Database Users

SGS4 won't boot....

Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx

vivelafrance said:
Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx
Click to expand...
Click to collapse
where odin failed exactly?
did you try changing usb port? kies totally disabled? original usb cable?

thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.

vivelafrance said:
thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.
Click to expand...
Click to collapse
one more thing, remove battery for a couple of minutes, then try with odin 1.85

All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.

vivelafrance said:
All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.
Click to expand...
Click to collapse
i dont know if flashing pit file along with the firmware will work

yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?

vivelafrance said:
yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?
Click to expand...
Click to collapse
pit file is flashed with the firmware. choose the right pit for your device! re-partition will be checked automatically when you select the pit file.

still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...

vivelafrance said:
still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...
Click to expand...
Click to collapse
did you flash firmware with the pit file at same time and didnt work?
almost you did everything.
try to change computer if available.

no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help

vivelafrance said:
no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help
Click to expand...
Click to collapse
If you haw acess t dawnload mod you are nhot bricked pleas go and try other pc
Sent from my GT-I9505 using xda premium

First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx

this is surely NOT a mobile issue if you can enter into download mode.
i had the exact issue a month ago when i had note2.
if you can't try it on another pc, try :
1) uninstall skies completely
2) unisnstall usb drivers
3) reboot the pc
4) connect your s4 in download mode to your pc.
5) let your pc install freah usb drivers
6) start odin and flash
7) if still you get the same error download a different verison of the official rom and try flashing.
i followed the above procedure couple of times and was finally able to install the rom. the issue is either with the drivers or the rom.
Sent from my GT-I9500 using xda app-developers app

bricked for sure
vivelafrance said:
First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx
Click to expand...
Click to collapse
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.

Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app

Bluetoth10 said:
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.
Click to expand...
Click to collapse
thnx. yeah, flashing the PIT actually always worked but it was the only thing that worked! lol

DenmarkRootN00b said:
Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.

vivelafrance said:
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.
Click to expand...
Click to collapse
good luck at least i just thought it would work by doing it in recovery but yeah... warranty is better.. if not.. then keep trying if they wont replace it

ok I FINALLY could access the stock recovery, did a full wipe and everything is back in order now, works perfectly.
THANKS to all!

[Q] How to root after the latest update ?

Hi all,
I've just updated my Note3 SM-N9005 via kies to Build number N9005XXUDMK2 and now I can't flash root, It fails every time...
My version is N9005XXUDMJ7 and my build number is N9005XXUDMK2.
I don't know if it has something to do with it, but when I enter download node I see a gray line saying: "Write protection: Enabled".
Can anyone please tell me how can I gain root access again ?
I'm tring to flash this file: "CF-Auto-Root-hlte-hltexx-smn9005.tar.md5" with "Odin3 v3.09.exe"
which I found in this site: http://true-android.blogspot.co.il/2013/12/root-n9005xxudmk2-galaxy-note-3-sm.html

frliran said:
Hi all,
I've just updated my Note3 SM-N9005 via kies to Build number N9005XXUDMK2 and now I can't flash root, It fails every time...
My version is N9005XXUDMJ7 and my build number is N9005XXUDMK2.
I don't know if it has something to do with it, but when I enter download node I see a gray line saying: "Write protection: Enabled".
Can anyone please tell me how can I gain root access again ?
I'm tring to flash this file: "CF-Auto-Root-hlte-hltexx-smn9005.tar.md5" with "Odin3 v3.09.exe"
which I found in this site: http://true-android.blogspot.co.il/2013/12/root-n9005xxudmk2-galaxy-note-3-sm.html
Click to expand...
Click to collapse
Can you paste the Odin log after it fails?
Also you may have the new updated CF Root which has been adapted for KitKat and doesn't work with 4.3 anymore.

