[Q] How to change odin tittle?? - IDEs, Libraries, & Programming Tools

How to change odin tittle(in modle number place)?

Related

working modem for N7100 IMEI Recovery

here is the working modem for N7100 IMEI recovery..
Use Odin 1.85,
open odin add the modem file on PHONE and start...done!!!

[Q] Problems with updating bootloader / modem

edit:
I finally managed now to flash DBT NB4 with PIT..
Hello guys,
I have some problems with my N9005.
First problem:
I tried to update my bootloader, also modem witn Odin 3.09
BL: NA6
Modem: NA2
Tried to update bootloader to ND5, also tried modem to NC2. I used key combo to get into download mode.
Auto Reboot and F Reset Time ticked, nothing else. Tried one by one, first BL with BL tab, modem with CP tab
Nothing changed after reboot... still NA6 and NA2
I also used mobile odin, skips modem cuz of write protection. This also is readable in download mode.
Second problem:
After every reboot (normal, recovery, etc.) the time is reset, you have to config manually or let it grab frome time-servers.
Annoying...
Can anyone help me?
Can anyone help me?
I tried to flash N9005XXUENB7_N9005DBTENB2_N9005XXUENB1_HOME.tar.md5 with PDA tab now, with hidden.img it stopped with FAIL (size)
So I used the pit file for DBT and tried again, still FAIL! (Size)
Note 3 now starts only to download mode with firmware upgrade error warning...
edit:
I finally managed now to flash DBT NB4 with PIT..
Sometimes pit file is needed for certain firmware.
http://forum.xda-developers.com/showthread.php?t=2643109
When updating bootloader and modem, u have to shutdown phone completely before the 3 combos. And do it one by one at the correct tab.
Sent from somewhere under the sky, at the corner of this rounded earth.

Brick s4

I was trying To install twrp But Odin sayed 'no Pit partition ' And on The Phone there is The screen 'firmware upgradw encountered An issue . Please select recovery mode in kies. I tried To install Pit file with stock firmware But is The Same. (May i didnt checked debug usb)
Flash a full stock ROM in odin
No Pit partition. And when i flash rom + Pit give me The Same error

No Services, No IMEI. (G950F)

HI, NEED HELP !
My Phone doesn't see my sim card and IMEI number. *#06# not working because my phone doesn't see my sim card.
I can't flash BL via odin. Just AP, CP, CSC...
Problem is "BL" I tried AP,CP,CSC without BL its work but sim card and IMEI not working...
Odin fail :
get pit for mapping
cm.bin
FAIL...!
EDIT: Phone is bootloop, KERNEL SW check fail device 2 binary 1 error...
How can I fix this?
go to service center
( Official Firmware )

G930P sw rev check fail: [boot] fused 8 > binary 1

my g930p phone was on 6.0.1 i used combination files and flashed to factory binary now
"MODEL : SM-g930V [SS]"
PDA: FA60_G930AUCU8ARJ2
PHONE: G930AUCU8ARJ1
H/W: REV0.6
and when i try to flash to stock G930PVPU4APL6 firmware i get a "sw rev check fail: [boot] fused 8 > binary 4" can someone please help get me back to stock firmware
boglysenko said:
my g930p phone was on 6.0.1 i used combination files and flashed to factory binary now
"MODEL : SM-g930V [SS]"
PDA: FA60_G930AUCU8ARJ2
PHONE: G930AUCU8ARJ1
H/W: REV0.6
and when i try to flash to stock G930PVPU4APL6 firmware i get a "sw rev check fail: [boot] fused 8 > binary 4" can someone please help get me back to stock firmware
Click to expand...
Click to collapse
You can't flash a firmware with binary 4 if you are on binary 8. You need to install a firmware with binary 8.
I need help im stuck in the same situation Enmanuel255 could you please help us
My phone is a verizon s7
SM-G930V
PDA FA60_G930AUCU8ARJ2
PHONE G930AUCU8ARJ1
MEMORY 32GB iam able to flash using a custom binary room this file allows me to get in binary mode (COMBINATION_VZW_FA60_G930AUCU8ARJ2_VZWFAC_CL7396706_QB20148956_REV02_user_mid_noship_MULTI_CERT.tar)
but after i try to reflash to the stock firmware i get a fail message please help.
pluy said:
I need help im stuck in the same situation Enmanuel255 could you please help us
My phone is a verizon s7
SM-G930V
PDA FA60_G930AUCU8ARJ2
PHONE G930AUCU8ARJ1
MEMORY 32GB iam able to flash using a custom binary room this file allows me to get in binary mode (COMBINATION_VZW_FA60_G930AUCU8ARJ2_VZWFAC_CL7396706_QB20148956_REV02_user_mid_noship_MULTI_CERT.tar)
but after i try to reflash to the stock firmware i get a fail message please help.
Click to expand...
Click to collapse
What issue specifically?
[/COLOR]
boglysenko said:
my g930p phone was on 6.0.1 i used combination files and flashed to factory binary now
"MODEL : SM-g930V [SS]"
PDA: FA60_G930AUCU8ARJ2
PHONE: G930AUCU8ARJ1
H/W: REV0.6
and when i try to flash to stock G930PVPU4APL6 firmware i get a "sw rev check fail: [boot] fused 8 > binary 4" can someone please help get me back to stock firmware
Click to expand...
Click to collapse
If you dnt like bloatware on your phone then its good to install G930U firmware on your phone and its updated to V8 so no binary error when flashing..
https://updato.com/firmware-archive-...15FA163EE8F90B

Categories

Resources