I've noticed that when I switchbon my newly bought s4 it shows boot loader info in the top left hand corner for about a second. Is this normal? Because I've never seen it on any other Samsung phone before.
Sent from my GT-I9505 using XDA Free mobile app
mrstabs said:
I've noticed that when I switchbon my newly bought s4 it shows boot loader info in the top left hand corner for about a second. Is this normal? Because I've never seen it on any other Samsung phone before.
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
It's not new if you see the boot loader info. Can u tell me what text exactly appears?
Joku1981 said:
It's not new if you see the boot loader info. Can u tell me what text exactly appears?
Click to expand...
Click to collapse
It's hard to tell as it only stays on for a second. it mentions bootloader version, debug level, msm?? chip, bootloader sv smev??
Anyone?
mrstabs said:
Anyone?
Click to expand...
Click to collapse
Hang on, if I'm right, this Bootloader info is in blue? And yes than it's normal.
Tkkg1994 said:
Hang on, if I'm right, this Bootloader info is in blue? And yes than it's normal.
Click to expand...
Click to collapse
No mate. Its in white. It just worries me because I've never known it before with a Samsung device. My partner had had an s4 since launch but never noticed it on hers. But then she never restarts hers anyway lol.
mrstabs said:
No mate. Its in white. It just worries me because I've never known it before with a Samsung device. My partner had had an s4 since launch but never noticed it on hers. But then she never restarts hers anyway lol.
Click to expand...
Click to collapse
You can check if everything is okay. Power off phone. Press on button and volume down together until a triangle appears. Than click volume up I think and than you can write me what there is written. After you wrote that down somewhere, make a restart
Basically under the usual download mode info it says what flashes up in the top left corner in grey. It says.......
Write protection enabled
Emmc Burt mode enabled
Reboot mode 0x500da4ed
Power on reason
Cable
Debug level mid
Board rev 11
Msm chip rev 2
Msm hw id
Boot loader version
Boot loader rp swrev
Speed bin
Acpu PVS
Serial number
mrstabs said:
Basically under the usual download mode info it says what flashes up in the top left corner in grey. It says.......
Write protection enabled
Emmc Burt mode enabled
Reboot mode 0x500da4ed
Power on reason
Cable
Debug level mid
Board rev 11
Msm chip rev 2
Msm hw id
Boot loader version
Boot loader rp swrev
Speed bin
Acpu PVS
Serial number
Click to expand...
Click to collapse
I meant something like this: http://www.tech-recipes.com/wp-content/uploads/2013/05/download-mode-500x397.jpg
Yes it says the same. But under the usual download mode info that's what it all says in grey.
mrstabs said:
Yes it says the same. But under the usual download mode info that's what it all says in grey.
Click to expand...
Click to collapse
Is your knox 0x0 or 0x1?
Its untouched 0x0 I am just really concerned about why it shows all that extra info. And of course flashed it up in the top left corner when I boot my device.
Does anyone have any ideas?
mrstabs said:
Its untouched 0x0 I am just really concerned about why it shows all that extra info. And of course flashed it up in the top left corner when I boot my device.
Click to expand...
Click to collapse
I saw this in old bootloaders. I think you only need update your device :highfive:
Joku1981 said:
I saw this in old bootloaders. I think you only need update your device :highfive:
Click to expand...
Click to collapse
I did update it and it has the latest bootloader. The info that flashes up tells you which boot loader it is.
Hi, I have the same issue, I've tried updating to the latest stock software using odin but still does it, doesn't seem to affect the unit but I wonder if there is a way to stop it from happening, did you find out how to prevent it? The KNOX is still 0x0 and I haven't rooted it and it shows that it is BTU csc. It flashes up immediately after the vibrate on power on from being switched off and then disappears just before the Samsung logo is displayed, it is only there for about a second, I managed to get a photograph of it below. If you put it into Odin mode it also shows under the normal text but it is in a darker grey colour text. It will still go into recovery boot mode and when you do that the blue coloured text shows underneath that writing just before it enters the recovery screen. I've tried clearing cache and factory reset in recovery mode but it always appears no matter what. There must be something I need to update somewhere to get rid of it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hi,
I bought what was described as a refurbished i9500 off of ebay. The phone itself looks to be genuine when compared to my i337.
