I created an account here because I need all your help and I've been crawling all over the internet, but I cannot find anything for my problem.
Whenever I charge my phone, I turn it off, shut it off to be exact so that it charges faster. One morning, I woke up and I booted it up, but it won't get past the Samsung logo. It will stay like that for a while, then it will vibrate and will appear at the same screen again. Also, whenever I put the battery on, a green LED will stay on even though the phone is still not on. I cannot access recovery mode, only download mode. My phone is rooted. It has been once submerged in water but no problems. No custom ROMS, but there is a custom recovery that is INACCESSIBLE. I badly need all your help since it makes me feel bad having a $600 paperweight. I have tried leaving the battery out for weeks and almost a month now. Ask me anything and I will try to answer with what I know.
Thank you and I hope for the best. (Cause it made me really sad. :crying,
Robert
Download a stock ROM from sammobile .com
Download ODIN (download and instructions under the download)
Flash stock ROM with the phone in download mode using ODIN
See if it boots, if not, factory reset from recovery
*Detection* said:
Download a stock ROM from sammobile .com
Download ODIN (download and instructions under the download)
Flash stock ROM with the phone in download mode using ODIN
See if it boots, if not, factory reset from recovery
Click to expand...
Click to collapse
I cannot access recovery mode. It says "recovery mode is not seandroid enforced" or something similar, then the screen freezes and returns to its original Samsung logo. The process goes on forever.
Yea, so flash a stock ROM first...
*Detection* said:
Yea, so flash a stock ROM first...
Click to expand...
Click to collapse
Hi *Detection*
Sorry disturbing your wonderful support effort but I would like to provide @hyperfused07 with some links that I consider useful:
To speed up your SamMobile experience, before finding your devices section (that you didn't provide) I suggest using the below tool to perform the download:
[TOOL] SamFirm - Samsung firmware downloader & checker
Just provide Model+Region and it will find you the newer available. Please, before download, check the boxes: CRC32 & Decrypt
Lastest Odin v3.11.1
To use Odin you will have to enter "Download Mode" by pressing: Home + Volume Down + Power buttons
Nice regards.
hyperfused07 said:
I cannot access recovery mode. It says "recovery mode is not seandroid enforced" or something similar, then the screen freezes and returns to its original Samsung logo. The process goes on forever.
Click to expand...
Click to collapse
Kdio said:
Hi *Detection*
Sorry disturbing your wonderful support effort
Click to expand...
Click to collapse
Actually my support effort was perfectly adequate, if OP had read and followed the instructions I provided in my first post
I don't enjoy having to post the same thing twice, especially if OP won't even read it once, hence my shortened 2nd post
Kdio said:
Hi *Detection*
Sorry disturbing your wonderful support effort but I would like to provide @hyperfused07 with some links that I consider useful:
To speed up your SamMobile experience, before finding your devices section (that you didn't provide) I suggest using the below tool to perform the download:
[TOOL] SamFirm - Samsung firmware downloader & checker
Just provide Model+Region and it will find you the newer available. Please, before download, check the boxes: CRC32 & Decrypt
Lastest Odin v3.11.1
To use Odin you will have to enter "Download Mode" by pressing: Home + Volume Down + Power buttons
Nice regards.
Click to expand...
Click to collapse
I don't understand how to use this software.
I put in the Model Number "SM-G9008W"
and region "CHN" (tried CN and CH)
Its says "Could not fetch info for SM-G9008W/CHN. Please verify the input or use manual info"
hyperfused07 said:
I don't understand how to use this software.
I put in the Model Number "SM-G9008W"
and region "CHN" (tried CN and CH)
Its says "Could not fetch info for SM-G9008W/CHN. Please verify the input or use manual info"
Click to expand...
Click to collapse
CHM (China Mobile)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Detection* said:
CHM (China Mobile)
Click to expand...
Click to collapse
Hey, I just finished reflashing my phone, its just stuck at Samsung Logo still with 'Recovery booting' at the top, it loops on forever.
*Detection* said:
CHM (China Mobile)
Click to expand...
Click to collapse
UPDATE: I tried to flash a PIT file, the "Recovery booting" is gone but, my S5 still loops and it's green LED is staying strong.
Related
Hey Guys,
I am trying to return a Galaxy S4 Duos GT-I9502 back to stock, for someone who attempted to root the device, which failed. I am however experiencing some difficulty doing so, and would appreciate some help, if anyone has any suggestions.
This is the screen on the device:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am able to put the device into download mode, though I keep getting this error message when I try flashing the device in Odin.
