I was flashing my device
flash is completed
but my mobile didn't reboot
and now my mobile is not turn on
and not charging and i can't turn it on fastboot
what's wrong with my mobile?
please anyone explain??
i need help
c1w3xx said:
I was flashing my device
flash is completed
but my mobile didn't reboot
and now my mobile is not turn on
and not charging and i can't turn it on fastboot
what's wrong with my mobile?
please anyone explain??
i need help
Click to expand...
Click to collapse
very bad, care to share exactly what you did so others don't make the same mistake.
Calm down, explain this in a better way. What did you do, step by step?
I was flashing Global rom
Kafei said:
Calm down, explain this in a better way. What did you do, step by step?
Click to expand...
Click to collapse
That time i was flashing my mobile
for unroot
Now i tell you how it's brick
1. First I turn it on at fastboot
2. I downloaded Global version Rom for flash
3. Open MI flashtool For flash my mobile
4. All is completed
5. Mobile Turned Off
6. NOw it's still of not turn it on
7. Then i try to open fastboot again
8. but it's not running
I think it is bricked
Now how can i unbrick it?
(Sorry For my typeing... I'm week at English)
Did you flash the correct rom? When you plug USB to pc, does it detect anything at all? Does it had enough battery when you were flashing it?
agenius5 said:
Did you flash the correct rom? When you plug USB to pc, does it detect anything at all? Does it had enough battery when you were flashing it?
Click to expand...
Click to collapse
Yes, i did flash the correct rom
Now when i plug USB to pc, it detect Qualcomm HS-USB QDLoader 9008 at Computer Device manager.
Yes It has 50% more battery .
I think it is bricked :'(
Try test point method. I know its dangerous but it works.
mayukh2000 said:
Try test point method. I know its dangerous but it works.
Click to expand...
Click to collapse
Can i flash my mobile with test poin method??
rickyreyne said:
Youtube
Click to expand...
Click to collapse
Is that work perfectly?
c1w3xx said:
Is that work perfectly?
Click to expand...
Click to collapse
Ya that works.
c1w3xx said:
Is that work perfectly?
Click to expand...
Click to collapse
Sure
I also have a Dead phone. I woke up in the morning late because my alarm didnt go off and found my phone wouldnt turn on. I couldnt even boot to recovery. The charge light no longer comes on either. Would anyone know a fix? Is there a diode or a capacitor that can be replaced?
i flash my phone in same situation and i try with test pointe but nothing work help
Phone is probably in EDL mode, try reflashing with MiFlash again
Related
Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
chure63 said:
Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
Click to expand...
Click to collapse
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
RossFixxed said:
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
Click to expand...
Click to collapse
The battery is OK, I tested it already with another phone. The LED doesn't turn on when the charger is plugged in. When I try to enter to recovery it vibrates but nothing else happens (Black Screen).
Lennyz1988 said:
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
Click to expand...
Click to collapse
The screen would cause no sound, no LED light, no download or recovery mode, etc..?
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
HassanM said:
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
Click to expand...
Click to collapse
Where should I post this? Thank you.
chure63 said:
Where should I post this? Thank you.
Click to expand...
Click to collapse
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
erikasnoske said:
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
Click to expand...
Click to collapse
I can't get into download or recovery mode.
chure63 said:
I can't get into download or recovery mode.
Click to expand...
Click to collapse
oh god, I didn't have this experience, sorry, I can't help you at all then
Jtag
Jtag?
jd1639 said:
Jtag
Click to expand...
Click to collapse
Hiya I found as a bit of a n00b Jtag painful as a senior member would there be a guide that we could learn from? I wasn't able to find one.:fingers-crossed:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
jd1639 said:
Jtag
Click to expand...
Click to collapse
I don't know much about it. Which box will be helpful to debrick it? Thanks.
chure63 said:
I don't know much about it. Which box will be helpful to debrick it? Thanks.
Click to expand...
Click to collapse
Google mobiletechvideos
Sent from my Nexus 5 using xda app-developers app
95mediatech said:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
Click to expand...
Click to collapse
I'm not in the US....
chure63 said:
I'm not in the US....
Click to expand...
Click to collapse
You don't have to be in the US, it's just going to cost you more in shipping. Maybe you can find someone in your country that can jtag. Try some of the local phone repair shops.
Sent from my Nexus 5 using xda app-developers app
Have you tryed it?
http://forum.xda-developers.com/showthread.php?t=2265477
At the bottom there are some information "how to revive bricked device". Have you tryed it?
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
vegetaleb said:
I was chasing for E9+ information and reviews and found this page that looks like a way to unbrick Mediatek based HTC phones (M9+, E9+...)
