hi all i think i have bricked my note trying to upgrade to ice cream sandwich followed the instructions but missed Check Re-Partition option in odin ?? now it wont even boot at all ?? is there anyway of bringing it back to life or anybody i can pay to do it for me who lives in northwest uk ? or will samsung repair it in warranty ?? i hope some kind person can help me i am well gutted thanks
How did you brick it exactly? Proper process? ...coz if you flashed cf repack it should not be a problem. ..
Sent from my GT-N7000 using xda premium
Remove battery for few seconds n then put it back, try to enter recovery, if access recovery thn wipe cache n data
Try download mode, n reflash stock rom with pc
Still not works get jig n try it.
Sent from my GT-N7000 using xda premium
@dr.ketan hi thanks for the reply m8
i used this method
Here is the files that should be selected on odin :
PIT : Q1_20110919_32GB.pit
PDA : N7000_CODE_N7000XXLP1_CL88317_REV02_user_mid_noship.tar.md5
PHONE : MODEM_N7000XXLP1_REV_05_CL1098475.tar.md5
CSC : GT-N7000-MULTI-CSC-OXALP1.tar.md5
Press Start button then upgrading Samsung Galaxy Note GT-N7000 to Ice Cream Sandwich ICS 4.0.3 N7000XXLP1 process will be started
Wait until finish and odin show PASS! but missed the Check Re-Partition option ???? like a fool and now my phone is bricked ?? it wont do anything my pc say recognised usb device thats all ??? i hope you can help me m8
Do you have a 32gb version of the Note?
If not you are using the wrong pit-file.
There is one to the 16gb version too, and just Google for it.
Skickat från min GT-N7000 via Tapatalk
yes m8 i used the 16gb version but missed the Check Re-Partition option on odin thats why its bricked m8 ?? is there anybody who repairs them in uk ??????
Define brick, is it completely dead?
No download mode?
Skickat från min GT-N7000 via Tapatalk
yes m8 no download mode just dead and pc says recognised usb device thats all ?? m8 duno if usb jig would work not shure if they sell them for note ????
I have heard about flashes gone wrong and after that the screen then doesn't work.
Try to remove the battery then insert it and try to enter download mode, vol down home and power then I belive you have to push vol up once to confirm to enter download mode.
Then look if odin recognises yor phone, if so try to flash it again.
This is a longshot but worth a try.
Skickat från min GT-N7000 via Tapatalk
yea flashed sgs2 ics on my note lol instead of the sgs2 no screen but sound worked had to blind download odin flash it was fun. maybe he can do the same thing just get it in download mode the button combo than hit up plug it in the usb and see if odin see's it.
thanks for all your help but i have tryed evrthing ? i think its back to samsung to sort it out fingered crossed
Where is cf-root for n7000xxlp1 do you know the link
cem1900 said:
Where is cf-root for n7000xxlp1 do you know the link
Click to expand...
Click to collapse
There is no CF--Root for XXLP1.
Battery not empty? .....
pem1 said:
thanks for all your help but i have tryed evrthing ? i think its back to samsung to sort it out fingered crossed
Click to expand...
Click to collapse
http://dx.com/unbrick-download-301k-usb-mode-jig-for-samsung-t959-i9000-i897-m110s-i8700-i9100-93514
This should do the trick.
@Cyberdutch hi m8 do you no anybody who has used one of these usb jigs ???? i got told they wont work for a dead note ???? and only reset the conter and takes the yellow triangle away ??? if you say they will work i will get one and give it a go ??? just ordered one anyway to give it a go ?? but i have sent it back to samsung to see what they do
pem1 said:
@Cyberdutch hi m8 do you no anybody who has used one of these usb jigs ???? i got told they wont work for a dead note ???? and only reset the conter and takes the yellow triangle away ??? if you say they will work i will get one and give it a go ??? just ordered one anyway to give it a go ?? but i have sent it back to samsung to see what they do
Click to expand...
Click to collapse
This Jig puts a dead Note into download mode , so you are able to flash again with odin.
