Hey guys, i have a note 4 N910H that comes with bloatware, since i dont want to root my device because of warranty issues i tried installing this rom N910HXXU1ANK5_N910HUWA1ANK5_PGU with odin wich acording to sammobile its compatible with my note 4, but in odin i get this error:
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1ANK5_N910HUWA1ANK5_N910HXXU1ANK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I read that i could fix the problem by flashing a pit file and checking the re-partition option in odin but the only pit file i could find was for the N910C, so can i use it? if not how can i get the N910H pit file? i have the stock rom that came with the phone.
Right now i cant boot up my note, i get a screen with a yellow warning sign that says FIRMWARE UPGRADE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRIED AGAIN, did that but it doesnt work, kies doesnt recognise my phone lol
Try flashing again with a different version of Odin. Sometimes it helps.
Also remove battery for a minute or so before trying to flash. Sometimes this helps.
Never tick repartition. Just leave the things that are already ticked and don't tick anymore items.
Don't flash N910C partition on N910H. Don't flash N910C firmware with odin on N910H because it will include modem etc which is not compatible with your device.
Good luck and don't worry, you should be able to get out of it pretty easily.
It didnt work, weird right acording to sammobile its supposed to be the same rom just without bloatware, after reading your reply i end up flashing the copy i had of the stock rom so i just can use my phone again ☺ thank you.
I read on some thread you dont include modems on your roms, i might just root and tried some custome roms already lol do you happend to know if i where to flash back to stock after having custom roms, if i can still update with official roms with odin?
Sent from my Galaxy NOTE 4
pikul said:
It didnt work, weird right acording to sammobile its supposed to be the same rom just without bloatware, after reading your reply i end up flashing the copy i had of the stock rom so i just can use my phone again ☺ thank you.
I read on some thread you dont include modems on your roms, i might just root and tried some custome roms already lol do you happend to know if i where to flash back to stock after having custom roms, if i can still update with official roms with odin?
Sent from my Galaxy NOTE 4
Click to expand...
Click to collapse
You can download roms from sammobile. Maybe the one you got was just a bad download as yes, any region should work if it is for the same device eg. N910H to N910H.
Yes my roms don't include modem. You can get the latest for your device after flashing the rom from post #3 in my thread. Latest kernels also in post #4.
A simple odin flash of stock firmware should get you back to stock
It seems your issue is regional. I have seen some cases where other region ROM not allowed to flash using odin and classically it fails at cache or Hidden (your logs suggest it failed at hidden)
So download your device ROM with same region as it was there when you purchase. If you don't know try different one and one should get success.
Yeah i guess thats the problem, mine came with a rom from trinidad, so to remove all the bloatware i tried to flash a rom for my country that has none, of course for the same model N910H but it just didnt work, anyways gonna root later and try customs
Sent from my Galaxy NOTE 4
Related
Hey everyone - long time reader first time poster.
I'm having an issue with my SM-N9005. I had rooted it, and was running OmegaRom V21 (i think). I am now trying to flash it back to stock 4.4.2 XSA firmware and am receiving a FAIL! message in Odin 3.07 after HIDDEN is displayed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005XSAENE1_N9005XXUENE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
I have been able to successfully flash to the leaked Polish 4.4.2 firmware using ODIN 3.09 and extracted .pit file, but when i try and then reflash the STOCK XSA firmware it is showing FAILED! again...
Any suggestions?
Cheers
James
is the omega rom 4.4.4 or is it 4.4.2
Powerplayer1025 said:
is the omega rom 4.4.4 or is it 4.4.2
Click to expand...
Click to collapse
It was 4.4.2
hmm you might have a bad chord or you might need to run odin as admin or you might have a bad download
---------- Post added at 08:11 AM ---------- Previous post was at 08:09 AM ----------
did you try to turn your phone all the way off leave the phone off for 15 seconds then boot into download mode and flash it. or are you putting the file in the wrong spot
Powerplayer1025 said:
hmm you might have a bad chord or you might need to run odin as admin or you might have a bad download
Click to expand...
