[q] got stuck on fasteboot mode, help! - G2 Q&A, Help & Troubleshooting

i dont know what to do
i just flashed this rome into my G2:
http://forum.xda-developers.com/lg-g2/development/rom-cloudyg2-t3006744
the problem is that my phone is D802 so i flashed the wrong rome :crying::crying::crying:
now my phone stuck on FASTEBOOT MODE
i cant get into recovery mode or download mode, i just dont know what to do!
Now i stuck on security error and the device on loop
Also, the pc isnt reconizing the phone

halotzi said:
i dont know what to do
i just flashed this rome into my G2:
http://forum.xda-developers.com/lg-g2/development/rom-cloudyg2-t3006744
the problem is that my phone is D802 so i flashed the wrong rome :crying::crying::crying:
now my phone stuck on FASTEBOOT MODE
i cant get into recovery mode or download mode, i just dont know what to do!
I'm desperate, i want to cry becouse i just fixed it!
What can I do?? pleaseeee help me!!:crying:
Click to expand...
Click to collapse
Calm down son, just follow this guide by bender http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
Fastboots not that bad of a place to be

Art Vanderlay said:
Calm down son, just follow this guide by bender http://forum.xda-developers.com/lg-g2/help/fixing-fastboot-mode-started-t2930963
Fastboots not that bad of a place to be
Click to expand...
Click to collapse
I dont really understand what needs to be done
I dont know what is my imei, iis a really big problem
I just need to run RUN_THIS.bat?

halotzi said:
I dont really understand what needs to be done
I dont know what is my imei, iis a really big problem
I just need to run RUN_THIS.bat?
Click to expand...
Click to collapse
Show me your software information, I'll dump the partitions and link them to you.
Then you put them in the folder with all the adb stuff.
Then you connect your phone and run the batch file

Art Vanderlay said:
Show me your software information, I'll dump the partitions and link them to you.
Then you put them in the folder with all the adb stuff.
Then you connect your phone and run the batch file
Click to expand...
Click to collapse
I have LG G2 32GB D802
It's enough or you need more information?

halotzi said:
I have LG G2 32GB D802
It's enough or you need more information?
Click to expand...
Click to collapse
That's fine. I'll have them ready for you tomorrow. Its 12 am here already

Art Vanderlay said:
That's fine. I'll have them ready for you tomorrow. Its 12 am here already
Click to expand...
Click to collapse
OK! Thank you very much! But please dont forget
IMPORTANT:
The computer does not reconize myG2 even there is a sound from the computer when i connect him
this is writing on my device when i connect:
-reset-
-portchange-
-reset-
-portchange-
stall get_descriptor 128 6 1536 0 10
fasteboot: proocessing commands
Click to expand...
Click to collapse

halotzi said:
OK! Thank you very much! But please dont forget
IMPORTANT:
The computer does not reconize myG2 even there is a sound from the computer when i connect him
this is writing on my device when i connect:
Click to expand...
Click to collapse
Try installing pdanet if your phone isn't recognised. It'll install the adb drivers for you.
Here are the 3 files. Just put them in the put_files_here folder and run the batch file. After it's all done you can boot into download mode and flash back to stock
https://www.dropbox.com/s/9p2gu9643ll6del/aboot_229376.bin?dl=0
https://www.dropbox.com/s/3cse678pqjbfww6/boot_262144.bin?dl=0
https://www.dropbox.com/s/zzbrhzzznzcpkm4/laf_589824.bin?dl=0

Art Vanderlay said:
Try installing ]
Click to expand...
Click to collapse
I need to connect the phone into the computer before i install pdanet? Or install pdanet and then connect the phone?
Becouse i connected the phone into the computer and then I started the install but it is on "Updating PdaNet on your phone" for 10 minutes
So i instelled the files and its write "scourty error", what to do??? (ןi cant get into download mode and recovery)

halotzi said:
I need to connect the phone into the computer before i install pdanet? Or install pdanet and then connect the phone?
Becouse i connected the phone into the computer and then I started the install but it is on "Updating PdaNet on your phone" for 10 minutes
So i instelled the files and its write "scourty error", what to do??? (ןi cant get into download mode and recovery)
Click to expand...
Click to collapse
Make sure your phones fully powered off. Hold the power button for about 10 seconds. And then try putting it in download mode

