Database Users

SGS4 won't boot....

Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx

vivelafrance said:
Hi guys,
My SGS4 won't boot anymore. At all.
I can (with difficulty) access my custom recovery menu (TWRP 2.5.1) and the download menu.
But whatever I'm trying to flash using ODIN from download menu, it fails! Whether it's the current ROM, official UK BTU ROM, stock recovery etc... So can't use Odin.
Can't put anything on the device either as I can't boot. When I use the "mount USB" from the TWRP menu, my PC doesn't recognize the phone so I can't put any ZIP on the phone that I could install from TWRP.
This happened when I used Triangle Away to reset the counter from 1 to 0....
I'm afraid my phone is bricked (although it's a temp phone and will be getting mine in 2 days), but I wanted to be sure that I didn't forget to do anything....
ANy ideas how to make this work pls?
thnx
Click to expand...
Click to collapse
where odin failed exactly?
did you try changing usb port? kies totally disabled? original usb cable?

thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.

vivelafrance said:
thnx for your help.
- Kies is definitely not running, stopped all services and processes
- Using samsung USB cable
- Tried on several USB ports of my PC
- Using Odin 3.4
- this is what I can read in ODIN after it has failed:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDD_I9505VODAMD9_I9505XXUAMDD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Thnx again.
Click to expand...
Click to collapse
one more thing, remove battery for a couple of minutes, then try with odin 1.85

All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.

vivelafrance said:
All of these were really good ideas, but I'm afraid none of them work!
Same error message, it seems it can't write on the damn phone. I tried to reflash TWRP, the green bar went further but at the end, same thing, fails.
Click to expand...
Click to collapse
i dont know if flashing pit file along with the firmware will work

yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?

vivelafrance said:
yeah that's exactly what I was thinking, after clickingon your "unroot, back to stock" link in your signature...
So can I flash the firmware + Pit at the same time or should I flash pit first and then the ROM?
Click to expand...
Click to collapse
pit file is flashed with the firmware. choose the right pit for your device! re-partition will be checked automatically when you select the pit file.

still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...

vivelafrance said:
still doesn't work unfortunately, don't know what 's happening....
I flashed PIT file alone, it worked fine.
Tried to install anything else, it fails again, all the time...
Click to expand...
Click to collapse
did you flash firmware with the pit file at same time and didnt work?
almost you did everything.
try to change computer if available.

no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help

vivelafrance said:
no I flashed the pit file alone, cause if I flash the pit and PDA at the same time, it doesn't work either:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAME2-PRE-ROOTED-DEODEX-SUPER-SLIM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
ok well, thnx anyway for your help
Click to expand...
Click to collapse
If you haw acess t dawnload mod you are nhot bricked pleas go and try other pc
Sent from my GT-I9505 using xda premium

First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx

this is surely NOT a mobile issue if you can enter into download mode.
i had the exact issue a month ago when i had note2.
if you can't try it on another pc, try :
1) uninstall skies completely
2) unisnstall usb drivers
3) reboot the pc
4) connect your s4 in download mode to your pc.
5) let your pc install freah usb drivers
6) start odin and flash
7) if still you get the same error download a different verison of the official rom and try flashing.
i followed the above procedure couple of times and was finally able to install the rom. the issue is either with the drivers or the rom.
Sent from my GT-I9500 using xda app-developers app

bricked for sure
vivelafrance said:
First, thanks for the info that if I can access the download mode, then the phone is not bricked, I didn't know that, so thanks.
And yes, you were both right, I plugged my phone into my laptop and it worked! THANK YOU.
So the next question is: What could be the issue on my PC? It's not Kies cause it's not installed, and I already uninstalled and reinstalled the Samsung Drivers....
thnx
Click to expand...
Click to collapse
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.

Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app

Bluetoth10 said:
expirienced exactly same situation with i9300. Able to get to recovery but failed to flash. Tryed everything on PC and on the phone itself. You have to try different odin versions, but in my case it was NAND failure. If you failed to flash PIT your phone is for sure bricked. Sorry.
Got mainboard replacement in my case.
Click to expand...
Click to collapse
thnx. yeah, flashing the PIT actually always worked but it was the only thing that worked! lol

DenmarkRootN00b said:
Have you tried putting a rom on the sdcard with an adapter.. And then put it in the phone and flash the zip from recovery?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.

vivelafrance said:
no but good idea. Actually all the flashing work now, but I still can't boot into the phone! This is madness...
before I couldn't flash anything. Now, I flashed the original BTU ROM, Stock recovery but can't boot into recovery anymore, can't boot into the OS, the only thing that works is the download mode.
Will try to get the phone to a repair thing. I'm gonna try with samsung repair centre first cause the right ROM is installed (original) and the counter is at zero so should be fine with warranty.
Click to expand...
Click to collapse
good luck at least i just thought it would work by doing it in recovery but yeah... warranty is better.. if not.. then keep trying if they wont replace it

ok I FINALLY could access the stock recovery, did a full wipe and everything is back in order now, works perfectly.
THANKS to all!

