Its my first post so i would like to say hello to You all.
I have bricked my phone. I cant enter recovery mode and i dont have software installed. I have honkong version 16gb sm-n9005. When im trying to flash offical rom N9005XXUGBOJ6 (polish XEO) by Odin I have error:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOJ6_N9005XEOGBOJ1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> boot.img
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> modem.bin
<ID:0/007> NON-HLOS.bin
<ID:0/007> recovery.img
<ID:0/007> rpm.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> sdi.mbn
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Ext4)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
In my phone its writthen
ODIN MODE
PRODUCT NAME SM-N9005
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Reactivation Lock: OFF
Knox Warranty Void: 0x1 (3)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREW S2, T2, A2, A3, P3
SECURE DOWNLOAD ENABLE
UDC START
Volume Size is too big 4620288 < 4718592
ODIN : Invalid ext4 image
I have tried to find any pit file, but any pit file doesnt work. Dont know what to do next.
It would be great if you could help me.
Volume Size is too big 4620288 < 4718592
ODIN : Invalid ext4 image
AFAIK, HongKong phone can't be flashed with other region's fw due to some differences in hardware....
You must flash HK fw....
You are right, its working now. Do you know what custom rom can I install on Hong Kong version? I was trying to install Darklord note 5 port, but its bootlooping on samsung logo. So i stayed on CM 12.1.
Related
tried to flash "I9506XXUBNA2_I9506OLBBNA1_XSP.zip (singapore)" to my new galaxy s4 4g+.
i used odin 1.85 at first but it failed, so i tried again with odin 3.09 i put the tar.md5 file in "AP" but still fails at "HIDDEN".
i am now only able to view "firmware upgrade encountered an issue. please select recovery mode in Kies & try again. which does not work,
the phone will not get listed.
also on that screen is :
ODIN mode
PRODUCT NAME: GT-I9506
CURRENT BINERY: Samsung official
SYSTEM STATUS: official
KNOX LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: S1, T1, R1, A1, P0
WRITE PROTECTION: enable
UDC START.
info from odin:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506OLBBNA1_I9506XXUBMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> aboot.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
any ideas on how i can solve this?
fixed!
thanks to aresbv2000 for the solution! just install philz touch (link provided in quote).
aresbv2000 said:
flash this via odin after flashing the rom!
Click to expand...
Click to collapse
now my only issue is fixing the samsung keybord which keeps stopping every 5 seconds, manged to send the android keyboard from my old phone via wi-fi direct as a temp workaround. any clues?
update!
for complete solution click here:
http://forum.xda-developers.com/showthread.php?t=2622947
Evening all ,
Hopefully someone here can help , Im somewhat of a newbie to this but was currently running Xnote Rom on 4.3 , I tried to upgrade to N9005XXUGNG1 following steps read on a well known website.
I received a "invalid ext4 image" error from odin and now stuck in a soft brick state where i can only access download mode. I am currently trying to get out of this back to a stock phone. I live in the UK and am on EE 4G.
Thanks in advance
UPDATE: Tried flashing N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 with the following results:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
Could you tell me which one , as the latest i can see is the GNG1 and i am not getting on well with that at present
xinfinityoO said:
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
Click to expand...
Click to collapse
Same problem..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005H3GGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just to let you whats on my download screen too :
the little android man
ODIN MODE
PRODUCT NAME - SM-N9005
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK(KK): OFF
KNOX KERNAL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2 T2 R2 A3 P1
WRITE PROTECTION: ENABLE
UDC START
ODIN : INVALID EXT4 IMAGE
Hope this helps ... And thanks for trying to help :cyclops:
Sometimes I get the android man and others I get a phone with a warning symbol and a pc saying " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
It worked , Thank you !!! :good:
Hey guys!
I'm working with the I9505 at the moment.
I flashed Omega rom (Version 40) and the Wifi stopped working..
To fix it, I went to Sammobile and just went ahead and got the Stock Australian rom (So far I've tried with the stock 4x roms and none are working, even though the phone was at 4.2.2)
The phone won't take anything from Odin.
I get a "Fail" after trying to flash things to the phone.
The messages aren't always the same, depending on what I'm flashing. The most recent from odin is as follows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505XSAEMK3_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
The phone screen itself says:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START: [224,1440]
At other times it'll read things like Fused 4, Binary 1 and stuff like that...
Please help
Just tried again with a different firmware and got the following
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNH6_I9505XSAGNH1_I9505XXUGNH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
screen says
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE: enabled
START: [224,1440]
BAR [240,1440]
Almost all Odin errors can be resolved by the following:
- Different usb port
- Different usb cable.
I9505XXUGNH6
should flash just fine.
The first one you flashed is 4.3 and you probably can't flash that anymore.
Hi!
I got it fixed (I think. Still got some testing to do) by booting the phone until it displayed something along the lines of 'Firmware update error recovery' and THAT 'version' of Odin allowed me to add the "I9505XXUGNH6_I9505XSAGNH1_I9505XXUGNH6_HOME.tar.md5" file
Not sure how that's any different from Odin but yeah, the phone boots, Wifi is on.. everything is fine. Going to try to add Root and TWRP later tonight though
Hi.
Hard bricked SM-G900F
I can boot into download mode using the de-brick image HERE
Phone shows:
reactivation lock: OFF
knox warranty void: 0x1 (4)
qualcomm secureboot: enable (CSB)
AP SWAEV: S1 T1, R1, A1, P1
SECURE DOWNLOAD: ENABLE
Using Odin3 v3.11 I flash:-
G900FXXS1CPLV_G900FOXA1CPJ6_G900FXXU1CPJ1_HOME
Flash goes through fine (see below), but after reboot nothing happens.
I cannot enter download mode without the de-brick sdcard, and recovery just sits there on the samsung booting recovery screen.
If i connect the phone to my windows pc I see "qhsusb_bulk" listed in the device manager.
Any help would be awesome.
Cheers
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
try a fresh download of the tar.md5 for your phone from sammobile.com/firmwares and flash it in Odin mode. Sounds like the bootloader is corrupt. So, once booted into the OS, youd have to manually move the bootloader from your debrick image to the internal SD with a terminal emulator
Please help my Note 3
Could not do normal boot
ODIN MODE
PRODUCT NAME: SM-N900K
Current binary: Samsung official
System status: Official
Reactivation lock: Off
Knox kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: enable (csb)
AP swrev: S2, T2, R2, A4, P2
Secure Download: Enable
UDC START
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> persist.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Post lacks information.As in what are you flashing ??
Have you tried factory reset .
JJEgan said:
Post lacks information.As in what are you flashing ??
Have you tried factory reset .
Click to expand...
Click to collapse
I'm flashing this (ALL_KTT_N900KKKU0GOC4_N900KKTT0GOC4_CL4362511_QB4250245_REV00_user_low_ship_MULTI_CERT.tar)
Cannot do factory reset because I'm just stuck at this.
I Would try and find a Korean forum for your model .
Nil information of N900K found and no firmware sorry.