"Complete(Write) operation failed."
When attempting to flash the device, it quickly goes through boot.img, recovery.img and system.img (when it should take longer for each step, and you should see the little green progress bar move), before failing. Does this mean that Odin is having issues writing to the device?
I am pretty confident that I have the correct Samsung drivers installed, and I have tried completely closing all of the Samsung Kies processes on the computer. I have even tried using a different computer, and two different ROMs.
I have tried flashing the below ROMs:
I9502ZNUBMG2_I9502CHUBMG2_CHU
I9502ZNUAME3_I9502CHUAME3_CHU
I have also tried the 'Firmware upgrade and initialization' option in Samsung Kies, though I keep on getting this error message, before it closes (I do not know what it says, Google translate doesn't give a good translation).
"Binary files are not registered U.S. Congress gyeongmu mouth mid-sprocket
Bow can proceed
Please check the binary file registration myeobu"
Does anyone have any suggestion / idea of what is going wrong? Any help would be highly appreciated!
Never mind, I was able to resolve the issue by re-flashing CWM recovery!
same problem
i have exactly same problem with I9502ZNUBMH4 version , does anyone know how to flash this device because i tried 100 time with different versions of odin , and every time i failed repaird it with cwm .
oh and the device won`t do a full wipe , every time i full wiped it my files didn`t deleted ?!
Samsung S4 GT-I9502 root / flash failed - HELP
Hey Guys,
I tried to root my Samsung S4 GT-I9502 (OS Android 4.3), for that I found this website:
http://marrkdaviid.com/2013/08/fix-caller-id-install-google-play-on-the-galaxy-s4-i9502/
But it failed (see more Information below) and I had the following error message and no wifi.
"Complete(Write) operation failed."
When attempting to flash the device, it quickly goes through boot.img, recovery.img and system.img (when it should take longer for each step, and you should see the little green progress bar move), before failing. Does this mean that Odin is having issues writing to the device?
I live in China and I just bought the phone, I needed 5 days to download the necessary files, because most download pages are blocked in China. So I am loosing my last nerve right now.
I am pretty confident that I have the correct Samsung drivers installed. I don’t have Samsung Kies installed. I have even tried using a different computer (Laptops), and two different ROMs.
I have tried flashing the below ROMs:
I9502ZNUCMG2_I9502CHUCMG2_I9502ZNUCMG2_HOME.tar.md5
I9502ZNUEMK3_I9502CHUEMK3_I9502ZNUEMK3_SVA.tar.md5
Someone with a the same problem tried the 'Firmware upgrade and initialization' option in Samsung Kies, but it didn’t work, so I didn’t try. (Here the link: http://forum.xda-developers.com/showthread.php?t=2382979)
Instead I tried a recovery. I used Odin 3.07 and the following file:
i9502-cwm-recovery.tar.md5
I got my phone back to work for a while, I reset the phone, just in case. But know I can’t switch the Wifi on and the phone wants to Reboot.
So I allowed the phone to Reboot, I clicked on “reboot system now” and then on “Yes – (I forgot what was written behind the Yes, but I didn’t just click on the normal Yes, I clicked on the Yes - …)
The problem here: The Phone changed to a China Unicom Screen and stayed like that. After 5 h I took the battery out, but I couldn’t restart the phone.
So I did an cwm recovery and know I am afraid to reboot. The Wifi is not working and I can’t find any information about how to fix it.
So please help me. Do I reboot? Can I already install SVA ROM, although I couldn’t flash the Stock Firmware? Do I send the phone back and give up?
Please let me know if you need any other information to be able to help me.
PS: This is the first time that I flash a smart phone. And although I already spent several days now, searching the internet for how-to-dos, tips & tricks, guidelines, Q&As and god knows what, I still do not fully understand what exactly I am doing here. Hence, I would be very happy to receive somewhat easy understandable answers.
Thank you so much for your help!
Anna
Philz 6.00.2
I have a similar problem.
I tried to install philz _touch_6.00.2-i9505.tar, by uisng Odin 3.09
Everything went OK. I got PASS! and my Samsung S4 i9505 rebooted into the stock ROM
However I cannot enter Philz. I tried to keep pressed volume Up + Home + Power but the phone goes immediately into the main Samsung screen. I have tried many combinations...the only working combination is:
volume Down + Home + Power > which leads to download mode (for Odin)
Thank you for your suggestions!
SA
Same problem, how did you fix it?
