Database Users

[Q] Cannot unroot/unbrick my SM-N9005 on bobcat rom 4.4

Hi there....
i rooted my Note 3 LTE SM-N9005 and had it flashed with bobcat rom 4.4. then i had dropped my phone and having some issues with screen. Now i need to flash it with custom rom. I hope I've done everything as per instructions to odin the phone using the default stock rom N9005XXUDMJ7_N9005TMNDMK1_N9005XXUDMJ7_HOME.tar (Bought the phone from Dubai, UAE; my friend's phone is with the same firmware which was bought in the very same outlet)
But when i try to unroot it, everything goes good till finally the left upper box turns red and says "FAIL!" following is the progress i do get during unroot process.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005TMNDMK1_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> aboot.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
I don't have an idea on what should have gone wrong here. Tried not less than 10times using different Odin versions too, but still the result was same.
Guys, Please give me hand to get my phone back to life. I cannot boot my phone now. another custom rom in my internal memory but cannot boot into recovery either. What should i do? is there any other way to unroot/unbrick my precious (for me) mobile.?
Thanks in advance for all your time and effort put to save my ass.

Am not sure but i think you get this error because you are trying to downgrade from 4.4.2 to 4.3 that not working anymore on samsung at least for the mean time.
Go to sammobile and download the official kitkat (poland) then flash it via Odin
Sent from my SM-N9005 using Tapatalk

Dahdoul said:
Am not sure but i think you get this error because you are trying to downgrade from 4.4.2 to 4.3 that not working anymore on samsung at least for the mean time.
Go to sammobile and download the official kitkat (poland) then flash it via Odin
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks a lot for the instruction bro... going to download it... and will give the feedback when i try it...
thanks again.

mhrdeena said:
Thanks a lot for the instruction bro... going to download it... and will give the feedback when i try it...
thanks again.
Click to expand...
Click to collapse
No problem ? and make sure you download the unbranded firmware (Poland XEO)
check this thread
http://forum.xda-developers.com/showthread.php?t=2610444
Sent from my SM-N9005 using Tapatalk

delega cattrit
Dahdoul said:
No problem ? and make sure you download the unbranded firmware (Poland XEO)
check this thread
http://forum.xda-developers.com/showthread.php?t=2610444
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
yeah,I've selected the same. but seems like terrafile.co, the file hosting website is under maintenance right now. I will have to wait till they resume back to normal.

mhrdeena said:
yeah,I've selected the same. but seems like terrafile.co, the file hosting website is under maintenance right now. I will have to wait till they resume back to normal.
Click to expand...
Click to collapse
MEGA Link for you

[Q] Boot error

Hi guys,
Please help !
I have a I9505. My phone is stuck in boot with message "Firmware upgrade encountered an issue. Please select recovery mode in Kies ".
When I try Kies emergency recovery noting happens.
I tried to boot in custom recovery (I had TWRP) and no luck.
Download mod is working. I tried to install sock rom with odin (PDA - one tar.md5 file), but it fail.

chemarko said:
Hi guys,
Please help !
I have a I9505. My phone is stuck in boot with message "Firmware upgrade encountered an issue. Please select recovery mode in Kies ".
When I try Kies emergency recovery noting happens.
I tried to boot in custom recovery (I had TWRP) and no luck.
Download mod is working. I tried to install sock rom with odin (PDA - one tar.md5 file), but it fail.
Click to expand...
Click to collapse
If u hv nandroid backup. Try restoring it. It will return u to last stable condition of your phone

re: flash stock firmware
chemarko said:
Hi guys,
Please help !
I have a I9505. My phone is stuck in boot with message "Firmware upgrade encountered an issue. Please select recovery mode in Kies ".
When I try Kies emergency recovery noting happens.
I tried to boot in custom recovery (I had TWRP) and no luck.
Download mod is working. I tried to install sock rom with odin (PDA - one tar.md5 file), but it fail.
Click to expand...
Click to collapse
Most likely you tried to flash the wrong firmware/rom for your phone and that's why it failed.
Your best bet is to download the official stock firmware from http://SamMobile.com
and Odin flash it. Make 100% sure that the firmware you download is the right one
for your specific phone's model.
Good luck!

