Hello,
-sorry for my english I dont speak well but...
phone: I9505
I was testing cyanogemod 10.1.3 for a while but then I decided get back to stock rom, did full wipe and put this ROM I9505XXUBMF8 into Odin and start flashing but he said this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-then I couldnt go to system, recovery just to download mode so I flashed TWRP.
(I tried another stock rom, odin, PC but always same problem.)
-then i tried get back CM 10.1.3 via TWRP and it flashed and work without problem.
-then I tried flash omega rom via TWRP and it flashed without problem but booting is very slow and during the logo Samsung it takes about 10mins to boot into system and device is very hot.
-Everything about Kies and antivirus is off.
-Using just original USB cable.
-what says download mode:
ODIN MODE
PRODUCT NAME: gt-i9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: ENABLED
START [224, 1440]
SW REV, CHECK FAIL : FUSED : 2 , BINARY : 1
Any ideas how to resolve this?
Thank you
you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue
samersh72 said:
you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue
Click to expand...
Click to collapse
Thank you so much, I was looking for something all day but i didnt sure what Im really looking for
Hi guys i bricked my galaxy note 3 - n9005 and nothing help i ve been trying flash it with odin ,in recovery mode by zip roms - by zip rooms it got stuck on samsung galaxy note 3 title and nothing happen , i want to get my phone back to the stock 4.4.2 rom pls help me nothing works in odin , i ve been trying with those pit files and nothing works :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know what firmware you had before flashing this one?
Did you try another firmware?
Also, is reactivation lock off?
Does the firmware u flash need a pit?
to be honest with you guys im quite amateur in phone things i just wanted get my phone back to stock rom , before i had this rom N9005_JACKYAWAY_NB7.1 even now when i m trying to instal this one from sd card it gets stuck on the screen " SMASUNG GALASY NOTE 3 ". i m not sure this rom requires pit file or not i have been trying flash rom without this pit file and with this pit file - effect is the same :
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
Also, is reactivation lock off?
Click to expand...
Click to collapse
what does it mean ?
odin window :
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK (KK): OFF
KNOX KERNEL LOCK: OXO
KNOX WARRANTY VOID: 0X1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTIONl: ENABLE
UDC START
jacek88zs said:
to be honest with you guys im quite amateur in phone things i just wanted get my phone back to stock rom , before i had this rom N9005_JACKYAWAY_NB7.1 even now when i m trying to instal this one from sd card it gets stuck on the screen " SMASUNG GALASY NOTE 3 ". i m not sure this rom requires pit file or not i have been trying flash rom without this pit file and with this pit file - effect is the same :
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
what does it mean ?
odin window :
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK (KK): OFF
KNOX KERNEL LOCK: OXO
KNOX WARRANTY VOID: 0X1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTIONl: ENABLE
UDC START
Click to expand...
Click to collapse
ok.
try this. Go to : http://forum.xda-developers.com/showthread.php?t=2643109
download the latest czech NC2. This one no need pit file.
Just put it under PDA/AP, no need to tick repartition. Then after your phone connected, click start.
Your reactivation lock is OFF already, so no need to worry about this.
Ok thank you, i will try do as you said mate and i will let you know about results as soon as its possible ! hopefuly it will works because i started be worried about i spent lot of money and lost the phone hehe
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
STILL same problem with this czech rom ;///
Weird. Tat error is because the partition which need pit file.
Pardon me, if u don't mind, go to that thread again and download the firmware latest which need pit, download together with the pit, and flash again with repartition being ticked.
Sent from N7105, DN3 with AGNi kernel.
When Odin throws up that error, what does the download mode say?
It always appears when the odin is trying to flash the "system"
jacek88zs said:
It always appears when the odin is trying to flash the "system"
Click to expand...
Click to collapse
I meant, what error appears on the phone screen?
jacek88zs said:
Hi guys i bricked my galaxy note 3 - n9005 and nothing help i ve been trying flash it with odin ,in recovery mode by zip roms - by zip rooms it got stuck on samsung galaxy note 3 title and nothing happen , i want to get my phone back to the stock 4.4.2 rom pls help me nothing works in odin , i ve been trying with those pit files and nothing works :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Your phone is failing on flashing the hidden partition which usually contains the CSC info etc etc
Try downloading this rom or simply to go http://forum.xda-developers.com/showthread.php?t=2643572 or http://forum.xda-developers.com/showthread.php?t=2643109
And which one should i download now and try to flash ? before i have been trying to flash czech ... but still wasgot stuck on " system "
system.img.ext
FAIL! (Ext4)
Guys which one is with pit file and which one propably should get over this bug ?
jacek88zs said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
STILL same problem with this czech rom ;///
Click to expand...