In the About Device section, it is listed as a GT-I9500. The sticker on the back says GT- i9500, but according to the IMEI, it is listed as i337 Galaxy S4. Here are some interesting points: it has Snapdragon 600 processor, and it connects to the 4G LTE network on At&t. When I ran a factory reset, everything was in Chinese. After changing the language to English, the calendar still has the lunar calendar locked in and two Chinese calendars that I can't delete. Also, there were two Chinese apps that appear after the reset (that I deleted). The phone seems to work fine- my wife is using it, but I don't like the fact that things don't match up. I tried to update software in Kies, but it says it is updated (has 4.2.2), and it lists the phone as a i9500. I don't know much about phones, but is it possible that someone loaded i9500 firmware on i337 hardware? If so what is the best /easiest way for me to correct this?
Thanks for any help you can give.
Put ur phone in DOWNLOAD MODE:
- Firstly, power off your Samsung Galaxy S4 totally and after that remove its battery and keep it out around of 10 seconds.
- Secondly, Re-insert the device’s battery back in its specific location.
- Thirdly, press and keep holding the following combination of buttons: Volume Down, Home and Power buttons simultaneous.
- Now, when the ‘Warning!!’ message will be displayed release the buttons.
- After you released the buttons, press Volume UP button, for confirming that you want to enter into Download Mode Menu.
Attach here what appears (ur phone is a clone if the letters appears in chinese) :highfive:
Joku1981 said:
Put ur phone in DOWNLOAD MODE:
- Firstly, power off your Samsung Galaxy S4 totally and after that remove its battery and keep it out around of 10 seconds.
- Secondly, Re-insert the device’s battery back in its specific location.
- Thirdly, press and keep holding the following combination of buttons: Volume Down, Home and Power buttons simultaneous.
- Now, when the ‘Warning!!’ message will be displayed release the buttons.
- After you released the buttons, press Volume UP button, for confirming that you want to enter into Download Mode Menu.
Attach here what appears (it will be a clone if the letters are in chinese) :highfive:
Click to expand...
Click to collapse
Here's what I think I can read (it's small) in the top left corner:
ODIN MODE (in red text)
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
CSB-CONFIG-LSB:8x38
Write Protection: Enable (in gray text)
In big letters below the android- "Downloading... Do not turn off target!!"
No Chinese- That's a good sign- What next?
You have an i337 dude.
By the way, it's perfectly fine to hold power button and turn off device.
It just says don't in case you're flashing firmware with Odin or Kies
Sent from my GT-I9505 using XDA Premium HD app
acgtr said:
Here's what I think I can read (it's small) in the top left corner:
ODIN MODE (in red text)
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
CSB-CONFIG-LSB:8x38
Write Protection: Enable (in gray text)
In big letters below the android- "Downloading... Do not turn off target!!"
No Chinese- That's a good sign- What next?
Click to expand...
Click to collapse
Can you attach one screenshot of "About device" pls?
Joku1981 said:
Can you attach one screenshot of "About device" pls?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
acgtr said:
View attachment 2748422
Click to expand...
Click to collapse
One XDA member had same problem: HERE
You have 2 options under my point of view:
1. Let it how its if the phone runs ok.
or
2. Flash the firmware SGH-I337 through ODIN if the phone becomes to do weird things: This ONE (This method may brick ur phone forever, do it by your own responsibility).
Joku1981 said:
One XDA member had same problem: HERE
You have 2 options under my point of view:
1. Let it how its if the phone runs ok.
or
2. Flash the firmware SGH-I337 through ODIN if the phone becomes to do weird things: This ONE (This method may brick ur phone forever, do it by your own responsibility).
Click to expand...
Click to collapse
Thanks for the link to someone else with a similar issue. I tried doing a search but couldn't find anything. Maybe my search terms were wrong. The phone has been running OK. It has a few quirks compared to my I337.
It says the firmware is up to date, although it is 4.2.2. Even with kies, it will not upgrade to the latest firmware. My wife is happy with it as is, but I feel it should have the proper firmware to match the phone. Is it really that risky to flash the firmware through ODIN? Also, if I do that, will I lose all information on the phone- texts, settings, etc.? I would have contacts and images/videos on a separate memory card. Also, do I need any other files- I see some videos on youtube where people are using the firmware plus some tar file. Some of these videos claim that their methods will unbrick or unroot a phone. If I try to flash the firmware and it doesn't work, will I be able to unbrick the phone? I don't want to ruin a quirky, but working phone.