Turn off your phone and pull out the battery
Put the battery back and don't turn it on
Plug the JIG into the micro USB port on the phone
After about 2 seconds, you can see the yellow download mode logo on the screen.
Remove the JIG
Connect your phone with USB cable to computer and then flash your phone via the program "odin"
This JIG should work for all Android Samsungs.
Its just US$ 1,60 and free shipping so worth a try.
If it doesn't work you should send it to Samsung.
Good luck and let us know about the progress.
Related
hello felow galaxy users
i have a galaxy s and i tried to flash darky 9.1 rom on it
when i whas in bootloader i saw i had 3e recovery so i went on google to search on how to get back to 2e recovery
i found a file made by chainfire wich should arrange it treu odin
now when i connect the phone odin detects it and i can start but it always stays on seting up connection
now when i want to turn on the phone it gives a screen where i see a picture i need to hang the phone on the computer but it doesnt boot to the normal home screen anymore
hope some one can help me to get my phone working again
i can come in download mode but not in 3e recovery anymore
please help me as i need my phone work
let odin run for over 20 min without succes always on setup connection
and im using windows 7
...
go in to download mode and use ODIN??? you know what i mean???
mateusz1990 said:
go in to download mode and use ODIN??? you know what i mean???
Click to expand...
Click to collapse
no not quite sure
im trying to use odin now to flash chainfire his root and 2e recovery tar file
but it always stays on setup connection:S
miniterror said:
no not quite sure
im trying to use odin now to flash chainfire his root and 2e recovery tar file
but it always stays on setup connection:S
Click to expand...
Click to collapse
I used to love your ROMs for my old Touch HD.. good to see you now have a Galaxy S!
Not so sure from your posts above what method you have tried. When are you trying to connect Odin? You need to be in Download Mode first, fire up Odin, then connect your phone...
Is this what you are doing?
Also, which version of Odin you using? In Win7 you may need to right click and run as administrator?
The best way is to look on the odin how to here in forum
miniterror said:
hello felow galaxy users
i have a galaxy s and i tried to flash darky 9.1 rom on it
when i whas in bootloader i saw i had 3e recovery so i went on google to search on how to get back to 2e recovery
i found a file made by chainfire wich should arrange it treu odin
now when i connect the phone odin detects it and i can start but it always stays on seting up connection
now when i want to turn on the phone it gives a screen where i see a picture i need to hang the phone on the computer but it doesnt boot to the normal home screen anymore
hope some one can help me to get my phone working again
i can come in download mode but not in 3e recovery anymore
please help me as i need my phone work
let odin run for over 20 min without succes always on setup connection
and im using windows 7
Click to expand...
Click to collapse
Brother, use Odin3 v1.7 from my signature & see if it detects? A lot of guys have recovered their phones using 1.7. trust me.
pull the battery
wait a few seconds
put the battery back in
hold vol-down + power + home
You should get into download mode
connect the phone physically to the pc
flash a ROM or a kernel or whatever you desire
I wish you good luck^^
Close any kies process running in background and try again
Sent from my GT-I9000 using XDA App
krs360 said:
I used to love your ROMs for my old Touch HD.. good to see you now have a Galaxy S!
Not so sure from your posts above what method you have tried. When are you trying to connect Odin? You need to be in Download Mode first, fire up Odin, then connect your phone...
Is this what you are doing?
Also, which version of Odin you using? In Win7 you may need to right click and run as administrator?
Click to expand...
Click to collapse
glad you liked my rom
i personally dont have a galaxy
its from a friend
i have a desire hd way more easy to flahs then these samsungs(my brother has a galaxy to)
i have tried several odin versions but all without succes
he method i used is turn phone in downloadmode(says it with big letters on the screen) then start odin and connect the usb cable
odin detects it but never had succes(last attempt i let it run for 237 minutes)
the thing i wnated to flahs is succeded now but still not getting 2e recovery
gonna have to lok a little further on how to put darky his rom on it or you guys recoomend a better one
ragin said:
Brother, use Odin3 v1.7 from my signature & see if it detects? A lot of guys have recovered their phones using 1.7. trust me.
Click to expand...