Click to collapse
Also this isnt the stock C2 Rom if you check above it Says AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid. try downloading a stock C2 rom from Sammobile or a mirror but make sure that you reset your phone through recovery once u successfly flash the rom.
i just pastet wrong text from expired window of odin sorry ,the correct was with like screen shows without this " AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5 is valid. " i ve been trying to instal this czech one
jacek88zs said:
i just pastet wrong text from expired window of odin sorry ,the correct was with like screen shows without this " AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5 is valid. " i ve been trying to instal this czech one
Click to expand...
Click to collapse
Try Odin 3.09 . Sometimes older version is the issue.
guys i have been tryin with different versions of odin ...same problem on every of them . Can someone tell me step by step what to do just apart of what to do in odin ,i know this ,which rom ,and what css files or whatever ? pls tell me in details how to do this , i propably have some korean version of phone ;/ its 16 gb note 3
jacek88zs said:
guys i have been tryin with different versions of odin ...same problem on every of them . Can someone tell me step by step what to do just apart of what to do in odin ,i know this ,which rom ,and what css files or whatever ? pls tell me in details how to do this , i propably have some korean version of phone ;/ its 16 gb note 3
Click to expand...
Click to collapse
What model does it show ??? remove the battery and look .
Sm-n9005 rf8f10pd75j
@jacek88zs : If urs is 16gb, I think u need a pit file. Urs is hongkong version I guess.
Take a look at this thread :
http://forum.xda-developers.com/showthread.php?t=2631628
Sent from N7105, DN3 with AGNi kernel.
samsung galaxy s4 i9505
here is detail of download mod
currnt binary: samsung official
system status: custom
knox kernel lock: 0x0
know warrenty void: 0x1
csb-config-lsb: 0x3
what i tru
flashing all these official rom with pass story
I9505XXUENAA, I9505XXUFNA5, I9505XXUFNB9, I9505XXUFNC9 and so on
after writing firmware doing wipe
flash with pit files tooo
flash with cutom roms
still no luck
set still in stuck with samsung
one more thing when it stuck at samsung screen have become some line like u press lcd tightly
experts tell me what i miss?
shahab uddin said:
samsung galaxy s4 i9505
here is detail of download mod
currnt binary: samsung official
system status: custom
knox kernel lock: 0x0
know warrenty void: 0x1
csb-config-lsb: 0x3
what i tru
flashing all these official rom with pass story
I9505XXUENAA, I9505XXUFNA5, I9505XXUFNB9, I9505XXUFNC9 and so on
after writing firmware doing wipe
flash with pit files tooo
flash with cutom roms
still no luck
set still in stuck with samsung
one more thing when it stuck at samsung screen have become some line like u press lcd tightly
experts tell me what i miss?
Click to expand...
Click to collapse
latest firmware succes story
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC9_I9505OXEFNC1_I9505XXUFNC9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/133> Added!!
<ID:0/133> Odin v.3 engine (ID:133)..
<ID:0/133> File analysis..
<ID:0/133> SetupConnection..
<ID:0/133> Initialzation..
<ID:0/133> Get PIT for mapping..
<ID:0/133> Firmware update start..
<ID:0/133> SingleDownload.
<ID:0/133> aboot.mbn
<ID:0/133> NAND Write Start!!
<ID:0/133> sbl1.mbn
<ID:0/133> sbl2.mbn
<ID:0/133> sbl3.mbn
<ID:0/133> rpm.mbn
<ID:0/133> tz.mbn
<ID:0/133> boot.img
<ID:0/133> recovery.img
<ID:0/133> system.img.ext4
<ID:0/133> modem.bin
<ID:0/133> NON-HLOS.bin
<ID:0/133> cache.img.ext4
<ID:0/133> hidden.img.ext4
<ID:0/133> RQT_CLOSE !!
<ID:0/133> RES OK !!
<ID:0/133> Removed!!
<ID:0/133> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
no any other solution?
Try flashing the rom for your country and phone, the latest build with odin, latest modem, try and find the right pit file and flash all with odin, then after it passes and restarts, at samsung logo, go into recovery mode( vol up, home button and power button), wipe cache, and wipe data factory reset( from recovery also). Good luck. There is no such thing as stuck i9505 there is allways a solution
Hello!
When I bought my Note 3(unlocked), the firmware was Italy TIM, and I have flashed the Romania Cosmote, then Romania Unbranded.
