Database Users

[BRICKED!] Redmi 3S where can i identify test points and force into EDL mode?

ii just got my redmi 3s and i just bricked it. it does not boot up into any splash logo, recovery or download mode, just always stays on black screen until battery dies then it flashes red if i power on. now when i plug it in to the computer the only thing that pops up is Qualcomm HS-USB Diagnostics 900E which i dont need. i need qualcomm hs-usb qdloader 9008 but no tools detect the phone other then QFIL and even when i give it all the files it just says
Code:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Failed to Switch to Emergency Download mode
Download Fail:Switch To EDL FailFireHose Fail
Finish Download
i have tried touching random copper points on the board but nothing reboots the phone into EDL.

Maybe
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
---------- Post added at 08:26 PM ---------- Previous post was at 08:16 PM ----------
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
Better idea is search Ali express for "deep flash cable xiaomi"

jazz452 said:
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
---------- Post added at 08:26 PM ---------- Previous post was at 08:16 PM ----------
Found this, not sure if it's what you looking for,
http://en.miui.com/thread-286357-1-1.html
Better idea is search Ali express for "deep flash cable xiaomi"
Click to expand...
Click to collapse
wow thats very interesting, ill try to buy one.
been reading on it for a bit. think this can really work?

or you can purchase something called a jig i hope i spelled it properly from ebay or amazon it shorts the usb testpoints and puts your phone into edl or fastboot mode

xdarkmario said:
wow thats very interesting, ill try to buy one.
been reading on it for a bit. think this can really work?
Click to expand...
Click to collapse
If the test points work the cable should, maybe the other cable will work, seems strange that they say to use to deep flash cable though, sure these people know about the jig cable so wouldn't chance it.
https://www.youtube.com/watch?v=DJZ6Ka7mrIA
You can buy cable in UK
http://www.fonefunshop.co.uk/cable_picker/99673_Xiaomi_Deep_Flash_Cable.html
Even get a how to on the page.

You can also try this unbrick guide on MIUI forum.
http://en.miui.com/thread-327861-1-1.html

He can't get to recovery.

xdarkmario said:
ii just got my redmi 3s and i just bricked it. it does not boot up into any splash logo, recovery or download mode, just always stays on black screen until battery dies then it flashes red if i power on. now when i plug it in to the computer the only thing that pops up is Qualcomm HS-USB Diagnostics 900E which i dont need. i need qualcomm hs-usb qdloader 9008 but no tools detect the phone other then QFIL and even when i give it all the files it just says
Code:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Failed to Switch to Emergency Download mode
Download Fail:Switch To EDL FailFireHose Fail
Finish Download
i have tried touching random copper points on the board but nothing reboots the phone into EDL.
Click to expand...
Click to collapse
try this
Boot into fastboot mode and connect your phone to pc
open command window and type fastboot oem edl
It worked for me

Kanth's said:
try this
Boot into fastboot mode and connect your phone to pc
open command window and type fastboot oem edl
It worked for me
Click to expand...
Click to collapse
again, still cant do that. I cant do anything. I brought the cable a couple of days ago so when it gets here ill try it, if not then ill send it to warranty repair

xdarkmario said:
again, still cant do that. I cant do anything. I brought the cable a couple of days ago so when it gets here ill try it, if not then ill send it to warranty repair
Click to expand...
Click to collapse
Is it hardbricked?

Kanth's said:
Is it hardbricked?
Click to expand...
Click to collapse
yes i assume hitting power immediately puts it into Qualcomm HS-USB Diagnostics 900E mode, no screens no lights

xdarkmario said:
yes i assume hitting power immediately puts it into Qualcomm HS-USB Diagnostics 900E mode, no screens no lights
Click to expand...
Click to collapse
Take a look at this one - http://xiaomitips.com/guide/how-to-fix-bricked-redmi-3s-on-miui-7-8/

Kanth's said:
Take a look at this one - http://xiaomitips.com/guide/how-to-fix-bricked-redmi-3s-on-miui-7-8/
Click to expand...
Click to collapse
of course i have tried this before.
Please bear in mind that the method of reflashing Android ROM can only works fixing soft-bricked devices and NOT for hard-bricked ones.
Click to expand...
Click to collapse

I softbricked my redmi 3s as well, because I disabled some google apps.
Needless to say, you have to:
1. manually update/install qualcomm driver (when your phone in download mode).
2. download a fastboot rom
3. download miphone miflash tool, enable "flash all" option when you flash the fastboot rom.
there's a thread here on xda as well. search for bricked redmi 3 workaround.

do you want to enter download mode?
pressing vol up + vol down at once (Off position), and put in the USB cable
If the phone is on turn off 1st and imediatelly put in USB cable while, press vol up+ vol down

can you enter to fastboot?

