Hi.
Hard bricked SM-G900F
I can boot into download mode using the de-brick image HERE
Phone shows:
reactivation lock: OFF
knox warranty void: 0x1 (4)
qualcomm secureboot: enable (CSB)
AP SWAEV: S1 T1, R1, A1, P1
SECURE DOWNLOAD: ENABLE
Using Odin3 v3.11 I flash:-
G900FXXS1CPLV_G900FOXA1CPJ6_G900FXXU1CPJ1_HOME
Flash goes through fine (see below), but after reboot nothing happens.
I cannot enter download mode without the de-brick sdcard, and recovery just sits there on the samsung booting recovery screen.
If i connect the phone to my windows pc I see "qhsusb_bulk" listed in the device manager.
Any help would be awesome.
Cheers
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
try a fresh download of the tar.md5 for your phone from sammobile.com/firmwares and flash it in Odin mode. Sounds like the bootloader is corrupt. So, once booted into the OS, youd have to manually move the bootloader from your debrick image to the internal SD with a terminal emulator
Related
tried to flash "I9506XXUBNA2_I9506OLBBNA1_XSP.zip (singapore)" to my new galaxy s4 4g+.
i used odin 1.85 at first but it failed, so i tried again with odin 3.09 i put the tar.md5 file in "AP" but still fails at "HIDDEN".
i am now only able to view "firmware upgrade encountered an issue. please select recovery mode in Kies & try again. which does not work,
the phone will not get listed.
also on that screen is :
ODIN mode
PRODUCT NAME: GT-I9506
CURRENT BINERY: Samsung official
SYSTEM STATUS: official
KNOX LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWREV: S1, T1, R1, A1, P0
WRITE PROTECTION: enable
UDC START.
info from odin:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506OLBBNA1_I9506XXUBMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> aboot.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
any ideas on how i can solve this?
fixed!
thanks to aresbv2000 for the solution! just install philz touch (link provided in quote).
aresbv2000 said:
flash this via odin after flashing the rom!
Click to expand...
Click to collapse
now my only issue is fixing the samsung keybord which keeps stopping every 5 seconds, manged to send the android keyboard from my old phone via wi-fi direct as a temp workaround. any clues?
update!
for complete solution click here:
http://forum.xda-developers.com/showthread.php?t=2622947
Evening all ,
Hopefully someone here can help , Im somewhat of a newbie to this but was currently running Xnote Rom on 4.3 , I tried to upgrade to N9005XXUGNG1 following steps read on a well known website.
I received a "invalid ext4 image" error from odin and now stuck in a soft brick state where i can only access download mode. I am currently trying to get out of this back to a stock phone. I live in the UK and am on EE 4G.
Thanks in advance
UPDATE: Tried flashing N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 with the following results:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXXDMK3_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
Could you tell me which one , as the latest i can see is the GNG1 and i am not getting on well with that at present
xinfinityoO said:
hmm..
try this..
take battery out and put it back in after 30 seconds.. then boot to download mode..
use odin to flash the latest gng1 rom..make sure to tick update bootloader in odin
Click to expand...
Click to collapse
Same problem..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005H3GGNG1_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Just to let you whats on my download screen too :
the little android man
ODIN MODE
PRODUCT NAME - SM-N9005
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK(KK): OFF
KNOX KERNAL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2 T2 R2 A3 P1
WRITE PROTECTION: ENABLE
UDC START
ODIN : INVALID EXT4 IMAGE
Hope this helps ... And thanks for trying to help :cyclops:
Sometimes I get the android man and others I get a phone with a warning symbol and a pc saying " Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
Killberty said:
take another stock ROM, you partition sizes dont seem to match to the rom u want to flash. i suggest to use the latest BTU Android 4.4.2 rom ( sammobile.com/firmware )
Click to expand...
Click to collapse
It worked , Thank you !!! :good:
Model: SM-N910W8
So my device is bricked and I can enter Download Mode, but I can't enter Recovery Mode.
When I try to flash stock ROM, it fails and says there is no PIT partition.
So I get the PIT file for my device, and I try to flash stock ROM with the PIT and ODIN gets to system write, but then proceeds to fail there.
