Related
Hi everyone, I'm sorry if I am posting at wrong place but I need your help !
Yesterday my Blu Studio 5.0s has frozen and I've tried for a hard reset, till there, ok !
but after hard reset my phone died !
YES, the phone do not start up, do not light up, can't put on recovery mode, don't charge, it's totally bricked :crying:
could someone PLEASE help me ?
this kind of thing never has happened with me before :crying:
Try to contact a Blu Store for your Country... I have a Backup original stock from my phone but you can't restore via Fastboot...
Also try to download Stock Firmware from another cellphone like Karbonn... visit that link...
http://forum.xda-developers.com/showthread.php?t=2498992
The best rom for me, is Concur One...
not work :/
davidequiz said:
Try to contact a Blu Store for your Country... I have a Backup original stock from my phone but you can't restore via Fastboot...
Also try to download Stock Firmware from another cellphone like Karbonn... visit that link...
http://forum.xda-developers.com/showthread.php?t=2498992
The best rom for me, is Concur One...
Click to expand...
Click to collapse
Thank you for help my frien but I've tried, but that's not working,
my problem is:
I've put phone in recovery mode, then I've plugged on Windows so Windows asked me to format device and I hit yes
since then, my phone is died . don't turn on, do not charge ... by this way windows no longer recognise my device
and by the way, I can't flash the phone :/
don't know if I'll can fix this problem ...
and on my country, have no Blue Store or assistance
felipemichelr said:
Thank you for help my frien but I've tried, but that's not working,
my problem is:
I've put phone in recovery mode, then I've plugged on Windows so Windows asked me to format device and I hit yes
since then, my phone is died . don't turn on, do not charge ... by this way windows no longer recognise my device
and by the way, I can't flash the phone :/
don't know if I'll can fix this problem ...
and on my country, have no Blue Store or assistance
Click to expand...
Click to collapse
The battery not empty?
Try charging the battery use ebc...
the battery is full charged !
glori2 said:
The battery not empty?
Try charging the battery use ebc...
Click to expand...
Click to collapse
see friend, the problem isn't with the battery, I've tried many others ...
the real reason is 'cause I hit format device and it has formatted all partitions from the phone ...
does anyone know how to fix ?
My stock recovery won't load. Any suggestions?
Sent from my BLU STUDIO 5.0 using Tapatalk
stock ROM
I have never been able to find a stock ROM for Blu devices. I tried finding one for my Blu Studio 5.5s and Bluproducts Support says you must mail your phone to the repair center, that they will not supply ROMs for their phones. Sad situation.
Also it's too late to warn you but anytime you connect a USB device that is known to work, even a little bit, when WIndows says that something needs formatting, NEVER do it, it usually means that there is a problem communicating that Windows believes is an unformatted memory card. This is hardly ever the case.
I guess we are on our own with these Blu phones until either they either take off in popularity and we see more recovery tools or they quite making them and after we have bricked them all due to lack of recovery tools.
Blu Factory Default Recovery for BLU 5.0 2/ 5.5s
Hello BLU User of 5.0 2/ 5.5s
Okay the first thing I will say " DO NOT..... I REPEAT.... DO NOT USE ANY Version OF AIO FLASHER "
because the program is a real B.S flasher.... 1. it hangs like crazy
2. their is no progress bar/ status bar
3. the only real thing that works is backup
4. all partition on drive is NOT PROTECTED
Meaning all partition will be erased if you f-up
hit yes when you should have press NO..
now with all that said both phone are great 5.0 2/ 5.5s
I Already Brick the crap out of Blu 5.0 2, Now I have the Blu 5.5s
All I want to do is Drop CWM on it..... to no avail..
I Can tell you this....... I manage to f-up the stock default recovery
so now there is no default recovery for on a brand new phone
I got it rooted no prob... all of my backup come without default
recovery..
the Question is how can i recreate the default recovery partition
on main system memory card or would it be possible to create that
partition on my 64G SDCARD Via the Computer ?
Edit:
Fixed: Reflash Preloader / EMI from original ROM - Boot into Factory menu (Not Recovery) Turn off the phone.