Note 3 SM-N9005 Firmware Issue & Device Recognised As 'Samsung GT-S5690'

Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John

Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Click to expand...
Click to collapse
hello. have you tried another version of odin? im sure someone can help you revive your phone

Mine did the same thing,put it into download mode and flash cwm recovery and it'll come to life..

hypnodaz said:
Mine did the same thing,put it into download mode and flash cwm recovery and it'll come to life..
Click to expand...
Click to collapse
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?

Mamba25 said:
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Click to expand...
Click to collapse
You will have to flash stock firmware 4.4 before your phone will work again. Simply flashing cwm will get you to cwm recovery but not a working phone.
---------- Post added at 09:37 AM ---------- Previous post was at 09:31 AM ----------
Mamba25 said:
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Click to expand...
Click to collapse
Have you tried using Odin V3.09 to flash 4.4?

hey_joe said:
You will have to flash stock firmware 4.4 before your phone will work again. Simply flashing cwm will get you to cwm recovery but not a working phone.
Click to expand...
Click to collapse
Hi, I have found a tutorial on flashing ClockworkMod Recovery v6.0.4.5 but it states:
"Must enable USB Debugging first" and also "Must let Reactivation lock off first", is this absolutely necessary as I can't access my phone, let alone its settings? Can I still proceed with installing ClockworkMod Recovery?

Mamba25 said:
Hi, I have found a tutorial on flashing ClockworkMod Recovery v6.0.4.5 but it states:
"Must enable USB Debugging first" and also "Must let Reactivation lock off first", is this absolutely necessary as I can't access my phone, let alone its settings? Can I still proceed with installing ClockworkMod Recovery?
Click to expand...
Click to collapse
Don't follow that one.
Go here and download the right file for your phone's model, put phone in download mode and flash using odin in ap/pda slot.
Btw, have you tried flashing 4.4 using odin v3.09?

When odin gives you the fail message technically you've already flashed the stock, but for some reason odin doesn't recognise it as a pass. .leave your phone plugged in, reset odin, put your phone into download phone and then flash recovery. . Hey presto your phone will wake up..

hypnodaz said:
When odin gives you the fail message technically you've already flashed the stock, but for some reason odin doesn't recognise it as a pass. .leave your phone plugged in, reset odin, put your phone into download phone and then flash recovery. . Hey presto your phone will wake up..
Click to expand...
Click to collapse
I don't think this is the case because when I first tried flashing from 4.3 to 4.4.2 it tried for a few seconds then failed and been stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“ despite resetting Odin and going back into download mode, tried reflashing but keep getting the 'FAIL' (logs posted in original first post).
Is there any reason why my phone is being detected as 'Samsung GT-S5690' in MobileGo? I'm thinking if Kies could detect it as the Note 3 again my problems would be solved.
I haven't tried Odin v3.09 because to be honest I thought the firmware file once extracted as a RAR file could only be read by Odin v3.07 is that not the case?
Soz everyone

Mamba25 said:
I haven't tried Odin v3.09 because to be honest I thought the firmware file once extracted as a RAR file could only be read by Odin v3.07 is that not the case?
Soz everyone
Click to expand...
Click to collapse
No it's not.

Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Click to expand...
Click to collapse
looks like u r trying to flash 4.3 & 4.4 one after one, now dont try 4.3 at all, make sure kies is not running in baground, disable antivirus if any.

I had the the same issue with kies myself, tried every trick in the book before I tried the method I mention above.. maybe it's an issue with the phone itself, or a certain batch of phones?

Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
...
Click to expand...
Click to collapse
The writing of stock 4.3 fails since your bootloader was updated by your failed attempt. You will probably never be able to write a 4.3 stock image.
The writing of 4.4 NB1 fails since probably it is for a slightly different region with a slightly different partitioning scheme. Ideally install the 4.4 for your specific model/region. If that fails you might need to write some 4.4 with repartition - there are some threads around (I think also the Hong-Kong version had serious problems with 4.4 because of that).

xclub_101 said:
The writing of 4.4 NB1 fails since probably it is for a slightly different region with a slightly different partitioning scheme. Ideally install the 4.4 for your specific model/region. If that fails you might need to write some 4.4 with repartition - there are some threads around (I think also the Hong-Kong version had serious problems with 4.4 because of that).
Click to expand...
Click to collapse
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks

Mamba25 said:
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Click to expand...
Click to collapse
There is AP in 3.09 in place of PDA.

