here is the working modem for N7100 IMEI recovery..
Use Odin 1.85,
open odin add the modem file on PHONE and start...done!!!
edit:
I finally managed now to flash DBT NB4 with PIT..
Hello guys,
I have some problems with my N9005.
First problem:
I tried to update my bootloader, also modem witn Odin 3.09
BL: NA6
Modem: NA2
Tried to update bootloader to ND5, also tried modem to NC2. I used key combo to get into download mode.
Auto Reboot and F Reset Time ticked, nothing else. Tried one by one, first BL with BL tab, modem with CP tab
Nothing changed after reboot... still NA6 and NA2
I also used mobile odin, skips modem cuz of write protection. This also is readable in download mode.
Second problem:
After every reboot (normal, recovery, etc.) the time is reset, you have to config manually or let it grab frome time-servers.
Annoying...
Can anyone help me?
Can anyone help me?
I tried to flash N9005XXUENB7_N9005DBTENB2_N9005XXUENB1_HOME.tar.md5 with PDA tab now, with hidden.img it stopped with FAIL (size)
So I used the pit file for DBT and tried again, still FAIL! (Size)
Note 3 now starts only to download mode with firmware upgrade error warning...
edit:
I finally managed now to flash DBT NB4 with PIT..
Sometimes pit file is needed for certain firmware.
http://forum.xda-developers.com/showthread.php?t=2643109
When updating bootloader and modem, u have to shutdown phone completely before the 3 combos. And do it one by one at the correct tab.
Sent from somewhere under the sky, at the corner of this rounded earth.
History:
Phone need to unlock from Germany 02
Using Z3x box newest software it failed.
try flashing combination file COMBINATION_FAC_FA51_A510FXXU3API1
it failed!
Now phone is in factory binary mode.
Tried this firmware from Z3x support A510F_XXU2APC4_VFG2APC2
also failed in: sboot.bin and param.bin
Now I'm trying to download 6.01 firmware from Germany 02 I hope this time flashing with odin continues and will not stop.
Can you you give me any advise pls.
WINPINPH said:
History:
Phone need to unlock from Germany 02
Using Z3x box newest software it failed.
try flashing combination file COMBINATION_FAC_FA51_A510FXXU3API1
it failed!
Now phone is in factory binary mode.
Tried this firmware from Z3x support A510F_XXU2APC4_VFG2APC2
also failed in: sboot.bin and param.bin
Now I'm trying to download 6.01 firmware from Germany 02 I hope this time flashing with odin continues and will not stop.
Can you you give me any advise pls.
Click to expand...
Click to collapse
First one looks like Rev 3 lollipop firmware, second looks like Rev 2 lollipop firmware.
Flash MM firmware.
So, I have 2 phones - both are g900v.
one is at 4.4.2 rooted and another one is at 5, non-rooted and I can't root it, and can't downgrade as at fails at [aboot] fused 2 > Binary 1
or with some other error - basically, failing cuz odin is touching on the bootloader piece of it
So, as I understand, rooting at this point would require flashing separately AP CP CSC and Pit
1. how do I produce them?
2. which button/option in odin each file corresponds?
3. would it work better with sdk and push via cmd?
4. any way to extract these files from a stock tar file ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 ? I extracted files from it, but they don't look like AP CP CSC and Pit - at least don't start with AP CP CSC and Pit, as someone reported they should.
thanks.
When rooting my S7, it got stuck in a bootloop. When I attempted to flash back to the factory firmware, ODIN failed, and now my phone is totally bricked. I can enter download mode, but not recovery mode. When attempting to flash the latest update firmware (04/19), it continues to fail with a "SW REV CHECK FAIL: [system]Fused 3 > Binary 1" error code, which I've found is supposed to mean that I'm downgrading firmware, but it's simply not the case. I've checked my drivers, tried different versions of ODIN, etc. but nothing works.
Any ideas?
maelstromm15 said:
When rooting my S7, it got stuck in a bootloop. When I attempted to flash back to the factory firmware, ODIN failed, and now my phone is totally bricked. I can enter download mode, but not recovery mode. When attempting to flash the latest update firmware (04/19), it continues to fail with a "SW REV CHECK FAIL: [system]Fused 3 > Binary 1" error code, which I've found is supposed to mean that I'm downgrading firmware, but it's simply not the case. I've checked my drivers, tried different versions of ODIN, etc. but nothing works.