I have same problem on my Redmi 3 Pro. No fastboot, No booting, No blink red light, No Charging, but if my device plug on pc it detected QC bla.. bla.. on port device manager. I don't know what to do anymore. *hopeless* *tearr* :crying:

the only way for hard brick is test points or deep flash cable, end of, I would go with cable less chance of breaking something while taking phone apart. If the phone is detected then it's only semi hard brick and can be fixed with Mi flash tool.
http://en.miui.com/thread-235865-1-1.html
http://en.miui.com/thread-254606-1-1.html
might be better.
but remeber to download the rom for your device.

xdarkmario said:
ii just got my redmi 3s and i just bricked it. it does not boot up into any splash logo, recovery or download mode, just always stays on black screen until battery dies then it flashes red if i power on. now when i plug it in to the computer the only thing that pops up is Qualcomm HS-USB Diagnostics 900E which i dont need. i need qualcomm hs-usb qdloader 9008 but no tools detect the phone other then QFIL and even when i give it all the files it just says
Code:
Start Download
COM Port number:4
Switch To EDL
Download Fail:Failed to Switch to Emergency Download mode
Download Fail:Switch To EDL FailFireHose Fail
Finish Download
i have tried touching random copper points on the board but nothing reboots the phone into EDL.
Click to expand...
Click to collapse
What did you do to brick it? Please tell us so that new users don't face the same problem as you

Ptmaroct said:
What did you do to brick it? Please tell us so that new users don't face the same problem as you
Click to expand...
Click to collapse
That's a good valid point

Zenfone max (Z010D).Flashed wrong rom. Device bricked. Not even starting

So, I side loaded build no. 13.8.26.76 to my phone, not knowing that it was meant only for the snapdragon 410 counterpart (mine is 615 one). It installed successfully until I rebooted and phone stayed dead. I think I hard bricked it
No logo, no charging, can't enter recovery or fastboot. No nothing... Connected device to PC, and windows doesn't recognize it.
Please help me....

sree27 said:
So, I side loaded build no. 13.8.26.76 to my phone, not knowing that it was meant only for the snapdragon 410 counterpart (mine is 615 one). It installed successfully until I rebooted and phone stayed dead. I think I hard bricked it
No logo, no charging, can't enter recovery or fastboot. No nothing... Connected device to PC, and windows doesn't recognize it.
Please help me....
Click to expand...
Click to collapse
Can you go to recovery mode ?? If yes please flash your device compatibility custom rom like RR rom ..if u cant go to even recovery mode..
RIP asus zenfone max Just Change your Motherboard of your phone
Thanks

Its dead u can recover i also had same issue ...mine works now ....email me [email protected]

Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?

MJMarra34 said:
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
Click to expand...
Click to collapse
Check my post for detailed instructions. And yes, I did face that issue and fixed it by reinserting the battery. It's a bit risky, but worth a try. Try watching some YouTube teardown videos

sree27 said:
Check my post for detailed instructions. And yes, I did face that issue and fixed it by reinserting the battery. It's a bit risky, but worth a try. Try watching some YouTube teardown videos
Click to expand...
Click to collapse
Oh Great! do you have a link of your instructions man? thank you! so I really have to dissassemble the phone?

MJMarra34 said:
Oh Great! do you have a link of your instructions man? thank you! so I really have to dissassemble the phone?
Click to expand...
Click to collapse
It's on my profile. I haven't mentioned the disassembly part since it was not required in general cases. Check my profile for the detailed instructions

Hey Man. I'm currently working on my phone. I already tried removing the battery but I'm still getting the error:
Download Fail: Switch to EDL Fail.
hopes are going narrow. Now I don't know what to do.

MJMarra34 said:
Hey Man. I'm currently working on my phone. I already tried removing the battery but I'm still getting the error:
Download Fail: Switch to EDL Fail.
hopes are going narrow. Now I don't know what to do.
Click to expand...
Click to collapse
Are you on fastboot mode? What is on your display?