I've tried flashing 4.4.4 and 6.0.1.
I've also tried doing NAND erase and EFS clear.
I actually have a TWRP backup on my computer, so I tried flashing TWRP recovery onto my phone, however that also fails.
I am using the original Samsung USB cable.
Please help, I can't afford to toss this phone away...
This is what I get when I try to flash stock ROM:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone I also get: ODIN : flash write failure
This is what I get when I try to flash stock ROM:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone I also get: ODIN : flash write failure
What firmware were you on when this happened?
any solutions. I'm in the the same situation
Sent from my SM-N900W8 using XDA-Developers mobile app
Have you fixed your phone yet? I am going through the exact same issue.
The Sponge said:
Model: SM-N910W8
So my device is bricked and I can enter Download Mode, but I can't enter Recovery Mode.
When I try to flash stock ROM, it fails and says there is no PIT partition.
So I get the PIT file for my device, and I try to flash stock ROM with the PIT and ODIN gets to system write, but then proceeds to fail there.
I've tried flashing 4.4.4 and 6.0.1.
I've also tried doing NAND erase and EFS clear.
I actually have a TWRP backup on my computer, so I tried flashing TWRP recovery onto my phone, however that also fails.
I am using the original Samsung USB cable.
Please help, I can't afford to toss this phone away...
Click to expand...
Click to collapse
Please help my Note 3
Could not do normal boot
ODIN MODE
PRODUCT NAME: SM-N900K
Current binary: Samsung official
System status: Official
Reactivation lock: Off
Knox kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: enable (csb)
AP swrev: S2, T2, R2, A4, P2
Secure Download: Enable
UDC START
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> persist.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Added!!
Post lacks information.As in what are you flashing ??
Have you tried factory reset .
JJEgan said:
Post lacks information.As in what are you flashing ??
Have you tried factory reset .
Click to expand...
Click to collapse
I'm flashing this (ALL_KTT_N900KKKU0GOC4_N900KKTT0GOC4_CL4362511_QB4250245_REV00_user_low_ship_MULTI_CERT.tar)
Cannot do factory reset because I'm just stuck at this.
I Would try and find a Korean forum for your model .
Nil information of N900K found and no firmware sorry.
Hi there,
a friend gave me his daughters phone for repair. I replaced the screen and the USB socket, home button pcb. Apart from that I did not touch the phone. It booted nicely and worked well. It was all stock.
A week later he came back and the phone would not boot anymore. In the upper left corner was the "secure boot" and "waranty bit set" notice. I assume that somebody else tampered with the phone and unsuccessfully tried to root it. His daugter denies.
I wanted to bring the phone bach to stock. Downloaded
Code:
G900FXXU1CRA2_G900FDBT1CRB1_G900FXXU1CQK3_HOME.tar.md5
from sammobile and flashed it to the phone.
Latest German firmeware DBT (unbranded)
Flashed it using ODIN V3.13.3
ODIN showed success.
However. The phone got stuck in Bootup on the Samsung splash screen. I left it there for more than 20 min just to make sure it realy was stuck and removed the battery.
I tried to reflash and ran into diferent errors. The latest is:
Code:
ODIN OUTPUT
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone:
ODIN MODE
PRODUCT NAME: SM-G900F
CURRENT BINARY: Samsung Official
SYSTEMSTATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (1)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Set Waranty Bit : System
SECURE CHECK FAIL : modem
Has anyone got and idea how to rescue the phone?
Kindest regards,
Gazorbeam
I've tried to flash an older firmeware version.
Code:
G900FXXS1CQD4_G900FDBT1CQA1_G900FXXU1CQA3_HOME.tar.md5
flashing with ODIN was successfull, but the phone does not boot.
RECOVERY BOOTING (blue text in upper left corner)
Hangs on splash:
Samsung Galaxy S5 / powered by andriod
Any ideas?
Regards, Gazorbeam
je lance odin apres avoir mit le firmware mais il affiche secure check fail pit
That´s what happen on my SM-G9900F a few weeks ago, what I did was using the TWRP and wipe all including the system and reinstalled again via ODIN the stock ROM.