Micromax Canvas 2 A120 - Phone not moving beyond logo when switched on - Micromax A120 Canvas 2 Colors

Hi Everybody !
Recently my Micromax Canvas 2 A120 is troubling me a lot. The problems I am facing with my phone is :
– phone hangs while bootup
– Phone working very slow
– Programs keep crashing
– Phone not moving beyond logo when switched on
Now my phone is not moving beyond Micromax log when it is switched on.... I tried SP flash tool to get out of from this but it couldn't worked out. In instructions it is mentioned that phone debugging should be in on mode while phone is flashing... but my phone is not at all moving beyond logo when it is switched on.... How could I do then.
Your suggestions will be appreciated for bringing me out of this situation (dont suggest me to contact service center please )
Yugandhar

yugandhar5584 said:
Hi Everybody !
Recently my Micromax Canvas 2 A120 is troubling me a lot. The problems I am facing with my phone is :
– phone hangs while bootup
– Phone working very slow
– Programs keep crashing
– Phone not moving beyond logo when switched on
Now my phone is not moving beyond Micromax log when it is switched on.... I tried SP flash tool to get out of from this but it couldn't worked out. In instructions it is mentioned that phone debugging should be in on mode while phone is flashing... but my phone is not at all moving beyond logo when it is switched on.... How could I do then.
Your suggestions will be appreciated for bringing me out of this situation (dont suggest me to contact service center please )
Yugandhar
Click to expand...
Click to collapse
It doesn't matter whether the usb debugging mode on or off..
Proceed to flashing steps without any hesitation..

niyas90 said:
It doesn't matter whether the usb debugging mode on or off..
Proceed to flashing steps without any hesitation..
Click to expand...
Click to collapse
It is not working, after opening Smart Phone Flash Tool (Runtime Trace Mode)V3.1344.214 loaded scatter file and entered download button.... but at the end the progress bar is not moving further.... means its not working...

Connect the phone without battery after pressing the download button in sp flash tools
If not working install the correct mtk drivers.. Google it.

install tino driver google it . disbale antivirus . use update spft
Sent from my Rainbow using XDA Free mobile app

Related

[Q] BOOT-LOOP problem On The device ZTE V970(Parallel To "Garnd X")

Hi there ,
I came to you after a lot of searching for a place that maybe can help me in case problematic.
I have a device from the famous " ZTE " .
About a month ago the device started to make himself turning on and off and then suddenly shuts down once more and since than he never turn on again.
What happens is that I turn on the device is coming up with the company logo and again and again.
The device has a root and recovery - and when I press the power button and volume up button device comes to recovery .
I tried almost everything,to replace Rom , delete everything from the device through recovery ( WIPE ) and even tried to burn the original stock Rom device company's computer via flashtools - but without success ( in my opinion the problem is Drivers - computer fails to recognize the device ) .
I already went to a lot of labs in my country, but none of them agreed to help me / could not help me.
Htiitzati with a lot of savvy people and they say that the problem is hardware - and not in parts.
Is there any chance you could help me?
Sagi .
UP - i must to get help !
sagi98 said:
UP - i must to get help !
Click to expand...
Click to collapse
How about you post on the right section?
This is zte blade, it has nothing to do with zte v970
Check my sig, to install custom roms, and recovery

[Q] xolo 8x 1000 bricked

hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Hi did you solve the problem as i am facing the same problem now
Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me
samouha20041 said:
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me
Click to expand...
Click to collapse
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.
but its not turning on or charging ,,,,its completely dead and when i plug the usb it immediately gives usb not recognized
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Tech N You said:
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.
Click to expand...
Click to collapse
but its completely dead and not charging at all and when i plug the usb it immediately gives usb not recognized<<<and i tried it on 2 different pc with different os
Bricked xolo 8x 1000.....
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????
8x 1000 recovery
At first download clockword recovery from xda for xolo 8x 1000
Pur the downloaded file in memory card , not in any folder
Then download mobile uncle tool and install clock word recovery mode
It will change ur recovery mod . then download stock ROM of xolo 8x 1000 from xda
Go to ur phone recovery page install the xolo8x 1000 stock ROM from ur memory card and then switch on ur phone it will work.:good:
Xolo 8x 1000 bricked while SPtool flashing
aniket_here said:
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????
Click to expand...
Click to collapse
did your problem resolved?
mine is also bricked while flashing stock rom.
Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted
hi,
are you guys still facing issues with your xolo devices ?
If yes then you can download stock rom for xolo devices from following link: http://androidxda.com/download-xolo-stock-rom-model
Bricked
Pls help me:crying:
xolo 8x 1000 clone Hard bricked, dead, not charging, nothing
Ravindra123 said:
Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted
Click to expand...
Click to collapse
good day, pls my infinix zero, which is a xolo 8x 1000 clone is bricked, long story, i used sp tool, clicked download, plugged in phone, pressed volume, and then the download was 100%, but got a message cant remember the message. tried flashing again with same method but no response. currently the phone does not charge, cant come on, no recovery mode, the only thing is wen plugged to pc, i hear that usb device soun. and i can find the VCOM port stuff in device manager, please i need help
Plzz help me
Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
I have xolo 8x 1000
so i was trying to flash a stock rom on my xolo
but unfortunately I selected wrong scatter file ie MIcromax a117
then sp flash tool started & red progress bar with 100% appeared then it stopped
and my xolo bricked
but then I selected the correct scatter file now when I am trying to flash it sp flash wont detect at all I mean I wont startup even though my pc alerts me that a device is connected
as vcom driver my phone is connected but I am not getting what to do plzz help me