Tried everything
Misterjunky said:
Most likely you tried to flash the wrong firmware/rom for your phone and that's why it failed.
Your best bet is to download the official stock firmware from http://SamMobile.com
and Odin flash it. Make 100% sure that the firmware you download is the right one
for your specific phone's model.
Good luck!
Click to expand...
Click to collapse
I already tried to install sock rom (tar.md5) from SamMobile, but Odin starts and fail.

chemarko said:
I already tried to install sock rom (tar.md5) from SamMobile, but Odin starts and fail.
Click to expand...
Click to collapse
C`mon guys HELP PLEASE

[HELP] Please
chemarko said:
C`mon guys HELP PLEASE
Click to expand...
Click to collapse
Me again.
When I start ODIN with stock rom with PDA, this is message
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505TMTEMJ4_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When add re-partition
> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1992)
<OSM> All threads completed. (succeed 0 / failed 1)

chemarko said:
Me again.
When I start ODIN with stock rom with PDA, this is message
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505TMTEMJ4_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When add re-partition
> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1992)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What version of Android u had before flash and what are u trying to flash??
Maybe u can't flash because u had 4.3(KNOX) and u are trying to flash a 4.2 that is possible?
Ops sorry, Its older or newest this version of Android 4.3 that u had?

DefyUser89 said:
What version of Android u had before flash and what are u trying to flash??
Maybe u can't flash because u had 4.3(KNOX) and u are trying to flash a 4.2 that is possible?
Ops sorry, Its older or newest this version of Android 4.3 that u had?
Click to expand...
Click to collapse
I installed few days ago 4.4.2, and CP_I9505XXUFNA5 and BL_I9505XXUFNA5. It has to much bugs so I decided to go back.
I tried to install stock rom from SamMobile with PDA in Odin and got this error.
I flashed just now TWR and GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK and some custom rom 4.3 (google edition).
It installed but system keep crashing. I tried couple of roms and same situation. It is crushing all the time.
Could it be problem with bootloader

chemarko said:
I installed few days ago 4.4.2, and CP_I9505XXUFNA5 and BL_I9505XXUFNA5. It has to much bugs so I decided to go back.
I tried to install stock rom from SamMobile with PDA in Odin and got this error.
I flashed just now TWR and GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK and some custom rom 4.3 (google edition).
It installed but system keep crashing. I tried couple of roms and same situation. It is crushing all the time.
Could it be problem with bootloader
Click to expand...
Click to collapse
You can no longer downgrade to stock 4.3 mate,thats why your getting this error.. flash the 4.4.2 leak and that should fix your problem.
Sent from Hell ?

chemarko said:
I installed few days ago 4.4.2, and CP_I9505XXUFNA5 and BL_I9505XXUFNA5. It has to much bugs so I decided to go back.
I tried to install stock rom from SamMobile with PDA in Odin and got this error.
I flashed just now TWR and GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK and some custom rom 4.3 (google edition).
It installed but system keep crashing. I tried couple of roms and same situation. It is crushing all the time.
Could it be problem with bootloader
Click to expand...
Click to collapse
Repulsa said:
You can no longer downgrade to stock 4.3 mate,thats why your getting this error.. flash the 4.4.2 leak and that should fix your problem.
Sent from Hell ?
Click to expand...
Click to collapse
Oh yes! I forget, I installed FNA1 not FNA5 and i could come back to 4.3 because FNA1 dont have new bootloader... I rode that FNA5 have new bootloader and u can go back to 4.3.
The best choice is how said @Repulsa , U must install FNA5 and after install Philz-touch, CWM or TWR and install any 4.4.2
I hope that we helped to you! :good:
Regards,

Have I bricked it?

