Model: SM-N910W8
So my device is bricked and I can enter Download Mode, but I can't enter Recovery Mode.
When I try to flash stock ROM, it fails and says there is no PIT partition.
So I get the PIT file for my device, and I try to flash stock ROM with the PIT and ODIN gets to system write, but then proceeds to fail there.
I've tried flashing 4.4.4 and 6.0.1.
I've also tried doing NAND erase and EFS clear.
I actually have a TWRP backup on my computer, so I tried flashing TWRP recovery onto my phone, however that also fails.
I am using the original Samsung USB cable.
Please help, I can't afford to toss this phone away...
This is what I get when I try to flash stock ROM:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone I also get: ODIN : flash write failure
This is what I get when I try to flash stock ROM:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone I also get: ODIN : flash write failure
What firmware were you on when this happened?
any solutions. I'm in the the same situation
Sent from my SM-N900W8 using XDA-Developers mobile app
Have you fixed your phone yet? I am going through the exact same issue.
The Sponge said:
Model: SM-N910W8
So my device is bricked and I can enter Download Mode, but I can't enter Recovery Mode.
When I try to flash stock ROM, it fails and says there is no PIT partition.
So I get the PIT file for my device, and I try to flash stock ROM with the PIT and ODIN gets to system write, but then proceeds to fail there.
I've tried flashing 4.4.4 and 6.0.1.
I've also tried doing NAND erase and EFS clear.
I actually have a TWRP backup on my computer, so I tried flashing TWRP recovery onto my phone, however that also fails.
I am using the original Samsung USB cable.
Please help, I can't afford to toss this phone away...
Click to expand...
Click to collapse
Related
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNH1_N9005OLBGNH1_N9005XXUGNH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi guys my phone having some boot loop issue after a OTA update, I downloaded the latest stock rom from sammobile and tried to flash via odin but keep getting fail after the modem.bin part, did I did something wrong?
kktan said:
Hi guys my phone having some boot loop issue after a OTA update, I downloaded the latest stock rom from sammobile and tried to flash via odin but keep getting fail after the modem.bin part, did I did something wrong?
Click to expand...
Click to collapse
Guys bad news, i went to service centre and they said my phone motherboard spoilt, need to pay RM870 to change to new motherboard as my warranty just finished last week! bad luck. I declined the offer and gonna try to flash the stock firmware myself.
Currently i still able to boot into my phone, but it will keep restarting suddenly, all sorts of goodleapps not working, samsung keyboard not working or go into infinite bootloop, is this hardware issue or software related more?
When the samsung keyboard failed, i cant key in anything at all, but im able to make call but i have no contact coz cant signin to google to retrieve my contacts.
I downloaded the latest rom from sammobile and tried to use odin to flash the stock firmware but it will fail with the this error after modem.bin
QUOTE
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNH1_N9005OLBGNH1_N9005XXUGNH1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
looks like i might need to root the phone and try my luck on custom rom but i cant sign in to playstore to download certain app
any recommendation guys?
did you check the MD5 of the rom you dl???change ODIN version you use
for rooting your phone you don't need to dl files from market.. Use cf auto-root
Hey guys,
I've been having some issues with an international rom on my W8 and i decided to go back to stock with odin. As i was flashing i realized that everytime i would reboot, even after a factory reset, or data/system/cache wipe, all my file and folders were not erased. So i booted into TWRP and wiped internal SD and all the other stuff, then flashed back stock rom with odin and now i keep getting this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __Xmit Write fail
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
Basically i start flash process and about 30 seconds in i hear the phone disconnect and i get the fail. I know it's not a bad firmware download as i've lready flahsed it 5 times today, i know it's not cable, or USB port because until i wiped internal SD i did not have any issues. Now, i can still access download mode, but i cannot access recovery because it tells me "firmware upgrade encountered an issue. Please select recovery mode in kies and try again." When i connect it to kies, it simply says phone not supported and doesnt show up under emergency recovery.