Im still at the part with the QFIL. Im retrying it right now bruh.. hmmm

MJMarra34 said:
Im still at the part with the QFIL. Im retrying it right now bruh.. hmmm
Click to expand...
Click to collapse
If you're having trouble with QFIL, best thing to do is uninstall Qualcomm drivers, reboot, reinstall, try again. Repeat until you can flash without problem.
I had to uninstall many times. Don't lose hope. It takes a lot of effort

hey Sree. I noticed that it is being detected as Qualcomm HS-USB diagnostics 9006. So what I did is I forced driver to install Qualcomm HS-USB QDLoader 9008. I'm now having a Sahara error. I'll try reinstalling drivers but I have a quastion. Does QFIL version matter ?

MJMarra34 said:
hey Sree. I noticed that it is being detected as Qualcomm HS-USB diagnostics 9006. So what I did is I forced driver to install Qualcomm HS-USB QDLoader 9008. I'm now having a Sahara error. I'll try reinstalling drivers but I have a quastion. Does QFIL version matter ?
Click to expand...
Click to collapse
I don't know. I used the latest one. Try the version linked in my original post. Also, of you're getting sahara fail, it's ok. You're on right track. Uninstall driver, reboot and reinstall. It'll take hell a lot of tries, but will work eventually

Hard bricked my phone please help

Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help

Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Can you enter fastboot mode?

No
varben said:
Can you enter fastboot mode?
Click to expand...
Click to collapse
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?

Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
You are in Diagnostics mode, it's pretty useless, you need to enter in EDL Mode and try a flash with MiFlashTool
Use "fastboot oem edl"
I don't know if your phone can receive fastboot commands in Diagnostics, just try...

Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.

Alanjameson99 said:
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Click to expand...
Click to collapse
I tried to install super su from boooting twrp !

Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.

varben said:
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
Click to expand...
Click to collapse
im 100% sure battery is above 70

Anantha47 said:
im 100% sure battery is above 70
Click to expand...
Click to collapse
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.

varben said:
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
Click to expand...
Click to collapse
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot

Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...

Anantha47 said:
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Click to expand...
Click to collapse
At least mi flash is recognizing the phone.
You can try with a different firmware, try with android 7 firmware.
P.s. now that I see better your phone is recognized as Qualcomm HS-USB Diagnostics 900E, it should be 9008
You should try to find the correct Qualcomm drivers...
I'm sorry you have to go through this.

om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process

Anantha47 said:
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Click to expand...
Click to collapse
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/

varben said:
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
Click to expand...
Click to collapse
I couldn't install those drivers it says windows need 64 bit drivers

om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
There is a major diff in vid and for me! he has working fastboot and i dont so i cant use EDL too but thanks for suggesting

Anantha47 said:
I couldn't install those drivers it says windows need 64 bit drivers
Click to expand...
Click to collapse
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0

varben said:
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
Click to expand...
Click to collapse
Thank you for your continuous support mate but my device is not listed in either adb or fastboot commands , hence that the method suggested my on_Latex is not going to work :'(

Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not

SrikanthMergu said:
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
Click to expand...
Click to collapse
That's the thing i cant get into fast boot! the screen turns on white mi logo appears and then goes black after i press vol down + power

A2017U Brick

Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.

wichiepr said:
Need Help
I have one Axon 7 BRICK. it show the logo and the red light turn on and shortly turn off,the Qualcomm HS_USB XX9008 is showing on the Device Manager but is not showing any device using ADB. The usb is connecting to the PC and after the red light turn off it disconnect. I was able in one occasion to connect to the recovery mode and select Recovery mode when it reboot it turn off.
Click to expand...
Click to collapse
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package

Choose an username... said:
fyi this doesn't go in this section
That's an EDL brick, pretty easy on the U's. Of course ADB is not gonna detect it, because that mode only has the EDL connection, no fastboot or adb or anything else.
Use djkuz's EDL Tool with an U package
Click to expand...
Click to collapse
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez

wichiepr said:
The program stay at : Loading the programer: prog_ufs_fierehose_8996_ddr.elf
And look to me that is freez
Click to expand...
Click to collapse
deleted

atakan33 said:
deleted
Click to expand...
Click to collapse
What I delete? everything that I select is the same screen

wichiepr said:
What I delete? everything that I select is the same screen
Click to expand...
Click to collapse
Qualcomm HS_USB QLoader9008 or XX9008 ?