Hello from the UK!
I saw on SamMobiles website that they had 4.4.2 for my Note 3 (SM-N9005) with Vodafone... My phone is a Vodafone so I downloaded it used Odin 3.09 to flash it onto the phone... That didnt work it failed on system.img.ext4 with this
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1
This was the file
N9005XXUENB4_N9005VFGENA4_N9005XXUENB1_HOME.tar.md5
I can post a link but im not sure if thats allowed here!
I then tried again with Odin 3.07 after reading the Note 3 doesnt like 3.09... Again it failed, below is what it had on there.... 3.07 actually got futher than 3.09...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005VFGENA4_N9005XXUENB1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried downloading Jelly Bean 4.3 again and using odin to re install it but as soon as I click start it fails...
Kies will not recognise the phone either...
Ive attached the screens I am able to get on my phone... This is it, it will not boot and I get no other things on screen but these...
Does anyone have any advice? How can I fix it? Im expecting calls over the weekend that are really imporant so desperately need this working.
Thanks Jono

JonoWilliams said:
Hello from the UK!
I saw on SamMobiles website that they had 4.4.2 for my Note 3 (SM-N9005) with Vodafone... My phone is a Vodafone so I downloaded it used Odin 3.09 to flash it onto the phone... That didnt work it failed on system.img.ext4 with this
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1
This was the file
N9005XXUENB4_N9005VFGENA4_N9005XXUENB1_HOME.tar.md5
I can post a link but im not sure if thats allowed here!
I then tried again with Odin 3.07 after reading the Note 3 doesnt like 3.09... Again it failed, below is what it had on there.... 3.07 actually got futher than 3.09...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005VFGENA4_N9005XXUENB1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried downloading Jelly Bean 4.3 again and using odin to re install it but as soon as I click start it fails...
Kies will not recognise the phone either...
Ive attached the screens I am able to get on my phone... This is it, it will not boot and I get no other things on screen but these...
Does anyone have any advice? How can I fix it? Im expecting calls over the weekend that are really imporant so desperately need this working.
Thanks Jono
Click to expand...
Click to collapse
Well, first of all, your bootloader has been upgraded to Kitkat's.
So you can't flash a JB ROM.
Keep trying different Kitkat ROMs.
Try the leaked one.
And if you are willing to trip knox, you can use a custom ROM.

Got it working! What I did was
Download the Firmware you require, in my case for the UK Vodafone Version for the SM-N9005 4.4.2 I used this
http://www.sammobile.com/firmwares/3/?download=25990
I then downloaded Odin 3.07 as 3.09 wouldnt work for me!
http://www.android.gs/download-odin-3-07/
Now this alone wouldnt work for me then I found a similar thread that provided some info.
http://forum.xda-developers.com/showthread.php?t=2662373
On this thread they link to a .pit file to flash with the stock ROM, I used this along with the Firmware I downloaded earlier.
http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
So now it would work and I am succesfully on 4.4.2, now once its all running and I got the the Samsung Logo I took the battery out, booted in recovery mode, cleared the cache and the performed a factory reset... Once the phone resarted I went through the normal process of setting it up and viola...
Ill add that although it says it was UK Vodafone mine was spanish? I dont know wether that was because of the .pit file? Ill let the experts decide on that one..
Simple thing though, change the language and remove the vodafone app that came with it in spanish...
Hope its of some help to people.