Art Vanderlay said:
Make sure your phones fully powered off. Hold the power button for about 10 seconds. And then try putting it in download mode
Click to expand...
Click to collapse
I tried it, i cant reach safe or recovery mode...
Sorry for the late replay, I sent the phone to a store to fix it but they just broke the screen (and fixed it)
So... what can I do?

UP

UP

UPPPPP

Art Vanderlay said:
Make sure your phones fully powered off. Hold the power button for about 10 seconds. And then try putting it in download mode
Click to expand...
Click to collapse
i cant get into download mode or recovery, nothing
The PC isnt reconizing the phone at all

halotzi said:
i cant get into download mode or recovery, nothing
The PC isnt reconizing the phone at all
Click to expand...
Click to collapse
Send me your teamviewer password. I'll have to have a look at this.
Also, download a kdz and follow this guide up to step 6. Make sure you have these ready

Art Vanderlay said:
Send me your teamviewer password. I'll have to have a look at this.
Also, download a kdz and follow this guide up to step 6. Make sure you have these ready
Click to expand...
Click to collapse
Where is the guide?
I live in israel so we have diffrent hours but i will stay up for every hour you would say
Do you have skype or facebook that we would chat there?

halotzi said:
Where is the guide?
I live in israel so we have diffrent hours but i will stay up for every hour you would say
Do you have skype or facebook that we would chat there?
Click to expand...
Click to collapse
Sorry its over here http://forum.xda-developers.com/showthread.php?t=2666967
Download your kdz from here. http://lg-phone-firmware.com/mobile/index.php?id_mod=36We just want the about, boot and laf out of them. It might take some time to download, just let me know when you finish

Art Vanderlay said:
Sorry its over here http://forum.xda-developers.com/showthread.php?t=2666967
Download your kdz from here. http://lg-phone-firmware.com/mobile/index.php?id_mod=36We just want the about, boot and laf out of them. It might take some time to download, just let me know when you finish
Click to expand...
Click to collapse
I finished the guide and i did everything up to step 6

halotzi said:
I finished the guide and i did everything up to step 6
Click to expand...
Click to collapse
Great. Rename the aboot, boot and laf to aboot.img, laf.img, and boot.img. Now download VMware and slax.
Were going to follow this guide. I have to go to bed now, just familiarise yourself with the guide and send us a pm in the morning