Start SPFlashTool - Select Scatter.txt (Make sure its Scatter from the Original ROM) - Flash Original FULL Rom - Reflash Boot/Recovery/Pre Entire ROM -
Adb Install Update
Done!
---------------------------
I have managed to brick the Blu Studio X today using SPFlashTool.
EMI Obtain DRAM Fail.
This started when I replaced Factory recovery with CWM which turned out to be even worst than Factory. I got it Rooted without issue but in an effort to Flash back to Stock Recovery, I was unsuccessful.
The phone is detected by the PC now but I cannot do anything. The battery is integrated also.
What I need is the entire Blu Stock ROM including the Preloader. Without this, I cannot Unbrick it. Any help or ideas would be great.
Very urgent please, how do I get into bootloader (factory menu) without going through recovery? My D830u is in a Blu logo boot loop without recovery or anything. I need fastboot mode
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Hi did you solve the problem as i am facing the same problem now
Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me
samouha20041 said:
Hi ,,i am having the same problem ,,,,when i try to plug the phone it gives usb not recognized ,,,so are you sure its only a charging problem as my phone was 85% charged when this problem happened ,,,kindly advice me
Click to expand...
Click to collapse
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.
but its not turning on or charging ,,,,its completely dead and when i plug the usb it immediately gives usb not recognized
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
sudharshan said:
hey folks..
today i tried to root my xolo 8x 1000..
with sp flash tools i tried to flash TWRP recovery
something went wrong..
and my mobile is not turning on..
i tried to flash again.
but when im trying to connect my mobile to my pc
it is saying that
"usb not recognized"
please help me
Click to expand...
Click to collapse
Tech N You said:
Problem is with USB Port change the port/USB Cable and try again and root now without PC using "kingroot.apk" make sure to turn off wifi/data before rooting. Thanks to @bgos10 for this method.
Click to expand...
Click to collapse
but its completely dead and not charging at all and when i plug the usb it immediately gives usb not recognized<<<and i tried it on 2 different pc with different os
Bricked xolo 8x 1000.....
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????
8x 1000 recovery
At first download clockword recovery from xda for xolo 8x 1000
Pur the downloaded file in memory card , not in any folder
Then download mobile uncle tool and install clock word recovery mode
It will change ur recovery mod . then download stock ROM of xolo 8x 1000 from xda
Go to ur phone recovery page install the xolo8x 1000 stock ROM from ur memory card and then switch on ur phone it will work.:good:
Xolo 8x 1000 bricked while SPtool flashing
aniket_here said:
i just cleaned 1st rom & tried to install HIVE rom again,it said installation aborted...
So i just rebooted my phone
the problem is now i haven't any rom or OS in phone,so it just cant start and can't do anything...
I got my mistake and problem, but is there any chance to get my phone back???????
Click to expand...
Click to collapse
did your problem resolved?
mine is also bricked while flashing stock rom.
Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted
hi,
are you guys still facing issues with your xolo devices ?
If yes then you can download stock rom for xolo devices from following link: http://androidxda.com/download-xolo-stock-rom-model
Bricked
Pls help me:crying:
xolo 8x 1000 clone Hard bricked, dead, not charging, nothing
Ravindra123 said:
Hi I can solve the problem just follow it
1) Do not charge the device,if charged then leave it for 2 days (press the power button for 20sec) do not touch the mobile OK
2) after that install the adb drivers try to install from varioussite
3) now take the mobile when the battery is fully drained
4) charge it for 10minutes or 15min
5) after download the so tool and firmwaxdafor xxda
6) now follow the procedure given by xda
7) do not connect the mobile to PC ,connect it after pressing the download button
8)remember device should charged for 10 to 15 minutes
Congrats the device will get sta:laugh:rted
Click to expand...