JonoWilliams said:
Got it working! What I did was
Download the Firmware you require, in my case for the UK Vodafone Version for the SM-N9005 4.4.2 I used this
http://www.sammobile.com/firmwares/3/?download=25990
I then downloaded Odin 3.07 as 3.09 wouldnt work for me!
http://www.android.gs/download-odin-3-07/
Now this alone wouldnt work for me then I found a similar thread that provided some info.
http://forum.xda-developers.com/showthread.php?t=2662373
On this thread they link to a .pit file to flash with the stock ROM, I used this along with the Firmware I downloaded earlier.
http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
So now it would work and I am succesfully on 4.4.2, now once its all running and I got the the Samsung Logo I took the battery out, booted in recovery mode, cleared the cache and the performed a factory reset... Once the phone resarted I went through the normal process of setting it up and viola...
Ill add that although it says it was UK Vodafone mine was spanish? I dont know wether that was because of the .pit file? Ill let the experts decide on that one..
Simple thing though, change the language and remove the vodafone app that came with it in spanish...
Hope its of some help to people.
Click to expand...
Click to collapse
Exactly the same thing happened to me tonight.
What can I say - Thank you SO much for bothering to take to the time to write how you fixed it. It fixed it for me as well - I'm so relieved now!

JonoWilliams said:
Got it working! What I did was
Download the Firmware you require, in my case for the UK Vodafone Version for the SM-N9005 4.4.2 I used this
http://www.sammobile.com/firmwares/3/?download=25990
I then downloaded Odin 3.07 as 3.09 wouldnt work for me!
http://www.android.gs/download-odin-3-07/
Now this alone wouldnt work for me then I found a similar thread that provided some info.
http://forum.xda-developers.com/showthread.php?t=2662373
On this thread they link to a .pit file to flash with the stock ROM, I used this along with the Firmware I downloaded earlier.
http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
So now it would work and I am succesfully on 4.4.2, now once its all running and I got the the Samsung Logo I took the battery out, booted in recovery mode, cleared the cache and the performed a factory reset... Once the phone resarted I went through the normal process of setting it up and viola...
Ill add that although it says it was UK Vodafone mine was spanish? I dont know wether that was because of the .pit file? Ill let the experts decide on that one..
Simple thing though, change the language and remove the vodafone app that came with it in spanish...
Hope its of some help to people.
Click to expand...
Click to collapse
I have spent 24 hours trying to sort this out. Thanks so much

thx ! I'll try it now

Can't factory reset Note 3 - hangs on "recovery booting"

Hi guys,
I'm having a serious problem here.
I searched for the solution on the internet, but I didn't find anything useful...
I need to factory reset my Samsung Galaxy Note 3 (SM-N9005) because of some issues (all of a sudden phone just switch to "kernel panic" mode, and then I have to reboot it by removing battery).
I cannot factory reset it !!!
I tried this:
- Settings -> General -> Backup and Reset -> Factory data reset
* after this the phone restarts and says "Recovery Booting..." and hangs on this
- Then I removed the battery and tried rebooting the phone, but it stil hung on "Recovery booting..." (I didn't hold Home + Vol. Up + Power; just Power)
- Then I removed the battery, pressed Vol. Down + Home + Power, and after the warning showed up I clicked Vol down (for cancel the custum OS installation) and then the phone reboots normally and I still have all my files
- Same thing happens if I turn off the phone and hold Vol. Up + Home + Power
- Same thing happens if I enter "su + Enter" and then "reboot recovery" into Android terminal emulator
- I even tried factory reset via dial codes, but this doesn't seem to work out (nothing happens)... Codes: *#7780#, *2767*3855#, #*#7780#*#, *2767*2878#
I have Jelly Bean 4.3
The phone was rooted via KingoApp
Kies says this: "Current firmware version: PDA:MHL / PHONE:MHK / CSC:MHL (BTU)"
I cannot go to "Firmware upgrade and initialization" on Kies, because it throws an error "'SM-N9005' does not support initializing."
I'm using stock ROM.
Phone is rooted.
I don't have CWM recovery (just a stock recovery that came with phone).
I even followed steps explained here: http://www.youtube.com/watch?v=Uud0UK4thAI
This is how the thing looks on my phone (hangs on "Recovery Booting..." for 10 minutes): http://i.imgur.com/KzE3cST.jpg
Can anybody help me? How can I factory reset my note 3?
Odin? Or some other PC software...?
Tell me if you need more info...
Thanks in advance!
--
thetox2

