Hi guys,
Please help !
I have a I9505. My phone is stuck in boot with message "Firmware upgrade encountered an issue. Please select recovery mode in Kies ".
When I try Kies emergency recovery noting happens.
I tried to boot in custom recovery (I had TWRP) and no luck.
Download mod is working. I tried to install sock rom with odin (PDA - one tar.md5 file), but it fail.
chemarko said:
Hi guys,
Please help !
I have a I9505. My phone is stuck in boot with message "Firmware upgrade encountered an issue. Please select recovery mode in Kies ".
When I try Kies emergency recovery noting happens.
I tried to boot in custom recovery (I had TWRP) and no luck.
Download mod is working. I tried to install sock rom with odin (PDA - one tar.md5 file), but it fail.
Click to expand...
Click to collapse
If u hv nandroid backup. Try restoring it. It will return u to last stable condition of your phone
re: flash stock firmware
chemarko said:
Hi guys,
Please help !
I have a I9505. My phone is stuck in boot with message "Firmware upgrade encountered an issue. Please select recovery mode in Kies ".
When I try Kies emergency recovery noting happens.
I tried to boot in custom recovery (I had TWRP) and no luck.
Download mod is working. I tried to install sock rom with odin (PDA - one tar.md5 file), but it fail.
Click to expand...
Click to collapse
Most likely you tried to flash the wrong firmware/rom for your phone and that's why it failed.
Your best bet is to download the official stock firmware from http://SamMobile.com
and Odin flash it. Make 100% sure that the firmware you download is the right one
for your specific phone's model.
Good luck!
Tried everything
Misterjunky said:
Most likely you tried to flash the wrong firmware/rom for your phone and that's why it failed.
Your best bet is to download the official stock firmware from http://SamMobile.com
and Odin flash it. Make 100% sure that the firmware you download is the right one
for your specific phone's model.
Good luck!
Click to expand...
Click to collapse
I already tried to install sock rom (tar.md5) from SamMobile, but Odin starts and fail.
chemarko said:
I already tried to install sock rom (tar.md5) from SamMobile, but Odin starts and fail.
Click to expand...
Click to collapse
C`mon guys HELP PLEASE
[HELP] Please
chemarko said:
C`mon guys HELP PLEASE
Click to expand...
Click to collapse
Me again.
When I start ODIN with stock rom with PDA, this is message
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505TMTEMJ4_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When add re-partition
> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1992)
<OSM> All threads completed. (succeed 0 / failed 1)
chemarko said:
Me again.
When I start ODIN with stock rom with PDA, this is message
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505TMTEMJ4_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When add re-partition
> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1992)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What version of Android u had before flash and what are u trying to flash??
Maybe u can't flash because u had 4.3(KNOX) and u are trying to flash a 4.2 that is possible?
Ops sorry, Its older or newest this version of Android 4.3 that u had?
DefyUser89 said:
What version of Android u had before flash and what are u trying to flash??
Maybe u can't flash because u had 4.3(KNOX) and u are trying to flash a 4.2 that is possible?
Ops sorry, Its older or newest this version of Android 4.3 that u had?
Click to expand...
Click to collapse
I installed few days ago 4.4.2, and CP_I9505XXUFNA5 and BL_I9505XXUFNA5. It has to much bugs so I decided to go back.
I tried to install stock rom from SamMobile with PDA in Odin and got this error.
I flashed just now TWR and GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK and some custom rom 4.3 (google edition).
It installed but system keep crashing. I tried couple of roms and same situation. It is crushing all the time.
Could it be problem with bootloader
chemarko said:
I installed few days ago 4.4.2, and CP_I9505XXUFNA5 and BL_I9505XXUFNA5. It has to much bugs so I decided to go back.
I tried to install stock rom from SamMobile with PDA in Odin and got this error.
I flashed just now TWR and GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK and some custom rom 4.3 (google edition).
It installed but system keep crashing. I tried couple of roms and same situation. It is crushing all the time.
Could it be problem with bootloader
Click to expand...