atakan33 said:
Qualcomm HS_USB QLoader9008 or XX9008 ?
Click to expand...
Click to collapse
QDLoader 9008 (COM3)

wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
well, you should talk to @djkuz

wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
maybe try MiFlash

atakan33 said:
maybe try MiFlash
Click to expand...
Click to collapse
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.

wichiepr said:
I did and it did the flash and say success. I did saw the ZTE screens and it when off, I am waiting to see if it load.
Click to expand...
Click to collapse
The Led was flashing red and now it turn of, no action so far

wichiepr said:
The Led was flashing red and now it turn of, no action so far
Click to expand...
Click to collapse
If I am on you.I unlock bootloader and flash twrp

atakan33 said:
If I am on you.I unlock bootloader and flash twrp
Click to expand...
Click to collapse
I will as soon I can load it. look now that the battery is low. I going to try again using
tool.bat to see if I can unlock to flash twrp after the battery charge

wichiepr said:
QDLoader 9008 (COM3)
Click to expand...
Click to collapse
Can you rec the video of working my EDL TOOL on your PC?

djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.

wichiepr said:
YES I can, now it did load the ZTE screen and it look that is loading, is about 5 minutes, I will see if really load and let you know. If not I will go and do the record to you. I wlll try to unlock with the EDL tool.
Click to expand...
Click to collapse
I wait and It didn't load, it stay on the ZTE Screen. I did mage to turn it off , now I try to put it one EDL or any recovery but is not loading. I try with all button combination with out any lock, I start with the ZTE screen and after that It show a flash trying to load the MUI and the light turn off, I don't heard the sound of the usb on the computer and is not loading any driver.

Log attach Part 1 and Flash.log is part 2. I was able to fLash your B32 and is start with the ZTE screen and the screen goes black, Is not loading stay black

Log FIle
Attach the log files

DFU
djkuz said:
Can you rec the video of working my EDL TOOL on your PC?
Click to expand...
Click to collapse
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.

wichiepr said:
I try B35,32,29, after the 29 I try to goo to edl mode and when connected show ad different drive Handset Diagnostic XXDFU. Now I am stuck< can't put on EDL. Any idea how tofind EDL.
Click to expand...
Click to collapse
Only test-pont may put the phone into EDL mode

[SOLVED!] Hard Bricked 6T Help Pls

Hi internet,
I obviously need help. I accidently bricked my 6T again and it seems to be permenant. I tried to used the MSMdownloadtool but the tool can't detect the device. And the device is in a Qualcomm CrashDump Mode. It shows Attempted to kill init! exit code=0x0000000b do_exit. I got to go but is there a way to fix this.

You must post in Q/A not here
Tapatalké depuis mon OnePlus 6T Havoc OS avec FP !

What were u exactly trying to do while this happened ?

Extreme_Ninja2099 said:
Hi internet,
I obviously need help. I accidently bricked my 6T again and it seems to be permenant. I tried to used the MSMdownloadtool but the tool can't detect the device. And the device is in a Qualcomm CrashDump Mode. It shows Attempted to kill init! exit code=0x0000000b do_exit. I got to go but is there a way to fix this.
Click to expand...
Click to collapse
You can restore you device using fastboot rom. Search for oos 6t fastboot rom.. There are guides for installation.
P.S. It will give a whole bunch of error in the cmd during installation but don't interrupt the process as your device will be restored in the end

Use Mnm tool to fix your phone. It can fix hard brick devices and guidance is there how to use .
PS: this is not right place post next time post on Q/A section.

Hold all the buttons down till it shuts off, almost a full minute. Then get it to boot to fastboot, power off. Then start up msm, then while phone is unplugged and off, hold both vol buttons for a 4 count, then plug it in. Msm will day connected, hit start. Let it finish and reboot. that's all

Qualcomm crashdump is not the same as download mode, and will not work with MSM. You still need to put your device manually into download mode.

parker.stephens said:
Qualcomm crashdump is not the same as download mode, and will not work with MSM. You still need to put your device manually into download mode.
Click to expand...
Click to collapse
Hold down every button till it shuts off, then force reboot to bootloader, then select power off to make sure it's off. Then do as I instructed above to fix it. Sometimes u can just run a fastboot rom to fix it, or boot twrp and flash a rom. I do this multiple times a day sometimes.

