Hello!
When I bought my Note 3(unlocked), the firmware was Italy TIM, and I have flashed the Romania Cosmote, then Romania Unbranded.
Now I'm trying to flash back Romania Cosmote.
I just tried to upgrade my N9005's firmware from N9005XXUGNG1 (Romania Unbranded stock 4.4.2) to N9005XXUGNI4_N9005COAGNK1_N9005XXUGNI3 (Romania COSMOTE stock 4.4.2). The big problem is when flashing the xxugni4 firmware with odin 3.10, this it what happens:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNI4_N9005COAGNK1_N9005XXUGNI3_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> aboot.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> modem.bin
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> FAIL! (Ext4)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And now, Download mode says:
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT STATUS: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
KNOX KERNEL LOCK:0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S2, T2, R2, A3, P3
WRITE PROTECTION: Enable
UDC START
ODIN: Invalid ext4 image
Then I flashed back the N9005XXUGNG1 (Romania Unbranded stock 4.4.2) and all just work fine, but I want the N9005XXUGNI4_N9005COAGNK1_N9005XXUGNI3 because is newer.
My phone is unlocked.
I have tried ODIN: 3.10, 3.09, 3.07, 3.04, 1.85.
My avast is disabled
I have also tried all my USB ports.
Still have the problem...
Any solutions to do this? Thank you a lot!
catalin.gogiltan said:
...
Then I flashed back the N9005XXUGNG1 (Romania Unbranded stock 4.4.2) and all just work fine, but I want the N9005XXUGNI4_N9005COAGNK1_N9005XXUGNI3 because is newer.
My phone is unlocked.
I have tried ODIN: 3.10, 3.09, 3.07, 3.04, 1.85.
My avast is disabled
I have also tried all my USB ports.
Still have the problem...
Any solutions to do this? Thank you a lot!
Click to expand...
Click to collapse
You don't seem to have a clue what you are doing and you are very lucky that you did not f*ck things up really big time.
The problem (so far, if you insist with the clueless experiments you WILL do more damage sooner or later) is that the internal partitioning scheme is slightly different between different versions and most notably the partition used mostly for upgrades and named "hidden" is much bigger in certain models to be able to take extra bloatware from carriers. There is a recent thread somewhere in General with more info on that.
My advice - don't seek the "latest" sh*t just since it looks newer, stay with what works. Also LEARN before jumping to doing things - it is still possible (but not very simple, you really need to learn things) right now to have root with knox 0 and the benefits from that (and using it to the max) vastly outweigh the imaginary benefits of having the "latest version".
OH, and the very first thing to do once you have root - BACKUP YOUR SPECIAL EFS PARTITIONS! (at least modemst1, modemst2, fsg). Again LEARN how to do things so that you don't instead f*ck things up.
Related
Hello,
-sorry for my english I dont speak well but...
phone: I9505
I was testing cyanogemod 10.1.3 for a while but then I decided get back to stock rom, did full wipe and put this ROM I9505XXUBMF8 into Odin and start flashing but he said this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-then I couldnt go to system, recovery just to download mode so I flashed TWRP.
(I tried another stock rom, odin, PC but always same problem.)
-then i tried get back CM 10.1.3 via TWRP and it flashed and work without problem.
-then I tried flash omega rom via TWRP and it flashed without problem but booting is very slow and during the logo Samsung it takes about 10mins to boot into system and device is very hot.
-Everything about Kies and antivirus is off.
-Using just original USB cable.
-what says download mode:
ODIN MODE
PRODUCT NAME: gt-i9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: ENABLED
START [224, 1440]
SW REV, CHECK FAIL : FUSED : 2 , BINARY : 1
Any ideas how to resolve this?
Thank you
you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue
samersh72 said:
you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue
Click to expand...
Click to collapse
Thank you so much, I was looking for something all day but i didnt sure what Im really looking for
tried to flash "I9506XXUBNA2_I9506OLBBNA1_XSP.zip (singapore)" to my new galaxy s4 4g+.
i used odin 1.85 at first but it failed, so i tried again with odin 3.09 i put the tar.md5 file in "AP" but still fails at "HIDDEN".
i am now only able to view "firmware upgrade encountered an issue. please select recovery mode in Kies & try again. which does not work,
the phone will not get listed.
also on that screen is :
ODIN mode
PRODUCT NAME: GT-I9506
CURRENT BINERY: Samsung official
SYSTEM STATUS: official
KNOX LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: S1, T1, R1, A1, P0
WRITE PROTECTION: enable
UDC START.
info from odin:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506OLBBNA1_I9506XXUBMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> aboot.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
any ideas on how i can solve this?
fixed!
thanks to aresbv2000 for the solution! just install philz touch (link provided in quote).
aresbv2000 said:
flash this via odin after flashing the rom!