Thanks again for the help.
Can attach one pic of kies?
Joku1981 said:
Can attach one pic of kies?
Click to expand...
Click to collapse
I have kies on my desktop- I connected the phone to try to update to 4.4.2. What screenshot are you looking for with kies?
Joku1981 said:
\
2. Flash the firmware SGH-I337 through ODIN if the phone becomes to do weird things: This ONE (This method may brick ur phone forever, do it by your own responsibility).
Click to expand...
Click to collapse
I see everyone put huge "do this at your own risk, you may brick your phone" warnings when suggesting flashing the firmware. Just how much of a risk is this, if I follow the instructions exactly? Also I see videos talking about "unbricking" your phone. If I do brick it, will I be able to unbrick it? I would like to put the correct firmware on the phone, but I don't want to ruin it either.
Thanks for any help you can give.
In the process of doing a custom restore, i inadvertantly restored ONLY the boot. Now adb nor the PC recognize the phone. I cant seem to e able to flash through ODIN or through a command prompt. Ive re-installed the drivers several times...thanks if anyone can help.
ramjet6973 said:
In the process of doing a custom restore, i inadvertantly restored ONLY the boot. Now adb nor the PC recognize the phone. I cant seem to e able to flash through ODIN or through a command prompt. Ive re-installed the drivers several times...thanks if anyone can help.
Click to expand...
Click to collapse
Can you get back into recovery?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No, Im uable to go into recovery as well. I feel like ive hit the end of the line, here.
ramjet6973 said:
No, Im uable to go into recovery as well. I feel like ive hit the end of the line, here.
Click to expand...
Click to collapse
What does it do when you try to boot into recovery?
The Galaxy screen flashes on then off, then turns off again.
ramjet6973 said:
The Galaxy screen flashes on then off, then turns off again.
Click to expand...
Click to collapse
Does it say "Booting Recovery" in blue? What's the problem you're having with Odin?
No recovery in blue. I mentioned odin because it's not showing that I'm plugged into the PC. When I try to power up or try to put it into recovery, the Galaxy screen just flashes on once and then powers off. I'm able to go into download mode, but it's unreadable by the PC. I've tried two different PCs.
ramjet6973 said:
No recovery in blue. I mentioned odin because it's not showing that I'm plugged into the PC. When I try to power up or try to put it into recovery, the Galaxy screen just flashes on once and then powers off. I'm able to go into download mode, but it's unreadable by the PC. I've tried two different PCs.
Click to expand...
Click to collapse
On the S3 we had "debrick images" you could put on your sdcard and push it through adb, but you said that's not working. I've heard J-Tag can bring phones back too but I don't know anything about it.
When "on", just the Galaxy and In top left in red "kernel is not Se android enforcing" below that in yellow "set warranty bit: kernel.
Download mode is as follows:
ODIN MODE in red
Product name: sph-l720
Current binary: custom
System status: custom
Knox kernel lock: 0x0
Knox warranty void: 0x0
CSB-CONFIG-LSB:0x0
Write protection: enable
eMMC BURST MODE enabled
ramjet6973 said:
When "on", just the Galaxy and In top left in red "kernel is not Se android enforcing" below that in yellow "set warranty bit: kernel.
Download mode is as follows:
ODIN MODE in red
Product name: sph-l720
Current binary: custom
System status: custom
Knox kernel lock: 0x0
Knox warranty void: 0x0
CSB-CONFIG-LSB:0x0
Write protection: enable
eMMC BURST MODE enabled
Click to expand...
Click to collapse
that's nothing out of the ordinary... I'm surprised your Knox counter isn't 0x1 with a custom binary, everything else is normal.
Must have been a typo..yes it was 0x1. Well, I want to thank you for your time. I downloaded and installed the full sdk and so it now recognizes and I've got my baby rolling again. Thanks again, good chance we'll meet again if I keep dabbling in these affairs...have a good weekend.
If Odin is not recognizing your device in download mode, you might have luck using heimdall to flash a custom recovery, and restore a backup or flash a rom from there.
But yeah you should've tripped Knox if you've used Odin to flash anything besides a stock tar.