Click to collapse
thanks mate
the first odin that actually succeeded flashing
to bad it still odenst has 2e recovery now or better yet no recovery at all but i can see the galaxy s boot up screen again
theduckking said:
pull the battery
wait a few seconds
put the battery back in
hold vol-down + power + home
You should get into download mode
connect the phone physically to the pc
flash a ROM or a kernel or whatever you desire
I wish you good luck^^
Click to expand...
Click to collapse
thanks mate
corgar said:
Close any kies process running in background and try again
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
thanks for the tip
will do that
edit: muchias gracias everybody its working again
you guys saved me alot of money
and i have recovery 2e wich i wnated to flash clockwork update.zip
at least i think it does work again
i hear a bootup sound and i see a animation
will report later as my work break is over
uhhmmmm is it now bricked?
now it doesnt do a thing anymore
when i press buttons for downloadmode nothing happens
when i only press the power button nothing happens
its completley dead now:S
is there anything i can do to force a start to anything
maybe with a software setup on the sd card?
or a script
most devices have a code wich will hot restart the phone to bootloader
read something about a jig you guys think it will work
gonna buy the stuff to make one tomorow
hope it works
miniterror said:
uhhmmmm is it now bricked?
now it doesnt do a thing anymore
when i press buttons for downloadmode nothing happens
when i only press the power button nothing happens
its completley dead now:S
is there anything i can do to force a start to anything
maybe with a software setup on the sd card?
or a script
most devices have a code wich will hot restart the phone to bootloader
read something about a jig you guys think it will work
gonna buy the stuff to make one tomorow
hope it works
Click to expand...
Click to collapse
The jig most likely wont work if the phone is completely dead, you could try a hairdryer it seems to work sometimes. Otherwise its back to samsung.
uciu said:
The jig most likely wont work if the phone is completely dead, you could try a hairdryer it seems to work sometimes. Otherwise its back to samsung.
Click to expand...
Click to collapse
can you link me to a page with the hairdryertrick?
cant find anything on google about it on how to do it
Maybe you've tried this already but I've had this problem after a bad flash and the phone wouldn't boot up anymore. I just remove the battery and all good again.
Sent from my GT-I9000 using XDA App
hmmm still no progress yet
i made a rig and even with that it doesnt boot or turn on
also when i put in the charger i dont see a light turning on its charging
wish i could have any form of live in it
I had the same problem, had to send it back but did not test it with a jig. Got one shortly after
Sent from my GT-I9000 using XDA App
jaju123 said:
I had the same problem, had to send it back but did not test it with a jig. Got one shortly after
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
thanks for all youre help guys
i didnt have any succes and i gave it back so it can be ruturned to the provider
hope it falls under warranty
did yours fall under warranty or under insurance of youre phone?
If you bricked your phone than pm me i helped many of peoples
Im unsure as to whether my Galaxy S is completely bricked.
My Galaxy S is stuck on a screen displaying - Phone ! Computer
I can't access download mode by the 3-button combo or by the USB jig.
Is there any way I can either boot the phone or get to download mode so i can flash with odin.
PS - I got to this stage by accidentally unplugging the device when flashing firmware in odin.
probably the answer is no im afraid if 3 combo AND USB jig isn't working...
Take the battery out for 10-15 min then place the battery and try Download Mode or the USB-JIG and see if get's to Download Mode.
Find someone with a riff box ... if your in the uk inbox me
Sent from my xxx using Tapatalk .
A friend of mine had a similar problem but the phone didn't show anything on the screen, I told him to do the button combo for donwload mode hold them for 10sec and connect it to the pc with odin open and it just work btw the screen wasn't showing download but it was, give it a try who knows
Sent from my GT-I9000 using xda premium
Now that my phones dead i have almost no way to access the internet so im sorry for the late reply
I'll try all these methods tonight when i get home from work.
Thanks everyone for your thoughts.
And btw I am in the UK, although I have no idea what a riff box is lol
A riff box is a box that fixes dead phones try asking your towns unlocking shop if thay have one if not inbox me and I'll run though the best way of getting your phone fixed
Sent from my xxx using Tapatalk.
hi @all
follow instruction to reset the binary counter:
before you start, you need a actually gnote rom and you need usb jig!! if you not have a jig, dont try this!!!! im not responsible if you brick your phone!!