fullofhell said:
Hold all the buttons down till it shuts off, almost a full minute. Then get it to boot to fastboot, power off. Then start up msm, then while phone is unplugged and off, hold both vol buttons for a 4 count, then plug it in. Msm will day connected, hit start. Let it finish and reboot. that's all
Click to expand...
Click to collapse
Thanks everyone who replied. The whole thing started when I tried to update my TWRP the wrong way and I got nothing better to do. I was on 3.2.3-1 and the newest on the website (TWRP) was 3.2.3-2, but I flashed the image instead, into vendor. This got me into the Qualcomm CrashDump Mode and it kept on rebooting to it as well. There was no way that I was be able to use the MSMDownload tool to recover my 6T as the tool couldn't detect my device as it was connected as Qualcomm HS-USB Diagnostics 900E not Qualcomm HS-USB QDloader 9008.
I pressed all the buttons and got into FASTBOOT mode! Then I booted TWRP, luckily all my stuff isn't corrupted and I did a Nandroid backup beforehand as well. So, I just restored my Nandroid backup and voila I got my 6T back. Thanks again everyone

Extreme_Ninja2099 said:
Thanks everyone who replied. The whole thing started when I tried to update my TWRP the wrong way and I got nothing better to do. I was on 3.2.3-1 and the newest on the website (TWRP) was 3.2.3-2, but I flashed the image instead, into vendor. This got me into the Qualcomm CrashDump Mode and it kept on rebooting to it as well. There was no way that I was be able to use the MSMDownload tool to recover my 6T as the tool couldn't detect my device as it was connected as Qualcomm HS-USB Diagnostics 900E not Qualcomm HS-USB QDloader 9008.
I pressed all the buttons and got into FASTBOOT mode! Then I booted TWRP, luckily all my stuff isn't corrupted and I did a Nandroid backup beforehand as well. So, I just restored my Nandroid backup and voila I got my 6T back. Thanks again everyone
Click to expand...
Click to collapse
Everybody, it's called the MSMDownload Tool. It cannot be used in Fastboot Mode or Qualcomm CrashDump Mode, it can only be used in EDL Mode (Emergency Download Mode).

I have onplus 6t international i reset my device now its stuck on fastboot mode locked i cant enable oem unlocked in devlopers because my 6t is stuck on fastboot what to do please help

CaptionNixx said:
I have onplus 6t international i reset my device now its stuck on fastboot mode locked i cant enable oem unlocked in devlopers because my 6t is stuck on fastboot what to do please help
Click to expand...
Click to collapse
Power off use msm. Done.

fullofhell said:
Power off use msm. Done.
Click to expand...
Click to collapse
I did that but its shows conected when i press start its work for 5s then its shows N/A in connection area

CaptionNixx said:
I did that but its shows conected when i press start its work for 5s then its shows N/A in connection area
Click to expand...
Click to collapse
If your using windows search for device manager to see what your device is being detected as. Try and reboot if your device isn't Qualcomm HS-USB QDloader 9008. Once it shows that try and update the driver, but you'll need to be a admin. Have you installed Oneplus USB Drivers?

Extreme_Ninja2099 said:
If your using windows search for device manager to see what your device is being detected as. Try and reboot if your device isn't Qualcomm HS-USB QDloader 9008. Once it shows that try and update the driver, but you'll need to be a admin. Have you installed Oneplus USB Drivers?
Click to expand...
Click to collapse
Yes i did that and driver is fully installed Qualcomm HS-USB QDloader 9008 and there is No yallow sigh in driver

Try closing the MSMDownload tool and opening it again. This happened to me when I used MSMDownload Tool and restarting made my device connected

Extreme_Ninja2099 said:
Try closing the MSMDownload tool and opening it again. This happened to me when I used MSMDownload Tool and restarting made my device connected
Click to expand...
Click to collapse
Thanks brother its done

Help I can not get in to fastboot mode. Im stuck in Crashdump mode. Even when i power off the phone holding powerbutton down for a while it will powerup again and the unlocked bootloader warning window with "press power key to pause boot" will not react to any presses.
Also booting and holding down power+down will result in the same and go to crashdump mode.
What do I do

Voldemort13 said:
Help I can not get in to fastboot mode. Im stuck in Crashdump mode. Even when i power off the phone holding powerbutton down for a while it will powerup again and the unlocked bootloader warning window with "press power key to pause boot" will not react to any presses.
Also booting and holding down power+down will result in the same and go to crashdump mode.
What do I do
Click to expand...
Click to collapse
did yoy got any solution