Hi.
My phone is bricked now.The phone can load 9008 mode.So I can use the qfil tool to unbrick it.But I need some files to rescue it. The file name like xxxx.mbn xxx.elf and rawprogram-flash0.xml.If you can provide
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
rukesh18 said:
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
Click to expand...
Click to collapse
you are right.
jackzhu said:
you are right.
Click to expand...
Click to collapse
So how'd you brick your phone?
jhill110 said:
So how'd you brick your phone?
Click to expand...
Click to collapse
I changed the blot to a by ADB command:laugh:
I also need QFIL image ...
me too.........
I can create an image but i'm having problems getting phone recognized by QFIL.
ZiemowitP said:
I can create one but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
trantium said:
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
Click to expand...
Click to collapse
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
ZiemowitP said:
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
Click to expand...
Click to collapse
Nope. When your turn it on, the backlight is dim so you can barely see the boot screen. Still no way to get it recognized on my pc
Any one have any luck with this?
Edl cable to enter in 9008 mode.
edl mode essential ph1
https://youtu.be/FSlqiVcIw34
ZiemowitP said:
I can create an image but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
help !can you give the image to me ?my PHONE has been dead to 9008
jackzhu said:
I changed the blot to a by ADB command:laugh:
Click to expand...
Click to collapse
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
stupidis said:
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
Click to expand...
Click to collapse
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Tech_Savvy said:
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Click to expand...
Click to collapse
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
In the dev section there's a thread
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
It refers to Back To Stock and the thread is [STOCK][DUMPS][FIRMWARE] Essential stock firmware and rom dumps*.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
Related
hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me
Y4HY4 said:
hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me
Click to expand...
Click to collapse
Can you get to download mode?
Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
no i can't my device is stopped working
Pull your battery and leave it out for at least ten minutes and try to get to download mode again.
Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
Tulsadiver said:
Pull your battery and leave it out for at least ten minutes and try to get to download mode again.
Click to expand...
Click to collapse
the result is same . it's not working !
Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Try pulling the battery and plug it into your computer with the OEM data cable. Wait for 10 minutes and try to start the phone without the battery. If it works, it's a damaged or low battery.
If it doesn't, see if it will hook up to Kies 3 to repair.
Last resort is call the manufacturer to see if they can help.
Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
i will try this. will it work ?
It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?
Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
Tulsadiver said:
It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?
Click to expand...
Click to collapse
it doesn't working sorry
It probably won't work but you don't have anything to lose trying.
Tulsadiver said:
It probably won't work but you don't have anything to lose trying.
Click to expand...
Click to collapse
will usb jig work on my phone?
Be worth a try.
Tulsadiver said:
Be worth a try.
Click to expand...
Click to collapse
ok . Thnx for u r support . i will try jig tomorrow
hi i tried to usb jig and it doesn't work plz help my phone is hard bricked
Y4HY4 said:
hi i tried to usb jig and it doesn't work plz help my phone is hard bricked
Click to expand...
Click to collapse
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.
Tulsadiver said:
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.
Click to expand...
Click to collapse
I left my phone to service. he will do JTAG repair on my phone if i am lucky
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
vegetaleb said:
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
Click to expand...
Click to collapse
thanx alot for ur reply.. but this is tutorial for flashing M9+.. i really checked before...
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
What exactly steps did you do to brick?
iElvis said:
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
Click to expand...
Click to collapse
simonbigwave said:
What exactly steps did you do to brick?
Click to expand...
Click to collapse
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
t-mobile_mda said:
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
Click to expand...
Click to collapse
device is not restarting the driver second time as Preloader Device...
You will probably have better luck posting in the M9+ forum. I have never heard of this flash tool, but the dedicated xda thread for it seems to be full of bricks.
From the sound of it, you either flashed the wrong file or flashed the right file to the wrong place.
Just curious if the pc detects the device will an RUU detect it?
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
Usually something like "USB Preloader Device" means a low-level brick because the PC can't tell what it is. For a RUU to work, it has to be detectable by ADB, not just Device Manager.