thetox2 said:
...
I'm using stock ROM.
Phone is rooted.
I don't have CWM recovery (just a stock recovery that came with phone).
I even followed steps explained here: http://www.youtube.com/watch?v=Uud0UK4thAI
This is how the thing looks on my phone (hangs on "Recovery Booting..." for 10 minutes): http://i.imgur.com/KzE3cST.jpg
...
Click to expand...
Click to collapse
You were probably left with an invalid recovery from the kingo root - you probably need to write again in Odin the same stock full firmware that you currently have.

Stock rom
Hey!
Thank you for your reply!
Hmmmm... probably... I don't remember, but I think my rooting process didn't go smoothly, so I'll definetely flash it.
Just few more questions...
- Where can I obtain official stock rom (Jelly bean not KitKat)?
- Will my KNOX get triggered (i didn't trigger it by rooting)?
- Can you recommend me a good tutorial on how to flash Note 3? I don't want to mess it up, and there are a lots of tutorials ond XDA...
Thanks in advance?

thetox2 said:
Hey!
Thank you for your reply!
Hmmmm... probably... I don't remember, but I think my rooting process didn't go smoothly, so I'll definetely flash it.
Just few more questions...
- Where can I obtain official stock rom (Jelly bean not KitKat)?
- Will my KNOX get triggered (i didn't trigger it by rooting)?
- Can you recommend me a good tutorial on how to flash Note 3? I don't want to mess it up, and there are a lots of tutorials ond XDA...
Thanks in advance?
Click to expand...
Click to collapse
Stock rom for n9005 for jb is hard to find. U can google. There's always a site for wad u r looking for.
Knox won't be triggered if u flash ori firmware by odin, if ur knox still 0x0.
U can use odin pc to flash. Just put the tar on the ap/pda. And don't click repartition if u never flash with pit file.
Connect ur phone in download mode, make sure reactivation lock is off (I m not sure abt this, coz mine I always off it), wait till ur odin recognize the com port. Click start.
Quite a lot tutor in here and on google, all are the same. Nothing different.
Sent from N9005 Assassins v2

thetox2 said:
Hey!
Thank you for your reply!
Hmmmm... probably... I don't remember, but I think my rooting process didn't go smoothly, so I'll definetely flash it.
Just few more questions...
- Where can I obtain official stock rom (Jelly bean not KitKat)?
- Will my KNOX get triggered (i didn't trigger it by rooting)?
- Can you recommend me a good tutorial on how to flash Note 3? I don't want to mess it up, and there are a lots of tutorials ond XDA...
Thanks in advance?
Click to expand...
Click to collapse
If you quote the message to which you are replying that user will get notified and will be able to answer you back, if not it will only be a matter of luck.
To get YOUR official stock rom you need to search a site like
http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=NEE#firmware
(replace in the last drop-down NEE with the country from where YOUR N9005 comes, eventually with the correct provider if it is coming from a specific carrier).
If you will use the exact same version of firmware that you currently had it should not trigger knox, however knox can be triggered when you try to downgrade or for certain phones when you write a firmware from the wrong country.
If you are not familiar with Odin search around for a tutorial on it, there are even video tutorials. Also if you are on a firmware BEFORE 4.3 MJ3 you should look into the threads on Universal Root De La Vega - IMHO a huge lot better than kingo for rooting.