Click to collapse
You can no longer downgrade to stock 4.3 mate,thats why your getting this error.. flash the 4.4.2 leak and that should fix your problem.
Sent from Hell ?
chemarko said:
I installed few days ago 4.4.2, and CP_I9505XXUFNA5 and BL_I9505XXUFNA5. It has to much bugs so I decided to go back.
I tried to install stock rom from SamMobile with PDA in Odin and got this error.
I flashed just now TWR and GSM_Modem_XXUEMFK_and_LTE_Modem_XXUMFK and some custom rom 4.3 (google edition).
It installed but system keep crashing. I tried couple of roms and same situation. It is crushing all the time.
Could it be problem with bootloader
Click to expand...
Click to collapse
Repulsa said:
You can no longer downgrade to stock 4.3 mate,thats why your getting this error.. flash the 4.4.2 leak and that should fix your problem.
Sent from Hell ?
Click to expand...
Click to collapse
Oh yes! I forget, I installed FNA1 not FNA5 and i could come back to 4.3 because FNA1 dont have new bootloader... I rode that FNA5 have new bootloader and u can go back to 4.3.
The best choice is how said @Repulsa , U must install FNA5 and after install Philz-touch, CWM or TWR and install any 4.4.2
I hope that we helped to you! :good:
Regards,
Related
So I followed this thread exactly, for my rogers I337M
[SGH-I337M] CF-Auto-Root [CANADIAN MODELS ONLY]
http://forum.xda-developers.com/showthread.php?t=2293800&highlight=cf+auto+root
and after I started ODIN after selecting the .tar.md5
I got this.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
And in it says fail on ODIN. And now when I boot up I can't get to my stock OS
only to a screen where it says, "Firmware upgrade encountered an issue. Please Select recovery mode in Kies & try again."
I Can't use my S4 any more . I was wondering if it was because I had a locked bootloader, but the I337M varient should be unlocked right?
I also had the new MG1 firmware before I tried all this, but I saw alot of other MG1 users used this method.
PLEASE HELP, I would be forever grateful.
Are you sure you used the correct version for your model and are you sure you didn't have "repartition" checked in ODIN?
scott14719 said:
Are you sure you used the correct version for your model and are you sure you didn't have "repartition" checked in ODIN?
Click to expand...
Click to collapse
Completely sure.
Can you boot into download mode? If so I would Odin stock firmware and see if that helps. I have used the auto root on a couple different devices and have had no issues.
Sent from my Nexus 10
mymusicathome said:
Can you boot into download mode? If so I would Odin stock firmware and see if that helps. I have used the auto root on a couple different devices and have had no issues.
Sent from my Nexus 10
Click to expand...
Click to collapse
ok so I got the latest firmware for my device.
Build Date: 01.07.2013 -> Region: RWC (Canada (Rogers)) PDA: I337MVLUAMG1 Changelist: 897376 Android: 4.2.2
I got it from this thread
http://forum.xda-developers.com/showthread.php?t=2269304&highlight=flash+stock+firmware
I got back into the download mode (VOLDOWN/HOME/PWR) with the android icon where it says. "Downloading... Do not turn off target!!" plugged in my device got into odin put the stock firmware in PDA and ran then got this.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMG1_I337MOYAAMG1_I337MVLUAMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
and my device still doesn't work.
Try it a few more times. I've used odin where I got "failed" and then after a few tries got it to work.
jd1639 said:
Try it a few more times. I've used odin where I got "failed" and then after a few tries got it to work.
Click to expand...
Click to collapse
I've tried it 10 times so far with different versions of ODIN just to be sure.. No change. Would me having a USB 1.0 have anything to do with it?
I really have no idea what to do.. I have 1 year warranty left with this phone, and me trying to CF-Auto root was the only thing I've done that could have voided my warranty, but it failed and now that I'm stuck would I still be okay if I took it in for warranty?
PromyD said:
I've tried it 10 times so far with different versions of ODIN just to be sure.. No change. Would me having a USB 1.0 have anything to do with it?
Click to expand...
