Database Users

[ODIN] Bricked Galaxy S4 (i9505)

I have Galaxy S4 (i9505). Custom ROM, rooted (Flashed by Odin).
Then i tried to flash recovery TWRP. Found my version of TWRP recovery on official site, downloaded an install for odin.
Then tried to flash and THIS happened - FAIL. I started to panic, tried to start again, and it's failed again, because PIT wasn't found
<ID:0/009> Get PIT for mapping..
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
After that I didn't know really what to do. and tried to flash firmware stock, but it has same result. No PIT.
So then i found the PIT file from reading the forum, and downloaded it for my i9505, and flash it with and without firmware stock. That's the log:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> Removed!!
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Added!
It seems like phone every time disconnects while PIT is flashing. Even Re-Partition is checked on.
Sorry for my english, if I said something grammatically wrong. Please help!

did you try with a other cable, cuz it looks like the phone disconnect (Like you said).

Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727

jd1639 said:
Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Thx i will try it!

THANK YOU SO MUCH!
I did it! I have uninstall my KIES from computer with Samsung driver.
Then i downloaded one of firmware stock from that link, it was 4 file installation in Odin. Restarted my computer and then tried to flash it.
It works! Thank you for my unbricked phone

Can i use a N910C pit file on my N910H

Hey guys, i have a note 4 N910H that comes with bloatware, since i dont want to root my device because of warranty issues i tried installing this rom N910HXXU1ANK5_N910HUWA1ANK5_PGU with odin wich acording to sammobile its compatible with my note 4, but in odin i get this error:
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1ANK5_N910HUWA1ANK5_N910HXXU1ANK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I read that i could fix the problem by flashing a pit file and checking the re-partition option in odin but the only pit file i could find was for the N910C, so can i use it? if not how can i get the N910H pit file? i have the stock rom that came with the phone.
Right now i cant boot up my note, i get a screen with a yellow warning sign that says FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRIED AGAIN, did that but it doesnt work, kies doesnt recognise my phone lol

Try flashing again with a different version of Odin. Sometimes it helps.
Also remove battery for a minute or so before trying to flash. Sometimes this helps.
Never tick repartition. Just leave the things that are already ticked and don't tick anymore items.
Don't flash N910C partition on N910H. Don't flash N910C firmware with odin on N910H because it will include modem etc which is not compatible with your device.
Good luck and don't worry, you should be able to get out of it pretty easily.

It didnt work, weird right acording to sammobile its supposed to be the same rom just without bloatware, after reading your reply i end up flashing the copy i had of the stock rom so i just can use my phone again ☺ thank you.
I read on some thread you dont include modems on your roms, i might just root and tried some custome roms already lol do you happend to know if i where to flash back to stock after having custom roms, if i can still update with official roms with odin?
Sent from my Galaxy NOTE 4

pikul said:
It didnt work, weird right acording to sammobile its supposed to be the same rom just without bloatware, after reading your reply i end up flashing the copy i had of the stock rom so i just can use my phone again ☺ thank you.
I read on some thread you dont include modems on your roms, i might just root and tried some custome roms already lol do you happend to know if i where to flash back to stock after having custom roms, if i can still update with official roms with odin?
Sent from my Galaxy NOTE 4
Click to expand...
Click to collapse
You can download roms from sammobile. Maybe the one you got was just a bad download as yes, any region should work if it is for the same device eg. N910H to N910H.
Yes my roms don't include modem. You can get the latest for your device after flashing the rom from post #3 in my thread. Latest kernels also in post #4.
A simple odin flash of stock firmware should get you back to stock

It seems your issue is regional. I have seen some cases where other region ROM not allowed to flash using odin and classically it fails at cache or Hidden (your logs suggest it failed at hidden)
So download your device ROM with same region as it was there when you purchase. If you don't know try different one and one should get success.

Yeah i guess thats the problem, mine came with a rom from trinidad, so to remove all the bloatware i tried to flash a rom for my country that has none, of course for the same model N910H but it just didnt work, anyways gonna root later and try customs
Sent from my Galaxy NOTE 4

stuck in bootloop even after flashing new rom

Hello,
So to start off I had encrypted CyanogenMOd 12.1 nightlies running on my T-Mobile Samsung Galaxy S5 with TWRP 2.8.7 recovery without any problems. I went to reboot and it got stuck in a bootloop, I tried restarting it and same thing. I tried wiping cache/dalvik and same thing. Sometimes it would make it to the "optimizing apps" screen and indefinitely hang on "starting apps", but mostly it gets stuck on the boot animation. I hadn't added or deleted anything prior to this happening. I had tried a number of possible solutions from various threads, none of which solved my issue. (Also, it never asked me to enter my password to startup which it usually did)
I then tried wiping dalvik, system , data, internal storage, and cache and flashing a fresh rom which did not work either. This time the bootloop only ever occurs on the boot animation screen.
What should be my next course of action?

Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)

*Detection* said:
Flash a stock ROM along with the PIT file for your model S5 (Flash both at the same time in ODIN)
Click to expand...
Click to collapse
I'm having trouble getting a stock rom, they keep corrupting at the end of the download and the download speed is throttled. Do you know of a good source to obtain a stock rom that won't take 2+ hours to download?

What model S5 is it?
Eg: Mine is G900F

*Detection* said:
What model S5 is it?
Eg: Mine is G900F
Click to expand...
Click to collapse
G900T

EzStyles said:
G900T
Click to expand...
Click to collapse
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e

*Detection* said:
Try this link
Code:
http://am4-r1f7-stor06.uploaded.net/dl/42f1fae6-1bca-4e2b-ae7a-f1959a6f1f9e
Click to expand...
Click to collapse
Awesome thank you that is working great! Much faster than the download links I have been finding. I will report back shortly with results

Good luck

*Detection* said:
Good luck
Click to expand...
Click to collapse
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?

EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F

*Detection* said:
Are you 100% sure about the model S5 you're trying to flash?
Check Settings > General > About
I've just spent the day with another member, who had the same error FAIL! message, and he was trying to flash a G900F ROM and PIT onto a G901F
Click to expand...
Click to collapse
100% positive. It's T-Mobile, I have the box with that model number and in download mode it shows product name: SM-G900T
Perhaps the files need to have a specific name in order to flash properly? I've run into that issue when reflashing motherboards
So I tried flashing without the PIT file and it "passed" according to odin but it is just stuck on the "Samsung Galaxy S5 Powered by Android" screen now

Ok, So i tried flashing the rom itself one more time and this time it worked! My phone is back to working now. Or, at least until I reboot again > I'll be back if there's any more issues haha. Thanks again for your help

Same Problem
EzStyles said:
So I tried flashing the file from that link along with a PIT file that I found on another thread on this site but it fails to flash.
The message from Odin is:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The message on my phone says:
Secure check fail : PIT
Would this be a bad pit file?
Click to expand...
Click to collapse
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?

Cendrez said:
Hi, I have a Galaxy S5 SM-G900M and it's in a bootloop, I tried to intall the stock rom with ODIN and Kies but still not work, maybe somebody have the PIT file for this model?
Click to expand...
Click to collapse
Did you have ODIN and Kies running at the same time? Make sure Kies service is stopped in system before running ODIN

Check Fail Device 3 binary 1 (Stuck Downloading Mode)

Hi,
I have a Galaxy S6 Edge and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the downloading mode
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:1
Please Help Me.

agitayuda said:
Hi,
I have a Galaxy S6 Edge and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the downloading mode
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:1
Please Help Me.
Click to expand...
Click to collapse
If you can be more spesific, u will being helped easily. Which variant/baseband/rom/firmware and etc. And check the attached image which is belongs with @xanthrax :good:

S6 Edge or Edge Plus ?

same problem please help
Im getting the same error message when I try to stock flash my regular s6. I have a G920P, I was told the t mobile G920t root would work, but now when I reboot I get the error "recvoery is not seandroid enforcing", and im stuck on the boot loader screen. I got the t mobile flash from aurtoroot. please help im stuck with a bricked phone.

Also have this error - Here is additional info
Hi, I am having this issue too. It sucks, I feel as if I have lost a limb!
I am not so experienced in this area so I will do my best on info:
RP SWREV: B:3 K:2 S:2 - I presume this is the model info and will assist you guys.
I have attached a screenshot of the error I get in Odin. Any help would be greatly appreciated. I am a little worried as this issue appears to be virtually unknown on the internet!
I am a first time poster so having issues sharing link.... hope this works: ht tp://tinypic.com/r/2e0mqu0/9
Thanks,
Adam
Also i am on a Galaxy S6.

