Related
I tried tenfar's rooting process and tried to do "adb reboot edl" and it shut down and doesn't respond to anything. What do I do?
Just Press and Hold Power till you see ZTE LOGO.
DrakenFX said:
Just Press and Hold Power till you see ZTE LOGO.
Click to expand...
Click to collapse
OMG Thank you!!! I seriously thought I bricked it.
Now I can't get into edl mode.
How do I get into edl mode?
awsomjgp said:
OMG Thank you!!! I seriously thought I bricked it.
Now I can't get into edl mode.
How do I get into edl mode?
Click to expand...
Click to collapse
You were in edl mode.
Edl mode that just a black screen only way to tell is cuz in you device manager (PC) will show the port number been use. But of course you need to FOLLOW @tenfar guide ,install drivers and so on.
DrakenFX said:
You were in edl mode.
Edl mode that just a black screen only way to tell is cuz in you device manager (PC) will show the port number been use. But of course you need to FOLLOW @tenfar guide ,install drivers and so on.
Click to expand...
Click to collapse
Thank you. I got it to boot with the twrp 3.0.2-2 and the custom boot image.
Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.
wichiepr said:
Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.
Click to expand...
Click to collapse
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package
Choose an username... said:
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package
Click to expand...
Click to collapse
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez
wichiepr said:
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez
Click to expand...
Click to collapse
deleted
atakan33 said:
deleted
Click to expand...
Click to collapse
What I delete? everything that I select is the same screen
wichiepr said:
What I delete? everything that I select is the same screen
Click to expand...
Click to collapse
Qualcomm HS_USB QLoader9008 or XX9008 ?
atakan33 said:
Qualcomm HS_USB QLoader9008 or XX9008 ?
Click to expand...
Click to collapse
QDLoader 9008 (COM3)
wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
well, you should talk to @djkuz
wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
maybe try MiFlash
atakan33 said:
maybe try MiFlash
Click to expand...
Click to collapse
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.
wichiepr said:
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.
Click to expand...
Click to collapse
The Led was flashing red and now it turn of, no action so far
wichiepr said:
The Led was flashing red and now it turn of, no action so far
Click to expand...
Click to collapse
If I am on you.I unlock bootloader and flash twrp
atakan33 said:
If I am on you.I unlock bootloader and flash twrp
Click to expand...
Click to collapse
I will as soon I can load it. look now that the battery is low. I going to try again using
tool.bat to see if I can unlock to flash twrp after the battery charge
wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
Can you rec the video of working my EDL TOOL on your PC?
djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.
wichiepr said:
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.
Click to expand...
Click to collapse
I wait and It didn't load, it stay on the ZTE Screen. I did mage to turn it off , now I try to put it one EDL or any recovery but is not loading. I try with all button combination with out any lock, I start with the ZTE screen and after that It show a flash trying to load the MUI and the light turn off, I don't heard the sound of the usb on the computer and is not loading any driver.
Log attach Part 1 and Flash.log is part 2. I was able to fLash your B32 and is start with the ZTE screen and the screen goes black, Is not loading stay black
Log FIle
Attach the log files
DFU
djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.
wichiepr said:
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.
Click to expand...
Click to collapse
Only test-pont may put the phone into EDL mode
Hi,
Does anyone know how to force EDL 9008 mode on the essential ph-1. Through fastboot the command reboot-edl does not put it into edl. Also attaching D+ and Gnd during power on of the USB cable also does not work. Was hoping someone knows the secret to forcing the phone into this mode.
Thanks
Have you seen this thread?
https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292
kboya said:
Have you seen this thread?
https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292
Click to expand...
Click to collapse
As I said in my post, I tried fastboot reboot-edl commands and it just reboots into normal mode. I also built the special usb type C cable that has a switch to gnd D+ on bootup to try and force the mode. I was looking for alternatives.
Thanks
Delete... Wrong thread
hellgod12 said:
As I said in my post, I tried fastboot reboot-edl commands and it just reboots into normal mode. I also built the special usb type C cable that has a switch to gnd D+ on bootup to try and force the mode. I was looking for alternatives.