Edit: didn't see your post above. Glad you got it working. Those pesky drivers
Sent from my SPH-L720 using XDA Free mobile app
I created an account here because I need all your help and I've been crawling all over the internet, but I cannot find anything for my problem.
Whenever I charge my phone, I turn it off, shut it off to be exact so that it charges faster. One morning, I woke up and I booted it up, but it won't get past the Samsung logo. It will stay like that for a while, then it will vibrate and will appear at the same screen again. Also, whenever I put the battery on, a green LED will stay on even though the phone is still not on. I cannot access recovery mode, only download mode. My phone is rooted. It has been once submerged in water but no problems. No custom ROMS, but there is a custom recovery that is INACCESSIBLE. I badly need all your help since it makes me feel bad having a $600 paperweight. I have tried leaving the battery out for weeks and almost a month now. Ask me anything and I will try to answer with what I know.
Thank you and I hope for the best. (Cause it made me really sad. :crying,
Robert
Download a stock ROM from sammobile .com
Download ODIN (download and instructions under the download)
Flash stock ROM with the phone in download mode using ODIN
See if it boots, if not, factory reset from recovery
*Detection* said:
Download a stock ROM from sammobile .com
Download ODIN (download and instructions under the download)
Flash stock ROM with the phone in download mode using ODIN
See if it boots, if not, factory reset from recovery
Click to expand...
Click to collapse
I cannot access recovery mode. It says "recovery mode is not seandroid enforced" or something similar, then the screen freezes and returns to its original Samsung logo. The process goes on forever.
Yea, so flash a stock ROM first...
*Detection* said:
Yea, so flash a stock ROM first...
Click to expand...
Click to collapse
Hi *Detection*
Sorry disturbing your wonderful support effort but I would like to provide @hyperfused07 with some links that I consider useful:
To speed up your SamMobile experience, before finding your devices section (that you didn't provide) I suggest using the below tool to perform the download:
[TOOL] SamFirm - Samsung firmware downloader & checker
Just provide Model+Region and it will find you the newer available. Please, before download, check the boxes: CRC32 & Decrypt
Lastest Odin v3.11.1
To use Odin you will have to enter "Download Mode" by pressing: Home + Volume Down + Power buttons
Nice regards.
hyperfused07 said:
I cannot access recovery mode. It says "recovery mode is not seandroid enforced" or something similar, then the screen freezes and returns to its original Samsung logo. The process goes on forever.
Click to expand...
Click to collapse
Kdio said:
Hi *Detection*
Sorry disturbing your wonderful support effort
Click to expand...
Click to collapse
Actually my support effort was perfectly adequate, if OP had read and followed the instructions I provided in my first post
I don't enjoy having to post the same thing twice, especially if OP won't even read it once, hence my shortened 2nd post
Kdio said:
Hi *Detection*
Sorry disturbing your wonderful support effort but I would like to provide @hyperfused07 with some links that I consider useful:
To speed up your SamMobile experience, before finding your devices section (that you didn't provide) I suggest using the below tool to perform the download:
[TOOL] SamFirm - Samsung firmware downloader & checker
Just provide Model+Region and it will find you the newer available. Please, before download, check the boxes: CRC32 & Decrypt
Lastest Odin v3.11.1
To use Odin you will have to enter "Download Mode" by pressing: Home + Volume Down + Power buttons
Nice regards.
Click to expand...
Click to collapse
I don't understand how to use this software.
I put in the Model Number "SM-G9008W"
and region "CHN" (tried CN and CH)
Its says "Could not fetch info for SM-G9008W/CHN. Please verify the input or use manual info"
hyperfused07 said:
I don't understand how to use this software.
I put in the Model Number "SM-G9008W"
and region "CHN" (tried CN and CH)
Its says "Could not fetch info for SM-G9008W/CHN. Please verify the input or use manual info"
Click to expand...
Click to collapse
CHM (China Mobile)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Detection* said:
CHM (China Mobile)
Click to expand...
Click to collapse
Hey, I just finished reflashing my phone, its just stuck at Samsung Logo still with 'Recovery booting' at the top, it loops on forever.
*Detection* said:
CHM (China Mobile)
Click to expand...
Click to collapse
UPDATE: I tried to flash a PIT file, the "Recovery booting" is gone but, my S5 still loops and it's green LED is staying strong.