Mamba25 said:
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Click to expand...
Click to collapse
I don't think there is an easy way to see what the original version was as long as you can no longer boot the phone. I think the EU model is generally listed as N9005ZWE while the HK is N9005ZKA and that might be written somewhere on the box. Also it might be a different partitioning model even if it is not a Hong-Kong model.

xclub_101 said:
I don't think there is an easy way to see what the original version was as long as you can no longer boot the phone. I think the EU model is generally listed as N9005ZWE while the HK is N9005ZKA and that might be written somewhere on the box. Also it might be a different partitioning model even if it is not a Hong-Kong model.
Click to expand...
Click to collapse
Could you please let me know if the update be completed successfully. I have the same problem so want to know the steps of the
same. Please help me.

madsus said:
Could you please let me know if the update be completed successfully. I have the same problem so want to know the steps of the
same. Please help me.
Click to expand...
Click to collapse
I've taken the phone to a repair shop recommended by Samsung themselves, they've had it a week now and I rang yesterday and they said it is the first Hong Kong Note 3 they've received and are waiting to hear from Samsung as to how to repair it. BIG YAWN!
Will keep you posted - miss my phone

Note 3 SM-N9005 firmware upgarade issue
Hi , i am having the same problem in my Note 3 i upgraded phronesis rom and after the phone was not detected in computer. so tried to flash custom kitkat rom again then it got disconnected and then showing error as firmware upgrade issue,
tried to download firmware and update by Odin, tired cmw recovery and tried many firmwares, Odin shows Failure and Kies dosent shown code or phone in emergency recovery , all ways failed, is it possible to make the phone work normal.

[Q] N9005 Dubai Version bricked during update via Odin

Hi Everyone!
Can anyone helpe me with following trouble? I have a SM-9005 Dubai version.
I tried to flash lolipop 5.0 rom to my device via odin. but when installing system it said fails, even if i tried that several times the result is same. I used Odin 3.09 and then tried V1.85 after reading some suggestions for another guy in similiar situation. But unfortunately didn't help my case. on the device screen i see 3 lines of red messages saying :
UDC start
Volume size is too big 4620288<4718592
ODIN: Invalid ext4 image
and Odin messages:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I don't know what to do. Please help.
BR
FIRAT

is it locked to carrier?

When it fails on NAND write that shouldn't brick your phone because nothing on the device has been written by Odin. Is your device still working or are you just wondering how to flash Lollipop?

fuel3100 said:
is it locked to carrier?
Click to expand...
Click to collapse
Hi, no, It was sim free. Any sim could use.

speedyjay said:
When it fails on NAND write that shouldn't brick your phone because nothing on the device has been written by Odin. Is your device still working or are you just wondering how to flash Lollipop?
Click to expand...
Click to collapse
But when i switch on the device i always use the same screen. I can't do anything. Recover mode doesn't work too.
Well, i would like to flasg lolipop but sure my priority is to save the phone first. Then i can think about rom version.
So, what do you think about it ?

Softbricked While Downgrading

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1BOC4_G900VVZW1BOC4_CL3846539_QB4392815_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was trying to root the s5 by downgrading but ran into a slight problem. Everytime I start the phone it boots for 5 mins, then goes into stock recovery. I have tried multiple different stock roms and none seem to work. Any help would be awesome.

What version were you downgrading from?

I believe BOG5

ldeveraux said:
What version were you downgrading from?
Click to expand...
Click to collapse
BOG5 I believe. At first it was telling me that when I ever I tried to root it, it would fail and then on the screen this would pop up: SW Rev Check Fail : Fused 2 Binary 1. Now whenever I start up the phone it tells me that the update failed and I need to use verizon software repair assistant to fix it.

calebp123 said:
BOG5 I believe. At first it was telling me that when I ever I tried to root it, it would fail and then on the screen this would pop up: SW Rev Check Fail : Fused 2 Binary 1. Now whenever I start up the phone it tells me that the update failed and I need to use verizon software repair assistant to fix it.
Click to expand...
Click to collapse
Anything OE1 or newer (yours is newer) can't be downgraded

ldeveraux said:
Anything OE1 or newer (yours is newer) can't be downgraded
Click to expand...
Click to collapse
Is there a link to the original verizon firmware or what should I do?

