I need a EMMC back because i bricked my phone. - Nexus 6P Q&A, Help & Troubleshooting

Hello,
I need the ROW back for my Nexus 6p.

Kjmahal said:
Hello,
I need the ROW back for my Nexus 6p.
Click to expand...
Click to collapse
Hello,
What happened? Maybe it's not totally dead yet...
Is your phone recognized in device manager when plugged on your computer?
Good luck...

5.1 said:
Hello,
What happened? Maybe it's not totally dead yet...
Is your phone recognized in device manager when plugged on your computer?
Good luck...
Click to expand...
Click to collapse
Yes is does show up when i plug it in. I tried flashing a custom ROM, after I pressed reboot it just went blank. Won't charge, Won't turn on. It is showing me that it is connected in QFIL.

Kjmahal said:
Yes is does show up when i plug it in. I tried flashing a custom ROM, after I pressed reboot it just went blank. Won't charge, Won't turn on. It is showing me that it is connected in QFIL.
Click to expand...
Click to collapse
Hey,
QD LOADER 9008?
Read this thread then: https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Some had better results than others.
Good luck...

5.1 said:
Hey,
QD LOADER 9008?
Read this thread then: https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Some had better results than others.
Good luck...
Click to expand...
Click to collapse
Thanks for the reply, I will try this now.

Related

plz help my phone not booting

hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me
Y4HY4 said:
hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me
Click to expand...
Click to collapse
Can you get to download mode?
Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
no i can't my device is stopped working
Pull your battery and leave it out for at least ten minutes and try to get to download mode again.
Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
Tulsadiver said:
Pull your battery and leave it out for at least ten minutes and try to get to download mode again.
Click to expand...
Click to collapse
the result is same . it's not working !
Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Try pulling the battery and plug it into your computer with the OEM data cable. Wait for 10 minutes and try to start the phone without the battery. If it works, it's a damaged or low battery.
If it doesn't, see if it will hook up to Kies 3 to repair.
Last resort is call the manufacturer to see if they can help.
Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
i will try this. will it work ?
It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?
Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
Tulsadiver said:
It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?
Click to expand...
Click to collapse
it doesn't working sorry
It probably won't work but you don't have anything to lose trying.
Tulsadiver said:
It probably won't work but you don't have anything to lose trying.
Click to expand...
Click to collapse
will usb jig work on my phone?
Be worth a try.
Tulsadiver said:
Be worth a try.
Click to expand...
Click to collapse
ok . Thnx for u r support . i will try jig tomorrow
hi i tried to usb jig and it doesn't work plz help my phone is hard bricked
Y4HY4 said:
hi i tried to usb jig and it doesn't work plz help my phone is hard bricked
Click to expand...
Click to collapse
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.
Tulsadiver said:
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.
Click to expand...
Click to collapse
I left my phone to service. he will do JTAG repair on my phone if i am lucky

S3 Neo doesn't start and doesn't respond to charge.