Click to collapse
Try it on a different computer.
jd1639 said:
Try it on a different computer.
Click to expand...
Click to collapse
agreed. or at least a different usb port. are you using the cable that came with your device? i'm assuming you had usb debugging switched on.
So i've tried it on another computer, but since my device is in download mode it doesn't install any samsung drivers to properly identify and read the S4, so it doesn't work. Can anyone please give me some direct links to download the proper usb drivers on windows for my S4.
http://lmgtfy.com/?q=samsung+galaxy+s4+drivers
Thanks to everyone that helped me troubleshoot and gave me options in figuring out the next step. I used another computer and installed the drivers on to that computer ran odin and cf auto root method and it worked like a charm. :victory:
On the first computer I used, I'm almost completely sure I had the wrong S4 Drivers installed and thats why it didn't work.
Thanks to: scott14719, mymusicathome, jd1639, xBeerdroiDx
Lo
PromyD said:
Thanks to everyone that helped me troubleshoot and gave me options in figuring out the next step. I used another computer and installed the drivers on to that computer ran odin and cf auto root method and it worked like a charm. :victory:
On the first computer I used, I'm almost completely sure I had the wrong S4 Drivers installed and thats why it didn't work.
Thanks to: scott14719, mymusicathome, jd1639, xBeerdroiDx
Click to expand...
Click to collapse
You're welcome. Glad to have helped. It's good you got your phone working again.
Ps, nvm
SGH I337M Bricked as well
I tried to odin to stock firmware after installing wicked rom v7 and KT-SGS4 kernel. the reason I wanted to odin to stock was because wicked rom kept disconnecting my wifi so I gave up. so after flashing it failed (of course) and I couldnt boot into android: "firmware update has encountered an issue..."
here is what odin said after failure:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
This happens all the time for me when reodining to stock, but for some reason, THIS time, it didn't. tried 11 times and got pissed off.
someone PLEASE PLEASE HELP ME!!
Copy a rooted i337M rom to your SD card. Boot into recovery , wipe and flash.
Sent from my SGH-I337M using XDA Premium 4 mobile app
I cannot boot into recovery.
Hey Overclock,
Can you confirm whether your knox flag tripped? and what build are you on? I just want to make sure the knox doesnt trip when rooting
OverclockDaS4 said:
I tried to odin to stock firmware after installing wicked rom v7 and KT-SGS4 kernel. the reason I wanted to odin to stock was because wicked rom kept disconnecting my wifi so I gave up. so after flashing it failed (of course) and I couldnt boot into android: "firmware update has encountered an issue..."
here is what odin said after failure:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
This happens all the time for me when reodining to stock, but for some reason, THIS time, it didn't. tried 11 times and got pissed off.
someone PLEASE PLEASE HELP ME!!
Click to expand...
Click to collapse
Take a deep breath, and try another cable. I find a large portion of flash errors are caused by junky usb cables. If that fails, try another usb port and another pc entirely, if possible. Let us know some more info, someone has already asked, more details the better. Good luck.
Sent from my SGH-I337M
pyrexid said:
Hey Overclock,
Can you confirm whether your knox flag tripped? and what build are you on? I just want to make sure the knox doesnt trip when rooting
Click to expand...
Click to collapse
Knox does trip if you root.... not sure there is any method that doesn't...... guess if its important... do some research.. I couldn't find one when I did mine... used CF-auto..... on i337m
Hello from the UK!
I saw on SamMobiles website that they had 4.4.2 for my Note 3 (SM-N9005) with Vodafone... My phone is a Vodafone so I downloaded it used Odin 3.09 to flash it onto the phone... That didnt work it failed on system.img.ext4 with this
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1
This was the file
N9005XXUENB4_N9005VFGENA4_N9005XXUENB1_HOME.tar.md5
I can post a link but im not sure if thats allowed here!
I then tried again with Odin 3.07 after reading the Note 3 doesnt like 3.09... Again it failed, below is what it had on there.... 3.07 actually got futher than 3.09...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005VFGENA4_N9005XXUENB1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried downloading Jelly Bean 4.3 again and using odin to re install it but as soon as I click start it fails...