xclub_101 said:
If you quote the message to which you are replying that user will get notified and will be able to answer you back, if not it will only be a matter of luck.
To get YOUR official stock rom you need to search a site like
http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=NEE#firmware
(replace in the last drop-down NEE with the country from where YOUR N9005 comes, eventually with the correct provider if it is coming from a specific carrier).
If you will use the exact same version of firmware that you currently had it should not trigger knox, however knox can be triggered when you try to downgrade or for certain phones when you write a firmware from the wrong country.
If you are not familiar with Odin search around for a tutorial on it, there are even video tutorials. Also if you are on a firmware BEFORE 4.3 MJ3 you should look into the threads on Universal Root De La Vega - IMHO a huge lot better than kingo for rooting.
Click to expand...
Click to collapse
Thank you very much for the tip, for links and for your help!
I actually don't know where my phone came from xD It was a gift. Since I'm from Croatia and the phone was unlocked by default I assume the firmware N9005XXUBMJ1 will do the job. In my settings it says that Baseband version is N9005XXBUMHK but I can't find from wthich country is this (on the link you gave me is an option tu search for ROMs by PDA and other criteria, not just by model/country).
Anyways... Thank you so much!
antique_sonic said:
Stock rom for n9005 for jb is hard to find.
Knox won't be triggered if u flash ori firmware by odin, if ur knox still 0x0.
Sent from N9005 Assassins v2
Click to expand...
Click to collapse
Well... xclub_101 found the ROM and I found a bunch of stock ROMs here: http://samsung-updates.com/device/?id=SM-N9005
KNOX is still 0x0.
P.s. I just noticed that you're using Asassins ROM... It is based on KitKat. Do you have any issues with it regarding third party accessories (SPen, SCover, and all that Note3-ish stuff)?
And since I'm flashing... Can you recommend me a good custom ROM?
I found those, but I don't know which one to pick (I don't like bugs and the stock ROM was OK for me):
http://forum.xda-developers.com/showthread.php?t=2701444
http://www.droidviews.com/best-custom-roms-for-galaxy-note-3-sm-n9005/
http://forum.xda-developers.com/showthread.php?t=2470441
Thanks in advance

thetox2 said:
Well... xclub_101 found the ROM and I found a bunch of stock ROMs here: http://samsung-updates.com/device/?id=SM-N9005
KNOX is still 0x0.
P.s. I just noticed that you're using Asassins ROM... It is based on KitKat. Do you have any issues with it regarding third party accessories (SPen, SCover, and all that Note3-ish stuff)?
Click to expand...
Click to collapse
Yes I m using it now. I always change rom base on my mood. Xnote, crash, echoe, assassin, and my own.
Assassin so far I use got no problem for the past few days after installation. Only problem is I cannot remove 1 bloatware, chaton. No matter how I remove it, it still runs as a service.
thetox2 said:
And since I'm flashing... Can you recommend me a good custom ROM?
I found those, but I don't know which one to pick (I don't like bugs and the stock ROM was OK for me):
http://forum.xda-developers.com/showthread.php?t=2701444
http://www.droidviews.com/best-custom-roms-for-galaxy-note-3-sm-n9005/
http://forum.xda-developers.com/showthread.php?t=2470441
Thanks in advance
Click to expand...
Click to collapse
I no idea which one is the best. Just try it. No harm. But just take note, flashing custom rom will trigger ur knox.
And to know good battery based on ur usage, u have to try it for at least 3 full battery cycle, in my opinion.
Sent from N9005 Assassins v2

Stock recovery has also got wipe data/factory reset.Have u tried that?
Sent from my SM-N900 using XDA Premium 4 mobile app

thetox2 said:
Thank you very much for the tip, for links and for your help!
I actually don't know where my phone came from xD It was a gift. Since I'm from Croatia and the phone was unlocked by default I assume the firmware N9005XXUBMJ1 will do the job. In my settings it says that Baseband version is N9005XXBUMHK but I can't find from wthich country is this (on the link you gave me is an option tu search for ROMs by PDA and other criteria, not just by model/country).
Anyways... Thank you so much!
...
Click to expand...
Click to collapse
N9005XXBUMHK is more likely N9005XXUBMHK - see those threads:
http://forum.xda-developers.com/showthread.php?t=2474430
http://forum.xda-developers.com/showthread.php?t=2671149
If the original CSC was BTU and that was the original/test firmware for first generation of Note 3 devices I would rather suggest using BTU again, at a level around MI7 - that one can still be rooted with knox 0 in a very safe way using Universal Root De La Vega (as long as at the first boot you disable both normal updates and security updates).