1. download a sgs2 bootloader(search in sgs2 forum --> bootloader)
2. flash it over odin as pda
3. put the battery out
4. put the battery in and connect the usb jig
5. connect your phone with pc
6. flash the rom via odin as pda
7. when is done, disconnect the phone from pc and remove the jig
8. put the battery out and again in
9. connect your phone whit the pc over the normal usb connector, flashed rom will start with the update, phone reboot self ---> finish
dont ask me, dont look for support, im not developer, i only wrote down what i do and how i reset the counter to 0..
many thanks at bodivas, hi was the first one who try this, and i can confirm it, it works..
with my jig i can't connect the note to the pc, just the jig. .. how is your jig? a picture or a link to buy it?
thanks
geek78 said:
with my jig i can't connect the note to the pc, just the jig. .. how is your jig? a picture or a link to buy it?
thanks
Click to expand...
Click to collapse
here a link in ebay.. http://www.ebay.co.uk/itm/Samsung-i...aCables_JN&hash=item35b3d8fd9c#ht_1429wt_1139
but, if you put the jig in, the phone sould start whit download mode.. normally i do that whit sgs2, you can disconnect the jig and connect the phone whit the normal usb cable.. phone stay in download mode, and you can flash..
you can try it out before you flash the bootloader.. but i cant give you warranty for that..
I have already rebuilt procedure 3 times and all ok..
Guide:
1. flash over Odin as Pda Bootloader_GS2.tar
2. put the battery out
3. put the battery in and connect the usb jig ( approximately 10 seconds)
4. connect your phone with pc and flash via Odin as Pda Bootloader_N7000.tar..
If your phone does not start, remove and reinsert the battery..
files for Odin:
Sbl.bin from SGS2:
View attachment Bootloader_GS2.rar
Sbl.bin from Note:
View attachment Bootloader_N7000.rar
Unpack these files,before flashing ..
bodivas said:
I have already rebuilt procedure 3 times and all ok..
files for Odin:
Sbl.bin from SGS2:
http://www.multiupload.com/971QBMMTHX
Sbl.bin from Note:
http://www.multiupload.com/MQCAFDXURN
m_adnan,
add these files in your post..
Click to expand...
Click to collapse
yes, same for me
m_adnan said:
here a link in ebay.. http://www.ebay.co.uk/itm/Samsung-i...aCables_JN&hash=item35b3d8fd9c#ht_1429wt_1139
but, if you put the jig in, the phone sould start whit download mode.. normally i do that whit sgs2, you can disconnect the jig and connect the phone whit the normal usb cable.. phone stay in download mode, and you can flash..
you can try it out before you flash the bootloader.. but i cant give you warranty for that..
Click to expand...
Click to collapse
The auction has ended. Can you show a current one?
The cheapest jig in the world
anonymous572 said:
The cheapest jig in the world
Click to expand...
Click to collapse
:O £1.03 delivered!
Thats ridiculous! Ive ordered one!
I wonder where it's shipped from and how much that costs?!
How do you read the value of the counter?
In step 6, do you flash the original GNote sbl?
Step 7 is confusing - it says to remove the jig, but the jig was not in, because we were connected to the computer for Odin ???
RashaMatt said:
How do you read the value of the counter?
In step 6, do you flash the original GNote sbl?
Click to expand...
Click to collapse
Yes., and then you just restart the phone..Stop!!!
DealExtreme is not the cheapest, just the one with best prices/spread relationship.
I paid my jig 0.80€ shipped off a random chinese seller on ebay
did anyone else tried this? this thread seems to be eating dust!!! any problem with this mod?
hmmmmm
LMAO, not so sure id be wanting to try these steps, i think ya need to spend less time worrying about the counters and more time enjoying ya phone, im sure a safer method will emerge in time.
chowdarygm said:
did anyone else tried this? this thread seems to be eating dust!!! any problem with this mod?
Click to expand...