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
bigp951 said:
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
Click to expand...
Click to collapse
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
That flash tool seems scary to me... Sorry for not adding any advice!
TwinAdk said:
That flash tool seems scary to me...
Click to expand...
Click to collapse
I had the same thought, especially given the number of bricks reported in the thread.
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
A hardware un bricking tool (sure there used to be a tool for htc devices xtc was it? Could be wrong?) or RMA seems to be your only options now.
Obviously try the holding all buttons and waiting for the vibrate method then try to get to bootloader mode. If that fails I'd be aiming to get it replaced, good news is if it is totally bricked, chances are HTC will just think the bootloader went on you.
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
hi..
as i say above pc detects the device..preloader or mtk usbvcom... and only SDcard flashing possible.. not exist RUU..
0PK7IMG.zip
iElvis said:
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
Click to expand...
Click to collapse
really i tried all methods while it has rebooting the bootlaoder screen..i flashed the device with this tool finally..and totally dead..
TwinAdk said:
That flash tool seems scary to me... Sorry for not adding any advice!
Click to expand...
Click to collapse
iElvis said:
I had the same thought, especially given the number of bricks reported in the thread.
Click to expand...
Click to collapse
this flash tool is for MTK 6795 devices which HTC M9+ is one of them.. only these flashloaders accept it's scatter file.. (MT6795_Android_scatter.txt)
SP_Flash_Tool_exe_Windows_v5.1504.00.000
SP_Flash_Tool_exe_Windows_v5.1512.00.000
SP_Flash_Tool_exe_Windows_v5.1516.00.000
SP_Flash_Tool_exe_Windows_v5.1520.00.000
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
özkan72 said:
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
Click to expand...
Click to collapse
hi..
u mean u r on the same condition.? only vibrates and detects com port as Preloader..?
Hello,
I need the ROW back for my Nexus 6p.
Kjmahal said:
Hello,
I need the ROW back for my Nexus 6p.
Click to expand...
Click to collapse
Hello,
What happened? Maybe it's not totally dead yet...
Is your phone recognized in device manager when plugged on your computer?
Good luck...
5.1 said:
Hello,
What happened? Maybe it's not totally dead yet...
Is your phone recognized in device manager when plugged on your computer?
Good luck...
Click to expand...
Click to collapse
Yes is does show up when i plug it in. I tried flashing a custom ROM, after I pressed reboot it just went blank. Won't charge, Won't turn on. It is showing me that it is connected in QFIL.
Kjmahal said:
Yes is does show up when i plug it in. I tried flashing a custom ROM, after I pressed reboot it just went blank. Won't charge, Won't turn on. It is showing me that it is connected in QFIL.
Click to expand...
Click to collapse
Hey,
QD LOADER 9008?
Read this thread then: https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Some had better results than others.
Good luck...
5.1 said:
Hey,
QD LOADER 9008?
Read this thread then: https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Some had better results than others.
Good luck...
Click to expand...
Click to collapse
Thanks for the reply, I will try this now.
I have a TA-1033 version and a deep flash engerneering cable but im stuck of how to unbrick, my device is detected as QDLoader 9008, also if i try to flash using NOST i get "polling USB device" then a "DEVICE_NOT_CONFIGURE" its an 0x4000 error
if anyone can help me out that would be great!
Sent from my AGS_W09
I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.
DoggyStar said:
I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.
Click to expand...
Click to collapse
Its completely dead, only detected as QHSUSB BULK and like i said i got one of those deep flash cables from shenzen
When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.
DoggyStar said:
When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.
Click to expand...
Click to collapse
No mine just doesnt vibrate or anything
And you have full battery?
DoggyStar said:
And you have full battery?
Click to expand...
Click to collapse
I dont know because its dead as in it wont show any signs of life
Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.
DoggyStar said:
Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.
Click to expand...
Click to collapse
I modified my aboot.img because i thought i could downgrade but that killed my device
mattwhite7102 said:
I modified my aboot.img because i thought i could downgrade but that killed my device
Click to expand...