Click to collapse
good day, pls my infinix zero, which is a xolo 8x 1000 clone is bricked, long story, i used sp tool, clicked download, plugged in phone, pressed volume, and then the download was 100%, but got a message cant remember the message. tried flashing again with same method but no response. currently the phone does not charge, cant come on, no recovery mode, the only thing is wen plugged to pc, i hear that usb device soun. and i can find the VCOM port stuff in device manager, please i need help
Plzz help me
Tech N You said:
Don't worry. Just charge your device overnight and then switch it on. Same thing happend to me and I ran to service center to get it fixed where it was just not charged :silly:
Just do it and follow this guide to root Xolo Hive 8x-1000 How to Root Xolo Hive
Click to expand...
Click to collapse
I have xolo 8x 1000
so i was trying to flash a stock rom on my xolo
but unfortunately I selected wrong scatter file ie MIcromax a117
then sp flash tool started & red progress bar with 100% appeared then it stopped
and my xolo bricked
but then I selected the correct scatter file now when I am trying to flash it sp flash wont detect at all I mean I wont startup even though my pc alerts me that a device is connected
as vcom driver my phone is connected but I am not getting what to do plzz help me
Hy Guys,
I have tryed to put the rom from Gionee Elife E7 on my Blu life pure XL. The installation occurs everything okay, but when i try to install the recovery, my phone reboot, and never more turn on again... I only can see the Gionee logo, but then shutdown after that. When i try to connect on the PC, just two drivers are showed to me:
-Gionee HS-USB Diagnostics (COM5)
-Qualcomm MMC Storage USB Device
I can enter in ADB mode, but i have no way to acess the internal storage...
Any help will be grateful...
sampadf said:
Hy Guys,
I have tryed to put the rom from Gionee Elife E7 on my Blu life pure XL. The installation occurs everything okay, but when i try to install the recovery, my phone reboot, and never more turn on again... I only can see the Gionee logo, but then shutdown after that. When i try to connect on the PC, just two drivers are showed to me:
-Gionee HS-USB Diagnostics (COM5)
-Qualcomm MMC Storage USB Device
I can enter in ADB mode, but i have no way to acess the internal storage...
Any help will be grateful...
Click to expand...
Click to collapse
when u installed the rom did the phone start up properly?
This look's bad man.
Try power on your phone then
Plugin into your computer.
Open adb then type adb devices
When your device is listed type adb reboot recovery
If IT doesn't boot in recovery mode then You should try flashing again the rom.
Something should work.
Sent from my E7 using Tapatalk
have you fixed it? perhaps i can help
if you've got fastboot (power + vol -)
you can fastboot (sort of like an adb) flash some system images and get your phone getting recognised by gnqc
you need :
ADB
boot.img from blu rom
system1.img from blu
right click on folder where adb and files are (they need to be on same folder for faster tipying)
write
fastboot flash system system1.img
fastboot boot boot.img
after that unplug phone, you need the drivers for blu, change cable from pc port and reconect to see if now it's recognized as a pure xl and check for the drivers.
It should install 2 com ports (hsusb, nmea) 1 adb, 1 modem and 1 storage
that is what i did to mine, hope it works on yours
dzamora said:
if you've got fastboot (power + vol -)
you can fastboot (sort of like an adb) flash some system images and get your phone getting recognised by gnqc
you need :
ADB
boot.img from blu rom
system1.img from blu
right click on folder where adb and files are (they need to be on same folder for faster tipying)
write
fastboot flash system system1.img
fastboot boot boot.img
after that unplug phone, you need the drivers for blu, change cable from pc port and reconect to see if now it's recognized as a pure xl and check for the drivers.
It should install 2 com ports (hsusb, nmea) 1 adb, 1 modem and 1 storage
that is what i did to mine, hope it works on yours
Click to expand...
Click to collapse
this helped me but now i have another problem phone starts up then reboots sometimes it reboots in the middle of starting up i can get into stock recovery but i have no idea what to do now
jetboss said:
this helped me but now i have another problem phone starts up then reboots sometimes it reboots in the middle of starting up i can get into stock recovery but i have no idea what to do now
Click to expand...