Thanks
Click to expand...
Click to collapse
I have since tried to do
reboot-emergency
reboot-recovery
reboot-EDL
All these commands simple make the phone reset like normal. There has to be a way to force emergency download mode on this essential phone.
Hello
As I said in your previous publication, follow these steps:
Before you connect the phone to the cable, enter fastboot mode
Plug the phone into the cable Connect the black and green wire with some and do not separate them
In the phone scroll to the reboot bootloader and press the power button
The phone will turn off and switch to EDL mode
Then connect the phone to the normal cable means without shorts
If the phone is running in bootloader mode, try again
I hope you succeed in the process
I also will not give up and will try to fix the phone in eBay mode
https://youtu.be/FSlqiVcIw34
mouraj2 said:
https://youtu.be/FSlqiVcIw34
Click to expand...
Click to collapse
Your phone must be different. I can do the exact same thing and my phone never goes to edl, it goes back to powered by android.
In edl mode
OK, I put my ph-1 essential in EDL mode by shorting the black and green wire just like in the youtube; Device Manager shows "Qualcomm HS-USB QDLoader 9003 (COM3)" under "Ports (COM & LPT)"
Am I really in EDL mode and if the answer is yes - now what I do?
why do you want to do in the 9008 mode? do you mean you can flash rome rom in 9008 mode?
dmc123 said:
why do you want to do in the 9008 mode? do you mean you can flash rome rom in 9008 mode?
Click to expand...
Click to collapse
Yes, the phone is softbricked in bootloop and unless there is a way to force flashing in fastboot this seems like the way to go.
I Successfully entered edl. Thanks.
What do I do next?
Sent from my SM-G935V using Tapatalk
WiseLance said:
I Successfully entered edl. Thanks.
What do I do next?
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Well, that is what I want to say.....
Do you guys have 9008 rom to flash via EDL?
vipseifer said:
Do you guys have 9008 rom to flash via EDL?
Click to expand...
Click to collapse
The only way to flash anything in 9008 mode is to have the PH-1 programmer files, which have not been released or leaked.
If your phone is under warranty, Essential might help you (they seem to be helping people who got bricked while updating Q beta).
help me!!!
help please i can't get out of the edl mode on my PH1 and how can i flash the rom please help me
>.>
lesterf said:
The only way to flash anything in 9008 mode is to have the PH-1 programmer files, which have not been released or leaked.
If your phone is under warranty, Essential might help you (they seem to be helping people who got bricked while updating Q beta).
Click to expand...
Click to collapse
**drive.google.com/file/d/
Those smart enough to figure this puzzle out will be rewarded. lol
1YrrADiaFRGGxf03FUuNUAVOrzwrMpZ6e/view?usp=sharing
Funny enough, there's an EDL target in adb
adb reboot edl
Some advice, please?
Ou.discreet.21 said:
**drive.google.com/file/d/
Those smart enough to figure this puzzle out will be rewarded. lol
1YrrADiaFRGGxf03FUuNUAVOrzwrMpZ6e/view?usp=sharing
Click to expand...
Click to collapse
Any chance you could provide me with some sort of instructions or direction? I've tried several different versions of QPST to no avail now. On the advice of a redditor, I was directed to try the CLI version of emmcdl but I can't even find a windows compatible build of this.
I have nothing against exploring/reading/learning but it sucks not being able to even start. I'd love to know if I'm even just on the right track.
Further Advise Needed!
Ou.discreet.21 said:
**drive.google.com/file/d/
Those smart enough to figure this puzzle out will be rewarded. lol
1YrrADiaFRGGxf03FUuNUAVOrzwrMpZ6e/view?usp=sharing
Click to expand...
Click to collapse
My Essential Phone is a hard brick now with no response at all (no logo, no light..). And when I connect it with my computer, it is recognized as 9008 immediately, I downloaded your file and fill them in the QFIL, but every time I click the "Download" button, the sound of USB devices unplugged appears, and it fails all the time with an information that goes
ERROR: function: rx_data:247 Error occurred while reading from COM port
ERROR: function: sahara_main:983 Sahara protocol error
ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
I have no idea why these arise, since I am confident the driver was installed correctly. I even suspect that is it even the real 9008 mode? I'd appreciate it if you could give me some advice on how to flash this ROM, tks!
