[HELP]My phone is bricked... Am I screwed ? - Galaxy Note GT-N7000 General

I've made a HUGE mistake... I wanted to flash Abysskernel over RocketRom V4 to make a full wipe. But I've done it to fast, without looking good at what I was doing.
I've flashed CYANOGENMOD 9... And flashing has stuck. Now, I can't start my phone. No more recovery, no more download mode !!!
I think I'm screwed.
Is there a little chance to repear it without SAV ?
Thank you.

you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel

Try usb jig
Sent from my GT-N7000 using xda premium

musashiro said:
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Click to expand...
Click to collapse
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(

zepretender said:
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
Click to expand...
Click to collapse
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.

gee2012 said:
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
Click to expand...
Click to collapse
No download mode... Nothing. Full black screen.

Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom

bhasg1007 said:
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
Click to expand...
Click to collapse
What is "16gb pit file" ??

if its totally black and you cant turn it on, you are lucky if you still have the warranty.. they cant check the flash counter...
just tell them you suddenly cant open the phone

Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/

alexdumitru said:
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
Click to expand...
Click to collapse
I can't reach Download Mode :'(
Totally black screen.
I hope that musashiro is right.

hi
i have got the same problem.
alexdumitru your problem is not same. the link you shared they mention to solve softbrick devices. but me and zepretender got a hardbrick devices. it means you can not go to download mode. so i think only they solve it with changing mainboard or damaged parts.
is there any other new ways for solve hard brick devices??

That's a hard brick too. The emmc is damaged, though it enters download mode, it's true. But I've seen cases where the device entered download mode, though the screen remained blank. So try to enter download mode, even if the screen is still blank and then connect it to the computer. If Odin recognizes it, you might be lucky.

i´ve sufferd the same problem. i´ve bricked my note - no recovery, no download mode. i tried to go to download mode, but odin didn´t recognized usb connection. My phone was dead. I´ve sent my device to samsung for warranty repair.

Hmm I didn't know that.actually I hv tried everythng but odin didn't recgnse it. I will try your suggest ofcourse.its worth to try. So whle usb cble connected should I try to go to download mode? In some topics they mentioning about use another usb cable.which is dfferent than normal ones. Do u know anythng about it?

Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.

quarkw said:
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
Click to expand...
Click to collapse
If your phone is "superbricked" hard brick, then a JIG won't work because it damages the eMMc chip. But, you can make your own JIG. You can get stuff at your local electronics store, like Radioshack. I don't know where you live though, haha!
Even if the JIG gets you in download mode though, if Odin fails at factoryfs.img or NAND write start then it will still be bricked.