...................Odin flash fails fixed 100% solutions..................
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Explanation to why odin fails
When your s8/ s8+ is forced rebooted by holding the power and volume down buttons or crash reboots. And when booting into download mode for some reason download mode is locked or corrupted and Odin will fail even if you use official device specific firmware. So follow the steps below to fix
How to fix!
1. Boot into download mode by pressing ( power + volume down + Bixby button) and stop at the screen of continue and reboot.
2. Press volume down to restart phone
3. Quickly boot back into download mode by pressing (power + volume down + Bixby button)
4. Press continue
5. Congratulations fully working now
Awesome thank you great work
What if by rooting you blew the efuse like I did?
Cost me £290 at samsung to repair.
matthew33 said:
What if by rooting you blew the efuse like I did?
Cost me £290 at samsung to repair.
Click to expand...
Click to collapse
Well in that case . Its not a brick or odin fail. Its parts replacements . So sorry to hear that :crying:
This method is works only if the device hardware works
Sent from my Samsung SM-G955F using XDA Labs
Holy Thanks man, I really thought my G955F was dead.
Thanks mate.......
holy **** dude ****ing lifesaver thank you so much
thought my s8+ (g955f) was dead but you saved it
rady96 said:
Well in that case . Its not a brick or odin fail. Its parts replacements . So sorry to hear that :crying:
This method is works only if the device hardware works
Sent from my Samsung SM-G955F using XDA Labs
Click to expand...
Click to collapse
so i noticed that mine also says "blown fuse," but i read somewhere that its normal??? my problem is, i have a G955U AT&T, and every time my phone powers down and i reboot it i always goes into a black screen and says SYSTEN UI CRASH. Does anyone know what is causing that and if so, is it the blown fuse? im honestly ready to go back to a flip phone haha because these damn nice phones have more problems then my marriage,:laugh::laugh: Just kidding. help would be appreciated.
this method is not working for me ive been trying it for hours and nothing. im in a bootloop no matter what i flash in Odin. i have no recovery, no system,no boot. im getting over it. and im flashing the c9 firmware
many thanks bro
podagee said:
so i noticed that mine also says "blown fuse," but i read somewhere that its normal??? my problem is, i have a G955U AT&T, and every time my phone powers down and i reboot it i always goes into a black screen and says SYSTEN UI CRASH. Does anyone know what is causing that and if so, is it the blown fuse? im honestly ready to go back to a flip phone haha because these damn nice phones have more problems then my marriage,:laugh::laugh: Just kidding. help would be appreciated.
Click to expand...
Click to collapse
Rpmb fuse?
That's the bootloader rev efuse. Flashing the first ever on the phone by the factory does that. Every single s8/s8+ phone ever has that
DELETED
Holy crap, I can't believe this worked.... (s7 edge exynos)
Yo dude this worked like a charm , thanks for the help (S8+ G955FD)
Thanks you very much
Worth !!
100% Works
Your a legend! Thank you so much
matthew33 said:
What if by rooting you blew the efuse like I did?
Cost me £290 at samsung to repair.
Click to expand...
Click to collapse
where did it show you blew efuse??
Gone fishin
Really thanks for your valuable help, I had been looking for a solution to the problem for more than two hours and this was so simple. I even tried to load the .pit file using the ODIN
pls i have a big problem someone help me!!!! I install twrp through odin n and booted n had verified faild option then i press the reset button now the phone can not flash it restart when i press start on odin. and phone is stuck on logo model is SM-G955f. pls help
My samsung phone stuck at this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Photo not really good Quality to see details with my old blind eyes...
Could be Odin aka Download Mode...
So if my Crystal Ball on...
Something goes wrong with Firmware or something else happend...
So maybe more details and better Photo could help.
Best Regards
adfree said:
Photo not really good Quality to see details with my old blind eyes...
Could be Odin aka Download Mode...
So if my Crystal Ball on...
Something goes wrong with Firmware or something else happend...
So maybe more details and better Photo could help.
Best Regards
Click to expand...
Click to collapse
Its shows the text like in download mode but in boot screen, and stuck from there
Can you maybe make new Photo with better Quality?
Because it contain usefull infos... on your screen.
So without chance to read...
We need Crystal Ball...
Best Regards
Oh... Alternate solution...
Simple write text from screen... and type here...
