
Thanks brother its done
Help I can not get in to fastboot mode. Im stuck in Crashdump mode. Even when i power off the phone holding powerbutton down for a while it will powerup again and the unlocked bootloader warning window with "press power key to pause boot" will not react to any presses.
Also booting and holding down power+down will result in the same and go to crashdump mode.
What do I do
Voldemort13 said:
Help I can not get in to fastboot mode. Im stuck in Crashdump mode. Even when i power off the phone holding powerbutton down for a while it will powerup again and the unlocked bootloader warning window with "press power key to pause boot" will not react to any presses.
Also booting and holding down power+down will result in the same and go to crashdump mode.
What do I do
Click to expand...
Click to collapse
did yoy got any solution

Phone reboots out of edl mode

I'm trying to put phone in edl but it keeps rebooting out of it.
Mchlbenner51 said:
I'm trying to put phone in edl but it keeps rebooting out of it.
Click to expand...
Click to collapse
Yeah it will. You have to have the software ready to go. As soon as it's in EDL mode and detected by PC, start the flash.
Thanks for your reply I'm coming from 6t which can be difficult to get out of edl.

Categories

Resources