Related

help needed destroyed loader:(

hello felow galaxy users
i have a galaxy s and i tried to flash darky 9.1 rom on it
when i whas in bootloader i saw i had 3e recovery so i went on google to search on how to get back to 2e recovery
i found a file made by chainfire wich should arrange it treu odin
now when i connect the phone odin detects it and i can start but it always stays on seting up connection
now when i want to turn on the phone it gives a screen where i see a picture i need to hang the phone on the computer but it doesnt boot to the normal home screen anymore
hope some one can help me to get my phone working again
i can come in download mode but not in 3e recovery anymore
please help me as i need my phone work
let odin run for over 20 min without succes always on setup connection
and im using windows 7
...
go in to download mode and use ODIN??? you know what i mean???
mateusz1990 said:
go in to download mode and use ODIN??? you know what i mean???
Click to expand...
Click to collapse
no not quite sure
im trying to use odin now to flash chainfire his root and 2e recovery tar file
but it always stays on setup connection:S
miniterror said:
no not quite sure
im trying to use odin now to flash chainfire his root and 2e recovery tar file
but it always stays on setup connection:S
Click to expand...
Click to collapse
I used to love your ROMs for my old Touch HD.. good to see you now have a Galaxy S!
Not so sure from your posts above what method you have tried. When are you trying to connect Odin? You need to be in Download Mode first, fire up Odin, then connect your phone...
Is this what you are doing?
Also, which version of Odin you using? In Win7 you may need to right click and run as administrator?
The best way is to look on the odin how to here in forum
miniterror said:
hello felow galaxy users
i have a galaxy s and i tried to flash darky 9.1 rom on it
when i whas in bootloader i saw i had 3e recovery so i went on google to search on how to get back to 2e recovery
i found a file made by chainfire wich should arrange it treu odin
now when i connect the phone odin detects it and i can start but it always stays on seting up connection
now when i want to turn on the phone it gives a screen where i see a picture i need to hang the phone on the computer but it doesnt boot to the normal home screen anymore
hope some one can help me to get my phone working again
i can come in download mode but not in 3e recovery anymore
please help me as i need my phone work
let odin run for over 20 min without succes always on setup connection
and im using windows 7
Click to expand...
Click to collapse
Brother, use Odin3 v1.7 from my signature & see if it detects? A lot of guys have recovered their phones using 1.7. trust me.
pull the battery
wait a few seconds
put the battery back in
hold vol-down + power + home
You should get into download mode
connect the phone physically to the pc
flash a ROM or a kernel or whatever you desire
I wish you good luck^^
Close any kies process running in background and try again
Sent from my GT-I9000 using XDA App
krs360 said:
I used to love your ROMs for my old Touch HD.. good to see you now have a Galaxy S!
Not so sure from your posts above what method you have tried. When are you trying to connect Odin? You need to be in Download Mode first, fire up Odin, then connect your phone...
Is this what you are doing?
Also, which version of Odin you using? In Win7 you may need to right click and run as administrator?
Click to expand...
Click to collapse
glad you liked my rom
i personally dont have a galaxy
its from a friend
i have a desire hd way more easy to flahs then these samsungs(my brother has a galaxy to)
i have tried several odin versions but all without succes
he method i used is turn phone in downloadmode(says it with big letters on the screen) then start odin and connect the usb cable