Click to expand...
Click to collapse
now my only issue is fixing the samsung keybord which keeps stopping every 5 seconds, manged to send the android keyboard from my old phone via wi-fi direct as a temp workaround. any clues?
update!
for complete solution click here:
http://forum.xda-developers.com/showthread.php?t=2622947
I have this problem with my Note 3. So after 2 weeks I decided to flash a new rom. I rooted my device in a weird way using CF Auto Root. After flashing that using Odin I get a PASS but the device stayed stuck on Samsung Logo. Pulled the battery then boot into Download Mode then hit Restart. Everythings fine but the device wasnt rooted so I used Kingo to finish the root. Finally rooted properly so I flashed Omega Rom V6 for the N9005 model. Everything was fine but I noticed my Android OS was draining a bit of battery life so I decided to flash a new Kernel. The kernel I used was in Omega Files Pro but it was for a different baseband. MD3 or something like that...cant remember. (I KNOW THIS MY FAULT FOR FLASHING A DIFFERENT KERNEL) So after the reboot my device was working fine. But after turning it off and on my baseband went to UNKNOWN. So I tried flashing Stock kernel but didnt help. So I flashed Omega Rom V6 again and still no luck. I then flashed Original Stock Firmware from Sammobile. Got a PASS but the device kept turning on and after about 30 secs it would turn back off and on again for another 30secs..roughly. Flashed Stock Firmware again now I get a fail.....
My warranty is voided obviously because of root.
When I turn the device on normally i get this...
ODIN MODE
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Custom
Reactivation Lock: OFF
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
Qualcomm Secureboot: ENABLE (CSB)
RP Swerv: S2, T2, R2, A2, P2
Write Protection: Enable
ODIN
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005VNZDMJ4_N9005XXUDMJ7_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> sbl1.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> aboot.mbn
<ID:0/012> rpm.mbn
<ID:0/012> tz.mbn
<ID:0/012> sdi.mbn
<ID:0/012> NON-HLOS.bin
<ID:0/012> boot.img
<ID:0/012> recovery.img
<ID:0/012> system.img.ext4
<ID:0/012> modem.bin
<ID:0/012> cache.img.ext4
<ID:0/012> hidden.img.ext4
<ID:0/012> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/012> Removed!!
PLEASE HELP ME...
PLEASE
Im from New Zealand so the file is VNZ-N9005XXUDMJ7-20131129141810
Latest version out as New Zealand hasnt received 4.4.2 KitKat update as of yet.
I have successfully used this Stock Rom a few times with no problems...
Dr_Bunny said:
I have this problem with my Note 3. So after 2 weeks I decided to flash a new rom. I rooted my device in a weird way using CF Auto Root. After flashing that using Odin I get a PASS but the device stayed stuck on Samsung Logo. Pulled the battery then boot into Download Mode then hit Restart. Everythings fine but the device wasnt rooted so I used Kingo to finish the root. Finally rooted properly so I flashed Omega Rom V6 for the N9005 model. Everything was fine but I noticed my Android OS was draining a bit of battery life so I decided to flash a new Kernel. The kernel I used was in Omega Files Pro but it was for a different baseband. MD3 or something like that...cant remember. (I KNOW THIS MY FAULT FOR FLASHING A DIFFERENT KERNEL) So after the reboot my device was working fine. But after turning it off and on my baseband went to UNKNOWN. So I tried flashing Stock kernel but didnt help. So I flashed Omega Rom V6 again and still no luck. I then flashed Original Stock Firmware from Sammobile. Got a PASS but the device kept turning on and after about 30 secs it would turn back off and on again for another 30secs..roughly. Flashed Stock Firmware again now I get a fail.....
My warranty is voided obviously because of root.
When I turn the device on normally i get this...
