Database Users

[Q] my phone game over...?

please help...i think my phone get a very hard brick...i will explain..,yesterday i unlocking my bootloader and succes..,i use gdx ver14..,i had custom my kernel with a linux dx and its succes ,and then i try to change the custom kernel with fdx with overclock 760mhz ,and the problem its start..my phone cant boot ,just stuck in fdx logo..,and iam very stupid i click restore button on the s1tool..and the bootloader its lock again...,and now my phone can not boot again..only the indicator light its not dead..everthing its dead...,can any body can help me...how can i rescue my phone?....i am very need help now...please help me....thank you .

pull out the battery, put it in, don't turn on the phone, use pc companion or flashtool and repair your phone
edit: you can download flashtool and firmwares here: http://forum.xda-developers.com/showthread.php?t=1011071
or download stock kernel from here: http://forum.xda-developers.com/showthread.php?t=1254225

Unlock your bootloader and put stock kernel. Then use flashtool to provide stock ROM. You could use links from fifo171 post. After that your phone should boot. My phone once stuck on SE logo for about 10 minutes and then flawlessly boot. Don't panic

my situasition its not easy...my phone still dead now...how can i unlock boot loader again if my phone cant life..boot loader need enable usb debugging..,and how can i flash my phone kernel if my bootloader still unlocking,and the pc companion se cant reconise my x8...,any other way my xda friend...i am very need a right solution....hiks hiks hiks....

sukartochen said:
my situasition its not easy...my phone still dead now...how can i unlock boot loader again if my phone cant life..boot loader need enable usb debugging..,and how can i flash my phone kernel if my bootloader still unlocking,and the pc companion se cant reconise my x8...,any other way my xda friend...i am very need a right solution....hiks hiks hiks....
Click to expand...
Click to collapse
Does your screen still show anything?
My only advise is send to warranty,if you still able to.

back to SE Stock rom via Seus

Do what fifo171 said.. To repair your phone, keep it turned off, press the back key and don't release it, plug your usb cable in the phone and the program will recognize it..you can now release the back button and follow the instructions on the computer.
Sent from my E15i using XDA App

My screen cant show anything
Sent from my GT-S5660 using XDA App

sukartochen said:
My screen cant show anything
Sent from my GT-S5660 using XDA App
Click to expand...
Click to collapse
We know, but the computer can repair it like that.
Sent from my E15i using XDA App

Thank u fifo...my phone its alive after i read carefully you link..,yes my phone alive now..i find how to solve my phone with you link..,and the lol thing yesterday i had buy another android phone. .,thank u and the others who give me a suggestion...i very appreciate its..
Sent from my GT-S5660 using XDA App

Nikkopt said:
We know, but the computer can repair it like that.
Thank u you nikkopt...
Sent from my E15i using XDA App
Click to expand...
Click to collapse
Sent from my GT-S5660 using XDA App

About the connection problem... we mention it many times... as someone mention it hold down back button... its the same method we used to use with older no smart phones of se... this dont boot your phone like the on off button.

[Q] i think i bricked my phone please help

i think my phone is bricked. after flashing mike's MIUI 4.0 rom i rebooted it and when its starts up it shows the white LG logo then goes blank like in fastboot mode, won't go further than that even if i wait almost an hour. i tried connecting it to my pc with fastboot mode and my pc still recognizes so what do i do to make it work again. i really need your help guys!

G69D said:
i think my phone is bricked. after flashing mike's MIUI 4.0 rom i rebooted it and when its starts up it shows the white LG logo then goes blank like in fastboot mode, won't go further than that even if i wait almost an hour. i tried connecting it to my pc with fastboot mode and my pc still recognizes so what do i do to make it work again. i really need your help guys!
Click to expand...
Click to collapse
Thats nota a brick, a brick is: nothing works at all.
Search in the forum how to recover it via recovery mode.
Many threads in development area.
Sent from my LG-P920 using xda premium

Install any rom via recovery will solve your issue.
Sent from my GT540 using xda premium

[Q] xolo 8x 1000 bricked

hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me

sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive

sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Hi did you solve the problem as i am facing the same problem now

Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me

samouha20041 said:
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me
Click to expand...
Click to collapse
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.

but its not turning on or charging ,,,,its completely dead and when i plug the usb it immediately gives usb not recognized
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Tech N You said:
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.
Click to expand...
Click to collapse
but its completely dead and not charging at all and when i plug the usb it immediately gives usb not recognized<<<and i tried it on 2 different pc with different os

Bricked xolo 8x 1000.....
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????

8x 1000 recovery
At first download clockword recovery from xda for xolo 8x 1000
Pur the downloaded file in memory card , not in any folder
Then download mobile uncle tool and install clock word recovery mode
It will change ur recovery mod . then download stock ROM of xolo 8x 1000 from xda
Go to ur phone recovery page install the xolo8x 1000 stock ROM from ur memory card and then switch on ur phone it will work.:good:

Xolo 8x 1000 bricked while SPtool flashing
aniket_here said:
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????
Click to expand...
Click to collapse
did your problem resolved?
mine is also bricked while flashing stock rom.

Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted

hi,
are you guys still facing issues with your xolo devices ?
If yes then you can download stock rom for xolo devices from following link: http://androidxda.com/download-xolo-stock-rom-model

Bricked
Pls help me:crying:

xolo 8x 1000 clone Hard bricked, dead, not charging, nothing
Ravindra123 said:
Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted
Click to expand...
Click to collapse
good day, pls my infinix zero, which is a xolo 8x 1000 clone is bricked, long story, i used sp tool, clicked download, plugged in phone, pressed volume, and then the download was 100%, but got a message cant remember the message. tried flashing again with same method but no response. currently the phone does not charge, cant come on, no recovery mode, the only thing is wen plugged to pc, i hear that usb device soun. and i can find the VCOM port stuff in device manager, please i need help

Plzz help me
Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
I have xolo 8x 1000
so i was trying to flash a stock rom on my xolo
but unfortunately I selected wrong scatter file ie MIcromax a117
then sp flash tool started & red progress bar with 100% appeared then it stopped
and my xolo bricked
but then I selected the correct scatter file now when I am trying to flash it sp flash wont detect at all I mean I wont startup even though my pc alerts me that a device is connected
as vcom driver my phone is connected but I am not getting what to do plzz help me

help me please I have bricked my phone

I have bricked my phone
While flashing the rom it shows 'PMT error '
Please help me of with this
I downloaded many stock rom file From different website
It's shows the same error And usb debugging is disable on the phone when it
Got bricked Plz help me out
Phone Modle : MIcromax A120 (canvas 2 colours)
please help asap
Thanks!

Try to Format if first in the 'Format' tab then flash it. Doesn't matter if USB debugging is on or not

Dead phone
MaxisMan said:
Try to Format if first in the 'Format' tab then flash it. Doesn't matter if USB debugging is on or not
Click to expand...
Click to collapse
My phone is dead it wont start up I used Smart phone flash tool (Runtime trace Mode) and I have downloaded it from youtube. and after that my phone didn't started for once. When I connet my phone to my system without battery my system sounds of devices connected but after a min it sounds for device disconneted.
I'm stuck here please anyone help out I'm in hurry..

this may help you a lot try explore bro
http://smokermanxda.blogspot.nl/2015/09/all-roms-wiko-rainbow-micromax-a120.html?m=1
Sent from my Rainbow using XDA Free mobile app

my mobile canvas 2 colours is not working Factory reset loop
my mobile is not working factory reset is looping
when i push the power botton shows android then starts factory reset loop repeating how can i repair my phone

Sorry to say but being oversmart with mobile phone cause the brick dead.
I am one of them.
I enjoyed changing rom every week..as any new rom posted.
One day my phone started force stopping apps ,i thought what's the big deal let's flash phone again.
My phone was on vionic L rom,tried to format and flash the cystom rom for C2C and i m done.
In flashing after downloading boot loader the process of download gets error..some no space error.
I give it in the repairig but it was not going to repair..its now in my cupboard in dead situation.. now on moto g2.
If you are enjoying changing rom ,increased internal storage capacity and your phone is still working
Simply stop doing this and stick to your stock rom

Chinmayhegde said:
my mobile is not working factory reset is looping
when i push the power botton shows android then starts factory reset loop repeating how can i repair my phone
Click to expand...
Click to collapse
flash firmware thats all via spft
Sent from my Rainbow using XDA Free mobile app

Micromax Canvas 2 A120 - Phone not moving beyond logo when switched on

Hi Everybody !
Recently my Micromax Canvas 2 A120 is troubling me a lot. The problems I am facing with my phone is :
– phone hangs while bootup
– Phone working very slow
– Programs keep crashing
– Phone not moving beyond logo when switched on
Now my phone is not moving beyond Micromax log when it is switched on.... I tried SP flash tool to get out of from this but it couldn't worked out. In instructions it is mentioned that phone debugging should be in on mode while phone is flashing... but my phone is not at all moving beyond logo when it is switched on.... How could I do then.
Your suggestions will be appreciated for bringing me out of this situation (dont suggest me to contact service center please )
Yugandhar

yugandhar5584 said:
Hi Everybody !
Recently my Micromax Canvas 2 A120 is troubling me a lot. The problems I am facing with my phone is :
– phone hangs while bootup
– Phone working very slow
– Programs keep crashing
– Phone not moving beyond logo when switched on
Now my phone is not moving beyond Micromax log when it is switched on.... I tried SP flash tool to get out of from this but it couldn't worked out. In instructions it is mentioned that phone debugging should be in on mode while phone is flashing... but my phone is not at all moving beyond logo when it is switched on.... How could I do then.
Your suggestions will be appreciated for bringing me out of this situation (dont suggest me to contact service center please )
Yugandhar
Click to expand...
Click to collapse
It doesn't matter whether the usb debugging mode on or off..
Proceed to flashing steps without any hesitation..

niyas90 said:
It doesn't matter whether the usb debugging mode on or off..
Proceed to flashing steps without any hesitation..
Click to expand...
Click to collapse
It is not working, after opening Smart Phone Flash Tool (Runtime Trace Mode)V3.1344.214 loaded scatter file and entered download button.... but at the end the progress bar is not moving further.... means its not working...

Connect the phone without battery after pressing the download button in sp flash tools
If not working install the correct mtk drivers.. Google it.

install tino driver google it . disbale antivirus . use update spft
Sent from my Rainbow using XDA Free mobile app