Now I'm trying to flash back Romania Cosmote.
I just tried to upgrade my N9005's firmware from N9005XXUGNG1 (Romania Unbranded stock 4.4.2) to N9005XXUGNI4_N9005COAGNK1_N9005XXUGNI3 (Romania COSMOTE stock 4.4.2). The big problem is when flashing the xxugni4 firmware with odin 3.10, this it what happens:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNI4_N9005COAGNK1_N9005XXUGNI3_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> aboot.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> modem.bin
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> FAIL! (Ext4)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And now, Download mode says:
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT STATUS: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
KNOX KERNEL LOCK:0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S2, T2, R2, A3, P3
WRITE PROTECTION: Enable
UDC START
ODIN: Invalid ext4 image
Then I flashed back the N9005XXUGNG1 (Romania Unbranded stock 4.4.2) and all just work fine, but I want the N9005XXUGNI4_N9005COAGNK1_N9005XXUGNI3 because is newer.
My phone is unlocked.
I have tried ODIN: 3.10, 3.09, 3.07, 3.04, 1.85.
My avast is disabled
I have also tried all my USB ports.
Still have the problem...
Any solutions to do this? Thank you a lot!
catalin.gogiltan said:
...
Then I flashed back the N9005XXUGNG1 (Romania Unbranded stock 4.4.2) and all just work fine, but I want the N9005XXUGNI4_N9005COAGNK1_N9005XXUGNI3 because is newer.
My phone is unlocked.
I have tried ODIN: 3.10, 3.09, 3.07, 3.04, 1.85.
My avast is disabled
I have also tried all my USB ports.
Still have the problem...
Any solutions to do this? Thank you a lot!
Click to expand...
Click to collapse
You don't seem to have a clue what you are doing and you are very lucky that you did not f*ck things up really big time.
The problem (so far, if you insist with the clueless experiments you WILL do more damage sooner or later) is that the internal partitioning scheme is slightly different between different versions and most notably the partition used mostly for upgrades and named "hidden" is much bigger in certain models to be able to take extra bloatware from carriers. There is a recent thread somewhere in General with more info on that.
My advice - don't seek the "latest" sh*t just since it looks newer, stay with what works. Also LEARN before jumping to doing things - it is still possible (but not very simple, you really need to learn things) right now to have root with knox 0 and the benefits from that (and using it to the max) vastly outweigh the imaginary benefits of having the "latest version".
OH, and the very first thing to do once you have root - BACKUP YOUR SPECIAL EFS PARTITIONS! (at least modemst1, modemst2, fsg). Again LEARN how to do things so that you don't instead f*ck things up.
Hi there,
a friend gave me his daughters phone for repair. I replaced the screen and the USB socket, home button pcb. Apart from that I did not touch the phone. It booted nicely and worked well. It was all stock.
A week later he came back and the phone would not boot anymore. In the upper left corner was the "secure boot" and "waranty bit set" notice. I assume that somebody else tampered with the phone and unsuccessfully tried to root it. His daugter denies.
I wanted to bring the phone bach to stock. Downloaded
Code:
G900FXXU1CRA2_G900FDBT1CRB1_G900FXXU1CQK3_HOME.tar.md5
from sammobile and flashed it to the phone.
Latest German firmeware DBT (unbranded)
Flashed it using ODIN V3.13.3
ODIN showed success.
However. The phone got stuck in Bootup on the Samsung splash screen. I left it there for more than 20 min just to make sure it realy was stuck and removed the battery.
I tried to reflash and ran into diferent errors. The latest is:
Code:
ODIN OUTPUT
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone:
ODIN MODE
PRODUCT NAME: SM-G900F
CURRENT BINARY: Samsung Official
SYSTEMSTATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X1 (1)
QUALCOM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Set Waranty Bit : System
SECURE CHECK FAIL : modem
Has anyone got and idea how to rescue the phone?
Kindest regards,
Gazorbeam
I've tried to flash an older firmeware version.
Code:
G900FXXS1CQD4_G900FDBT1CQA1_G900FXXU1CQA3_HOME.tar.md5
flashing with ODIN was successfull, but the phone does not boot.
RECOVERY BOOTING (blue text in upper left corner)
Hangs on splash:
Samsung Galaxy S5 / powered by andriod
Any ideas?
Regards, Gazorbeam
je lance odin apres avoir mit le firmware mais il affiche secure check fail pit
That´s what happen on my SM-G9900F a few weeks ago, what I did was using the TWRP and wipe all including the system and reinstalled again via ODIN the stock ROM.