Here is the log from odin
radicalisto said:
Can you paste the Odin log after it fails?
Also you may have the new updated CF Root which has been adapted for KitKat and doesn't work with 4.3 anymore.
Click to expand...
Click to collapse
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I even tries using the same root file I did the first time I rooted my phone...

frliran said:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I even tries using the same root file I did the first time I rooted my phone...
Click to expand...
Click to collapse
Gave the same error using the original file you used from the first time? -- It is possible it doesn't like MK2, however it should work because I used it fine when I was on it.. Try re-downloading it again and trying again (I don't have it anymore, only the KK version )

Here is the log of the first file
radicalisto said:
Gave the same error using the original file you used from the first time? -- It is possible it doesn't like MK2, however it should work because I used it fine when I was on it.. Try re-downloading it again and trying again (I don't have it anymore, only the KK version )
Click to expand...
Click to collapse
The previous log was from the new file I downloaded today.
This is the log from "Odin3 v3.07" using the first file I rooted my phone with:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE...Can you please help me to re-root my phone.
(And if you can, please send me a link to download root for the KitKat version so that I can re-root it when the update will rollout in my country.)

Just to double check -- you are flashing it via the PDA option correct? and you have unrar'd it so you can see the tar.md5 file ?

yes
radicalisto said:
Just to double check -- you are flashing it via the PDA option correct? and you have unrar'd it so you can see the tar.md5 file ?
Click to expand...
Click to collapse
Yes I am.
But in odin 3.9 there is AP and not PDA.
But I tried both in both odin versions: 3.7 and 3.9.
In odin 3.7 I am using PDA, and in odin 3.9 I am using AP.

Hmm I am stumped I'm afraid. Usually re-flashing it normally works. See if anyone else will chime in and know the answer.

)-;
radicalisto said:
Hmm I am stumped I'm afraid. Usually re-flashing it normally works. See if anyone else will chime in and know the answer.
Click to expand...
Click to collapse
Do you think doing "Wipe cache partition" can fix it ? I don't realy knkow what it means...
Can you please send me a download link for rooting after updating to KitKat ? So I could use it when the update rolls out in my country

frliran said:
Do you think doing "Wipe cache partition" can fix it ? I don't realy knkow what it means...
Can you please send me a download link for rooting after updating to KitKat ? So I could use it when the update rolls out in my country
Click to expand...
Click to collapse
When it rolls out it may be a different version of KK than is currently compatible with CR Root. Better waiting til it comes out then seeing what is available.
**[Side Note... If you want KK now you can flash the Official XEO version depending on your Model (IF Hong Kong then it won't work) - and you can root on that without issue after flashing, but you cannot go bac to 4.3 again]**

hmmm
radicalisto said:
When it rolls out it may be a different version of KK than is currently compatible with CR Root. Better waiting til it comes out then seeing what is available.
**[Side Note... If you want KK now you can flash the Official XEO version depending on your Model (IF Hong Kong then it won't work) - and you can root on that without issue after flashing, but you cannot go bac to 4.3 again]**
Click to expand...
Click to collapse
I prefer to wait till an official KK will roll out and update via kies.
Can you please tell me if I do "Wipe cache partition" will fix the root failure probloem ?
I don't realy know what this wipe does...

Solved it (-:
frliran said:
I prefer to wait till an official KK will roll out and update via kies.
Can you please tell me if I do "Wipe cache partition" will fix the root failure probloem ?
I don't realy know what this wipe does...
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem

It's always something so simple, Not turned activation lock on myself so never had an issue with it. Glad you got sorted thouugh.

Thank you very much for your help
radicalisto said:
It's always something so simple, Not turned activation lock on myself so never had an issue with it. Glad you got sorted thouugh.
Click to expand...
Click to collapse
Yes (-:
Thanl you very much for your help and consideration

Note 3 SM-N9005 Firmware Issue & Device Recognised As 'Samsung GT-S5690'

Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John

Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Click to expand...
Click to collapse
hello. have you tried another version of odin? im sure someone can help you revive your phone

Mine did the same thing,put it into download mode and flash cwm recovery and it'll come to life..

hypnodaz said:
Mine did the same thing,put it into download mode and flash cwm recovery and it'll come to life..
Click to expand...
Click to collapse
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?

Mamba25 said:
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Click to expand...
Click to collapse
You will have to flash stock firmware 4.4 before your phone will work again. Simply flashing cwm will get you to cwm recovery but not a working phone.
---------- Post added at 09:37 AM ---------- Previous post was at 09:31 AM ----------
Mamba25 said:
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Click to expand...
Click to collapse
Have you tried using Odin V3.09 to flash 4.4?

hey_joe said:
You will have to flash stock firmware 4.4 before your phone will work again. Simply flashing cwm will get you to cwm recovery but not a working phone.
Click to expand...
Click to collapse
Hi, I have found a tutorial on flashing ClockworkMod Recovery v6.0.4.5 but it states:
"Must enable USB Debugging first" and also "Must let Reactivation lock off first", is this absolutely necessary as I can't access my phone, let alone its settings? Can I still proceed with installing ClockworkMod Recovery?