Click to collapse
i have tried all those things. i'm able to flash with the leaked Polish 4.4.2 firmware.. and have downloaded the firmware a few times, from SamMobile and other mirrors. The leaked Polish firmware is the only way i can get into the phone, otherwise it displays emergency firmware recovery messages, but isn't detected in Kies...
I'm really confused actually lol
try a different odin maybe sometimes that seems to help the problem. maybe even reboot the laptop
iamjamoo said:
Hey everyone - long time reader first time poster.
I'm having an issue with my SM-N9005. I had rooted it, and was running OmegaRom V21 (i think). I am now trying to flash it back to stock 4.4.2 XSA firmware and am receiving a FAIL! message in Odin 3.07 after HIDDEN is displayed.
...
I have been able to successfully flash to the leaked Polish 4.4.2 firmware using ODIN 3.09 and extracted .pit file, but when i try and then reflash the STOCK XSA firmware it is showing FAILED! again...
Any suggestions?
Cheers
James
Click to expand...
Click to collapse
I have a feeling your partitioning scheme is indeed different - what specific model was the N9005 originally? You might need to first install the oldest 4.4.2 you find for that original model.
xclub_101 said:
I have a feeling your partitioning scheme is indeed different - what specific model was the N9005 originally? You might need to first install the oldest 4.4.2 you find for that original model.
Click to expand...
Click to collapse
hmm it was an Australian model, i thought it would be an issue with partitioning so i tried to use the pit file from the polish firmware and flash the xsa firmware but that also failed..
so the oldest 4.4.2 you think? I'll give that a go
Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!
If you can access download mode, your phone is not bricked.
Simply download last firmware for your model from sammobile, and flash it with odin...
ok thanks, will do.
But how do I safely root the note 4 5.1.1? CF-Autoroot isnt compatible
Ok, I just finished download a stock rom for my phone (.tar.zip) but when I click start in Odin it always fails for some reason...<ID:0/003> Can't open the serial(COM) port.
Edit: tried a different port now it fails at:
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
What can I do?
Does upgrading via Kies will result in losing all data?
I'm working on this issue for hours now but I'm stuck
Using Odin it will fail at sboot.bin
And kies doesnt recognize my note 4
Here's the log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone: SW REV. CHECK FAIL, DEVICE 2, BINARY 1
Nixdax said:
Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!
Click to expand...
Click to collapse
Restore your backup in recovery
What is your exact model, G or F, what? You download the ROM from sammobile with your exact model no., and then flash.
It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........
Never heard about the H version before! Anyway, make sure you are flashing the correct Xposed, that is Wanam's, but Arter's, and read the installation instructions closely.
Nixdax said:
It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........
Click to expand...
Click to collapse
Please, search before flash.
H model is with Exynos processor.
http://www.sammobile.com/firmwares/database/SM-N910H/
Hi Guys,
Ok this is my problem, the phone is a Samsung Galaxy S4 LTE SGH-I337 ATT Unlocked i bought a year ago here in Argentina, the phone came with the Android 5.0.1 "OC3" firmware. The phone is a refurbished one.
Arount six month ago, the phone started a weird problem, it cannot make o receive calls (it rings actually, but you cannot hear the caller and the caller cannot hear me).
This happend after i pass the phone turned on in the airport scanner (i always turned it off before), so initially i though of some kind of related problem with that.
After researching online, my conclusion was the problem is related to the common sim card tray problems stated in another post here.
So i got a new phone and i tought to flash another android version to change the modem, because i really need to sell the S4.
This is the steps i do
First i root the phone with the Wondershare mobile trial app. I seems to work fine.
Then i load Odin 3.09 (is not my first Samsung, i have flashed another friends Samsungs before) and i try the methods for rolling back to NB1 and go to OC4/OK2, but none works!