Hi internet,
I obviously need help. I accidently bricked my 6T again and it seems to be permenant. I tried to used the MSMdownloadtool but the tool can't detect the device. And the device is in a Qualcomm CrashDump Mode. It shows Attempted to kill init! exit code=0x0000000b do_exit. I got to go but is there a way to fix this.
You must post in Q/A not here
Tapatalké depuis mon OnePlus 6T Havoc OS avec FP !
What were u exactly trying to do while this happened ?
Extreme_Ninja2099 said:
Hi internet,
I obviously need help. I accidently bricked my 6T again and it seems to be permenant. I tried to used the MSMdownloadtool but the tool can't detect the device. And the device is in a Qualcomm CrashDump Mode. It shows Attempted to kill init! exit code=0x0000000b do_exit. I got to go but is there a way to fix this.
Click to expand...
Click to collapse
You can restore you device using fastboot rom. Search for oos 6t fastboot rom.. There are guides for installation.
P.S. It will give a whole bunch of error in the cmd during installation but don't interrupt the process as your device will be restored in the end
Use Mnm tool to fix your phone. It can fix hard brick devices and guidance is there how to use .
PS: this is not right place post next time post on Q/A section.
Hold all the buttons down till it shuts off, almost a full minute. Then get it to boot to fastboot, power off. Then start up msm, then while phone is unplugged and off, hold both vol buttons for a 4 count, then plug it in. Msm will day connected, hit start. Let it finish and reboot. that's all
Qualcomm crashdump is not the same as download mode, and will not work with MSM. You still need to put your device manually into download mode.
parker.stephens said:
Qualcomm crashdump is not the same as download mode, and will not work with MSM. You still need to put your device manually into download mode.
Click to expand...
Click to collapse
Hold down every button till it shuts off, then force reboot to bootloader, then select power off to make sure it's off. Then do as I instructed above to fix it. Sometimes u can just run a fastboot rom to fix it, or boot twrp and flash a rom. I do this multiple times a day sometimes.
fullofhell said:
Hold all the buttons down till it shuts off, almost a full minute. Then get it to boot to fastboot, power off. Then start up msm, then while phone is unplugged and off, hold both vol buttons for a 4 count, then plug it in. Msm will day connected, hit start. Let it finish and reboot. that's all
Click to expand...
Click to collapse
Thanks everyone who replied. The whole thing started when I tried to update my TWRP the wrong way and I got nothing better to do. I was on 3.2.3-1 and the newest on the website (TWRP) was 3.2.3-2, but I flashed the image instead, into vendor. This got me into the Qualcomm CrashDump Mode and it kept on rebooting to it as well. There was no way that I was be able to use the MSMDownload tool to recover my 6T as the tool couldn't detect my device as it was connected as Qualcomm HS-USB Diagnostics 900E not Qualcomm HS-USB QDloader 9008.
I pressed all the buttons and got into FASTBOOT mode! Then I booted TWRP, luckily all my stuff isn't corrupted and I did a Nandroid backup beforehand as well. So, I just restored my Nandroid backup and voila I got my 6T back. Thanks again everyone
Extreme_Ninja2099 said:
Thanks everyone who replied. The whole thing started when I tried to update my TWRP the wrong way and I got nothing better to do. I was on 3.2.3-1 and the newest on the website (TWRP) was 3.2.3-2, but I flashed the image instead, into vendor. This got me into the Qualcomm CrashDump Mode and it kept on rebooting to it as well. There was no way that I was be able to use the MSMDownload tool to recover my 6T as the tool couldn't detect my device as it was connected as Qualcomm HS-USB Diagnostics 900E not Qualcomm HS-USB QDloader 9008.
I pressed all the buttons and got into FASTBOOT mode! Then I booted TWRP, luckily all my stuff isn't corrupted and I did a Nandroid backup beforehand as well. So, I just restored my Nandroid backup and voila I got my 6T back. Thanks again everyone
Click to expand...