Kies will not recognise the phone either...
Ive attached the screens I am able to get on my phone... This is it, it will not boot and I get no other things on screen but these...
Does anyone have any advice? How can I fix it? Im expecting calls over the weekend that are really imporant so desperately need this working.
Thanks Jono
JonoWilliams said:
Hello from the UK!
I saw on SamMobiles website that they had 4.4.2 for my Note 3 (SM-N9005) with Vodafone... My phone is a Vodafone so I downloaded it used Odin 3.09 to flash it onto the phone... That didnt work it failed on system.img.ext4 with this
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1
This was the file
N9005XXUENB4_N9005VFGENA4_N9005XXUENB1_HOME.tar.md5
I can post a link but im not sure if thats allowed here!
I then tried again with Odin 3.07 after reading the Note 3 doesnt like 3.09... Again it failed, below is what it had on there.... 3.07 actually got futher than 3.09...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005VFGENA4_N9005XXUENB1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried downloading Jelly Bean 4.3 again and using odin to re install it but as soon as I click start it fails...
Kies will not recognise the phone either...
Ive attached the screens I am able to get on my phone... This is it, it will not boot and I get no other things on screen but these...
Does anyone have any advice? How can I fix it? Im expecting calls over the weekend that are really imporant so desperately need this working.
Thanks Jono
Click to expand...
Click to collapse
Well, first of all, your bootloader has been upgraded to Kitkat's.
So you can't flash a JB ROM.
Keep trying different Kitkat ROMs.
Try the leaked one.
And if you are willing to trip knox, you can use a custom ROM.
Got it working! What I did was
Download the Firmware you require, in my case for the UK Vodafone Version for the SM-N9005 4.4.2 I used this
http://www.sammobile.com/firmwares/3/?download=25990
I then downloaded Odin 3.07 as 3.09 wouldnt work for me!
http://www.android.gs/download-odin-3-07/
Now this alone wouldnt work for me then I found a similar thread that provided some info.
http://forum.xda-developers.com/showthread.php?t=2662373
On this thread they link to a .pit file to flash with the stock ROM, I used this along with the Firmware I downloaded earlier.
http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
So now it would work and I am succesfully on 4.4.2, now once its all running and I got the the Samsung Logo I took the battery out, booted in recovery mode, cleared the cache and the performed a factory reset... Once the phone resarted I went through the normal process of setting it up and viola...
Ill add that although it says it was UK Vodafone mine was spanish? I dont know wether that was because of the .pit file? Ill let the experts decide on that one..
Simple thing though, change the language and remove the vodafone app that came with it in spanish...
Hope its of some help to people.
JonoWilliams said:
Got it working! What I did was
Download the Firmware you require, in my case for the UK Vodafone Version for the SM-N9005 4.4.2 I used this
http://www.sammobile.com/firmwares/3/?download=25990
I then downloaded Odin 3.07 as 3.09 wouldnt work for me!
http://www.android.gs/download-odin-3-07/
Now this alone wouldnt work for me then I found a similar thread that provided some info.
http://forum.xda-developers.com/showthread.php?t=2662373
On this thread they link to a .pit file to flash with the stock ROM, I used this along with the Firmware I downloaded earlier.
http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
So now it would work and I am succesfully on 4.4.2, now once its all running and I got the the Samsung Logo I took the battery out, booted in recovery mode, cleared the cache and the performed a factory reset... Once the phone resarted I went through the normal process of setting it up and viola...
Ill add that although it says it was UK Vodafone mine was spanish? I dont know wether that was because of the .pit file? Ill let the experts decide on that one..
Simple thing though, change the language and remove the vodafone app that came with it in spanish...
Hope its of some help to people.
Click to expand...
Click to collapse
Exactly the same thing happened to me tonight.
What can I say - Thank you SO much for bothering to take to the time to write how you fixed it. It fixed it for me as well - I'm so relieved now!