Click to collapse
Does qpst tool worked for you?
Emmykay223 said:
Does qpst tool worked for you?
Click to expand...
Click to collapse
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!
mattwhite7102 said:
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!
Click to expand...
Click to collapse
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here
Emmykay223 said:
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here
Click to expand...
Click to collapse
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...
mattwhite7102 said:
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...
Click to expand...
Click to collapse
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
It does get detected by qpst, might be a driver issue
Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"
mattwhite7102 said:
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"
Click to expand...
Click to collapse
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work
Emmykay223 said:
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work
Click to expand...
Click to collapse
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!
mattwhite7102 said:
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/
Emmykay223 said:
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/
Click to expand...
Click to collapse
I cant install these because my phone gets detcted as QHSUSB BULK
my phone maybe have hard brick ,even if plug it in computer ,it no any device,no qualcomm.
Charging ,long press power button ,or any what ever, it total no response.
what should I do :crying:
Thanks
throw it out, its toast
GGqe2!T5v said:
my phone maybe have hard brick ,even if plug it in computer ,it no any device,no qualcomm.
Charging ,long press power button ,or any what ever, it total no response.
what should I do :crying:
Thanks
Click to expand...
Click to collapse
Probably is dead, but what caused it, when did it happen? Have you tried force start (simulated battery pull)?
https://support.essential.com/hc/en-us/articles/360011974514-If-your-Essential-Phone-is-unresponsive
(Think someone said last month they only got this to work if had charger connected)
I flash img ,the path has bad char (中文字符),when reload bootload ,boom,it dead.
now I konw ,maybe I need a firehose programmer file, any other way to save it ?
GGqe2!T5v said:
I flash img ,the path has bad char (中文字符),when reload bootload ,boom,it dead.
now I konw ,maybe I need a firehose programmer file, any other way to save it ?
Click to expand...
Click to collapse
Wait, I thought you said it wouldn't turn on at all?
How did you flash an img file if your unit doesn't turn on?
I'd say if there is no life in it at all its probably gone. How did it happen?? Did it get water damage?
Now it in edl modle(9008), it seems impossible to recover it without the firehose file.
Any possible method？
GGqe2!T5v said:
Now it in edl modle(9008), it seems impossible to recover it without the firehose file.
Any possible method？
Click to expand...
Click to collapse
There are Qualcomm tools out there that can recover a soft brick like that.
Now you just need to flash a bootloader and it will be back up and running!
Did you try creating a ticket with Essential support??
GGqe2!T5v said:
Now it in edl modle(9008), it seems impossible to recover it without the firehose file.
Any possible method？
Click to expand...
Click to collapse
No...
No...
No...
rignfool said:
No...
No...
No...
Click to expand...
Click to collapse
How about something like this but using OTG?
St.Noigel said:
How about something like this but using OTG?
Click to expand...
Click to collapse
Does that say Essential?
There are enough people out there... If something could possibly work... Or if a whisper of unbricking is heard (though more than likely it's just @aer0zer0 farting)... There are literally DOZENS of people trying it...
And still failing
rignfool said:
Does that say Essential?
There are enough people out there... If something could possibly work... Or if a whisper of unbricking is heard (though more than likely it's just @aer0zer0 farting)... There are literally DOZENS of people trying it...
And still failing
Click to expand...
Click to collapse
half man, half myth, half legend, half fart, half awesome....
that's your aer0 @rignfool
GGqe2!T5v said:
Now it in edl modle(9008), it seems impossible to recover it without the firehose file.
Any possible method？
Click to expand...
Click to collapse
Try hold power + volume up and down the same time and keep hold it until you see the 'Shutdown' show on the top left corner of the phone, then turn it back on to see if it help.
Mine was loop to boot loader and every time i use recover it said data corrupted and I did the above step and I can restore back to stock after that. I don't know if it help but if there is no way but trash you can try it. Good luck )