Related

Stuck in TWRP Loop

Can't get the phone to boot on anything other than twrp. I reboot, it goes back to it, I do a recovery, it goes back to it. I can not get my phone to turn on and get past this.
Varking said:
Can't get the phone to boot on anything other than twrp. I reboot, it goes back to it, I do a recovery, it goes back to it. I can not get my phone to turn on and get past this.
Click to expand...
Click to collapse
Did you try this?
http://forum.xda-developers.com/showthread.php?t=2451696
Yes, and that put me in an LG Screen bootloop. I can access adb on my pc but when I try to use the code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img
I get: 'dd' is not recognized as an internal or external command, operable program or batch file.
Semantics said:
Did you try this?
http://forum.xda-developers.com/showthread.php?t=2451696
Click to expand...
Click to collapse
Hi , I've tried the method without adb, after I run the command I get a "no space left on device, 65537+0 records in,65536+0 records out, 32 mb copied."I have about 15gb of internal storage available. I'm new to adb pushing, how do I get my pc to recognize my phone while in twrp? I have the correct drivers installed. Btw I'm on Tmo, flashed the recovery img thru flashify, now stuck in twrp loop. When I go to download mode it automatically shows a screen saying firmware update,don't unplug usb. And on bottom left it says rooted. tried doing a factory reset in twrp, took about 7 min, completed, rebooted, still in twrp loop. would doing an advanced wipe or formatting data help?
The last thing I saw in twrp was a screen asking me to reboot and telling me that I am no longer rooted. I don't even know how this is possible.
I would put your phone in download mode and use the LG Mobile support tool to do a recovery on it.
shaungregg said:
I would put your phone in download mode and use the LG Mobile support tool to do a recovery on it.
Click to expand...
Click to collapse
Where do I get the tool and how to I put the phone in download mode?
Varking said:
Where do I get the tool and how to I put the phone in download mode?
Click to expand...
Click to collapse
Try here http://forum.xda-developers.com/showthread.php?t=2432476
shaungregg said:
Try here http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Thank you all for the help so far. I feel I am making progress to restoring the phone but I have been "installing drivers" for a long time now with them never completing so I am just waiting on that before using all those tools.
shaungregg said:
I would put your phone in download mode and use the LG Mobile support tool to do a recovery on it.
Click to expand...
Click to collapse
whenever i go to download mode it automatically goes to that firmware update screen where it stays on 0 percent.
pmnuon said:
whenever i go to download mode it automatically goes to that firmware update screen where it stays on 0 percent.
Click to expand...
Click to collapse
That is where I am stuck as well. The CDC Serial is not updating for me.
Varking said:
That is where I am stuck as well. The CDC Serial is not updating for me.
Click to expand...
Click to collapse
Got it done! Thank you to everyone who helped me!
Varking said:
Got it done! Thank you to everyone who helped me!
Click to expand...
Click to collapse
varking, please tell me what you did. im still stuck in twrp