odin detects it but never had succes(last attempt i let it run for 237 minutes)
the thing i wnated to flahs is succeded now but still not getting 2e recovery
gonna have to lok a little further on how to put darky his rom on it or you guys recoomend a better one
ragin said:
Brother, use Odin3 v1.7 from my signature & see if it detects? A lot of guys have recovered their phones using 1.7. trust me.
Click to expand...
Click to collapse
thanks mate
the first odin that actually succeeded flashing
to bad it still odenst has 2e recovery now or better yet no recovery at all but i can see the galaxy s boot up screen again
theduckking said:
pull the battery
wait a few seconds
put the battery back in
hold vol-down + power + home
You should get into download mode
connect the phone physically to the pc
flash a ROM or a kernel or whatever you desire
I wish you good luck^^
Click to expand...
Click to collapse
thanks mate
corgar said:
Close any kies process running in background and try again
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
thanks for the tip
will do that
edit: muchias gracias everybody its working again
you guys saved me alot of money
and i have recovery 2e wich i wnated to flash clockwork update.zip
at least i think it does work again
i hear a bootup sound and i see a animation
will report later as my work break is over
uhhmmmm is it now bricked?
now it doesnt do a thing anymore
when i press buttons for downloadmode nothing happens
when i only press the power button nothing happens
its completley dead now:S
is there anything i can do to force a start to anything
maybe with a software setup on the sd card?
or a script
most devices have a code wich will hot restart the phone to bootloader
read something about a jig you guys think it will work
gonna buy the stuff to make one tomorow
hope it works
miniterror said:
uhhmmmm is it now bricked?
now it doesnt do a thing anymore
when i press buttons for downloadmode nothing happens
when i only press the power button nothing happens
its completley dead now:S
is there anything i can do to force a start to anything
maybe with a software setup on the sd card?
or a script
most devices have a code wich will hot restart the phone to bootloader
read something about a jig you guys think it will work
gonna buy the stuff to make one tomorow
hope it works
Click to expand...
Click to collapse
The jig most likely wont work if the phone is completely dead, you could try a hairdryer it seems to work sometimes. Otherwise its back to samsung.
uciu said:
The jig most likely wont work if the phone is completely dead, you could try a hairdryer it seems to work sometimes. Otherwise its back to samsung.
Click to expand...
Click to collapse
can you link me to a page with the hairdryertrick?
cant find anything on google about it on how to do it
Maybe you've tried this already but I've had this problem after a bad flash and the phone wouldn't boot up anymore. I just remove the battery and all good again.
Sent from my GT-I9000 using XDA App
hmmm still no progress yet
i made a rig and even with that it doesnt boot or turn on
also when i put in the charger i dont see a light turning on its charging
wish i could have any form of live in it
I had the same problem, had to send it back but did not test it with a jig. Got one shortly after
Sent from my GT-I9000 using XDA App
jaju123 said:
I had the same problem, had to send it back but did not test it with a jig. Got one shortly after
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
thanks for all youre help guys
i didnt have any succes and i gave it back so it can be ruturned to the provider
hope it falls under warranty
did yours fall under warranty or under insurance of youre phone?
If you bricked your phone than pm me i helped many of peoples