xclub_101 said:
N9005XXBUMHK is more likely N9005XXUBMHK
Click to expand...
Click to collapse
Well, both BU and UB cannot be found on Firmware check on your link... :S
RISHI RAJ said:
Stock recovery has also got wipe data/factory reset.Have u tried that?
Click to expand...
Click to collapse
The problem is in my recovery. I cannot boot into recovery (probably recovery image is corrupted).
antique_sonic said:
Yes I m using it now. I always change rom base on my mood. Xnote, crash, echoe, assassin, and my own.
Assassin so far I use got no problem for the past few days after installation. Only problem is I cannot remove 1 bloatware, chaton. No matter how I remove it, it still runs as a service.
I no idea which one is the best. Just try it. No harm. But just take note, flashing custom rom will trigger ur knox.
And to know good battery based on ur usage, u have to try it for at least 3 full battery cycle, in my opinion.
Sent from N9005 Assassins v2
Click to expand...
Click to collapse
I'll probably go with the stock ROM for now. But eventually I'll switch to a custom ROM
Thanks guys!

HELP!!!!
HELP!!!
I downloaded a ROM.
I used Odin v3.07 to flash my phone.
I did EVERYTHING according the instrucrtions. Odin and my phone are saying that system.img.ext4 is wrong.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005CROENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I'm searching for the solution on these forums, but NOTHING seems to help. My phone is ruined
http://www.sammobile.com/forum/showthread.php?t=18352
http://forum.xda-developers.com/showthread.php?t=2662373
http://forum.gsmhosting.com/vbb/f777/samsung-note-3-flashing-error-n9005-1769257/
Can ANYBODY help me???

Bad download ? Did you check md5 ?
Sent from my N9005

help
Dejan Sathanas said:
Bad download ? Did you check md5 ?
Sent from my N9005
Click to expand...
Click to collapse
How to check md5?
I downloaded 3 ROMs -> 2 JellyBean ROMs (Same roms from different sources) and one KitKat ROM.
Can you help me?

There should be a md5 number from where you downloaded the rom. If so, check it with a md5 checker.
Are you on JB or KK ?
Sent from my N9005

Dejan Sathanas said:
There should be a md5 number from where you downloaded the rom. If so, check it with a md5 checker.
Are you on JB or KK ?
Sent from my N9005
Click to expand...
Click to collapse
I downloaded from here: http://www.sammobile.com/firmwares/3/?download=20392
I don't see MD5 hash anywhere.
I wanted to check it using this tuorial: http://forum.xda-developers.com/showthread.php?t=1135620, but no luck...
I was on JB, but currently I'm on nothing...

It says you should dl Odin 3.09, but you flashed with .07. It shouldn't really matter, but it's worth a try.
Did none of the 3 roms work ?
Sent from my N9005
---------- Post added at 09:47 PM ---------- Previous post was at 09:44 PM ----------
And if you tried to flash the KK rom, your bootloader might have been updated, so there's no going back to JB.
Sent from my N9005

No luck
Dejan Sathanas said:
It says you should dl Odin 3.09, but you flashed with .07. It shouldn't really matter, but it's worth a try.
Did none of the 3 roms work ?
Sent from my N9005
Click to expand...
Click to collapse
No. None of them worked!
I tried with Odin 3.09.
I also checked the Re-Partition tick and placed PIT file, like this guy on this post: http://forum.xda-developers.com/showpost.php?p=50642419&postcount=2 and on this post: http://forum.gsmhosting.com/vbb/f777/samsung-note-3-flashing-error-n9005-1769257/
Now it is saying:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

Dejan Sathanas said:
---------- Post added at 09:47 PM ---------- Previous post was at 09:44 PM ----------
And if you tried to flash the KK rom, your bootloader might have been updated, so there's no going back to JB.
Sent from my N9005
Click to expand...
Click to collapse
Yeah... it did update. When I try flashing KK it does the same error as before:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005CROENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also, the phone says: "Invalid ext4 image" or something like that...
I always gets stuck on hidden.img.ext4. What is that anyway?!?!