Click to collapse
Everybody, it's called the MSMDownload Tool. It cannot be used in Fastboot Mode or Qualcomm CrashDump Mode, it can only be used in EDL Mode (Emergency Download Mode).
I have onplus 6t international i reset my device now its stuck on fastboot mode locked i cant enable oem unlocked in devlopers because my 6t is stuck on fastboot what to do please help
CaptionNixx said:
I have onplus 6t international i reset my device now its stuck on fastboot mode locked i cant enable oem unlocked in devlopers because my 6t is stuck on fastboot what to do please help
Click to expand...
Click to collapse
Power off use msm. Done.
fullofhell said:
Power off use msm. Done.
Click to expand...
Click to collapse
I did that but its shows conected when i press start its work for 5s then its shows N/A in connection area
CaptionNixx said:
I did that but its shows conected when i press start its work for 5s then its shows N/A in connection area
Click to expand...
Click to collapse
If your using windows search for device manager to see what your device is being detected as. Try and reboot if your device isn't Qualcomm HS-USB QDloader 9008. Once it shows that try and update the driver, but you'll need to be a admin. Have you installed Oneplus USB Drivers?
Extreme_Ninja2099 said:
If your using windows search for device manager to see what your device is being detected as. Try and reboot if your device isn't Qualcomm HS-USB QDloader 9008. Once it shows that try and update the driver, but you'll need to be a admin. Have you installed Oneplus USB Drivers?
Click to expand...
Click to collapse
Yes i did that and driver is fully installed Qualcomm HS-USB QDloader 9008 and there is No yallow sigh in driver
Try closing the MSMDownload tool and opening it again. This happened to me when I used MSMDownload Tool and restarting made my device connected
Extreme_Ninja2099 said:
Try closing the MSMDownload tool and opening it again. This happened to me when I used MSMDownload Tool and restarting made my device connected
Click to expand...
Click to collapse
Thanks brother its done
Help I can not get in to fastboot mode. Im stuck in Crashdump mode. Even when i power off the phone holding powerbutton down for a while it will powerup again and the unlocked bootloader warning window with "press power key to pause boot" will not react to any presses.
Also booting and holding down power+down will result in the same and go to crashdump mode.
What do I do
Voldemort13 said:
Help I can not get in to fastboot mode. Im stuck in Crashdump mode. Even when i power off the phone holding powerbutton down for a while it will powerup again and the unlocked bootloader warning window with "press power key to pause boot" will not react to any presses.
Also booting and holding down power+down will result in the same and go to crashdump mode.
What do I do
Click to expand...
Click to collapse
did yoy got any solution
I bought phone in Australia it had Android 11 I tried to flash oxygen os 11 using fastboot but the phone is stuck in fastboot loop.
I tried almost every step on google.
Unable to put phone in EDL mode to flash phone to oxygen using MSM tool .
Is there any way to put phone in EDL mode?
Is it possible what I am trying Moving from Android 11 to Oxygen OS
Thank you for you help guys
SamOne2 said:
I bought phone in Australia it had Android 11 I tried to flash oxygen os 11 using fastboot but the phone is stuck in fastboot loop.
I tried almost every step on google.
Unable to put phone in EDL mode to flash phone to oxygen using MSM tool .
Is there any way to put phone in EDL mode?
Is it possible what I am trying Moving from Android 11 to Oxygen OS
Thank you for you help guys
Click to expand...
Click to collapse
Did you do a reset from recovery?
magicmckinney said:
Did you do a reset from recovery?
Click to expand...
Click to collapse
Yes I did reset - wipe all data. still no go. I just flashed jaguar rom which worked fine but unable to flash Oxygen OS
SamOne2 said:
Yes I did reset - wipe all data. still no go. I just flashed jaguar rom which worked fine but unable to flash Oxygen OS
Click to expand...
Click to collapse
Then try one of the fastboot roms. I have had my best luck with Android 10 versions. Once you get any OOS, you can easily do a OTA update to the rom of your choice.