Mamba25 said:
Hi, I have found a tutorial on flashing ClockworkMod Recovery v6.0.4.5 but it states:
"Must enable USB Debugging first" and also "Must let Reactivation lock off first", is this absolutely necessary as I can't access my phone, let alone its settings? Can I still proceed with installing ClockworkMod Recovery?
Click to expand...
Click to collapse
Don't follow that one.
Go here and download the right file for your phone's model, put phone in download mode and flash using odin in ap/pda slot.
Btw, have you tried flashing 4.4 using odin v3.09?

When odin gives you the fail message technically you've already flashed the stock, but for some reason odin doesn't recognise it as a pass. .leave your phone plugged in, reset odin, put your phone into download phone and then flash recovery. . Hey presto your phone will wake up..

hypnodaz said:
When odin gives you the fail message technically you've already flashed the stock, but for some reason odin doesn't recognise it as a pass. .leave your phone plugged in, reset odin, put your phone into download phone and then flash recovery. . Hey presto your phone will wake up..
Click to expand...
Click to collapse
I don't think this is the case because when I first tried flashing from 4.3 to 4.4.2 it tried for a few seconds then failed and been stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“ despite resetting Odin and going back into download mode, tried reflashing but keep getting the 'FAIL' (logs posted in original first post).
Is there any reason why my phone is being detected as 'Samsung GT-S5690' in MobileGo? I'm thinking if Kies could detect it as the Note 3 again my problems would be solved.
I haven't tried Odin v3.09 because to be honest I thought the firmware file once extracted as a RAR file could only be read by Odin v3.07 is that not the case?
Soz everyone

Mamba25 said:
I haven't tried Odin v3.09 because to be honest I thought the firmware file once extracted as a RAR file could only be read by Odin v3.07 is that not the case?
Soz everyone
Click to expand...
Click to collapse
No it's not.

Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Click to expand...
Click to collapse
looks like u r trying to flash 4.3 & 4.4 one after one, now dont try 4.3 at all, make sure kies is not running in baground, disable antivirus if any.

I had the the same issue with kies myself, tried every trick in the book before I tried the method I mention above.. maybe it's an issue with the phone itself, or a certain batch of phones?

Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
...
Click to expand...
Click to collapse
The writing of stock 4.3 fails since your bootloader was updated by your failed attempt. You will probably never be able to write a 4.3 stock image.
The writing of 4.4 NB1 fails since probably it is for a slightly different region with a slightly different partitioning scheme. Ideally install the 4.4 for your specific model/region. If that fails you might need to write some 4.4 with repartition - there are some threads around (I think also the Hong-Kong version had serious problems with 4.4 because of that).

xclub_101 said:
The writing of 4.4 NB1 fails since probably it is for a slightly different region with a slightly different partitioning scheme. Ideally install the 4.4 for your specific model/region. If that fails you might need to write some 4.4 with repartition - there are some threads around (I think also the Hong-Kong version had serious problems with 4.4 because of that).
Click to expand...
Click to collapse
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks

Mamba25 said:
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Click to expand...
Click to collapse
There is AP in 3.09 in place of PDA.

Mamba25 said:
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Click to expand...
Click to collapse
I don't think there is an easy way to see what the original version was as long as you can no longer boot the phone. I think the EU model is generally listed as N9005ZWE while the HK is N9005ZKA and that might be written somewhere on the box. Also it might be a different partitioning model even if it is not a Hong-Kong model.

xclub_101 said:
I don't think there is an easy way to see what the original version was as long as you can no longer boot the phone. I think the EU model is generally listed as N9005ZWE while the HK is N9005ZKA and that might be written somewhere on the box. Also it might be a different partitioning model even if it is not a Hong-Kong model.
Click to expand...
Click to collapse
Could you please let me know if the update be completed successfully. I have the same problem so want to know the steps of the
same. Please help me.