[Q] LG G2 won't enter in download mode

Hello, I am trying to get back to stock but for some reason my phone won't boot in download more anymore. It stucks at this step -> see attached photo
Are you connected to a computer or charging we with the cable? Just to cross off one thing.
Sent from my LG-D802 using Tapatalk
waz675 said:
Are you connected to a computer or charging we with the cable? Just to cross off one thing.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
We are in the same situation... if someone can help us
http://forum.xda-developers.com/show....php?t=2710034
http://forum.xda-developers.com/showthread.php?t=2706225
Thanks
No, the phone was connected to the computer
S0wL said:
No, the phone was connected to the computer
Click to expand...
Click to collapse
if you can go to recovery (custom or stock)
it can help you
Code:
http://forum.xda-developers.com/showthread.php?t=2694530
S0wL said:
No, the phone was connected to the computer
Click to expand...
Click to collapse
Did you install any recovery module like CWM or TWRP on the mobile. I faced the same situation and I was able to recover my phone using TWRD and ADB consoles. I will be able to help you if you have installed any one of these.
Thanks.
ravi.ameer said:
Did you install any recovery module like CWM or TWRP on the mobile. I faced the same situation and I was able to recover my phone using TWRD and ADB consoles. I will be able to help you if you have installed any one of these.
Thanks.
Click to expand...
Click to collapse
I'm in the same situation with TWRP :good:
profesy said:
I'm in the same situation with TWRP :good:
Click to expand...
Click to collapse
Only one question,
Do you have any ROM installed currently or stuck without any rom. Like boot loop and secure boot issue etc.
If you have TWRP at least installed on your device, you may use "adb push xxxx.zip /sdcard/xxxx.zip" command if the device is discoverable in "adb discover" command. You may follow the guide here "http://www.droidviews.com/android-4-4-2-kitkat-rom-on-lg-g2-d802-install-twrp/"
If you are able to boot in X rom you may use this guide to shine yourself in stock rom
"http://forum.xda-developers.com/showthread.php?t=2432476&highlight=remove+root+status"
Thanks!
ravi.ameer said:
Only one question,
Do you have any ROM installed currently or stuck without any rom. Like boot loop and secure boot issue etc.
If you have TWRP at least installed on your device, you may use "adb push xxxx.zip /sdcard/xxxx.zip" command if the device is discoverable in "adb discover" command. You may follow the guide here "http://www.droidviews.com/android-4-4-2-kitkat-rom-on-lg-g2-d802-install-twrp/"
If you are able to boot in X rom you may use this guide to shine yourself in stock rom
"http://forum.xda-developers.com/showthread.php?t=2432476&highlight=remove+root+status"
Thanks!
Click to expand...
Click to collapse
I have recovery and a booting rom, the smartphone it's all ok but don't go in download mode (see image above), and i can't see it with the pc in usb, i can't use this guide because i can't enter in the dowload mode and the pc both donwload mode and normal boot don't see the smartphone
S0wL said:
Hello, I am trying to get back to stock but for some reason my phone won't boot in download more anymore. It stucks at this step -> see attached photo
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?p=51693321#post51693321
I got the same problem and got the download mode after that. Good luck !
profesy said:
I have recovery and a booting rom, the smartphone it's all ok but don't go in download mode (see image above), and i can't see it with the pc in usb, i can't use this guide because i can't enter in the dowload mode and the pc both donwload mode and normal boot don't see the smartphone
Click to expand...
Click to collapse
Firstly you may not go do download mode for flashing factory rom. You can do the same even from recovery. However, the guide in http://forum.xda-developers.com/showthread.php?p=51693321#post51693321 seems working for many. You may give that a try.
Thanks.
Sangoku91 said:
Try this http://forum.xda-developers.com/showthread.php?p=51693321#post51693321
I got the same problem and got the download mode after that. Good luck !
Click to expand...
Click to collapse
Thx to all man, this fix the problem. Many many thx to all
Worked ! Thanks, finally got to stock android.
Hi.I can not go to downloading mod on my lg g2.I tried using v+ and connecting to pc.It goes to charging mod and nothing happen.
As you said I went to recovery mod but there is not any advance selection.
plz help me
did donwload mode work ?
zaker.khafan1 said:
Hi.I can not go to downloading mod on my lg g2.I tried using v+ and connecting to pc.It goes to charging mod and nothing happen.
As you said I went to recovery mod but there is not any advance selection.
plz help me
Click to expand...
Click to collapse
Did u get it work?
I have a similar problem, my sprint G2 says download mode when vol up+ cable, but doesn't go all the way into download mode just the initial screen. And normal boot results in being stuck on LG logo forever.