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.muzisoft.com/shuaji/100236.html&prev=search
Click to expand...
Click to collapse
thanx alot for ur reply.. but this is tutorial for flashing M9+.. i really checked before...
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
What exactly steps did you do to brick?
iElvis said:
What exactly did you do to it?
When you plug it into your PC, what do you see in Device Manager?
Click to expand...
Click to collapse
simonbigwave said:
What exactly steps did you do to brick?
Click to expand...
Click to collapse
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
t-mobile_mda said:
i used the partial flash file via SPFlashTool.. (device was rebooting on the bootloader mode) after successfully flashing device is not power on.. only vibrating.. pc detects the device Preloader USB Device..
Click to expand...
Click to collapse
device is not restarting the driver second time as Preloader Device...
You will probably have better luck posting in the M9+ forum. I have never heard of this flash tool, but the dedicated xda thread for it seems to be full of bricks.
From the sound of it, you either flashed the wrong file or flashed the right file to the wrong place.
Just curious if the pc detects the device will an RUU detect it?
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
Usually something like "USB Preloader Device" means a low-level brick because the PC can't tell what it is. For a RUU to work, it has to be detectable by ADB, not just Device Manager.
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
bigp951 said:
Would putting the RUU on the sdcard make any difference? I am still new to htc.
On my samsung I hard bricked once and recovered by putting a bin file on my sd card. There is an app called partition backup on play store that allows someone to make such file. Would that work? I think someone could make a backup and then post it.
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=en
Click to expand...
Click to collapse
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
That flash tool seems scary to me... Sorry for not adding any advice!
TwinAdk said:
That flash tool seems scary to me...
Click to expand...
Click to collapse
I had the same thought, especially given the number of bricks reported in the thread.
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
A hardware un bricking tool (sure there used to be a tool for htc devices xtc was it? Could be wrong?) or RMA seems to be your only options now.
Obviously try the holding all buttons and waiting for the vibrate method then try to get to bootloader mode. If that fails I'd be aiming to get it replaced, good news is if it is totally bricked, chances are HTC will just think the bootloader went on you.
bigp951 said:
Just curious if the pc detects the device will an RUU detect it?
Click to expand...
Click to collapse
hi..
as i say above pc detects the device..preloader or mtk usbvcom... and only SDcard flashing possible.. not exist RUU..
0PK7IMG.zip
iElvis said:
Not knowing what state he put it in, it's hard to say. Worth a try.
But if the bootloader is corrupted, the phone will never get to the point of reading the sdcard.
Click to expand...
Click to collapse
really i tried all methods while it has rebooting the bootlaoder screen..i flashed the device with this tool finally..and totally dead..
TwinAdk said:
That flash tool seems scary to me... Sorry for not adding any advice!
Click to expand...
Click to collapse
iElvis said:
I had the same thought, especially given the number of bricks reported in the thread.
Click to expand...
Click to collapse
this flash tool is for MTK 6795 devices which HTC M9+ is one of them.. only these flashloaders accept it's scatter file.. (MT6795_Android_scatter.txt)
SP_Flash_Tool_exe_Windows_v5.1504.00.000
SP_Flash_Tool_exe_Windows_v5.1512.00.000
SP_Flash_Tool_exe_Windows_v5.1516.00.000
SP_Flash_Tool_exe_Windows_v5.1520.00.000
t-mobile_mda said:
hi all..
device is totally dead.. no bootloader mode..no recovery mode or anything..device is dead by wrong flash with flash tool.. after flashing device is only vibrates.. any idea guys..?
pls check my previous post..
http://forum.xda-developers.com/android/help/unbrick-mt6795-cpu-t3140764/post61480989#post61480989
tia..
Click to expand...
Click to collapse
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
özkan72 said:
Hello, do you wonder if the device is for me the m9 plus vibration was just a brick in any com port
Click to expand...
Click to collapse
hi..
u mean u r on the same condition.? only vibrates and detects com port as Preloader..?
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Can you enter fastboot mode?
No
varben said:
Can you enter fastboot mode?
Click to expand...
Click to collapse
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
You are in Diagnostics mode, it's pretty useless, you need to enter in EDL Mode and try a flash with MiFlashTool
Use "fastboot oem edl"
I don't know if your phone can receive fastboot commands in Diagnostics, just try...
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Alanjameson99 said:
Can you please elaborate what have you done prior to the device brick? An informative answer requires an informative question.
Click to expand...
Click to collapse
I tried to install super su from boooting twrp !
Anantha47 said:
No i cant get into fastboot mode
I tried connecting to miflash application and pressed volume down + power the boot logo showed for a second and vanished does that mean i have hope?
Click to expand...
Click to collapse
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
varben said:
What about keeping power and volume +/- pressed together for at least 10 seconds?