[Q] Q700 not booting and continuously loops in boot screen

Hi Friends ..
I have a peculiar issue with my Q700. Automatically my phone switched off yesterday night and when i switch on the phone it comes to boot screen stays for a seconds and switches off.. if i put it in charging, it continuously loops in boot screen. When i tried to factroy reset it says it is being disabled by XOLO SECURE.
How to restore my phone and i need the backup of my data...
thanks..
NRS
Then u can try sp flash tool to flash stock rom, but all ur data on phone will lost.
One more possibility is that password for xolo secure may be in ur mail box, check ur mail
Sent from my Q3000 using XDA Free mobile app
sachin.r.fulzele said:
Then u can try sp flash tool to flash stock rom, but all ur data on phone will lost.
One more possibility is that password for xolo secure may be in ur mail box, check ur mail
Sent from my Q3000 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks Again for the reply.
I know the password of XOLO SECURE but i could not boot in to disable the feature..
can you please tell me how to access XOLO SECURE with boot loop issue..
Thanks
NRS
Use sp flash tool n flash stock rom for xolo q 700
Sent from my Q3000 using XDA Free mobile app
sachin.r.fulzele said:
Use sp flash tool n flash stock rom for xolo q 700
Sent from my Q3000 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the reply .
My winows 8 pc does not detect my phone when i connect through USB cable.moreover it is continuously in boot loop (displays logo ,switch off, displays logo,and again the same). tell me how to flash the stock rom
nrsaran said:
Thanks for the reply .
My winows 8 pc does not detect my phone when i connect through USB cable.moreover it is continuously in boot loop (displays logo ,switch off, displays logo,and again the same). tell me how to flash the stock rom
Click to expand...
Click to collapse
Solved:
I installed the mediatek drivers in windows 8.1 by follwing this link.
http://thebroodle.com/android/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
then i flashed the STOCK ROM and the problem got solved though my data are lost.

Hard Bricked Yureka...Need Urgent Help

Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
But my phone does not boot into fastboot
Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794
HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.
Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Exactly me too flashed miui of f2 without boot.img..Was trying to port...
@ Suhas Is the new phone same as old one or a used one??
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb
quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip
Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.
my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..
You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help
my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls
my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:
issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.

help me please I have bricked my phone

I have bricked my phone
While flashing the rom it shows 'PMT error '
Please help me of with this
I downloaded many stock rom file From different website
It's shows the same error And usb debugging is disable on the phone when it
Got bricked Plz help me out
Phone Modle : MIcromax A120 (canvas 2 colours)
please help asap
Thanks!
Try to Format if first in the 'Format' tab then flash it. Doesn't matter if USB debugging is on or not
Dead phone
MaxisMan said:
Try to Format if first in the 'Format' tab then flash it. Doesn't matter if USB debugging is on or not
Click to expand...
Click to collapse
My phone is dead it wont start up I used Smart phone flash tool (Runtime trace Mode) and I have downloaded it from youtube. and after that my phone didn't started for once. When I connet my phone to my system without battery my system sounds of devices connected but after a min it sounds for device disconneted.
I'm stuck here please anyone help out I'm in hurry..
this may help you a lot try explore bro
http://smokermanxda.blogspot.nl/2015/09/all-roms-wiko-rainbow-micromax-a120.html?m=1
Sent from my Rainbow using XDA Free mobile app
my mobile canvas 2 colours is not working Factory reset loop
my mobile is not working factory reset is looping
when i push the power botton shows android then starts factory reset loop repeating how can i repair my phone
Sorry to say but being oversmart with mobile phone cause the brick dead.
I am one of them.
I enjoyed changing rom every week..as any new rom posted.
One day my phone started force stopping apps ,i thought what's the big deal let's flash phone again.
My phone was on vionic L rom,tried to format and flash the cystom rom for C2C and i m done.
In flashing after downloading boot loader the process of download gets error..some no space error.
I give it in the repairig but it was not going to repair..its now in my cupboard in dead situation.. now on moto g2.
If you are enjoying changing rom ,increased internal storage capacity and your phone is still working
Simply stop doing this and stick to your stock rom
Chinmayhegde said:
my mobile is not working factory reset is looping
when i push the power botton shows android then starts factory reset loop repeating how can i repair my phone
Click to expand...
Click to collapse
flash firmware thats all via spft
Sent from my Rainbow using XDA Free mobile app

Categories

Resources