madsus said:
Could you please let me know if the update be completed successfully. I have the same problem so want to know the steps of the
same. Please help me.
Click to expand...
Click to collapse
I've taken the phone to a repair shop recommended by Samsung themselves, they've had it a week now and I rang yesterday and they said it is the first Hong Kong Note 3 they've received and are waiting to hear from Samsung as to how to repair it. BIG YAWN!
Will keep you posted - miss my phone

Note 3 SM-N9005 firmware upgarade issue
Hi , i am having the same problem in my Note 3 i upgraded phronesis rom and after the phone was not detected in computer. so tried to flash custom kitkat rom again then it got disconnected and then showing error as firmware upgrade issue,
tried to download firmware and update by Odin, tired cmw recovery and tried many firmwares, Odin shows Failure and Kies dosent shown code or phone in emergency recovery , all ways failed, is it possible to make the phone work normal.

[Q] AT&T Galaxy S4 Soft bricked phone-can't ODIN restore

I have been searching threads for 6 hours, but haven't found anything conclusive.
I rooted my phone a while back, but today I decided to install a new custom ROM. I backed up the ROM to my external SD and installed the new one through safestrap. However, when I tried to reboot, I just got stuck on a screen that says samsung and has an open lock.
I am able to get into download mode, but not into recovery. After I boot into download mode, it says write protection:enabled (not sure that is normal, but I thought I would mention it). I open up Odin and the drivers seem to load fine. I have tried a a few versions of ODIN and two different Stock ROMs, but it fails every time. On my phone, after it fails, I get a message that says SW Rev. Check Fail: fused 2, binary: 1.
In ODIN, I get the following:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me? I'm getting kind of desperate.

Have you tried another USB cable?.

I have actually. The original cable and just another one I had. Also, tried it on 3 computers.

Should I be loading a PIT file? some places say to do it and others say not to.

marcymtz92 said:
Should I be loading a PIT file? some places say to do it and others say not to.
Click to expand...
Click to collapse
The problem is you're trying to flash mdl firmware and you're not on that version. It looks like you're on mf3. There is no Odin flashable mf3 firmware so I'd suggest you flash the nb1 tar file. See the general forum for the file. http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app

You are freaking amazing. That file totally worked. Thanks so much.

marcymtz92 said:
You are freaking amazing. That file totally worked. Thanks so much.
Click to expand...
Click to collapse
Glad you got it working
Sent from my Nexus 5 using XDA Free mobile app

Gs5 verizon soft bricked! Urgent!

Hi,
I have a SAMSUNG GALAXY S5 VERIZON and I treid to restore it to its stock rom using ODIN.
I have used every version of odin and I keep getting the same message:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANCG_G900VVZW1ANCG_G900VVRU1ANCG_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried multiple PC's multiple cables and multiple STOCK MD5 files.
I am Able to get to download mode and recovery boot.
I have tried almost every troubleshoot posted online so far.
On download screen I get SW REV CHECK FAIL: [aboot]Fused 2 > Binary 1
URGENTLY NEED HELP!
Thanks guys

Need to know what build you were on before you attempted all of this. If you were on BOE1 or BOG5, you cannot ODIN back to a previous build. You will have to ODIN the same build you were on when you started this.

Most likely I had one of the two. I'll try to odin to same build.
My phone was on Android 5.1.1 stock.

YES! It worked. Thank you so much! I really appreciate taking the time to help me. Good to know people are still willing to help out!

Hi I am having the same problem but I cannot find the stock file for 5.1 or 5.0.1. or whatever the newest version is if anyone could help out

Dark Karas said:
Hi I am having the same problem but I cannot find the stock file for 5.1 or 5.0.1. or whatever the newest version is if anyone could help out
Click to expand...
Click to collapse
Here you go. This is factory stock, it will locked your bootloader.
http://forum.xda-developers.com/verizon-galaxy-s5/general/g900vvru2bog5-factoryodintarimage-t3179527

I am having the same issue as the OP but mine is 5.0 and was BOG5. Can you please help me fix it or explain to me how I can? I am a noobie at all of this.

Hollieanne said:
I am having the same issue as the OP but mine is 5.0 and was BOG5. Can you please help me fix it or explain to me how I can? I am a noobie at all of this.
Click to expand...
Click to collapse
If you're having the same problem, the solution is the same: Use Odin to flash the BOG5 system restore image that was linked in the post above yours.