Too, connect the charger, maybe the battery is drained.
At least try these simple things before moving to complicated ones.
Click to expand...
Click to collapse
im 100% sure battery is above 70
Anantha47 said:
im 100% sure battery is above 70
Click to expand...
Click to collapse
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
varben said:
Another thing to try is this, connect your phone with your computer and run
adb reboot edl
You will not see anything in your phone, just black screen.
Open miflash tool and hit refresh. See if it recognizes the phone.
Click to expand...
Click to collapse
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Anantha47 said:
Already tried that mate it's showing either "sahara read end error with status 9" or "object reference not set to an instance of an object" the thing is I cant go into fast boot mode adb isn't recognising my device or even fastboot
Click to expand...
Click to collapse
At least mi flash is recognizing the phone.
You can try with a different firmware, try with android 7 firmware.
P.s. now that I see better your phone is recognized as Qualcomm HS-USB Diagnostics 900E, it should be 9008
You should try to find the correct Qualcomm drivers...
I'm sorry you have to go through this.
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Anantha47 said:
Can you please tell me or give m link for Qualcomm drivers I messed up drivers in the process
Click to expand...
Click to collapse
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
varben said:
Check this:
http://www.99mediasector.com/install-qualcomm-hs-usb-qdloader-9008-install/
Click to expand...
Click to collapse
I couldn't install those drivers it says windows need 64 bit drivers
om_latex said:
Bro this guy was having same issue as 900E mode...so refer to this post and do step by step procedure shown in video.
im sure u will recover ur phone 100% to normal mode.:good:
good luck.
https://forum.xda-developers.com/showpost.php?p=75750138&postcount=5
and plz let me know...
Click to expand...
Click to collapse
There is a major diff in vid and for me! he has working fastboot and i dont so i cant use EDL too but thanks for suggesting
Anantha47 said:
I couldn't install those drivers it says windows need 64 bit drivers
Click to expand...
Click to collapse
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
varben said:
Ok, try these:
https://www.dropbox.com/s/a3i7aqkwjonkwmu/QDLoader HS-USB Driver.7z?dl=0
Click to expand...
Click to collapse
Thank you for your continuous support mate but my device is not listed in either adb or fastboot commands , hence that the method suggested my on_Latex is not going to work :'(
Anantha47 said:
Guys I just hard bricked my MIA1 I think trying to install superSu! can anyone please tell me what are my options? the phone is literally dead the adb command line is not finding the phone no boot logo no lights in device manager just detects this as Qcom device. Please,Ii need help
Click to expand...
Click to collapse
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
SrikanthMergu said:
connect your mobile to pc using usb cable and try pressing volume down and power button( or just press all three vol+ ,vol- and powerbutton ) untill it gets to fastboot mode
at last you will go to fastboot
i tried the same thing when i was in the same situation it worked for me
let me know is it working for you or not
Click to expand...
Click to collapse
That's the thing i cant get into fast boot! the screen turns on white mi logo appears and then goes black after i press vol down + power
I have a TA-1033 version and a deep flash engerneering cable but im stuck of how to unbrick, my device is detected as QDLoader 9008, also if i try to flash using NOST i get "polling USB device" then a "DEVICE_NOT_CONFIGURE" its an 0x4000 error
if anyone can help me out that would be great!
Sent from my AGS_W09
I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.
DoggyStar said:
I have same problem. I don't know what i do, but seems to when i charge my phone over 80 %.
Then i get it download mode and i change edl cable to regular usb cable and then fastboot reconise my phone and i can flash it succesfull.
Click to expand...
Click to collapse
Its completely dead, only detected as QHSUSB BULK and like i said i got one of those deep flash cables from shenzen
When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.
DoggyStar said:
When you but it on, can you see android text or just "you phone is unlocked text"?
My phone only shows that unlock text, but after I use edl cable i can get android text showing up.
Click to expand...
Click to collapse
No mine just doesnt vibrate or anything
And you have full battery?
DoggyStar said:
And you have full battery?
Click to expand...
Click to collapse
I dont know because its dead as in it wont show any signs of life
Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.
DoggyStar said:
Yes yes, but put it ac charger for 2-3 hours and see if you then see something or can you then get it fastboot mode.
My phone has low battery but when I charge it, fastboot start working magically.
Click to expand...
Click to collapse
I modified my aboot.img because i thought i could downgrade but that killed my device
mattwhite7102 said:
I modified my aboot.img because i thought i could downgrade but that killed my device
Click to expand...
Click to collapse
Does qpst tool worked for you?
Emmykay223 said:
Does qpst tool worked for you?
Click to expand...