JonoWilliams said:
Got it working! What I did was
Download the Firmware you require, in my case for the UK Vodafone Version for the SM-N9005 4.4.2 I used this
http://www.sammobile.com/firmwares/3/?download=25990
I then downloaded Odin 3.07 as 3.09 wouldnt work for me!
http://www.android.gs/download-odin-3-07/
Now this alone wouldnt work for me then I found a similar thread that provided some info.
http://forum.xda-developers.com/showthread.php?t=2662373
On this thread they link to a .pit file to flash with the stock ROM, I used this along with the Firmware I downloaded earlier.
http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
So now it would work and I am succesfully on 4.4.2, now once its all running and I got the the Samsung Logo I took the battery out, booted in recovery mode, cleared the cache and the performed a factory reset... Once the phone resarted I went through the normal process of setting it up and viola...
Ill add that although it says it was UK Vodafone mine was spanish? I dont know wether that was because of the .pit file? Ill let the experts decide on that one..
Simple thing though, change the language and remove the vodafone app that came with it in spanish...
Hope its of some help to people.
Click to expand...
Click to collapse
I have spent 24 hours trying to sort this out. Thanks so much
thx ! I'll try it now
hello everyone
i rooted my s4 a while back, then unrooted by flashing XSA-I9505XXUEMK9-20131212101727 through odin
then i decided to root it again, it worked but this time the wifi stopped working so i flashed XSA-I9505XXUEMK9-20131212101727 (same firmware) again, except everytime i do it, odin gives me a fail
i used a pit file to flash with XSA-I9505XXUEMK9-20131212101727 (same firmware again), except during the middle of this process, the connection between my cable and phone broke
tried pit + XSA-I9505XXUEMK9-20131212101727 (same thing) on odin 3.09 after the first attempt, it gives me a fail and this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> NON-HLOS.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
right now, when i try to boot my phone, it gives me "firmware upgrade encountered an issue. please select recovery mode in kies and try again", though i can't do anything in kies
all i can access is download mode, recovery mode doesn't work either (it never did, even when my phone was fine)
please help
chilifourloko said:
hello everyone
i rooted my s4 a while back, then unrooted by flashing XSA-I9505XXUEMK9-20131212101727 through odin
then i decided to root it again, it worked but this time the wifi stopped working so i flashed XSA-I9505XXUEMK9-20131212101727 (same firmware) again, except everytime i do it, odin gives me a fail
i used a pit file to flash with XSA-I9505XXUEMK9-20131212101727 (same firmware again), except during the middle of this process, the connection between my cable and phone broke
tried pit + XSA-I9505XXUEMK9-20131212101727 (same thing) on odin 3.09 after the first attempt, it gives me a fail and this
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> NON-HLOS.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
right now, when i try to boot my phone, it gives me "firmware upgrade encountered an issue. please select recovery mode in kies and try again", though i can't do anything in kies
all i can access is download mode, recovery mode doesn't work either (it never did, even when my phone was fine)
please help
Click to expand...
Click to collapse
Although this message your phone is in download mode
change usb port and try again
try different port
Fixed it somehow........
actually disregard all that, i flashed the pit file by itself in odin 3.09 and everything works again O_O
i'm missing an app which is weird...
i still can't reflash XSA-I9505XXUEMK9-20131212101727 through odin though, it still gives me a fail, which ends up ruining everything again, so i reflash the pit and now this happens
i did a factory reset, now samsung keyboard keeps crashing and the menu and back button do nothing
wth is happening ._.
chilifourloko said:
i still can't reflash XSA-I9505XXUEMK9-20131212101727 through odin though, it still gives me a fail, which ends up ruining everything again, so i reflash the pit and now this happens
i did a factory reset, now samsung keyboard keeps crashing and the menu and back button do nothing
wth is happening ._.
Click to expand...
Click to collapse
maybe wrong or corrupt firmware file try another
pda4g said:
maybe wrong or corrupt firmware file try another
Click to expand...
Click to collapse
which firmware should i use
does it matter ?
chilifourloko said:
which firmware should i use
does it matter ?