EDL is really hard to get into from Windows 10/11. The only way I can get it to work is on an old machine with Windows 7.
SamOne2 said:
I bought phone in Australia it had Android 11 I tried to flash oxygen os 11 using fastboot but the phone is stuck in fastboot loop.
I tried almost every step on google.
Unable to put phone in EDL mode to flash phone to oxygen using MSM tool .
Is there any way to put phone in EDL mode?
Is it possible what I am trying Moving from Android 11 to Oxygen OS
Thank you for you help guy
Click to expand...
Click to collapse
EDL mode works. Simply follow the procedure but press start before you connect your phone and dont connect any other android device. EDL mode does not work exactly as described in the thread here but it works well.
magicmckinney said:
Then try one of the fastboot roms. I have had my best luck with Android 10 versions. Once you get any OOS, you can easily do a OTA update to the rom of your choice.
EDL is really hard to get into from Windows 10/11. The only way I can get it to work is on an old machine with Windows 7.
Click to expand...
Click to collapse
I tried few times ..it's failing on param preload failed...
SamOne2 said:
I tried few times ..it's failing on param preload failed...
Click to expand...
Click to collapse
If you tried the Android 10 version then your only choice is to MSM it back to stock.
Try this
Turn your phone off.
Fire up the MSM Download Tool. Hit start in the Download tool so it will be sniffing for a phone.
Hold down volume up & volume down while plugging your phone into your computer. When the MSM progran connects and starts installing, let go of the buttons.
If it doesn't work, you just need to keep trying it. Make sure you hit vol+/- at the same time and hold for a few seconds, plug in the USB cable, then let off the vol keys. It's difficult to do and get right with two hands.
Sometimes it will also work if hard reset out of the boot process which means hit VU+VD+Power when it is booting up. Just make sure you have hit the Start button in the MSM toll so it will be searching for your phone and auto start when it catches your phone in the right mode.
You can also run adb reboot edl.
magicmckinney said:
If you tried the Android 10 version then your only choice is to MSM it back to stock.
Try this
Turn your phone off.
Fire up the MSM Download Tool. Hit start in the Download tool so it will be sniffing for a phone.
Hold down volume up & volume down while plugging your phone into your computer. When the MSM progran connects and starts installing, let go of the buttons.
If it doesn't work, you just need to keep trying it. Make sure you hit vol+/- at the same time and hold for a few seconds, plug in the USB cable, then let off the vol keys. It's difficult to do and get right with two hands.
Sometimes it will also work if hard reset out of the boot process which means hit VU+VD+Power when it is booting up. Just make sure you have hit the Start button in the MSM toll so it will be searching for your phone and auto start when it catches your phone in the right mode.
Click to expand...
Click to collapse
Thank you..I will try that.. I just tried to flash but it kept throwing param preload failed... I have uninstaled and reinstalled Qualcomm drivers, still same
Flashing is not allowed for Critical Partitions when flashing using fastboot​I tired these command but it shwos already unlcoked
fastboot flashing unlock
fastboot flashing unlock_critical
Is there fix to unlock critical partitions
SamOne2 said:
Thank you..I will try that.. I just tried to flash but it kept throwing param preload failed... I have uninstaled and reinstalled Qualcomm drivers, still same
Click to expand...
Click to collapse
Thank you everyone.. I was able to flash using MSM
SamOne2 said:
Thank you..I will try that.. I just tried to flash but it kept throwing param preload failed... I have uninstaled and reinstalled Qualcomm drivers, still same
Click to expand...
Click to collapse
Looking around, the vast majority of problems people encounter while trying the MSM Tool is with the Qualcomm drivers.
Check this site for MSM errors and fixes.
How to Fix Stuck in Param Preload error MSM Download Tool
In this tutorial, we will show you how to fix Stuck in Param Preload, Sahara communication failed, and other MSM Download Tool errors.
www.droidwin.com
Try to boot twrp, then use TWRP to go to edl mode.
SamOne2 said:
Thank you everyone.. I was able to flash using MSM
Click to expand...
Click to collapse
Ah didn't see this...nvm