D802T completely dead, please help

i have a bricked lg g2 d802t after ota update.
phone was recongnised from pc as qhsusb_bulk but after ubuntu method posted here Fix No recovery, download mode.. i think i made a mistake flashing boot partition?
now phone wont turn on, no download mode, recovery mode or anything else, but when connected to pc it shows qhsusb_bulk in the device manager, but the is still off and wont turn on.. do you have idea to fix this problem? please help me
anybody is experiencing the same state as i have? please help..
which partitions did you flash ?
bender_007 said:
which partitions did you flash ?
Click to expand...
Click to collapse
i only followed the instructions here and flashed the provided .img by the way im on official kitkat firmware, the provided .img is for jb right? do you think this can be still fix without going to service center? :crying:
scout1089 said:
i only followed the instructions here and flashed the provided .img by the way im on official kitkat firmware, the provided .img is for jb right? do you think this can be still fix without going to service center? :crying:
Click to expand...
Click to collapse
Flash only aboot, boot, laf. You need the d802T for aus i think.
bender_007 said:
Flash only aboot, boot, laf. You need the d802T for aus i think.
Click to expand...
Click to collapse
how can i do that? because i dont have download mode, nor the phone turns on, pc wont detect or recognize the phone anymore when connected, all i got is qhsusb_bulk in the device manager and no multiple drives shown in my computer like before, also ubuntu wont recognize nor detect it also.. :crying:
Try with knoppix m8.
bender_007 said:
Try with knoppix m8.
Click to expand...
Click to collapse
can you provide the link for the knoppix m8?
so im going to run this instead of ubuntu and follow the same instructions stated on the tutorial mentioned? and only flash the 3 .img aboot, boot, laf? am i right? so im going to extract the kdz in order to get the 3 .img specific to my device?
http://knoppix.net/get.php just the 3. Find your original kdz m8
bender_007 said:
http://knoppix.net/get.php just the 3. Find your original kdz m8
Click to expand...
Click to collapse
im going to extract the D802T kdz and get the 3 .img from it? sorry still a noob and could you please explain and guide me through?
edit: after booting with knoopix, inserted the phone still cant be read.. i found no biggest number and all numbers are the same 1-15, seems it did'nt detect the phone, please help
can someone else who manage to revive their phone help me?
please help
i didnt get it ..
ur pc recognize the device as qhsusb ? or doesnt recognize it at all ?
rotem11 said:
i didnt get it ..
ur pc recognize the device as qhsusb ? or doesnt recognize it at all ?
Click to expand...
Click to collapse
when connected to pc, it displays qhsusb_bulk in the device manager and nothing no multiple drives, the phone does not turn on but i think its on even though the screen looks dead because when i left it for an hour i felt the phone's battery is warm..
try go ubuntu and follow this guide http://forum.xda-developers.com/showthread.php?t=2681089
maozer said:
try go ubuntu and follow this guide http://forum.xda-developers.com/showthread.php?t=2681089
Click to expand...
Click to collapse
already did ubuntu wont detect the phone
can u try ubuntu with vmware?
maozer said:
can u try ubuntu with vmware?
Click to expand...
Click to collapse
im using the usb method, if the usb method didnt detect the phone so i guess the vmware wont too?
also tried knoppix it wont detect the phone's partition
well i had the exact same problem u have.. you can look at my previous posts..
i dont know why but it worked for me with vmware.. and in ur situation it worth a shoot.
one of the Initial Symptoms are qhsusb.. try it and let me know..
maozer said:
well i had the exact same problem u have.. you can look at my previous posts..
i dont know why but it worked for me with vmware.. and in ur situation it worth a shoot.
one of the Initial Symptoms are qhsusb.. try it and let me know..
Click to expand...
Click to collapse
okey i'll give it a shoot.. thank you

plz help my phone not booting

hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me
Y4HY4 said:
hi i installed wrong rom on my verizon s5 . it 's doesn't booting plz help me
Click to expand...
Click to collapse
Can you get to download mode?
Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
no i can't my device is stopped working
Pull your battery and leave it out for at least ten minutes and try to get to download mode again.
Tulsadiver said:
Can you get to download mode?
Click to expand...
Click to collapse
Tulsadiver said:
Pull your battery and leave it out for at least ten minutes and try to get to download mode again.
Click to expand...
Click to collapse
the result is same . it's not working !
Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Y4HY4 said:
the result is same . it's not working !
Click to expand...
Click to collapse
Try pulling the battery and plug it into your computer with the OEM data cable. Wait for 10 minutes and try to start the phone without the battery. If it works, it's a damaged or low battery.
If it doesn't, see if it will hook up to Kies 3 to repair.
Last resort is call the manufacturer to see if they can help.
Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
i will try this. will it work ?
It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?
Tulsadiver said:
Here is one more thing you can try. Download this debrick IMG and follow these instructions.
1) I took the file you gave me and renamed it .img
2) Used Win32DiskImager to burn the image onto my SD card.
3) Held Vol Down + Power + Home and download mode launched.
https://www.dropbox.com/s/zdyoje0rw982lk3/Unbrick_IMG.gz?dl=0
Click to expand...
Click to collapse
Tulsadiver said:
It depends on your type of hard brick. Does your computer see anything at all when connected? Maybe something like QHSUSB_BULK?
Click to expand...
Click to collapse
it doesn't working sorry
It probably won't work but you don't have anything to lose trying.
Tulsadiver said:
It probably won't work but you don't have anything to lose trying.
Click to expand...
Click to collapse
will usb jig work on my phone?
Be worth a try.
Tulsadiver said:
Be worth a try.
Click to expand...
Click to collapse
ok . Thnx for u r support . i will try jig tomorrow
hi i tried to usb jig and it doesn't work plz help my phone is hard bricked
Y4HY4 said:
hi i tried to usb jig and it doesn't work plz help my phone is hard bricked
Click to expand...
Click to collapse
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.
Tulsadiver said:
Dang. Hate to hear it. Try one last time to connect your phone yo the computer. Look under "computer" and "device manager" and see if you can see it. If nothing shows up, JTAG or trying to get it replaced by warranty is probably your only options. I had a hard bricked S4 that they replaced.
Click to expand...
Click to collapse
I left my phone to service. he will do JTAG repair on my phone if i am lucky