Click to expand...
Click to collapse
download firmware for your country
Your file may be damaged
download new
pda4g said:
download firmware for your country
Your file may be damaged
download new
Click to expand...
Click to collapse
redownloaded firmware, stopped antivirus and all kies processes, changed usb ports to one of the back ones, reflashed firmware from ~80 percent battery aaaaaaaaaaaaand...
IT WORKS !!!!!!!!!!!!!!!!!!!!!!!!!!!!
HALLELUJAH
chilifourloko said:
redownloaded firmware, stopped antivirus and all kies processes, changed usb ports to one of the back ones, reflashed firmware from ~80 percent battery aaaaaaaaaaaaand...
IT WORKS !!!!!!!!!!!!!!!!!!!!!!!!!!!!
HALLELUJAH
Click to expand...
Click to collapse
ok Good luck!
So I've tried to revert back to the stock ROM using ODIN at it always fails right at the very end. Here's what ODIN says in its message box;
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANL1_G900FOJV1AOA1_G900FXXU1ANG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
After rebooting from the fail it gives a screen saying "Firmware upgrade encountered an issue" and I can't open recovery but I can get into download mode again. I'm using an SM-G900F. Please help, I'm not a fan of £350 paperweights.
Flash the correct PIT file with the stock ROM
Easy to find with a quick Google
*Detection* said:
Flash the correct PIT file with the stock ROM
Easy to find with a quick Google
Click to expand...
Click to collapse
I've looked before but I've never managed to find one for my model, maybe I'm just dumb and not looking in the right place. Also I've heard that PIT files can potentially brick your phone so I'm a little hesitant
Well from the looks of the ROM name you're trying to flash, it's a G900F
PIT file is very easy to find for that model
http://bfy.tw/UmS
EDIT -
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
*Detection* said:
Well from the looks of the ROM name you're trying to flash, it's a G900F
PIT file is very easy to find for that model
http://bfy.tw/UmS
EDIT -
http://forum.xda-developers.com/showpost.php?p=52329647&postcount=2
Click to expand...
Click to collapse
You're a saint mate, thank you so much, I used the 16gb 900f pit from the link you gave alongside one of the ROMs in your signature and its back to working order
Nice one
*Detection* said:
Nice one
Click to expand...
Click to collapse
Hello, i recently got a used s5 running 5.0 lollipop Poland latest build. I tried to root it and install customer recovery but was met with that recovery is seandroid enforcing something error. I looked on google found a workout to pull the battery out as soon as Odin finishes flashing Root. The situation is that i have rooted the phone and have also installed TWRP but when i press power +vol up + home to enter recovery it still does display that seandroid error for 3,4 seconds and then boots into recovery.....and i am not able to root my device normally (without pulling battery immediately). My question is that if i download that PIT file from the link you gave and flash it with odin will it delete my EFS or modem folder? ...will all these issues be resolved if i flash S5 16 GB pit file?
I've done everything to restore to stock firmware. I used odin-v3.10.6 and Kies 3. They both stop at 4%. My firmware is T530NUUEU1BOE5_T530NUXAR1BOE5_XAR.zip. But I can flash TWRP-2.8.7 via Odin just fine. But I am running out of ideas.
T530NUUEU1BOE5_T530NUXAR1BOE5_HOME.tar.md5 (2,225,735,835 bytes)
MD5: 5358d7e9247803a164d9a8cbc713bc55
T530NUUEU1BOE5_T530NUXAR1BOE5_XAR.zip (1,351,979,593 bytes)
MD5: 5c910ca3b4599971669cddf445fef8dc
This is why I'm requesting a PIT file or another solution.
Thanks
Sakui
sakui23 said:
I've done everything to restore to stock firmware. I used odin-v3.10.6 and Kies 3. They both stop at 4%. My firmware is T530NUUEU1BOE5_T530NUXAR1BOE5_XAR.zip. But I can flash TWRP-2.8.7 via Odin just fine. But I am running out of ideas.