Anybody know how to get me out of this mess??
weird, my note 4 cable was causing the issue. I took my old S2 cable and it worked. Thanks anyways
HI my phone was wokring perfect till i tried to dometic unlock my phone following a tutorial from here , when i when to flash the zip the odin fail now imstuck in a black screen i only can boot into download mode but cant go into my recovery , i tried diferent odin and stock tar file but odin keep failing. my phone had the 4.4.2 NG2 i tried that tar but no luck ether , in download mode i have something saying write protection enable i dont know if this is the reason i cant flash the tar. can anyone help me get my phone back to work pls .....
this is what im getting from odin
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
I'll try to help, not that good myself though. What happens when you try to go into recovery?
I'm having the same problem. Only this phone was dropped by my friend on its top left corner and hasn't booted since then.
I successfully flashed the stock NAE tar through Odin last night but it still won't boot. I also cannot boot into recovery. It simply vibrates but nothing shows up on the screen at all. I can only boot into download mode intermittently.
Can't figure out why it would flash but not boot.
Hi, so this is my first flash.. my phone came with Android 5.0.2 which is very slow compared to Kitkat, so I tried to flash a 4.4.4 rom for G901F but odin says it failed:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
So now my phone is stuck with the "Firmware Upgrade encountered an issue. Please select recovery mode in kies & try again." error. Does anyone know what does that error mean and is there anything I could do now? Is it because I tried to flash an older rom over my newer one?
Thanks!
xtexistenz said:
Hi, so this is my first flash.. my phone came with Android 5.0.2 which is very slow compared to Kitkat, so I tried to flash a 4.4.4 rom for G901F but odin says it failed:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
So now my phone is stuck with the "Firmware Upgrade encountered an issue. Please select recovery mode in kies & try again." error. Does anyone know what does that error mean and is there anything I could do now? Is it because I tried to flash an older rom over my newer one?
Thanks!
Click to expand...
Click to collapse
All good now, looks like a branded version doesn't work, so I tried a new version (Netherlands) and it worked just fine.
Ok so i was running unofficial cyanogen mod 13 alpha on my s4 9515, and after a while apps started randomly crashing and there were some other problems, so I decided to go back to stock touchwiz rom. I wiped cache and dalvik cache, put the .tar file into PDA in Odin, and Odin sad FAILED, missing pit partition, and after this I can't turn on my phone or go to recovery mode, it just says "there was a problem upgrading your firmware, connect your phone to Kies", which I also did but no luck. I can still go into download mode though...
So can anybody provide me with such .pit file? Or is there something else that I could do? Any help would be greatly appreciated
http://www.sammobile.com/forum/showthread.php?t=27308
In 99% of the cases you won't need the pit file. You just need to use a different usb port / different usb cable.
Lennyz1988 said:
In 99% of the cases you won't need the pit file. You just need to use a different usb port / different usb cable.
Click to expand...
Click to collapse
I tried that pit file already it doesn't work unfortunately. Also tried different usb ports and cables..
srdzenda said:
I tried that pit file already it doesn't work unfortunately. Also tried different usb ports and cables..
Click to expand...
Click to collapse
Can you flash a custom recovery? If so try that, perform a full wipe and flash the custom rom again.
Lennyz1988 said:
Can you flash a custom recovery? If so try that, perform a full wipe and flash the custom rom again.
Click to expand...
Click to collapse
No I can't unfortunately, also tried that already, fails in Odin like everything else...
The closest thing to success was flashing the pit file in the link that you gave me with a kitkat stock rom, it gets almost to the end and then fails
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9515XXU1AND3_I9515ITV1AND2_I9515XXU1AND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> NON-HLOS.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
srdzenda said:
No I can't unfortunately, also tried that already, fails in Odin like everything else...
The closest thing to success was flashing the pit file in the link that you gave me with a kitkat stock rom, it gets almost to the end and then fails
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9515XXU1AND3_I9515ITV1AND2_I9515XXU1AND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> NON-HLOS.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
You tried all the usb ports in your pc when flashing with .pit and this rom? The Odin log shows nothing strange so my guess would still be usb cable or usb port.