Click to collapse
I tried and it didn't work for me, but I was not on JK4 to start (maybe that's required). Nothing bad happened though.
graemeg said:
LMAO, not so sure id be wanting to try these steps, i think ya need to spend less time worrying about the counters and more time enjoying ya phone, im sure a safer method will emerge in time.
Click to expand...
Click to collapse
Yep, I ordered a jig yesterday but am coming to the same conclusion - I can live with my nice yellow triangle for now!
bodivas said:
I have already rebuilt procedure 3 times and all ok..
Guide:
1. flash over Odin as Pda sbl.bin from sgs2
2. put the battery out
3. put the battery in and connect the usb jig ( approximately 10 seconds)
4. connect your phone with pc and flash via Odin as Pda Sbl.bin from GNote..
If your phone does not start, remove and reinsert the battery..
files for Odin:
Sbl.bin from SGS2:
Sbl.bin from Note:
Click to expand...
Click to collapse
Any chance you can upload these files again?
@arigosh: On Intratech thread you can find both the old and the new bootloader for S2
http://forum.xda-developers.com/showthread.php?t=1075278
I tried and posted the update on this Q&A before, it works on gNote and I have tried this twice.
Here's the link.
http://forum.xda-developers.com/showthread.php?t=1514002&highlight=remove+triangle
arigosh said:
Any chance you can upload these files again?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=19100010&postcount=4
You could flash a rooted ics build. Then run triangleaway. Then reflash gingerbread from cwm. Thats what i did. Now have 0 again and no triangle
Sent from my GT-N7000 using XDA
I've made a HUGE mistake... I wanted to flash Abysskernel over RocketRom V4 to make a full wipe. But I've done it to fast, without looking good at what I was doing.
I've flashed CYANOGENMOD 9... And flashing has stuck. Now, I can't start my phone. No more recovery, no more download mode !!!
I think I'm screwed.
Is there a little chance to repear it without SAV ?
Thank you.
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Try usb jig
Sent from my GT-N7000 using xda premium
musashiro said:
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Click to expand...
Click to collapse
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
zepretender said:
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
Click to expand...
Click to collapse
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
gee2012 said:
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
Click to expand...
Click to collapse
No download mode... Nothing. Full black screen.
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
bhasg1007 said:
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
Click to expand...
Click to collapse
What is "16gb pit file" ??
if its totally black and you cant turn it on, you are lucky if you still have the warranty.. they cant check the flash counter...
just tell them you suddenly cant open the phone
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
alexdumitru said:
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
Click to expand...
Click to collapse
I can't reach Download Mode :'(
Totally black screen.
I hope that musashiro is right.
hi
i have got the same problem.
alexdumitru your problem is not same. the link you shared they mention to solve softbrick devices. but me and zepretender got a hardbrick devices. it means you can not go to download mode. so i think only they solve it with changing mainboard or damaged parts.
is there any other new ways for solve hard brick devices??
That's a hard brick too. The emmc is damaged, though it enters download mode, it's true. But I've seen cases where the device entered download mode, though the screen remained blank. So try to enter download mode, even if the screen is still blank and then connect it to the computer. If Odin recognizes it, you might be lucky.
i´ve sufferd the same problem. i´ve bricked my note - no recovery, no download mode. i tried to go to download mode, but odin didn´t recognized usb connection. My phone was dead. I´ve sent my device to samsung for warranty repair.
Hmm I didn't know that.actually I hv tried everythng but odin didn't recgnse it. I will try your suggest ofcourse.its worth to try. So whle usb cble connected should I try to go to download mode? In some topics they mentioning about use another usb cable.which is dfferent than normal ones. Do u know anythng about it?
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
quarkw said:
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
Click to expand...
Click to collapse
If your phone is "superbricked" hard brick, then a JIG won't work because it damages the eMMc chip. But, you can make your own JIG. You can get stuff at your local electronics store, like Radioshack. I don't know where you live though, haha!
Even if the JIG gets you in download mode though, if Odin fails at factoryfs.img or NAND write start then it will still be bricked.