T530NUUEU1BOE5_T530NUXAR1BOE5_HOME.tar.md5 (2,225,735,835 bytes)
MD5: 5358d7e9247803a164d9a8cbc713bc55
T530NUUEU1BOE5_T530NUXAR1BOE5_XAR.zip (1,351,979,593 bytes)
MD5: 5c910ca3b4599971669cddf445fef8dc
This is why I'm requesting a PIT file or another solution.
Thanks
Sakui
Click to expand...
Click to collapse
Try taking off the .md5 extension, or try the Canadian Firmware file, or try KitKat instead.
Also try doing a factory reset in recovery before flashing the firmware file
thisisapoorusernamechoice said:
Try taking off the .md5 extension, or try the Canadian Firmware file, or try KitKat instead.
Also try doing a factory reset in recovery before flashing the firmware file
Click to expand...
Click to collapse
Some reason TWRP-v2.8.7 can't mount /system when I do a wipe. Is there a way to do it manually and wipe it myself?
Thanks
Sakui
sakui23 said:
Some reason TWRP-v2.8.7 can't mount /system when I do a wipe. Is there a way to do it manually and wipe it myself?
Thanks
Sakui
Click to expand...
Click to collapse
If you want you always can to use service firmware for your device from here http://forum.xda-developers.com/showpost.php?p=61896173&postcount=1 .
This firmware include pit-file .
thisisapoorusernamechoice said:
Try taking off the .md5 extension, or try the Canadian Firmware file, or try KitKat instead.
Also try doing a factory reset in recovery before flashing the firmware file
Click to expand...
Click to collapse
I tried everything you said and I got no where. TWRP complained that the file system was read only.
repey6 said:
If you want you always can to use service firmware for your device from here http://forum.xda-developers.com/showpost.php?p=61896173&postcount=1 .
This firmware include pit-file .
Click to expand...
Click to collapse
I'm trying it right now. I'm just confused why Odin stops at system.img.ext4. Is the partition corrupt because its read only? But I installed a custom ROM (BlissPOP) and it worked fine.
sakui23 said:
I tried everything you said and I got no where. TWRP complained that the file system was read only.
Click to expand...
Click to collapse
In TWRP 2870 you need uncheck checkbox on Mount button
repey6 said:
If you want you always can to use service firmware for your device from here http://forum.xda-developers.com/showpost.php?p=61896173&postcount=1 .
This firmware include pit-file .
Click to expand...
Click to collapse
Service firmware [SM-T530NUUEU1BOE5_XAR_SERVICE_LP.zip] didn't work. It stopped at 4% again. But I have 5.0.1 and not 4.4. TWRP won't let me check "system" under mount.
It stopped at 4% again
Click to expand...
Click to collapse
What is 4% ? Where ? I dont understand this .
repey6 said:
What is 4% ? Where ? I dont understand this .
Click to expand...
Click to collapse
That's where Kies 3 stopped at. It stops in system.img.ext4 [Odin-v3.10.6] at the beginning of it. But it does process it but very little of it.
sakui23 said:
That's where Kies 3 stopped at. It stops in system.img.ext4 [Odin-v3.10.6] at the beginning of it. But it does process it but very little of it.
Click to expand...
Click to collapse
Why Kies . Close it . Use only Odin with him guide . Go to dounload mode . Connect to PC . In Odin download unpack service firmware (BL , AP , CSC ) to their button . And start . Please copy Odin log to me .
Odin v1.85
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_XAR_T530NUXAR1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The newer version don't spit out an error. Just sits there.
Stop Kies and delete from processes . Stop antivirus .
sakui23 said:
Odin v1.85
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_XAR_T530NUXAR1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The newer version don't spit out an error. Just sits there.
Click to expand...
Click to collapse
Correct, kies is awful don't use it. Also use Odin v3.10 or 3.09, not 1.85
Boy, do I feel very stupid...
It was the cords. I had 2 extension USB cords attached to the cord for the Tab 4 and used a different USB port.
Now, the service and the regular firmware works now.
Thanks for everything.
Sakui