I have the same issue, how did you fix it? It's been a day that I've been trying to fix it. I've got the Exynos version I9500
Hi all, hoping someone can help with this issue;
After rooting and loading CrashRom I had an issue with the pin lock screen not working, followed CR advice and attempted to flash the matching modem as this was the fix. Here's the problem - each time I flash the modem, either via mobileOdin or Odin on PC (tried 1.85, 3.07 & 3.09) recovery states the area it is trying to flash is locked and flash aborted.
Tried to remedy this by changing roms to Omega, didn't work, still have the same modem and same issues trying to flash the matching one (or any other one at that!)
Anyone know why or how to fix this ?!
When you try to flash the modem via odin, you say recovery states it is locked or something, how does it go from download mode to recovery? I have never heard of this before.
celderic said:
When you try to flash the modem via odin, you say recovery states it is locked or something, how does it go from download mode to recovery? I have never heard of this before.
Click to expand...
Click to collapse
Sorry my mistake. Odin flashes and says OK, reboots, does the norm but when you go into settings to check nothing has changed.
Only when using MobileOdin or ZipInstaller - which then goes into recovery to flash - it gives that error
SirRufio said:
Sorry my mistake. Odin flashes and says OK, reboots, does the norm but when you go into settings to check nothing has changed.
Only when using MobileOdin or ZipInstaller - which then goes into recovery to flash - it gives that error
Click to expand...
Click to collapse
It is normal for mobile odin to say that when flashing the modem, it only works with odin.
Power off the phone. Even pull the battery for 15+ seconds, do the button combo for download mode. Volume down, power and home at the same time, press volume up or whatever it is to get into it. Then use odin v3.09 and flash the modem in the cp section
Modems never seem to update if you don't follow these steps, happened many times to me before. See if this fixes your problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit-
Here is the modem i am using.
http://www.androidfilehost.com/?fid=95747613655050238
celderic said:
It is normal for mobile odin to say that when flashing the modem, it only works with odin.
Power off the phone. Even pull the battery for 15+ seconds, do the button combo for download mode. Volume down, power and home at the same time, press volume up or whatever it is to get into it. Then use odin v3.09 and flash the modem in the cp section
Modems never seem to update if you don't follow these steps, happened many times to me before. See if this fixes your problem
Edit-
Here is the modem i am using.
http://www.androidfilehost.com/?fid=95747613655050238
Click to expand...
Click to collapse
Run through all of this, a few times, with all variants of Odin. Tried different ways of getting to D/L mode as well too see if that would work (button combo, 300k, 4 way reboot option!).
I'll attempt it again, using your modem as well as pulling one from an original firmware source and post results later tonight.
SirRufio said:
Run through all of this, a few times, with all variants of Odin. Tried different ways of getting to D/L mode as well too see if that would work (button combo, 300k, 4 way reboot option!).
I'll attempt it again, using your modem as well as pulling one from an original firmware source and post results later tonight.
Click to expand...
Click to collapse
The 4 way reboot option will not work. Modems seem to only flash when the phone is off and is booted to download mode via the button combo, give it a try as this has happened to me many times before when i have gone into download mode from android without powering off the device.
Edit-
You have the N9005? The link i provided is for this device.
celderic said:
The 4 way reboot option will not work. Modems seem to only flash when the phone is off and is booted to download mode via the button combo, give it a try as this has happened to me many times before when i have gone into download mode from android without powering off the device.
Edit-
You have the N9005? The link i provided is for this device.
Click to expand...
Click to collapse
Yeah mate, N9005 FTW
SirRufio said:
Yeah mate, N9005 FTW
Click to expand...
Click to collapse
Good choice! Mine came with the BTU CSC. Got work in an hour, let me know if that method/modem works for you.
With the Note you have to flash the modem a few times for it to take.. It's a strange anomaly in Note devices. I've seen threads where people have flashed them 5/6 times before they've even taken properly.
Sent from my Spectrum ZX +2
celderic said:
Good choice! Mine came with the BTU CSC. Got work in an hour, let me know if that method/modem works for you.
Click to expand...
Click to collapse
Great info celderic! Seems the power off 3 button combo works, thanks mate
SirRufio said:
Great info celderic! Seems the power off 3 button combo works, thanks mate
Click to expand...
Click to collapse
Yes it should work in that way.
My tmobile galaxy s7 got stuck on something like bbl error and in the center of the screen the android logo and the sbl error and upload mode nothing else not able to get on download mode or recovery mode totally stuck need help odin not able to flash anything none of the latest firmware nothing,..