All flashes stops in recovery.img write failed. So i read some more and yes my bootloader is locked and now i have a softbricked phone.
I try with Kies, nothing. Now i just want it to came back to life again.
I know i shound read more, and its my fault.
Its there any way to unbrick my phone?
Please Help!
Thanks
This is the tl;dr
Samsung SGH-I337 ATT Unlocked Refurbished
Android 5.0.1 (USB Debugging On)
I337UCUGOC3
LRX22C.I337UCUGOC3
KNOX 2.3
Rooted with Wondershare Mobile Go Trial
Try to flash "NB1 Full Rootable", fails at recovery.img
Can go to Download, but doesnt go to Recovery
Doesnt boot, says recover with Kies
Kies doesnt allow to recover
Tried anothed methods, always says fails write o complete failed when write.
I use the back USBs from my PC, all USB 2.0, and its a "good" data cable.
I use Odin 3.09, and Odin 3.10.6
I use Kies 2 and Kies 3
I try to flash recovery-mj6.tar.md5 also (i found in another post here), always fails in write
I use 1.5.61 Samsung USB Drivers
I Use Windows 7 32 bits
Please Help!
Thanks
Sounds like you have a bad download of the NB1 firmware. Try downloading it again and flashing it again with Odin 3.09 or 3.07. I have used both versions of Odin on my i337 AT&T GS4 and I've had your exact problem before when I didn't get all the parts of the NB1 firmware in their places. I've never successfully flashed out of a soft brick with Kies, just Odin.
Hi, thanks for your response.
I have 2 NB1 tar.md5 files, both download from links i encounter here in this forum
Code:
07/03/2014 17:26 2.598.543.468 ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5
18/06/2014 11:04 2.598.676.551 I337UCUFNB1_TWRootable_Full_Odin.tar.md5
I just tryed again and now is stuck in system (i dont know why, yesterday always got stuck in recovery.img, maybe because i flash recovery_mj6.tar last night? idk)
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUFNB1_TWRootable_Full_Odin.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> tz.mbn
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> persdata.img.ext4
<ID:0/007> system.img.ext4
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Still only boot to download mode.
I will to find other odin versions.
Thank you again
Succefully flashed NB1 !!!
I use the PC from work, Windows 7 64 bit Ultimate, USB 2.0 (as COM3) in the back, same data cable.
I use Odin 3.12.3 (found it here)
The phone is alive!
Thanks all.
Hello,
i have a Samsung Galaxy A5 (2015) SM-A500X Live Demo Unit.
It came with it's stock Kitkat ROM and does not find any updates, but i know that there is a 6.0 update for this phone. So i tried to modify the DBT-Germany Stock 6.0 that i downloaded with those guides:
https://www.reddit.com/r/oculus/comments/40rsdv/if_you_get_a_samsung_s6_live_demo_unit_store/
https://forum.xda-developers.com/showthread.php?t=2349948
In the first guide i could only remove the "modem.bin" but both the other files are not in the stock Rom .tar file. i tried to Flash it anyway, but Odin gave me an error that it couldn't Flash one part, the phone showed some error in download mode "couldnt Flash secured" or something like that. i think the Partition is missing for a specific file?
So i used the second guide and removed EVERYTHING besides the files which are Name in the guide (like stated there), the Flash in Odin went fine, but the phone only shortly Shows the Splashscreen and then Comes back to download mode which tells "Could not do normal boot"
Then i began to Panic, because recovery was dead too...
So i could save the phone, i flashed the twrp recovery, i could atleast go into a working recovery and then i was able to restore the backup of the stock Rom (glad i did this one)
So the phone is working again, at least. But could somebody tell me what i have to do to Flash the 6.0 stock Rom?
Or: Do i really Need to do this since i only want to use lineageos (Nougat), but in the guide it is telling me, that i Need to have at least the marshmallow bootloader and modem. i know that a LDU has no modem but what about the bootloader?
I am very sorry for my bad english! :angel:
I would really appreciate some help...