Oh. Only if you still expect any kind of help.
adfree said:
Can you maybe make new Photo with better Quality?
Because it contain usefull infos... on your screen.
So without chance to read...
We need Crystal Ball...
Best Regards
Oh... Alternate solution...
Simple write text from screen... and type here...
Oh. Only if you still expect any kind of help.
Click to expand...
Click to collapse
Ok, Its says
CURRENT BINARY : Samsung Official
FRP LOCK : OFF
OEM LOCK : OFF
KG STATUS : Checking (its stuck at checking btw)
WARRANTY VOID : 0x1 (0x30C)
QUALCOM SECUREBOOT : ENABLE
RP SWREV : B7(1,1,1,7,1) K7 S7
SECURE DOWNLOAD : ENABLE
DID : 008C7A2A1880
rylaziusx said:
Ok, Its says
CURRENT BINARY : Samsung Official
FRP LOCK : OFF
OEM LOCK : OFF
KG STATUS : Checking (its stuck at checking btw)
WARRANTY VOID : 0x1 (0x30C)
QUALCOM SECUREBOOT : ENABLE
RP SWREV : B7(1,1,1,7,1) K7 S7
SECURE DOWNLOAD : ENABLE
DID : 008C7A2A1880
Click to expand...
Click to collapse
I see Knox 1
And Qualcomm...
I am Exynos Fanboy...
Anyway. If you not need any data from Phone.
My suggestion. Search correct Firmware for your unknown Model Name... And flash with Tool Odin.
Best Regards
rylaziusx said:
My samsung phone stuck at this screenView attachment 5937173
Click to expand...
Click to collapse
Bricked? Go back to stock via Odin3 like @adfree said.
I suspect your model is a SM-A920F, however you have to find the right firmware corresponding to your region. https://samfw.com/firmware/SM-A920F
adfree said:
I see Knox 1
And Qualcomm...
I am Exynos Fanboy...
Anyway. If you not need any data from Phone.
My suggestion. Search correct Firmware for your unknown Model Name... And flash with Tool Odin.
Best Regards
Click to expand...
Click to collapse
Can be international because phone is not released in US/Canada
adfree said:
I see Knox 1
And Qualcomm...
I am Exynos Fanboy...
Anyway. If you not need any data from Phone.
My suggestion. Search correct Firmware for your unknown Model Name... And flash with Tool Odin.
Best Regards
Click to expand...
Click to collapse
Ok, ill try ( its doesnt boot when i flashed wrong dtbo partition )
I couldnt get my phone to download mode ( plug it to my laptop, hold volume down + power + bixby )
EDIT : fix = no power
guys still doesnt work!
rylaziusx said:
guys still doesnt work!
Click to expand...
Click to collapse
Boot into recovery mode?
A
If no Secret...
Can you try to give more details...
Exact Model Name...
A.1
Firmware you found and what you tried...
Filename...
B
No Power could be also Booltoader dead... but maybe this EDL Firehorse or house or...
Connect to PC and check in Windows Manager... if maybe something is found...
Btw. Windows...
C
I am Windows Fanboy...
So I am using Windows and Windows Odin...
Best Regards
adfree said:
A
If no Secret...
Can you try to give more details...
Exact Model Name...
A.1
Firmware you found and what you tried...
Filename...
B
No Power could be also Booltoader dead... but maybe this EDL Firehorse or house or...
Connect to PC and check in Windows Manager... if maybe something is found...
Btw. Windows...
C
I am Windows Fanboy...
So I am using Windows and Windows Odin...
Best Regards
Click to expand...
Click to collapse
My phone is SM-A920F
I downloaded this firmware : https://samfw.com/firmware/SM-A920F/XXV/A920FXXS7CVH1
I use windows btw
EDIT : Now the phone just stuck in SAMSUNG GALAXY a9 logo and not even showing the blue text
Shows nothing in Windows Device Manager
I put BL in BL, AP in AP, CP in CP, HOME_CSC in CSC
EDIT 2 : I see blue text and SAMSUNG Mobile USB CDC Composite Device in device manager
EDIT 3 : When i press volume up, screen brightness changed up, and the opposite with volume down, and sometime its work, sometime nope
webhook said:
Boot into recovery mode?
Click to expand...
Click to collapse
Not even recovery mode