Click to collapse
Ok now, you can use GNQC and flash the rom and that will completely restore your phone
NOw if only i could find the blu rom for a 16gb blu
dzamora said:
Ok now, you can use GNQC and flash the rom and that will completely restore your phone
NOw if only i could find the blu rom for a 16gb blu
Click to expand...
Click to collapse
funny thing is i did that and thats whats causing this boot loop i got into recovery after reset and still nothing
is there anything i can push using adb to solve this ?
jetboss said:
funny thing is i did that and thats whats causing this boot loop i got into recovery after reset and still nothing
is there anything i can push using adb to solve this ?
Click to expand...
Click to collapse
perhaps a stock recovery.img can help
dzamora said:
perhaps a stock recovery.img can help
Click to expand...
Click to collapse
ok well im going to try pushing the elife 7 stock recovery and see what happens
tried that all it says is installation aborted .....
You have to to try this,that is how i have unbricked mine today.
power off your phone.
prepare your gnqc so you only have to press download when needed.
power on your phone then conect fast to PC ,then press download.
If IT doesen't leț You ,pres again and just try to see If IT works in different situations.
is a long shot but this is how i unbricked mine today.
fastboot doesen't work on this device,so You can't push anithing. i don't know hou this people are doing that.
If this metod doesn't work You shold try format system and data via adb . and after that gnqc should work.
Muresan01 said:
You have to to try this,that is how i have unbricked mine today.
power off your phone.
prepare your gnqc so you only have to press download when needed.
power on your phone then conect fast to PC ,then press download.
If IT doesen't leț You ,pres again and just try to see If IT works in different situations.
is a long shot but this is how i unbricked mine today.
fastboot doesen't work on this device,so You can't push anithing. i don't know hou this people are doing that.
If this metod doesn't work You shold try format system and data via adb . and after that gnqc should work.
Click to expand...
Click to collapse
He can't use GNQC because his phone's drivers arent insatlled, gionee blocks com ports, and fastboot does work on this device, you just got to flash it, i've been using it several times
A thing to notice is when you want to acces phone storage when phone is bricked You have to poweroff your phone and keep pressing power and volume+ untill some errors start appear in windows.
then You have acces to phone memory and You can paste anithing for later flash with recovery. You must Be very carefull not to format partition when asked !!!!!!
i have bricked my gionee 32 gb several times and always been albe to restore it so,no need to panic,some method should work for You too ,just have to find the right one.
And also,my phone is a rebrand of gionee from Romania,called Allview x1 xTreme,just like life pure Xl and i haven't encountered any problem with usb drivers, just used the one gionee provided. So this mai Be the case for You, i hope i am not wrong with this one.
Com ports are only closed in android 4.4 kitkat so If he didn't update he should Be able to use gnqc.
also You must observe that phone is recognised differently by windows deppending in wich state your phone is. powered off,recovery,or on bootloop. So that's why o have said that gnqc may work but You have to find that state when he is recognised the way that gnqc wants.
Sorry for long post i Hope those observations will help you.
Sent from my E7 using Tapatalk
I finally got it to work using the phone right now to send this message
jetboss said:
I finally got it to work using the phone right now to send this message
Click to expand...
Click to collapse
Got a couple questions would appreciate if u could help.
1. How did u root the blu xl i have both the 16g and 32g
2. Did u install custom recovery in it?
3. Links to downloads plz ...
Thanks in advance
Sent from my SM-G900H using XDA Free mobile app
noblelinux said:
Got a couple questions would appreciate if u could help.
1. How did u root the blu xl i have both the 16g and 32g
2. Did u install custom recovery in it?
3. Links to downloads plz ...
Thanks in advance
Sent from my SM-G900H using XDA Free mobile app
Click to expand...
Click to collapse
I can give you some info on root and recovery, im also hoping for someone to be able to extract the 16blu life pure xl rom since the only one is for 32 gb
for root you can just use Vroot and then after installinh busybox and supersu you may erase it, for the recovery i've got the files just send me a pm and ill mail you the link
dzamora said:
I can give you some info on root and recovery, im also hoping for someone to be able to extract the 16blu life pure xl rom since the only one is for 32 gb
for root you can just use Vroot and then after installinh busybox and supersu you may erase it, for the recovery i've got the files just send me a pm and ill mail you the link
Click to expand...