bricked my note

hi all i think i have bricked my note trying to upgrade to ice cream sandwich followed the instructions but missed Check Re-Partition option in odin ?? now it wont even boot at all ?? is there anyway of bringing it back to life or anybody i can pay to do it for me who lives in northwest uk ? or will samsung repair it in warranty ?? i hope some kind person can help me i am well gutted thanks
How did you brick it exactly? Proper process? ...coz if you flashed cf repack it should not be a problem. ..
Sent from my GT-N7000 using xda premium
Remove battery for few seconds n then put it back, try to enter recovery, if access recovery thn wipe cache n data
Try download mode, n reflash stock rom with pc
Still not works get jig n try it.
Sent from my GT-N7000 using xda premium
@dr.ketan hi thanks for the reply m8
i used this method
Here is the files that should be selected on odin :
PIT : Q1_20110919_32GB.pit
PDA : N7000_CODE_N7000XXLP1_CL88317_REV02_user_mid_noship.tar.md5
PHONE : MODEM_N7000XXLP1_REV_05_CL1098475.tar.md5
CSC : GT-N7000-MULTI-CSC-OXALP1.tar.md5
Press Start button then upgrading Samsung Galaxy Note GT-N7000 to Ice Cream Sandwich ICS 4.0.3 N7000XXLP1 process will be started
Wait until finish and odin show PASS! but missed the Check Re-Partition option ???? like a fool and now my phone is bricked ?? it wont do anything my pc say recognised usb device thats all ??? i hope you can help me m8
Do you have a 32gb version of the Note?
If not you are using the wrong pit-file.
There is one to the 16gb version too, and just Google for it.
Skickat från min GT-N7000 via Tapatalk
yes m8 i used the 16gb version but missed the Check Re-Partition option on odin thats why its bricked m8 ?? is there anybody who repairs them in uk ??????
Define brick, is it completely dead?
No download mode?
Skickat från min GT-N7000 via Tapatalk
yes m8 no download mode just dead and pc says recognised usb device thats all ?? m8 duno if usb jig would work not shure if they sell them for note ????
I have heard about flashes gone wrong and after that the screen then doesn't work.
Try to remove the battery then insert it and try to enter download mode, vol down home and power then I belive you have to push vol up once to confirm to enter download mode.
Then look if odin recognises yor phone, if so try to flash it again.
This is a longshot but worth a try.
Skickat från min GT-N7000 via Tapatalk
yea flashed sgs2 ics on my note lol instead of the sgs2 no screen but sound worked had to blind download odin flash it was fun. maybe he can do the same thing just get it in download mode the button combo than hit up plug it in the usb and see if odin see's it.
thanks for all your help but i have tryed evrthing ? i think its back to samsung to sort it out fingered crossed
Where is cf-root for n7000xxlp1 do you know the link
cem1900 said:
Where is cf-root for n7000xxlp1 do you know the link
Click to expand...
Click to collapse
There is no CF--Root for XXLP1.
Battery not empty? .....
pem1 said:
thanks for all your help but i have tryed evrthing ? i think its back to samsung to sort it out fingered crossed
Click to expand...
Click to collapse
http://dx.com/unbrick-download-301k-usb-mode-jig-for-samsung-t959-i9000-i897-m110s-i8700-i9100-93514
This should do the trick.
@Cyberdutch hi m8 do you no anybody who has used one of these usb jigs ???? i got told they wont work for a dead note ???? and only reset the conter and takes the yellow triangle away ??? if you say they will work i will get one and give it a go ??? just ordered one anyway to give it a go ?? but i have sent it back to samsung to see what they do
pem1 said:
@Cyberdutch hi m8 do you no anybody who has used one of these usb jigs ???? i got told they wont work for a dead note ???? and only reset the conter and takes the yellow triangle away ??? if you say they will work i will get one and give it a go ??? just ordered one anyway to give it a go ?? but i have sent it back to samsung to see what they do
Click to expand...
Click to collapse
This Jig puts a dead Note into download mode , so you are able to flash again with odin.
Turn off your phone and pull out the battery
Put the battery back and don't turn it on
Plug the JIG into the micro USB port on the phone
After about 2 seconds, you can see the yellow download mode logo on the screen.
Remove the JIG
Connect your phone with USB cable to computer and then flash your phone via the program "odin"
This JIG should work for all Android Samsungs.
Its just US$ 1,60 and free shipping so worth a try.
If it doesn't work you should send it to Samsung.
Good luck and let us know about the progress.