Any ideas?
Click to expand...
Click to collapse
Try a couple different firmwares, for me it hasn't always worked on my first try. You could also try the prince comsey Odin instead that may or may not help depending on which firmware you are flashing.
maelstromm15 said:
When rooting my S7, it got stuck in a bootloop. When I attempted to flash back to the factory firmware, ODIN failed, and now my phone is totally bricked. I can enter download mode, but not recovery mode. When attempting to flash the latest update firmware (04/19), it continues to fail with a "SW REV CHECK FAIL: [system]Fused 3 > Binary 1" error code, which I've found is supposed to mean that I'm downgrading firmware, but it's simply not the case. I've checked my drivers, tried different versions of ODIN, etc. but nothing works.
Any ideas?
Click to expand...
Click to collapse
Give bra1 build a try if you haven't. I upgraded too far with an AT&T firmware and had to Odin bra1 first on the U variant firmware, then could Odin bra1 V variant firmware. Here is the V variant you can try first: https://androidfilehost.com/?fid=962187416754456736
Also post your bootloader info. See if your phone still shows G930V or if it's switched to G930U variant and if it says build/baseband version post that too please. Both "too new of a bootloader" and mismatched models can be the cause of that
Edit: Here is another full version of the 4/19 firmware you mention: https://androidfilehost.com/?fid=818070582850509181
Repair Assistant will restore your phone https://www.verizonwireless.com/support/knowledge-base-80201/
DabbingDuke said:
Repair Assistant will restore your phone https://www.verizonwireless.com/support/knowledge-base-80201/
Click to expand...
Click to collapse
Sadly this can fail from even a 930U vs 930V variant difference. It's great when it works but not a great fallback if you have tried any other variant Odin/rom
djh816 said:
Give bra1 build a try if you haven't. I upgraded too far with an AT&T firmware and had to Odin bra1 first on the U variant firmware, then could Odin bra1 V variant firmware. Here is the V variant you can try first: https://androidfilehost.com/?fid=962187416754456736
Also post your bootloader info. See if your phone still shows G930V or if it's switched to G930U variant and if it says build/baseband version post that too please. Both "too new of a bootloader" and mismatched models can be the cause of that
Edit: Here is another full version of the 4/19 firmware you mention: https://androidfilehost.com/?fid=818070582850509181
Click to expand...
Click to collapse
Thanks for your help here!
I went back to BRA1 build but can't seem to change back to VZW
In download mode it says that it is a G930A
Code:
<ID:0/038> Odin engine v(ID:3.1207)..
<ID:0/038> File analysis..
<ID:0/038> skip file list for home binary
<ID:0/038> persist.img.ext4
<ID:0/038> Home Binary Download
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
I seem to remember Odin being an issue for me too at some point, do you have Odin v3.12 PrinceComsy?
I do have his Odin. For some reason it comes up a Chinese error when trying to run it. Will redownload tomorrow again.
Do you have any specific firmware that should work? Doesn't necessarily need to be VZW as I'm traveling and will use a different GSM sim.
Thanks!
turnert said:
Try a couple different firmwares, for me it hasn't always worked on my first try. You could also try the prince comsey Odin instead that may or may not help depending on which firmware you are flashing.
Click to expand...
Click to collapse
PalmCentro said:
I do have his Odin. For some reason it comes up a Chinese error when trying to run it. Will redownload tomorrow again.
Do you have any specific firmware that should work? Doesn't necessarily need to be VZW as I'm traveling and will use a different GSM sim.
Thanks!
Click to expand...
Click to collapse
I tested out one of the Oreo AT&T builds and ended up having to revert. Here was my route:
1) odin SM-G930U_1_20170516105039_fspus9jwu3_fac.zip
2) download verizon wireless software upgrade tool, restore to U variant firmware it offers (in my case BRA1)
3) odin G930VVRS4BRA1_G930VVZW4BRA1_VZW
If that doesn't work, try other full odin builds recent/old. Good luck!
Edit: I assume you know this but all USA variants with locked bootloader are the same hardware so A, U, V variants should all "work" but then its up to which version of firmware, which bootloader you currently have, which model you current have shown in bootloader. I had the best luck switching the A variant back to U, then to V. When i tried to go directly from the A firmware back to V variant directly, odin failed and Verizon's tool was useless cause it wasn't a V variant model at the time.