Click to collapse
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!
mattwhite7102 said:
Nope, i dont have the files for QPST, but i do have the qfil files and one of those deep flash cables, if you can get my phone fixed i will respect you forever!
Click to expand...
Click to collapse
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here
Emmykay223 said:
No no i don't want that , if i could help you surely i will .. download qpst tool and Qualcomm drivers on your pc or laptop , if you did all the things and nothing happened yet, so why you don't try this too? We never know which things could give us better results. Hope for the best ??
https://www.qpstflash.com
Download qpst from here
Click to expand...
Click to collapse
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...
mattwhite7102 said:
Well i downloaded the 2.7.453 of qpst and flashing with qfil gives me SAHARA_NAK_MEMORY_DEBUG_NOT_SUPPORTED though whats strange is different versions of qfil gives me different errors...
Click to expand...
Click to collapse
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
It does get detected by qpst, might be a driver issue
Emmykay223 said:
Does it able to be detected by qpst.
And did you install Qualcomm drivers?
Just look at this .
Hope all of your problems would clear
Click to expand...
Click to collapse
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"
mattwhite7102 said:
Nope tried it but coming up with "unable to download flash programmer with sahara protocol"
Click to expand...
Click to collapse
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work
Emmykay223 said:
Download another android flash zip files from here, 8.0 or 9.0 directly hope it would work
Click to expand...
Click to collapse
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!
mattwhite7102 said:
Can you link me for the TA-1033? its gotta be qfil because my phone doesnt show any signs of life!
Click to expand...
Click to collapse
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/
Emmykay223 said:
https://www.google.com/amp/s/forum....-6/help/nokia-6-ota-update-ddls-t3721424/amp/
Click to expand...
Click to collapse
I cant install these because my phone gets detcted as QHSUSB BULK
Hi all,
So basically I was trying to install Pixelexperience to my Note 7 today and I messed it up big time. So I was having some issues with TWRP and one of the solutions (according to posts I found on Google) was to update the phone firmware. So I went to do that. Downloaded the lavander firmware for my Note 7, put it in the folder with other stuff I was downloading. One of these was firmware for Redmi A5 (which I didn't notice) and ended up flashing that. Now my phones screen is dead (I guess the rest of it also?). When I plug it in to PC the PC produces the sounds that something connected but running fastbood / adb devices doesn't return anything. I tried multiple times booting to fastboot / recovery but I have no idea when the phone is on or off. So it just produces sound on PC that it disconnected and connected like 1 second after but nothing still shows up on fastboot.
Did anyone had similiar issue and is there anything I can do? Or should I go look for a new phone?
Thank you for your time
Try to flash the whole rom again.
VD171 said:
Try to flash the whole rom again.
Click to expand...
Click to collapse
Well, I thought about that, but I don't know how to flash it since it seems I can't boot into fastboot. I've tried countless times and failed every time
vivida said:
Well, I thought about that, but I don't know how to flash it since it seems I can't boot into fastboot. I've tried countless times and failed every time
Click to expand...
Click to collapse
Try any tool:
Xiaomitool: https://www.xiaomitool.com/V2/Miflashpro: https://miflashpro.com/Miflashtool: https://xiaomiflashtool.com/
VD171 said:
Try any tool:
Xiaomitool: https://www.xiaomitool.com/V2/Miflashpro: https://miflashpro.com/Miflashtool: https://xiaomiflashtool.comI have tried but I just can't get the devices to boot into fastboot and I have no idea in what state it is since the screen doesn't show anything
Click to expand...
Click to collapse
Can you enter in recovery ?
VD171 said:
Can you enter in recovery ?
Click to expand...
Click to collapse
No, the same thing is happening. I just get the sound on PC and that's about it. It isn't recognized by the PC or any software that I tried to use
Try to get new cable and it will work
Eslamloka said:
Try to get new cable and it will work
Click to expand...
Click to collapse
After that's make your phone in edl mode then flash stock miui with miflash tool
Eslamloka said:
After that's make your phone in edl mode then flash stock miui with miflash tool
Click to expand...
Click to collapse
I receive cannot receive hello packet error message now
vivida said:
I receive cannot receive hello packet error message now
Click to expand...
Click to collapse
Sorry but i can't understand,,,is u tried to change a cable and it's working or not
Eslamloka said:
Sorry but i can't understand,,,is u tried to change a cable and it's working or not
Click to expand...
Click to collapse
I tried changing it but it doesn't work. The problem is I can't flash anything on MiFlash because it requires something like technicians account
vivida said:
I tried changing it but it doesn't work. The problem is I can't flash anything on MiFlash because it requires something like technicians account
Click to expand...
Click to collapse
before miflash firstly you must connect your phone with pc or laptop