calebp123 said:
Is there a link to the original verizon firmware or what should I do?
Click to expand...
Click to collapse
You can just flash your phone back with stock firmware you were previously on. You can search the development thread for it. Unless you took a backup before doing all this, that's what you would have done if you read first..

rooting galaxy s4 sgh i337

so i am trying to root my galaxy s4 sgh i337 that is the att model. i downloaded odin and activated usb debugging in the developer options. i am using cf auto root. so i select cf autoroot and connect my device. it shows a little blue bar when i connect my device but then when i click run odin stops at setup connection. how long should i have to wait here. and i have installed the latest drivers. uninstalled kies. i am using a brand new official samsung cable. and the device connects to my computer just fine and i can transfer data on it. why does odin get stuck on setup connection.

Does it say "Added" in Odin?

Yes

TGxLEGENDz said:
Yes
Click to expand...
Click to collapse
Did you put it in download mode ?

gosha98_ said:
Did you put it in download mode ?
Click to expand...
Click to collapse
Do i have to put the phone in download mode when i am just rooting it? I am not flashing a new rom to it yet

Yes
TGxLEGENDz said:
Do i have to put the phone in download mode when i am just rooting it? I am not flashing a new rom to it yet
Click to expand...
Click to collapse
every operation with odin like root or restoring stock need the phone in download mode.

gosha98_ said:
every operation with odin like root or restoring stock need the phone in download mode.
Click to expand...
Click to collapse
ok thank you so much i am now past the setup connection, but when i root it is failing every time in the same spot <ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Receive Response from boot-loader
<OSM> All threads completed. (succeed 0 / failed 1)
i am using cf autoroot. what option should i select when i load up odin, BL, AP, CP, or CSC

AP.

Strephon Alkhalikoi said:
AP.
Click to expand...
Click to collapse
ok now i am getting this when it fails
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also on the phone in the top left in red letters it says secure check fail
and can i ask what all those two letter abbreviations stand for

Where did you download CF auto roof?
TGxLEGENDz said:
ok now i am getting this when it fails
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1101)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
also on the phone in the top left in red letters it says secure check fail
and can i ask what all those two letter abbreviations stand for
Click to expand...
Click to collapse
//

gosha98_ said:
//
Click to expand...
Click to collapse
i dont remember exactly where i downloaded it but i have tried it from a couple places. is there a link to download it from xda?

gosha98_ said:
//
Click to expand...
Click to collapse
ok looked in my history and i downloaded it from here and got the correct version to match my device and android version
https://autoroot.chainfire.eu/
could the problem be that i have a locked boot loader? im not entirely sure i do but would that cause this issue? it is saying secure magiccode check fail on my device.

Do you know the code name of your device?
TGxLEGENDz said:
i dont remember exactly where i downloaded it but i have tried it from a couple places. is there a link to download it from xda?
Click to expand...
Click to collapse
Or maybe, do you know model? For example: s4 LTE qualcom is 9505, mine 9515.. Yours ?

gosha98_ said:
Or maybe, do you know model? For example: s4 LTE qualcom is 9505, mine 9515.. Yours ?
Click to expand...
Click to collapse
the model is the s4 sgh-i337 and it is from at&t it is running android 5.0.1

TGxLEGENDz said:
the model is the s4 sgh-i337 and it is from at&t
Click to expand...
Click to collapse
Did you get lollipop update ? 5.0.1 firmware ?

gosha98_ said:
Did you get lollipop update ? 5.0.1 firmware ?
Click to expand...
Click to collapse
i am not sure. i got the phone from my friend and it already had 5.0.1 on it.

TGxLEGENDz said:
the model is the s4 sgh-i337 and it is from at&t it is running android 5.0.1
Click to expand...
Click to collapse
CF auto root doesn't Support this phone. That's why odin failed. You can try to use " Kingroot " to root.

gosha98_ said:
CF auto root doesn't Support this phone. That's why odin failed. You can try to use " Kingroot " to root.
Click to expand...
Click to collapse
ok where can i go to learn how to use and download kingroot

TGxLEGENDz said:
ok where can i go to learn how to use and download kingroot
Click to expand...
Click to collapse
https://kingroot.net/wap . download it from here. Then install the apk and click root. Wait, probabily it will reboot your phone and then check with an app if you got the root access permission.

gosha98_ said:
CF auto root doesn't Support this phone. That's why odin failed. You can try to use " Kingroot " to root.
Click to expand...
Click to collapse
okay kingroot worked! thank you so much!!! will i be able to install a custom recovery, and ROM?