Click to collapse
I sent u a pm hit me bak and ill help u with the 16gb pure xl
Sent from my SM-G900H using XDA Free mobile app
Came bak to chek if any reply i broke both my screens on the blu life pure xl 16g amd 32 gb im now on galaxy s5 but still im gonna replace the screens and use the phones for something idk most likely android dev practice
I just need info on how to extract the rom from the blu
Thanks in advanced
Sent from my SM-G900H
Where files link to download?
jetboss said:
I finally got it to work using the phone right now to send this message
Click to expand...
Click to collapse
Hi can you tell me how did your phone started back, i am also stuck on reboots , recovery is working fine , any OS/ ROM is giving me reboots all the time..please help
honestly it was a long time ago and i cannot remember what i did except it was a windows xp pc software wouldnt work on 7 and i used stock rom not the one from blu
Hi guys,
I own a Galaxy Note 4 (N910H) and have rooted it before without any problem.
Long story short I wanted to install a custom rom and on the instruction says I need to reset my device to factory before I actually install it (because mine is 4.4.4).
I successfully reset it back to factory settings, however when I tried to install the rom an error occured.
When my device restarted it goes into a boot loop.
So I go into the recovery mode and delete the caches and what not (even selecting the reset to factory setting again).
When my device restart it is stuck at the boot sreen (samsung galaxy blablabla) and it DOESNT LOOP, it just stuck there and I am unable to go into recovery mode.
I tried to reflash it using odin (i can access the downloading mode) up to no avail.
My device is detected by odin (com:x) but when I pressed start it stuck at setup connection and after a while I got the Fail message.
Now I am at a loss and have no idea what else to do. Tried kies, doesnt work either.
Kies doesnt even recognize the connection to my phone.
Any help would be appreciated.
NB: I'm a newb at this so please bear with me (and yes I kind of ****ed up)
Thanks
xverdex said:
Hi guys,
I own a Galaxy Note 4 (N910H) and have rooted it before without any problem.
Long story short I wanted to install a custom rom and on the instruction says I need to reset my device to factory before I actually install it (because mine is 4.4.4).
I successfully reset it back to factory settings, however when I tried to install the rom an error occured.
When my device restarted it goes into a boot loop.
So I go into the recovery mode and delete the caches and what not (even selecting the reset to factory setting again).
When my device restart it is stuck at the boot sreen (samsung galaxy blablabla) and it DOESNT LOOP, it just stuck there and I am unable to go into recovery mode.
I tried to reflash it using odin (i can access the downloading mode) up to no avail.
My device is detected by odin (com:x) but when I pressed start it stuck at setup connection and after a while I got the Fail message.
Now I am at a loss and have no idea what else to do. Tried kies, doesnt work either.
Kies doesnt even recognize the connection to my phone.
Any help would be appreciated.
NB: I'm a newb at this so please bear with me (and yes I kind of ****ed up)
Thanks
Click to expand...
Click to collapse
If I'm not mistaken you have Kies installed? If that is the case I would recommend you uninstall it. Then manually download the Samsung USB drivers
http://developer.samsung.com/technical-doc/view.do?v=T000000117
Reboot your PC just to be sure.
Then make sure your device isn't connected to the charger or computer and remove the battery and after 10 seconds reinsert the battery and manually boot into Download Mode (Home + Volume Down while holding the power button.)
Then connect your phone to the your PC and run Odin as Admin and try to flash the firmware.
I would also recommend that the firmware you are flashing is the correct one and is not corrupted.
You can check the firmware from Sammobile and after the download check the MD5Sum and then extract the zip file to get the firmware file.
Good luck and report back.
Sent from my trltexx using XDA Premium 4 mobile app
I had the same problem , make sure to properly install samsung drivers
if everything is still messed up , try a fresh copy of windows and install samsung drivers and the latest " Flash Tool "
i hope this fix up ur problem
Battlehero said:
Reboot your PC just to be sure.