Ehat i did was i flash with odin a verizon firmware or something like fof6 combo firmware with the latest tmobile firmware found on androidfilehost.
My phone is now bricked or what i call softbricked i need any kind of help on how to flash or a tool to forcely flash something to unbrick and be able to restore stock firmware any nice developer please help i still paying this s7 and i really want to revive my phone any help will be greatly appreciated?
I'm no expert by any means, just a dude that was in the same position a few weeks ago.
First you'll want to get ODIN, which is your flashing tool:
http://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
Next you need to find the stock firmware. Lots of sites will have it but 99% of them use some kind of bandwidth throttling crap. The firmware is 4.5gb uncompressed and about 2gb compressed. So if you can find someone hosting the firmware on their Google Drive that's your fastest bet, otherwise it'll take hours or days to download.
The latest firmware at the time of this post is G935TUVU4APIA. You don't necessarily need the latest, you just need to get your phone restored. If there is newer firmware available than what you flash to your phone, when your phone successfully boots you'll get an update to the latest.
Wish I could find a direct link for you but it seems these will always be moving around. That being said search for TMB-G935TUVU4APIA-20160927113301.zip. That was the file I downloaded and it contained the 5 files listed below, which you should extract to your preferred location on your PC:
AP_G935TUVU3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G935TUVU3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935TUVU3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_TMB_G935TTMB3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G935TTMB3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5 (optional)
The first 4 of the 5 listed above are the important ones. The 5th file, "HOME_CSC...", from what I understand preserves your data should you need to flash over a working phone, but we'll ignore that file for this task. Note the "AP", "BL", "CP", etc., at the beginning of each filename - more on that shortly.
Finally, the home stretch.
* Power off your phone completely. If you're boot looping hold VOL DOWN and POWER.
* Boot into recovery mode by pressing and holding VOL DOWN, HOME and POWER at the same time. Release when you see recovery mode warning.
* Connect your phone to your PC.
* Open ODIN and make sure the phone is recognized. It will show up under ID:COM and have some assigned COM port like 9 or 10.
* Click on the BL button and select the BL_G935TUVU3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5 file from your extracted firmware package.
* Repeat this process for AP, CP, and CSC files.
* Once all files are selected click START.
After some time your phone will be flashed with the stock firmware and everything should be back to the way it was when you purchased it. Hope that helps!
---------- Post added at 11:26 PM ---------- Previous post was at 11:20 PM ----------
Sorry man, I can't read! Missed the part where you said you already tried ODIN.
You may want to do a factory reset first before flashing. I think you hold VOL UP, HOME and POWER to get there. Follow the steps to do a factory reset. Then try ODIN again with stock T-Mobile firmware.
tmobile s7 upload mode
the problem here is when I press vol up or vol down it goes straight to this
sbl error upload mode
and Odin detects as download mode but cant not flash anything I do have the latest firmware.
I will attach the picture of the actual error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://imageshack.com/i/pnI8ZKLZj
tmobile s7 upload mode
this was the file I flashed before this happens
found it on android filehost under the search of G930T
https://www.androidfilehost.com/?fid=529152257862666887
it may give some directions thanks
Sorry my friend, wish I could help here. It looks like your bootloader is jacked. Did you mean "sbl" instead "bbl" error? I think that's the secondary bootloader. And from the file you linked it appears you flashed the Galaxy S7 "flat" (G930T) firmware onto your Galaxy S7 Edge (G935T). Never thought that would be a brickable operation but apparently so. Unless someone's dealt with this before your only option may be to return the phone and see if they can either reflash it with some other proprietary tool or exchange it. I don't know how to push the stock boot.bin and sbl.bin onto these phones but maybe someone here does.
tmobile s7 upload mode
yes sir is a flat version of the s7
and what you are saying is correct.
well I will sit and wait for something to come up wit a light thanks...
well I think I fried thos device just gonna sit and wait for a developer to find some source of code to reboot this thing
does anyone knows how to fix this problem " SBL error upload mode " ? please........... thanks
A month or two ago my Note 4 notified me of a software update being available. I told it to go ahead and install. Once it was looking like it was done and went to reboot itself, I ended up getting a screen that said "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I called Samsung for support and after troubleshooting they told me to take the phone to the Samsung kiosk at my local Best Buy. The employees there were unable to fix it. I contacted Samsung again and they said they could reflash the firmware for a fee of $70.13 which I was willing to pay since I love my Note 4. I sent the phone in with the battery per instructions, waited for repair, and when the phone came back it was not fixed. Included was a message saying it was beyond economical repair. How did they know how much I am willing to spend to fix my phone? Also they did not return my battery. I contacted Samsung and They DID end up sending me a battery, but told me they could not fix my phone since it had been rooted. I know for SURE it had not because I bought the phone BRAND NEW. Now I am stuck with a phone that will only turn on to an error screen and don't know what to do.