Thanks a lot!
I've looked around, and there's only a Germany DBT rom for the SM-A500FU:
http://updato.com/firmware-archive-select-model?record=61451820219F11E7963AFA163EE8F90B
You could try that one out, rather than trying to modify some other rom.
Thanks for the answer, this was also the ROM i modified, but if i flash it unmodified with Odin, i always get this log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone:
"Secure Check Fail: aboot"
It seems that the bootloader is somewhat locked?
I can still flash a recovery (TWRP) and this is working, the kitkat stock Rom is also working (from backup in TWRP) but i cant get anything else to work, especially lineageOS doesnt boot :/
EDIT:
Slowly i begin to understand: https://techusall.com/solved-secure-check-fail-aboot-error-flashing-firmware/
If i am right, my baseband/bootloader ist not compatible with the normal A500FU so i can't update it?! So there's no solution to this Problem?!
Ok, i think this is the end... I even tried to flash the 4.4 Stock ROM for A500FU but it still get the damn aboot.mbn auth error. I think the bootloader on demo phones is somewhat locked and can't be flashed at all, so i am stuck with Kitkat Bootloader preinstalled. So i only can flash 4.4 ROMs i think, this is sad :/
Especially because there is official 6.0 for this phone.
I still have the same Problem. Does some dev have some advanced Knowledge of those Errors?
It would be okay if it's simply not possible, so i can sell the unit again, but i would like to be sure to not waste an opportunity to use this nice device.
Help me please, I locked myself out by trying to update my s8 from cre8 to cre9 like a retard and bricked my phone. Won't let me ODIN back to CRD4 as its bootloader 3.
Any solutions other than waiting for them to release an odin copy of bootlader 4?
I guess you can't flash twrp ?
klip1 said:
Help me please, I locked myself out by trying to update my s8 from cre8 to cre9 like a retard and bricked my phone. Won't let me ODIN back to CRD4 as its bootloader 3.
Any solutions other than waiting for them to release an odin copy of bootlader 4?
Click to expand...
Click to collapse
full flash cred etc with odin. to solve
Cant flash twrp cause model 950u, and WHAT DO YOU MEAN BY FULL FLASH CRED. i've tryed everything, can you break it down step by step?
I tryed installing roms etc using cosby odin and others but no dice
I've tryed samfirm's latest, i've tryed installing everything even stock firmware but of course the binary is 4, won't ttake anything less
can you give me links?!
i know how to use odin, flashing firmware etc
klip1 said:
I tryed installing roms etc using cosby odin and others but no dice
I've tryed samfirm's latest, i've tryed installing everything even stock firmware but of course the binary is 4, won't ttake anything less
can you give me links?!
i know how to use odin, flashing firmware etc
Click to expand...
Click to collapse
Here, try this version of odin. It may work, it may not, but let me know if it does let you downgrade or flash whatever revision your trying to flash.
Good Luck!!
scotteb said:
Here, try this version of odin. It may work, it may not, but let me know if it does let you downgrade or flash whatever revision your trying to flash.
Good Luck!!
Click to expand...
Click to collapse
OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Erase...
<ID:0/007> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
CANT SOMEONE PUT SOMETHING TOGETHER TO ODIN ME BACK?
SOMEONE PLEASE HELP! IS THERE ANYWAY SOMEONE CAN CHOP AND PIECE TOGETHER AN ODIN WORKING FLASHFILE THAT LIKE INCLUDES THE 4th bootloader but rest regular files?
klip1 said:
SOMEONE PLEASE HELP! IS THERE ANYWAY SOMEONE CAN CHOP AND PIECE TOGETHER AN ODIN WORKING FLASHFILE THAT LIKE INCLUDES THE 4th bootloader but rest regular files?
Click to expand...
Click to collapse
Don't know if you are still bricked, but there is now a bootloader 4 ODIN file available here: https://forum.xda-developers.com/showpost.php?p=76819577&postcount=3603