Then make sure your device isn't connected to the charger or computer and remove the battery and after 10 seconds reinsert the battery and manually boot into Download Mode (Home + Volume Down while holding the power button.)
Then connect your phone to the your PC and run Odin as Admin and try to flash the firmware.
I would also recommend that the firmware you are flashing is the correct one and is not corrupted.
You can check the firmware from Sammobile and after the download check the MD5Sum and then extract the zip file to get the firmware file.
Good luck and report back.
Sent from my trltexx using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just to make sure, should I put the MD5 file to bootloader or AP/PDA?
Thank you for the help, I will try your solution after I get back from work
xverdex said:
Just to make sure, should I put the MD5 file to bootloader or AP/PDA?
Thank you for the help, I will try your solution after I get back from work
Click to expand...
Click to collapse
If you are using Odin version 3.09 or above it's AP, otherwise it's PDA.
Sent from my SM-N910F using XDA Premium 4 mobile app
Battlehero said:
If you are using Odin version 3.09 or above it's AP, otherwise it's PDA.
Sent from my SM-N910F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks Battlehero! now I finally get my galaxy note back to work again.
Now let's say if I want to Root my device again, is it as simple as installing CWM or TWRP and then install a custom rom?
xverdex said:
Thanks Battlehero! now I finally get my galaxy note back to work again.
Now let's say if I want to Root my device again, is it as simple as installing CWM or TWRP and then install a custom rom?
Click to expand...
Click to collapse
If you want to root your current rom then install a custom recovery (TWRP) recommended then flash SuperSU Current release: https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
You can always hit the 'Thanks Button' to show your appreciation. It's nice to see you fixed your issue.
Battlehero said:
If you want to root your current rom then install a custom recovery (TWRP) recommended then flash SuperSU Current release:
You can always hit the 'Thanks Button' to show your appreciation. It's nice to see you fixed your issue.
Click to expand...
Click to collapse
Done with the 'Thanks Button'.
Thanks for the help!
Cheers mate
Hi Everybody !
Recently my Micromax Canvas 2 A120 is troubling me a lot. The problems I am facing with my phone is :
– phone hangs while bootup
– Phone working very slow
– Programs keep crashing
– Phone not moving beyond logo when switched on
Now my phone is not moving beyond Micromax log when it is switched on.... I tried SP flash tool to get out of from this but it couldn't worked out. In instructions it is mentioned that phone debugging should be in on mode while phone is flashing... but my phone is not at all moving beyond logo when it is switched on.... How could I do then.
Your suggestions will be appreciated for bringing me out of this situation (dont suggest me to contact service center please )
Yugandhar
yugandhar5584 said:
Hi Everybody !
Recently my Micromax Canvas 2 A120 is troubling me a lot. The problems I am facing with my phone is :
– phone hangs while bootup
– Phone working very slow
– Programs keep crashing
– Phone not moving beyond logo when switched on
Now my phone is not moving beyond Micromax log when it is switched on.... I tried SP flash tool to get out of from this but it couldn't worked out. In instructions it is mentioned that phone debugging should be in on mode while phone is flashing... but my phone is not at all moving beyond logo when it is switched on.... How could I do then.
Your suggestions will be appreciated for bringing me out of this situation (dont suggest me to contact service center please )
Yugandhar
Click to expand...
Click to collapse
It doesn't matter whether the usb debugging mode on or off..
Proceed to flashing steps without any hesitation..
niyas90 said:
It doesn't matter whether the usb debugging mode on or off..
Proceed to flashing steps without any hesitation..
Click to expand...
Click to collapse
It is not working, after opening Smart Phone Flash Tool (Runtime Trace Mode)V3.1344.214 loaded scatter file and entered download button.... but at the end the progress bar is not moving further.... means its not working...
Connect the phone without battery after pressing the download button in sp flash tools
If not working install the correct mtk drivers.. Google it.
install tino driver google it . disbale antivirus . use update spft
Sent from my Rainbow using XDA Free mobile app