OK, so I flashed the device with KK FW: http://www.sammobile.com/firmwares/3/?download=27080
And I use .PIT files mentioned in the links above.
I flashed it with Odin v3.09
After flashing it got stuck on Samsung logo. I pulled out the battery and went into Recovery (it works now ) and performed factory reset and cache clear.
After that first boot was a bit slower.
And now the phone is up and running.
And here is the message output from Odin
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Thank all of you VERY much!

Edited

[HOW TO] Fix (system rev. check fail device: 2 binary 1) In 5.1.1 G920F

How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM ​

Thanks
Just fixed my baby s6

I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Reflash with stock 5.1.1 via odin.
ROMs for G920F:
http://www.sammobile.com/firmwares/database/SM-G920F/

Is there a 920T version of this?

Here you go:
http://www.sammobile.com/firmwares/database/SM-G920T/

G920I version?
Is there a 920I version as well?
Found it.
http://www.sammobile.com/firmwares/database/SM-G920I/

Criticalstriker said:
I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:

gamekill said:
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:
Click to expand...
Click to collapse
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade

andifds said:
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade
Click to expand...
Click to collapse
It's not possible to downgrade to 5.0.1 if your bootloader is on 5.1.1.

Downloading now. So like all the other Odin roms it passed but does it pass in download mode on the phone that then blocks the download ?

hello!
This works on any 5.1.1?
i mean can i download any 5.1.1. for 920F and it will be fixed or i have to use exactly the rom that is posted on OP?

Once in download mode flash the latest TWRP 2.8.7.1
[url said:
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570[/url]
After flashed you'll be able to boot into recovery and flash your custom ROM [/COLOR][/SIZE]
[/CENTER]
Click to expand...
Click to collapse
hi! can someone help me to flash this recovery.img ?
thanxx in advance.

Thank you so much for this topic, Rossyyy! :good::good::good::good::good::good::good:!!!!!!!!!
Edit; The only thing is that i still get a message (top left) in really small red letters every time i boot. For a few seconds and than boot proceeds by itself....

Rossyyy said:
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM ​
Click to expand...
Click to collapse
Hey, once I am facing the "system rev. check fail device: 2 binary 1 error", I don't think I can power off the phone completely. I can just reboot the phone into the download mode. If I try to reboot into recovery it will say "recovery is not seandroid enforcing"...
How do I power off the phone completely or how do I reboot into recovery?

aeroxy said:
How do I power off the phone completely or how do I reboot into recovery?
Click to expand...
Click to collapse
Volume up, home and power button.

richajax said:
Volume up, home and power button.
Click to expand...
Click to collapse
Oh yes, I have tried this. It will reboot and says "recovery is not seandroid enforcing"...

I think you will find your answer in one of these topics?
http://forum.xda-developers.com/search.php?searchid=379334690

Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE

brettule said:
Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE
Click to expand...
Click to collapse
Thanks for the link. I panicked when this happened, glad i was able to find this topic through google
---------- Post added at 02:46 PM ---------- Previous post was at 02:39 PM ----------
Okay, so it failed. Now what?
I'm starting to panic lol.
<OSM> Please wait..
<OSM> G920IDVU2COF8_G920IODD2COF8_G920IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
**EDIT**
for anyone else that may ever encounter this.. .make sure your "re-partition" option is unchecked in odin.