This is what appears on the screen.
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910P
CURRENT BINARY: Samsung Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (2)
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T3, R1, A4, P1
SECUREDOWNLOAD : ENABLE
UDC START
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Go to sammobile and download the latest firmware for n910p.
Download 'Odin' software aswell.
Extract tge zip thatvyou downloaded from sammobile, you will get a .tar.md5 file.
Then, open odin and click on AP button.
Select your n910p..........md5 file.
It will take time to load, leave it alone, the screen will look as if it is not responding but give it a few minutes.
Once the file is loaded, put the phone in download mode (the one that you shared in the image, is called download mode), connect the phone to pc and press the start button in odin.
Leave the phone and pc for 5-10 min.
Once the flashing process is done, the phone will reboot.
Press volume up+home+power buttons al together for 7 sec, the phone will boot into recovery mode, select the fatory reset option with the volume and power keys.
Then sleect 'reboot system'.
Done.
The phone should not take more than 10 min to boot.
Sent from my SM-N910G using Tapatalk
yashthemw said:
Go to sammobile and download the latest firmware for n910p.
Download 'Odin' software aswell.
Extract tge zip thatvyou downloaded from sammobile, you will get a .tar.md5 file.
Then, open odin and click on AP button.
Select your n910p..........md5 file.
It will take time to load, leave it alone, the screen will look as if it is not responding but give it a few minutes.
Once the file is loaded, put the phone in download mode (the one that you shared in the image, is called download mode), connect the phone to pc and press the start button in odin.
Leave the phone and pc for 5-10 min.
Once the flashing process is done, the phone will reboot.
Press volume up+home+power buttons al together for 7 sec, the phone will boot into recovery mode, select the fatory reset option with the volume and power keys.
Then sleect 'reboot system'.
Done.
The phone should not take more than 10 min to boot.
Sent from my SM-N910G using Tapatalk
Click to expand...
Click to collapse
That's odd. I thought this was the download screen...
Stu Pidaso said:
That's odd. I thought this was the download screen...
Click to expand...
Click to collapse
Yes it is, sorry, my bad.
Were you able to fix your phone?
Sent from my SM-N910G using Tapatalk
yashthemw said:
Yes it is, sorry, my bad.
Were you able to fix your phone?
Sent from my SM-N910G using Tapatalk
Click to expand...
Click to collapse
No. Unfortunately it will only turn on to the screen I originally posted. Unable to get phone to turn on in download mode.
Stu Pidaso said:
No. Unfortunately it will only turn on to the screen I originally posted. Unable to get phone to turn on in download mode.
Click to expand...
Click to collapse
Just download the specific firmware from sammobile and flash it via odin.
The first line says, 'odin mode', that means it will be detected in download mode.
Sent from my SM-N910G using Tapatalk
I have the same problem...can't flash stock firmware with Odin.... please help me...
petra.pavlic5 said:
I have the same problem...can't flash stock firmware with Odin.... please help me...
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=3488114
Flashbtge revovery firmware from this thread.
Read the instructions carefully.
Reporting Via N910G.
I'm 910C version...
I can flash twrp with Odin and custom rom with twrp....But I can't flash official firmware with Odin..
I can't even get it to turn on now.
I have a problem with the device: SM-J510MN/DS. It came to me with the problem. I don't know what was done before.
I installed as per the common guidelines and the problem persists with the messages:
"E: failed to open /dev/block/bootdevice/by-name/misc: No such file or directory"
"E: ensure_path_unmounted failed to unmount /efs (Device or resource busy)"
If I restart, it stops on the screen with the "Samsung" logo in an eternal loop.
Tried Android 6.0.1 and 7.1.1.
I used Odin 3.12; 3.13 and 3.14.
I used TWRP 3.0.2 and 3.5.2.
Tried with FRP HiJacker too.
All forms without success so far.
Ps.: I looked for this in other forums for some weeks, but no get answer yet anyway...
Grateful if anyone can give me a hand!
gersonvagner said:
E: failed to open /dev/block/bootdevice/by-name/misc: No such file or directory"
"E: ensure_path_unmounted failed to unmount /efs (Device or resource busy)"
Click to expand...