ODIN MODE
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Custom
Reactivation Lock: OFF
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
Qualcomm Secureboot: ENABLE (CSB)
RP Swerv: S2, T2, R2, A2, P2
Write Protection: Enable
ODIN
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMJ7_N9005VNZDMJ4_N9005XXUDMJ7_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> sbl1.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> aboot.mbn
<ID:0/012> rpm.mbn
<ID:0/012> tz.mbn
<ID:0/012> sdi.mbn
<ID:0/012> NON-HLOS.bin
<ID:0/012> boot.img
<ID:0/012> recovery.img
<ID:0/012> system.img.ext4
<ID:0/012> modem.bin
<ID:0/012> cache.img.ext4
<ID:0/012> hidden.img.ext4
<ID:0/012> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/012> Removed!!
PLEASE HELP ME...
PLEASE
Im from New Zealand so the file is VNZ-N9005XXUDMJ7-20131129141810
Latest version out as New Zealand hasnt received 4.4.2 KitKat update as of yet.
I have successfully used this Stock Rom a few times with no problems...
Click to expand...
Click to collapse
This looks like a carrier rom - "hidden" partition. Most of these seem to fail when flashing as the partition table is larger for these carrier roms... You need a pit file.
If you flashed another rom recently that wasn't carrier it may have reduced the partition table size so when you flash the carrier rom it no longer fits - this is just a theory..
Its my first post so i would like to say hello to You all.
I have bricked my phone. I cant enter recovery mode and i dont have software installed. I have honkong version 16gb sm-n9005. When im trying to flash offical rom N9005XXUGBOJ6 (polish XEO) by Odin I have error:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOJ6_N9005XEOGBOJ1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> boot.img
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> modem.bin
<ID:0/007> NON-HLOS.bin
<ID:0/007> recovery.img
<ID:0/007> rpm.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> sdi.mbn
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In my phone its writthen
ODIN MODE
PRODUCT NAME SM-N9005
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Reactivation Lock: OFF
Knox Warranty Void: 0x1 (3)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREW S2, T2, A2, A3, P3
SECURE DOWNLOAD ENABLE
UDC START
Volume Size is too big 4620288 < 4718592
ODIN : Invalid ext4 image
I have tried to find any pit file, but any pit file doesnt work. Dont know what to do next.
It would be great if you could help me.
Volume Size is too big 4620288 < 4718592
ODIN : Invalid ext4 image
AFAIK, HongKong phone can't be flashed with other region's fw due to some differences in hardware....
You must flash HK fw....
You are right, its working now. Do you know what custom rom can I install on Hong Kong version? I was trying to install Darklord note 5 port, but its bootlooping on samsung logo. So i stayed on CM 12.1.
Hi there,
a friend gave me his daughters phone for repair. I replaced the screen and the USB socket, home button pcb. Apart from that I did not touch the phone. It booted nicely and worked well. It was all stock.
A week later he came back and the phone would not boot anymore. In the upper left corner was the "secure boot" and "waranty bit set" notice. I assume that somebody else tampered with the phone and unsuccessfully tried to root it. His daugter denies.
I wanted to bring the phone bach to stock. Downloaded
Code:
G900FXXU1CRA2_G900FDBT1CRB1_G900FXXU1CQK3_HOME.tar.md5
from sammobile and flashed it to the phone.
Latest German firmeware DBT (unbranded)
Flashed it using ODIN V3.13.3
ODIN showed success.
However. The phone got stuck in Bootup on the Samsung splash screen. I left it there for more than 20 min just to make sure it realy was stuck and removed the battery.
I tried to reflash and ran into diferent errors. The latest is:
Code:
ODIN OUTPUT
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone:
ODIN MODE
PRODUCT NAME: SM-G900F
CURRENT BINARY: Samsung Official
SYSTEMSTATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (1)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Set Waranty Bit : System
SECURE CHECK FAIL : modem
Has anyone got and idea how to rescue the phone?
Kindest regards,
Gazorbeam
I've tried to flash an older firmeware version.
Code:
G900FXXS1CQD4_G900FDBT1CQA1_G900FXXU1CQA3_HOME.tar.md5
flashing with ODIN was successfull, but the phone does not boot.
RECOVERY BOOTING (blue text in upper left corner)
Hangs on splash:
Samsung Galaxy S5 / powered by andriod
Any ideas?
Regards, Gazorbeam
je lance odin apres avoir mit le firmware mais il affiche secure check fail pit
That´s what happen on my SM-G9900F a few weeks ago, what I did was using the TWRP and wipe all including the system and reinstalled again via ODIN the stock ROM.