lg g2 super bricked please hellllp :(

hello boys and girl,
right ive super bricked my lg g2 802 16gb
when i plug it into my win 10 pc it says unkown usb device (device discripter request failed)
before hand i tryed the usbbulk mode but messd it up and now this is all it shows under device manager
in the strart of all these problems i flashed cm13 on a old cm12 twerp recovery and installed wrong gapps made it to recovery but messed it up some how
the phone dosent turn on just has a black screen and says what i said above when connect to usb
please please help love my lgg2 many thanks in advance and merry christmas.dan
First thing use win7 or Ubuntu .
Next what happen when u plug it into PC and what u see in dovice manager?
amin44 said:
First thing use win7 or Ubuntu .
Next what happen when u plug it into PC and what u see in dovice manager?
Click to expand...
Click to collapse
tryed that nothing also nothing in dwvice manger all it does is turns on goes to lg logo and download mode jjust wont pick up on computers also trywd diffrent cables and shorting the compasitors please help x
mr 911 said:
tryed that nothing also nothing in dwvice manger all it does is turns on goes to lg logo and download mode jjust wont pick up on computers also trywd diffrent cables and shorting the compasitors please help x
Click to expand...
Click to collapse
Try the srk tool. It can fix qhs_usb bulkmode.
my friend it wont pick up my phone no drivers install in download mode or when it
Art Vanderlay said:
Try the srk tool. It can fix qhs_usb bulkmode.
Click to expand...
Click to collapse
no drivers install when its in dowwnloas mode under windows 10 or ubunti it charges fine but no drivers install tryed loads of cables i must be first peeson with this problem
mr 911 said:
no drivers install when its in dowwnloas mode under windows 10 or ubunti it charges fine but no drivers install tryed loads of cables i must be first peeson with this problem
Click to expand...
Click to collapse
First person with that problem :laugh:
Sorry but that really gave me a giggle. That's what I think when my drivers won't install. Drivers are a headache, you need a lot of patience with this.
Go to the back to stock thread and download the LGUnitedmobile drivers.
Install them and then try connecting in download mode again.
It doesn't always work straight away, keep trying until windows accepts them.
The fact that your phone is charging is a good sign. Good luck
Art Vanderlay said:
First person with that problem :laugh:
Sorry but that really gave me a giggle. That's what I think when my drivers won't install. Drivers are a headache, you need a lot of patience with this.
Go to the back to stock thread and download the LGUnitedmobile drivers.
Install them and then try connecting in download mode again.
It doesn't always work straight away, keep trying until windows accepts them.
The fact that your phone is charging is a good sign. Good luck
Click to expand...
Click to collapse
it was picking up the lg in bulk usb mode but i tryed the flash trick with the tot file i think i flashed the wrong tot file now all i get is download mode hard factory reset and the phone boots to lg screen then flashes diffrent colors like it loading into android then pure black screen ive tryed so many drivers kushes driver lgunited standard lg drivers nothing at all windows 10 ubunti diffrent cables for days lol man i need ur help i just need my deivers to install i love this lg thaanks for ur help so far mate im dan too.
mr 911 said:
it was picking up the lg in bulk usb mode but i tryed the flash trick with the tot file i think i flashed the wrong tot file now all i get is download mode hard factory reset and the phone boots to lg screen then flashes diffrent colors like it loading into android then pure black screen ive tryed so many drivers kushes driver lgunited standard lg drivers nothing at all windows 10 ubunti diffrent cables for days lol man i need ur help i just need my deivers to install i love this lg thaanks for ur help so far mate im dan too.