r3dfour said:
Im getting the same error message when I try to stock flash my regular s6. I have a G920P, I was told the t mobile G920t root would work, but now when I reboot I get the error "recvoery is not seandroid enforcing", and im stuck on the boot loader screen. I got the t mobile flash from aurtoroot. please help im stuck with a bricked phone.
Click to expand...
Click to collapse
What are firmware are you flashing? You say you have a G920P this is the G928 S6Edge Plus thread
"And on that bombshell!"
Sent from my G928C Rockin AUDAX+ Rom and Eladios themes.
---------- Post added at 01:33 AM ---------- Previous post was at 01:31 AM ----------
fallaize said:
Hi, I am having this issue too. It sucks, I feel as if I have lost a limb!
I am not so experienced in this area so I will do my best on info:
RP SWREV: B:3 K:2 S:2 - I presume this is the model info and will assist you guys.
I have attached a screenshot of the error I get in Odin. Any help would be greatly appreciated. I am a little worried as this issue appears to be virtually unknown on the internet!
I am a first time poster so having issues sharing link.... hope this works: ht tp://tinypic.com/r/2e0mqu0/9
Thanks,
Adam
Also i am on a Galaxy S6.
Click to expand...
Click to collapse
Make sure you have the proper firmware this is the G928 S6Edge Plus thread. Not G920
"And on that bombshell!"
Sent from my G928C Rockin AUDAX+ Rom and Eladios themes.
---------- Post added at 01:39 AM ---------- Previous post was at 01:33 AM ----------
agitayuda said:
Hi,
I have a Galaxy S6 Edge and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the downloading mode
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:1
Please Help Me.
Click to expand...
Click to collapse
If you are stuck in download mode you're not bricked.
Make sure you have the proper firmware downloaded on your computer. Use Odin 3.10.06 Using winzip or similar tool unzip the firmware and you'll see four files.
Open Odin you'll see AP BL CP and CSC place the corresponding files you've unzipped from firmware into those slots and hit start button you should be up and running
agitayuda said:
Hi,
I have a Galaxy S6 Edge and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the downloading mode
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:1
Please Help Me.
Click to expand...
Click to collapse
"And on that bombshell!"
Sent from my G928C Rockin AUDAX+ Rom and Eladios themes.

Hi s7freak, could you please make a screenshot of the four files in odin? I cant find them.
Thank you
Beni

derboiistfly said:
Hi s7freak, could you please make a screenshot of the four files in odin? I cant find them.
Thank you
Beni
Click to expand...
Click to collapse
If you download the official firmware I was able to use the official firmware in the AP slot by itself
"All we know is...He's called the Stig!"
Sent from my Gorgeous G935F

I'm having this exact problem.
I am on a galaxy s6 edge, G925T.
I tried wiping the system and flashing again, nothing worked. I've tried flashing cyanogenmod, and stock rom, but they both give this same error.
The thing that initially broke the phone was trying to use CF-autoroot, and it put it into a bootloop. i was able to install TWRP but that's as far as i've gotten.
I was trying to copy a cyanogenmod zip file onto my phone to install from TWRP, but every time I tried, the transfer failed.

Check Fail Device 3 binary 1
Hi, I need Help with my Samsung Galaxy A7 2018 (SM-A750FN/DS)
I have a frp lock and a oem lock, I flashed the Combination-file on the Phone but it is the U3.
I can not flash any firmeware or combination file.
on the Screen from the Phone, Check fail (Bootloader) Device 3, Binary 1.
Sorry but can anyone Help me?:crying:

Help!! hard bricked

my phone loss him imei and i try to restore it by efs backup and restore
when i flash the efs by odin it bricked
and I try to flash it by stock rom pit, bl, ap, csc and modem and it dosen't fix
odin show this message
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sorry for my bad language

Which model S5 does it show in download mode?
Have you tried flashing just the stock ROM from sammobile .com with ODIN 3.10.7 ?

maybe using the pit file?

maybe a few more information about your phone model , firmware flashed etc will bring some idea on how to resolve it.

My phone is SM-G900H
and the firmware is \G900HXXU1BOG5_G900HODD1BOG1_INU_PAC

and I flash with odin 3.09 and 3.10.7 and doesn't work

any help here plz ?

prince.of.loven said:
any help here plz ?
Click to expand...
Click to collapse
lol wt! you flashed all that pit and bla bla bla is crazy you want destroying y phone
who said you to flash pit !! to restore efs you just confused some article here you read the false one
the first one replay ask you if you can enter in download mode ( if y phone respond first ) if no use jig !!