[i9505]I think I've hard bricked my phone

Hi guys,
So apparently I did a very stupid thing today. I have a MAC and a Windows 7 on my bootcamp. I've downloaded the firmware for my country (Philippines) from sammobile link: http://hotfile.com/dl/234886746/526112d/GLB-I9505XXUBMG5-20130710140005.zip.html.
I've used heimdall(basically odin for linux/MAC) and if you're familiar with it you actually need to extract the .tar files and flash them one by one on heimdall whereas on odin you just put it on PDA.
Here's what exactly what I did:
1. Booted to download mode(obviously)
2. I then fired up heimdall and added the pit file which I've downloaded from my device. Again if you're familiar with heimdall, you actually need the pit file everytime you flash unlike odin.
3. This is the part where I think I've screwed something up, I've flashed these files which I've extracted from the MG5 .tar file:
- modem.bin
- NON-HLOS.bin
- boot.img
- recovery.img
- aboot.mbn
- cache.img.ext4
- hidden.img.ext4
- rpm.mbn
- sbl2.mbn
- sbl3.mbn
- system.img.ext4
- tz.mbn
According to heimdall the flash was successful and immediately exited download mode. This is the part when the phone was supposed to reboot but it didn't. The blue led was lit and the phone is not rebooting at all so I manually rebooted it via the power button. Now the phone is not booting at all. Literally no power.
I cannot enter recovery mode and the worse part, I cannot enter that damn download mode to try and re-flash the firmware again. The phone has about 90% charge left before I rebooted manually. Also the phone is not charging. I mean even if it's turned off it should charge with the charging animation to indicate that it's charging or the led is lit up, but in this case there was no led lit up nor the charging animation.
I'm quite frustrated right now and I know I should have used ODIN considering that I have bootcamp with Win 7 installed, but I did it for testing purposes and I paid the price and ended up with a $650 brick
Now I know I'm screwed and have probably voided my warranty by doing all this but I just wanna know where did it go wrong or is there something else that I could do before I send it for repairs?
Honestly ... Go back to shop and tell them that Kies told you that there is an update ... and after the phone havent start ...
Or try like this:
Pull out the battery
Plug USB
Hold volume up
and plug the battery
Should see it.. if not try with JIG to enter in download mode
spinky360 said:
Honestly ... Go back to shop and tell them that Kies told you that there is an update ... and after the phone havent start ...
Or try like this:
Pull out the battery
Plug USB
Hold volume up
and plug the battery
Should see it.. if not try with JIG to enter in download mode
Click to expand...
Click to collapse
Yeah I'll go to the shop tomorrow, just wanting to know if there is something else that can be done as the repairs could take months.
There'll be no way for them to know what actually happened and if I'm lucky I would still have warranty and not pay any single cent lol. I'm guessing that they'll replace the motherboard or sumthin. Thank you anyway I'll try that
perhaps your file is corrupted.
even if redownload the firmware and use odin to check the MD5 sum.
you must do your self a JIG usb dongle to force the download mode on your phone.
hope that help you.
mkh.mourad said:
perhaps your file is corrupted.
even if redownload the firmware and use odin to check the MD5 sum.
you must do your self a JIG usb dongle to force the download mode on your phone.
hope that help you.
Click to expand...
Click to collapse
Maybe, but I'm pretty sure it won't hard brick the phone even if it's corrupted. Worst case scenario is that it would be a soft brick. Jig will probably work but I don't have access to it.
Something might have gone wrong on the way I've flashed it via heimdall. I've probably messed up and accidentally flashed the wrong pit(but I'm pretty sure I didn't) or probably the bootloader. Anyway I'll just save myself the trouble and just send the damn phone for repairs and suck up the 1 month wait. I just hope that they won't void my warranty. Not much I can do really.
chickentuna said:
Maybe, but I'm pretty sure it won't hard brick the phone even if it's corrupted. Worst case scenario is that it would be a soft brick. Jig will probably work but I don't have access to it.
Something might have gone wrong on the way I've flashed it via heimdall. I've probably messed up and accidentally flashed the wrong pit(but I'm pretty sure I didn't) or probably the bootloader. Anyway I'll just save myself the trouble and just send the damn phone for repairs and suck up the 1 month wait. I just hope that they won't void my warranty. Not much I can do really.
Click to expand...
Click to collapse
Take an usb cable and make a JIG... Less then 1 min to make it
Sent from my GT-I9505 using xda app-developers app
chickentuna said:
Maybe, but I'm pretty sure it won't hard brick the phone even if it's corrupted. Worst case scenario is that it would be a soft brick. Jig will probably work but I don't have access to it.
Something might have gone wrong on the way I've flashed it via heimdall. I've probably messed up and accidentally flashed the wrong pit(but I'm pretty sure I didn't) or probably the bootloader. Anyway I'll just save myself the trouble and just send the damn phone for repairs and suck up the 1 month wait. I just hope that they won't void my warranty. Not much I can do really.
Click to expand...
Click to collapse
---Repair dead boot I9505 via usb cable---
QHUSB Qualcomm driver download
samersh72 said:
---Repair dead boot I9505 via usb cable---
QHUSB Qualcomm driver download
Click to expand...
Click to collapse
This is just in case that his pc is geting signal from phone
Sent from my GT-I9505 using xda app-developers app
spinky360 said:
This is just in case that his pc is geting signal from phone
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
it will help also to get into download mode :good:
samersh72 said:
it will help also to get into download mode :good:
Click to expand...
Click to collapse
If his eMMC is not giving signal to start QHUSB ... Is useless
Sent from my GT-I9505 using xda app-developers app
samersh72 said:
---Repair dead boot I9505 via usb cable---
QHUSB Qualcomm driver download
Click to expand...
Click to collapse
Thanks but it didn't work. It gave me a little hope though no harm in trying. Really not sure if jig will work but one thing is for sure, I now have a $650 paper weight.
I just hope that the samsung guys won't be able to bring this back to life. I hope that they just replace the motherboard straight away because if they are able to resurrect the phone, I'm screwed. They will find out that I've modified it. Worse part is I will need to shoulder the repair costs which I wouldn't want if they void the warranty
Sent from my Galaxy Nexus using Tapatalk 4

Bricked Phone! - Dead - NEED HELP!!

Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
chure63 said:
Hi guys, I'm gonna tell you what happened with my S4 to see if you can help me.
I got a MetroPCS Galaxy S4 (SGH-M919N) then I went to a tech and unlocked it. After 2 days the screen started blinking in pink color and I decided to flash it with a stock ROM from T-Mobile (SGH-M919-TMB-M919UVUAMDL-1366964131) using ODIN. Everything was great, in a couple of days the screen went kinda black (No brightness at all) I could barely see it. In this state with the phone turned off and tried to plug in to the PC or charge it and started blinking in green color. I decided once again to flash it with the stock ROM mentioned above but the phone won't enter in recovery or download mode after that I tried to flash it with the CyanogenMOD Installer......everything was OK but it stuck in about 75%, left the phone connected for 20min aprox and nothing happened. I unplugged it and tried to turn it on (It vibrates but I get no startup sound, logo, boot, anything!) ODIN doesn't recognized anymore, can't enter in recovery or download.
I tried to reboot download with ADB to flash it with ODIN but usb debugging is not enabled and ADB commands doesn't work.
I don't know what to do with my S4, I hope you guys can help me. I'm not in the US so I can't return it for replacement.
I hope to hear from you soon. THANKS IN ADVANCE.
Click to expand...
Click to collapse
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
RossFixxed said:
Is the battery working ok? Does the LED go red when charger is plugged in as normal?
What happens when you try to boot to recovery?
Click to expand...
Click to collapse
The battery is OK, I tested it already with another phone. The LED doesn't turn on when the charger is plugged in. When I try to enter to recovery it vibrates but nothing else happens (Black Screen).
Lennyz1988 said:
If your screen start blinking pink and after that turning black, why do assume it's a software problem? No rom would cause that. It's clearly a hardware failure.
Click to expand...
Click to collapse
The screen would cause no sound, no LED light, no download or recovery mode, etc..?
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
HassanM said:
Wrong section...
Sent from my GT-I9500 using Tapatalk 4 - Hassan K. Malik
Click to expand...
Click to collapse
Where should I post this? Thank you.
chure63 said:
Where should I post this? Thank you.
Click to expand...
Click to collapse
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
erikasnoske said:
mabye try to use Odin if you can go to Download mode, try to install Android 4.3 with repartition (pit file)... Did you try? Can you go somehow to CWM? If yes, try to format EVERYTHING as possible - system, data etc. than try again method via Odin...
Click to expand...
Click to collapse
I can't get into download or recovery mode.
chure63 said:
I can't get into download or recovery mode.
Click to expand...
Click to collapse
oh god, I didn't have this experience, sorry, I can't help you at all then
Jtag
Jtag?
jd1639 said:
Jtag
Click to expand...
Click to collapse
Hiya I found as a bit of a n00b Jtag painful as a senior member would there be a guide that we could learn from? I wasn't able to find one.:fingers-crossed:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
jd1639 said:
Jtag
Click to expand...
Click to collapse
I don't know much about it. Which box will be helpful to debrick it? Thanks.
chure63 said:
I don't know much about it. Which box will be helpful to debrick it? Thanks.
Click to expand...
Click to collapse
Google mobiletechvideos
Sent from my Nexus 5 using xda app-developers app
95mediatech said:
Service center is better idea, since they can't go to download mode to see your phone stil got warranty or not.. just say phone dead ... while In pocket automatically
Generated by Galaxy S4® Octa-Core™ Black-Mambo , Signature not required.©
Click to expand...
Click to collapse
I'm not in the US....
chure63 said:
I'm not in the US....
Click to expand...
Click to collapse
You don't have to be in the US, it's just going to cost you more in shipping. Maybe you can find someone in your country that can jtag. Try some of the local phone repair shops.
Sent from my Nexus 5 using xda app-developers app
Have you tryed it?
http://forum.xda-developers.com/showthread.php?t=2265477
At the bottom there are some information "how to revive bricked device". Have you tryed it?

Looking 4 fix for b.s.o.d. Note 4

I have SM-N910V and my notification lights work and it takes a charge, but my display is black ( no there are no cracks) and I have tried the battery drain method 1,2,3 minutes several times with no luck..... any1 have any other solutions,, I have exhausted all the searches I could think of..
Thank you in advance for any ideas/help
Can you boot in to download mode or recovery
Yes ,, just can't see anything...
So how do you know if you can boot in to download mode if you can't see anything?
Try to flash new stock rom with pit file.
Like you would like to unbrick it
a602820922 said:
So how do you know if you can boot in to download mode if you can't see anything?
Try to flash new stock rom with pit file.
Like you would like to unbrick it
Click to expand...
Click to collapse
Odin says it is connected,, when attempting to put it in download mode.. and I will try that ,, not my phone so I was trying not to erase everything,, but it might just be the best way to fix
So if you turn it on does it make any sound, or something?
When it's ON and you plug it in to pc can you see it there?
Ok I have tried Odin and the phone is recognized on computer,, but no luck with fixing the display,,,,, I think the display (board) is cracked ...oh well
I am still rocking mine on star's Apocalyps Rom ....

Categories

Resources