Click to expand...
Click to collapse
Have you tried pdanet drivers? They work well.
You need to delete the lg drivers from device manager.
Then install pdanet and reboot your pc.
Try connecting that way.
Art Vanderlay said:
Have you tried pdanet drivers? They work well.
You need to delete the lg drivers from device manager.
Then install pdanet and reboot your pc.
Try connecting that way.
Click to expand...
Click to collapse
i will try now thank you mate.
Art Vanderlay said:
Have you tried pdanet drivers? They work well.
You need to delete the lg drivers from device manager.
Then install pdanet and reboot your pc.
Try connecting that way.
Click to expand...
Click to collapse
hey just tryed all of that just says please connect usb device dosent pick up the lg at all in device manageer or the pda net software really winding me up now just want my beloved lg back been 2 weeks
mr 911 said:
hey just tryed all of that just says please connect usb device dosent pick up the lg at all in device manageer or the pda net software really winding me up now just want my beloved lg back been 2 weeks
Click to expand...
Click to collapse
Damn. Alright you said before that you tried connecting to ubuntu.
Is that giving you anything?
You need to boot to that black screen before you try that. Download mode is not for linux.
ill try that now im looseing hope man
Art Vanderlay said:
Damn. Alright you said before that you tried connecting to ubuntu.
Is that giving you anything?
You need to boot to that black screen before you try that. Download mode is not for linux.
Click to expand...
Click to collapse
nope picks up my other phone in ubunti and android pda.net drivers i have it on black screen and nothing just charging off all my cables god what do i do now
mr 911 said:
nope picks up my other phone in ubunti and android pda.net drivers i have it on black screen and nothing just charging off all my cables god what do i do now
Click to expand...
Click to collapse
When your in ubuntu open a terminal and run
Code:
ls /dev/sd*
Nothing comes up?
nothing just a new type line
thank you for all ur help god if u can get my phone showing up ill buy u quite a few beers through paypal
mr 911 said:
nothing just a new type line
thank you for all ur help god if u can get my phone showing up ill buy u quite a few beers through paypal
Click to expand...
Click to collapse
Even if it doesn't pick up your phone it should return something like this:
/dev/sda /dev/sda1 etc.
Nothing like that?
I love beers but you don't have to do that. If we can get this fixed I'll be happy.
Art Vanderlay said:
Even if it doesn't pick up your phone it should return something like this:
/dev/sda /dev/sda1 etc.
Nothing like that?
I love beers but you don't have to do that. If we can get this fixed I'll be happy.
Click to expand...
Click to collapse
beers it is then , ill give it another go mate.
Art Vanderlay said:
Even if it doesn't pick up your phone it should return something like this:
/dev/sda /dev/sda1 etc.
Nothing like that?
I love beers but you don't have to do that. If we can get this fixed I'll be happy.
Click to expand...
Click to collapse
all it says after your comands is
/dev/sda
Did u try this http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
If not work please install lg driver in windows 7 pc then plug phone in download mode and take screenshote for dovice manager and put it her then try to boot it and again take another screenshote
I think he might have to do that. If ubuntu doesn't mount his phone then there's a problem.
It's late now and I'm going to bed. Best of luck Dan.

Categories

Resources