HI Guys.. please help me..this is my first time to change the ROM of SGY. but sad to say my phone is dead.. i cannot turn it on. even when i push the vol + ,home, power keys or vol - , home, power keys or even the vol up vol down battery removed usb plug in trick.. what will i do guys..please help me..
charge your phone for atleast half an hour.then try again.
SeNd FrOm GoD'z OwN CoUnTrY.......
thanks for the reply but i did that several times already.. i charged it even for a few hours but still no effect.. i just wondered if i use the odin tool it responds that the phone is connected but the phone is still black out.. but when i try the odin tool it fails everytime..
micqutiasol said:
thanks for the reply but i did that several times already.. i charged it even for a few hours but still no effect.. i just wondered if i use the odin tool it responds that the phone is connected but the phone is still black out.. but when i try the odin tool it fails everytime..
Click to expand...
Click to collapse
Press Volume Down+Home+Power Button Simultaneously and then flash stock thru odin for more detailed guide search xda!
done that one already,. but still no luck..i just notice when i connect my phone and open odin..it detected my phone and my computer says "Broadcom wireless modem connected"
What rom did you flash and if possible, can you provide details on how you flashed it?
Sent from my GT-S5360 using xda app-developers app
actually i dont remember already the exact rom i flashed.. but surely i remember that i use the odin v3 1.85
micqutiasol said:
actually i dont remember already the exact rom i flashed.. but surely i remember that i use the odin v3 1.85
Click to expand...
Click to collapse
Odin for flashing the rom?
Go to service centre if you cant enter in download mode.
Sent from my GT-S6102 using xda app-developers app
Search for how to solve hard bricks...
** rooting is new for me,
nd i am a noob to root....**
micqutiasol said:
actually i dont remember already the exact rom i flashed.. but surely i remember that i use the odin v3 1.85
Click to expand...
Click to collapse
Well, surely you didn't flash a custom rom. Cause c-roms are flashed via cwm or stock recovery.
Sent from my GT-S5360 using xda app-developers app
micqutiasol said:
actually i dont remember already the exact rom i flashed.. but surely i remember that i use the odin v3 1.85
Click to expand...
Click to collapse
try looking for someone who has a USB jig,
it could revive you through recovery
Try to enter download mode without battery..
amtra said:
Try to enter download mode without battery..
Click to expand...
Click to collapse
How
Sent from my HTC Sensation Z710e using xda app-developers app
Here dude try this
http://forum.xda-developers.com/showthread.php?t=1465800
dont forget to hit thanks button
micqutiasol said:
How
Sent from my HTC Sensation Z710e using xda app-developers app
Click to expand...
Click to collapse
take out ur battery , sim and connect ur mobile to pc then try to go to odin mode by pressing vol down+home+power button simultaneously and flash stock rom
tried that one too
KnightlyNinja said:
take out ur battery , sim and connect ur mobile to pc then try to go to odin mode by pressing vol down+home+power button simultaneously and flash stock rom
Click to expand...
Click to collapse
i have tried that one already but no luck.. but i think the pc detected the phone with (Broadcom wireless modem) and also odin.. what will i do?? pl;ease someone help me..
micqutiasol said:
i have tried that one already but no luck.. but i think the pc detected the phone with (Broadcom wireless modem) and also odin.. what will i do?? pl;ease someone help me..
Click to expand...
Click to collapse
try to use odin 1.84
or if no luck
i suggest go to your nearest Samsung Center
its for sure they will help you ^_^
hit thanks button if help
Ur phones motherboard is Dead .
I to had the same problem I had flashed wrong stock rom ie; of a different device and the phone was dead.
I got it fixed in service center for free as it was under warranty.
So take it to the service center ...And better have your fingers crossed....
GT S5360
Rom - Jelly Blast v4.0.5
Kernel - Marroc v2.0 Final
Overclocked - 1.2 GHz
Undervolted - -100 mV
Battery - 3200 mAh
SD Card - 32 GB class 10
Swap - 256 MB
SD / EXT - 2 GB ext 3
maybe you can make usb jig at home like this guy?
http://forum.xda-developers.com/showthread.php?t=1604707
If ur phone detected by ODIN try to flash Stock kernel and try to enter into recovery mode..