Click to collapse
Where does this happen?
LR7875 said:
Where does this happen?
Click to expand...
Click to collapse
Hi. I am not a professional, so sorry, but when I try the "download area" for reinstall the original rom, all go fine. But it dont get in the main screem anyway and go to a "infinit loop" at the Samsung logo. This two messagens apear at the bottom in the "factory reset" menu.
gersonvagner said:
Hi. I am not a professional, so sorry, but when I try the "download area" for reinstall the original rom, all go fine. But it dont get in the main screem anyway and go to a "infinit loop" at the Samsung logo. This two messagens apear at the bottom in the "factory reset" menu.
Click to expand...
Click to collapse
So the phone just died on the Samsung logo and those words appears there?
Send me the words that appears on the download mode screen, that may help.
Here, is this menu on the bottom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First install 'TWRP' software, this will allow you to install a custom system.
[RECOVERY][TWRP][J510][AROMA] 3.1.1-0 for J5**2016 [UPDATED MTP-OK!]
TWRP 3.1.1-0 for Samsung Galaxy J5 2016 with Aroma support by Lemlis ------------------------------------------------- J510FN--OK! J510GN--OK! J510MN--OK! J510H--OK! J510F--OK! ------------------------------------------------- Description...
forum.xda-developers.com
Disable auto reboot at odin options.
LR7875 said:
First install 'TWRP' software, this will allow you to install a custom system.
[RECOVERY][TWRP][J510][AROMA] 3.1.1-0 for J5**2016 [UPDATED MTP-OK!]
TWRP 3.1.1-0 for Samsung Galaxy J5 2016 with Aroma support by Lemlis ------------------------------------------------- J510FN--OK! J510GN--OK! J510MN--OK! J510H--OK! J510F--OK! ------------------------------------------------- Description...
forum.xda-developers.com
Disable auto reboot at odin options.
Click to expand...
Click to collapse
I tried with "I used TWRP 3.0.2 and 3.5.2.", as I say. But the same problem persists. Some especifc version can you tell me?
Well, I will try the post, and I will back to tell.
Immediately power off and press volume up +home+power after Odin success flashing.
LR7875 said:
Immediately power off and press volume up +home+power after Odin success flashing.
Click to expand...
Click to collapse
No work yet...
By the way , you tried flashing stock ROM, Odin says success, and the phone died in the boot screen?
LR7875 said:
By the way , you tried flashing stock ROM, Odin says success, and the phone died in the boot screen?
Click to expand...
Click to collapse
Sorry... I dont know if I understand what you mean...
First of all, sorry about my english, its not my first language, but I am trying! Sorry if I am sounds rude...
And Im not a professional, just trying to recover my wife celphone! haha
But Im think that the problem is the FRP... and I am stuck here...
I tryed to instal the original rom with Odin and I try the TWRP, but when I reboot, stuck in a eternal loop on the logo Samsung and the problems with the E: partition persist...
I tryed the post that you indicated, but it doesn't even finish successfully, as in the print.
Install rom is successfully!
But stuck in Samsung logo and, when Im going to recovey menu, the same problem with E: partition persist...
What Im forgoten?!?!?!
Seems like your bootloader is locked so you cannot flash TWRP.
What shows up on Samsung logo?
LR7875 said:
Seems like your bootloader is locked so you cannot flash TWRP.
What shows up on Samsung logo?
Click to expand...
Click to collapse
Nothing more, just the logo in a infinity loop.
Try enabling repartition in odin options while flashing stock ROM
LR7875 said:
Try enabling repartition in odin options while flashing stock ROM
Click to expand...
Click to collapse
I don't know, this is a bit dangerous, especially for inexperienced ones like me. I've read several articles about this option and it's not just click and be happy...
So, I tried this tutorial bellow after many more readings and the problem remains the same even after I tried it through Odin successfully.
https://technastic.com/odin-nand-erase-samsung/
If someone have any other idea...
did u get solution of this problem
gersonvagner said:
So, I tried this tutorial bellow after many more readings and the problem remains the same even after I tried it through Odin successfully.
https://technastic.com/odin-nand-erase-samsung/
If someone have any other idea...
Click to expand...
Click to collapse
did u get solution of this problem?
dafvad said:
did u get solution of this problem?
Click to expand...
Click to collapse
Not yet...
Its very sad, cause the celphone is relative new, but it stayed in the desk... dead.