Hello!
I left connected phone for night with opened application. In the morning my phone doesn't start and doesn't respond to charge.
I can't enter into Recovery or Download Mode. I tried to remove the battery and insert it again but it didn't work.
Sorry for my bad English.
Regards!
Kanzee said:
Hello!
I left connected phone for night with opened application. In the morning my phone doesn't start and doesn't respond to charge.
Sorry for my bad English.
Regards!
Click to expand...
Click to collapse
What is the update now? Is your phone working or not?
Arsal7R said:
What is the update now? Is your phone working or not?
Click to expand...
Click to collapse
No, my phone doesn't work. I'm gonna connect him to charge and just wait. Maybe it gonna work.
Do you have any suggestions on what else can I do?
Kanzee said:
No, my phone doesn't work. I'm gonna connect him to charge and just wait. Maybe it gonna work.
Do you have any suggestions on what else can I do?
Click to expand...
Click to collapse
Connect it to a computer while you have odin running on that computer if your mobile is not dead it will show connected to pc on odin.
If there's nothing showing then it's bricked. But don't let it go. You can revive it.
Search this forum or Google it "how to unbrick Galaxy S3 Neo" " or whatever your model is"
Arsal7R said:
Connect it to a computer while you have odin running on that computer if your mobile is not dead it will show connected to pc on odin.
If there's nothing showing then it's bricked. But don't let it go. You can revive it.
Search this forum or Google it "how to unbrick Galaxy S3 Neo" " or whatever your model is"
Click to expand...
Click to collapse
I check it out and let you know.
@edit
My phone is bricked. Thank you anyway.
Oops i forgot one thing, connect it to a pc and press mobile's power button + Volume Down button.
Arsal7R said:
Oops i forgot one thing, connect it to a pc and press mobile's power button + Volume Down button.
Click to expand...
Click to collapse
Nothing happens.
Btw. I am gonna try this solution http://forum.xda-developers.com/galaxy-s3-neo/help/how-to-unbrick-t2911301
Kanzee said:
Nothing happens.
Btw. I am gonna try this solution http://forum.xda-developers.com/galaxy-s3-neo/help/how-to-unbrick-t2911301
Click to expand...
Click to collapse
Yes this is the last solution for you now. Try it but read those instructions carefully. Do not use any other MMC less than class 10.
Good luck.
Arsal7R said:
Yes this is the last solution for you now. Try it but read those instructions carefully. Do not use any other MMC less than class 10.
Good luck.
Click to expand...
Click to collapse
Thanks but how can I insert SD Card to my PC?
Kanzee said:
Thanks but how can I insert SD Card to my PC?
Click to expand...
Click to collapse
Through a card reader bro. Please read those instructions very very carefully and follow those steps. I hope this will work and your lovely s3 give you a happy smile.
Arsal7R said:
Through a card reader bro. Please read those instructions very very carefully and follow those steps. I hope this will work and your lovely s3 give you a happy smile.
Click to expand...
Click to collapse
Thank you again. And I hope it will work.
I let you know.
Kanzee said:
Thank you again. And I hope it will work.
I let you know.
Click to expand...
Click to collapse
You are welcome.
Arsal7R said:
You are welcome.
Click to expand...
Click to collapse
After I insert the SD Card into my phone I am trying to open Download Mode but nothing happens.
Kanzee said:
After I insert the SD Card into my phone I am trying to open Download Mode but nothing happens.
Click to expand...
Click to collapse
Try again. If fails, try another MMC with different capacity.

Maybe save the hardbrick

Hi.
My phone is bricked now.The phone can load 9008 mode.So I can use the qfil tool to unbrick it.But I need some files to rescue it. The file name like xxxx.mbn xxx.elf and rawprogram-flash0.xml.If you can provide
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
rukesh18 said:
I was in the same situation as you. I tried reaching out to a couple forums and had no luck. I eventually ended up paying $199 to get a replacement from Essential. I believe that is the only option at this time. No one seems to have the emmc files for Essential phone yet.
Click to expand...
Click to collapse
you are right.
jackzhu said:
you are right.
Click to expand...
Click to collapse
So how'd you brick your phone?
jhill110 said:
So how'd you brick your phone?
Click to expand...
Click to collapse
I changed the blot to a by ADB command:laugh:
I also need QFIL image ...
me too.........
I can create an image but i'm having problems getting phone recognized by QFIL.
ZiemowitP said:
I can create one but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
trantium said:
Exactly the same. It's completely dead, not visible in the windows device manager or lsusb on linux either.
Click to expand...
Click to collapse
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
ZiemowitP said:
If you turn it off. Press and hold the up volume button then plug in USB... it'll start and hang at the booting screen. Isn't that a way to enter the mode?
Click to expand...
Click to collapse
Nope. When your turn it on, the backlight is dim so you can barely see the boot screen. Still no way to get it recognized on my pc
Any one have any luck with this?
Edl cable to enter in 9008 mode.
edl mode essential ph1
https://youtu.be/FSlqiVcIw34
ZiemowitP said:
I can create an image but i'm having problems getting phone recognized by QFIL.
Click to expand...
Click to collapse
help !can you give the image to me ?my PHONE has been dead to 9008
jackzhu said:
I changed the blot to a by ADB command:laugh:
Click to expand...
Click to collapse
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
stupidis said:
Wait changed slot to a and it bricked your device ??? tell me more please i dont want to do something and get a brick?
Click to expand...
Click to collapse
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Tech_Savvy said:
He probably had an empty slot....so when he switched it didn't have a bootloader on it or something ....I always flash a bts to both slots so it nvr will brick from swapping slots...
Click to expand...
Click to collapse
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
In the dev section there's a thread
stupidis said:
How do you "flash a bts to both slots" LOL feelin Noob again what is BTS?
Click to expand...
Click to collapse
It refers to Back To Stock and the thread is [STOCK][DUMPS][FIRMWARE] Essential stock firmware and rom dumps*.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini

Totally dead

Killed it. Was doing great with aokp. After removing some system apps battery life improved. Flashed a custom rick and morty boot animation. All was right in the world.
But then...
Decided I hate the boot logo. Created an image snd flashed it through my terminal emulator using dd command
Phone shut off and will not reboot into anything. No battery charge light. Windows nor Linux will find it.
Never so sufficiently bricked a phone before.
Any ideas?
I had one. I bought another mini. Would still like to fix this one though.
I bricked my mini when flashing new bootlogo. You can unbrick it in two ways. 1. Using Test-Point 2. Use an Deep-flash Cable.
reticuli said:
I bricked my mini when flashing new bootlogo. You can unbrick it in two ways. 1. Using Test-Point 2. Use an Deep-flash Cable.
Click to expand...
Click to collapse
What you have done is amazing -
to bring your mini back from the dead -
maybe you could write a short procedure post about how to do this as it would really help out others who have also encountered this situation?
k500zm said:
What you have done is amazing -
to bring your mini back from the dead -
maybe you could write a short procedure post about how to do this as it would really help out others who have also encountered this situation?
Click to expand...
Click to collapse
Will do after getting sober! =)
reticuli said:
Will do after getting sober! =)
Click to expand...
Click to collapse
Tell me bout it heheh
reticuli said:
Will do after getting sober! =)
Click to expand...
Click to collapse
If so I'll buy you a beer...unless you mean aa sober then I'll buy you a coffee
reticuli said:
I bricked my mini when flashing new bootlogo. You can unbrick it in two ways. 1. Using Test-Point 2. Use an Deep-flash Cable.
Click to expand...
Click to collapse
Well no luck with deep flash cable. Other than when plugged in to computer charging led lights up. But cannot enter edl.
Thought maybe I got a bad cable but tested it on my new mini and it boots to edl.
Holyoblation said:
Well no luck with deep flash cable. Other than when plugged in to computer charging led lights up. But cannot enter edl.
Thought maybe I got a bad cable but tested it on my new mini and it boots to edl.
Click to expand...
Click to collapse
The only Deep Flash Cable that worked is this one --------> https://www.ebay.com/itm/Deep-Flash...401505148974?_trksid=p2349526.m4383.l4275.c10
Got it to work...the one I have is hit or miss...but after several attempts it worked.
Used the edl tool to full backup my new mini then flashed to the brick..
Thanks

My redmi note 7 is dead , now what should i do?

I was flashing my device
flash is completed
but my mobile didn't reboot
and now my mobile is not turn on
and not charging and i can't turn it on fastboot
what's wrong with my mobile?
please anyone explain??
i need help
c1w3xx said:
I was flashing my device
flash is completed
but my mobile didn't reboot
and now my mobile is not turn on
and not charging and i can't turn it on fastboot
what's wrong with my mobile?
please anyone explain??
i need help
Click to expand...
Click to collapse
very bad, care to share exactly what you did so others don't make the same mistake.
Calm down, explain this in a better way. What did you do, step by step?
I was flashing Global rom
Kafei said:
Calm down, explain this in a better way. What did you do, step by step?
Click to expand...
Click to collapse
That time i was flashing my mobile
for unroot
Now i tell you how it's brick
1. First I turn it on at fastboot
2. I downloaded Global version Rom for flash
3. Open MI flashtool For flash my mobile
4. All is completed
5. Mobile Turned Off
6. NOw it's still of not turn it on
7. Then i try to open fastboot again
8. but it's not running
I think it is bricked
Now how can i unbrick it?
(Sorry For my typeing... I'm week at English)
Did you flash the correct rom? When you plug USB to pc, does it detect anything at all? Does it had enough battery when you were flashing it?
agenius5 said:
Did you flash the correct rom? When you plug USB to pc, does it detect anything at all? Does it had enough battery when you were flashing it?
Click to expand...
Click to collapse
Yes, i did flash the correct rom
Now when i plug USB to pc, it detect Qualcomm HS-USB QDLoader 9008 at Computer Device manager.
Yes It has 50% more battery .
I think it is bricked :'(
Try test point method. I know its dangerous but it works.

			
				
mayukh2000 said:
Try test point method. I know its dangerous but it works.
Click to expand...
Click to collapse
Can i flash my mobile with test poin method??
rickyreyne said:
Youtube
Click to expand...
Click to collapse
Is that work perfectly?
c1w3xx said:
Is that work perfectly?
Click to expand...
Click to collapse
Ya that works.
c1w3xx said:
Is that work perfectly?
Click to expand...
Click to collapse
Sure
I also have a Dead phone. I woke up in the morning late because my alarm didnt go off and found my phone wouldnt turn on. I couldnt even boot to recovery. The charge light no longer comes on either. Would anyone know a fix? Is there a diode or a capacitor that can be replaced?
i flash my phone in same situation and i try with test pointe but nothing work help
Phone is probably in EDL mode, try reflashing with MiFlash again

Categories

Resources