my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Try Adding the pit file+the stock rom in odin and flash them together, and see if that works
did you do the download mode
Power off phone
Press and hold Home + Volume down + Power on button
Press volume up to confirm and enter download mode
i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...
Kobro said:
i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...
Click to expand...
Click to collapse
Try to connect mobile using SS port. i.e. the USB port with different colour in a laptop. It is also known as US 3.0 port!
Kobro said:
my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It failed because you have not split the firmware first - Galaxy y does not support single file flashing
You need to split the firmware into pda modem and csc - You can do this by using splitfus2 link in my signature
However I have already split pretty much all available firmware which you can find on my firmware thread - http://forum.xda-developers.com/showthread.php?t=2568853
The one that you want based on what your odin log says will be
http://d-h.st/hOn
Related
Hi! I tried rooting my phone after a few reading online.
Basically the instruction is to press power,volume and main button to get to download mode, and press volume up to see the android logo.
Then open Odin, connect phone to computer via USB. Load the Root file via the PDA section. Click start.
The only options ticked are Auto Reboot, and F.Reset Time.
The instruction said click start then let the system go then the phone will restart when finished. But Odin shows it failed.
Im sure the root file downloaded is for my phone model I double checked with different sources.
What should I do? Is my phone bricked now?
I havent disconnected anything and Odin is still running. HELP!
This is what is showing in ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-h3gduosctc-smn9009.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope someone can help me ASAP I dont wanna get my phone bricked
I have a rooted SGH-i337, I used Kingo's root to root it. I recently had safestrap with a custom rom loaded but I recently deleted the rom and then uninstalled safestrap. I then tried to do a full restore using Odin...but no matter how hard I try, I can't seem to get it working.
I have tried using the MF3 files and when that didn't work, I tried using the MK2 files.
I just keep getting this.
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Removed!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And a big ol' FAIL....can someone please help me restore my phone to it's original setting?
Try reinstalling drivers, different USB ports, OEM cable, other cables, etc. There's no really telling what is causing it.
Sent from my SGH-I337 running Blackbox 3.0
DeadlySin9 said:
Try reinstalling drivers, different USB ports, OEM cable, other cables, etc. There's no really telling what is causing it.
Sent from my SGH-I337 running Blackbox 3.0
Click to expand...
Click to collapse
Is there specific instructions I should be following here?
I go into download mode by holding the down volume key and power button, then I press the up volume key when it prompts me.
A screen shows "Downloading...."
I load all the files through odin, hit start, and it should start working right there, right?
EDIT:
Reinstalled samsung drivers, I had a couple different ones installed actually for some reason...
Used a different USB port, and a different cable. Oddly enough, none of the ones on the motherboard worked and I decided to give the front ones a shot. Worked like a charm, suh-weeeet.
I have a similar problem, I'll give this a try when I get home.
Odin 3.04
mariokiller64 said:
I have a rooted SGH-i337, I used Kingo's root to root it. I recently had safestrap with a custom rom loaded but I recently deleted the rom and then uninstalled safestrap. I then tried to do a full restore using Odin...but no matter how hard I try, I can't seem to get it working.
I have tried using the MF3 files and when that didn't work, I tried using the MK2 files.
I just keep getting this.
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Removed!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And a big ol' FAIL....can someone please help me restore my phone to it's original setting?
Click to expand...
Click to collapse
used odin 3.04
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Altorn91 said:
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Click to expand...
Click to collapse
Install Kies start it and connect the phone to the pc by the stock USB cable, it should detect the phone and offer you to repair it.
Altorn91 said:
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Click to expand...
Click to collapse
Hi mate,
Easiest way out is to reflash stock rom again ( i can see your knox bit is set already) follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
There you can find PIT files for your phone , flash same type of rom you had or newer , older stock roms will fail
MAX 404 said:
Hi mate,
Easiest way out is to reflash stock rom again ( i can see your knox bit is set already) follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
There you can find PIT files for your phone , flash same type of rom you had or newer , older stock roms will fail
Click to expand...
Click to collapse
I solved using a different cable.
Altorn91 said:
I solved using a different cable.
Click to expand...
Click to collapse
Great news mate
Hi! Today I tried to flash the official LP ROM from i9506 Lolipop Official Samsung firmware 5.0.1 by mar10o, but ODIN froze, and gave the output at the end. Now my phone is hard-bricked. Battery is at 70-80%, but it won't start at all. I have no Download Mode nor Recovery. I need help, or at least guidance of what I could do next. I've searched for hours but I haven't found a viable method to reflash the phone., or at least have it do anything at all. I already know that I'm srewed, but maybe someone know how to connect to the phone somehow.
Thanks for your time!
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUDOD3_I9506NEEDOD4_I9506XXUDOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
How can it be hard bricked? As far as I can see, it didn't even flash anything.
Try booting in download mode with battery out and connected to charger.
Try booting in download mode with battery out and connected to charger and putting the battery back in.
Alexmontboik said:
Hi! Today I tried to flash the official LP ROM from i9506 Lolipop Official Samsung firmware 5.0.1 by mar10o, but ODIN froze, and gave the output at the end. Now my phone is hard-bricked. Battery is at 70-80%, but it won't start at all. I have no Download Mode nor Recovery. I need help, or at least guidance of what I could do next. I've searched for hours but I haven't found a viable method to reflash the phone., or at least have it do anything at all. I already know that I'm srewed, but maybe someone know how to connect to the phone somehow.
Thanks for your time!
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUDOD3_I9506NEEDOD4_I9506XXUDOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Hi,
Based on the ODIN log that you post, the installation interrupted because you accidentally remove your phone from your computer during initialization (if you don't do it so, might be bad USB cable). As all files are removed, you'll find yourself on a dead phone (in other words, Hard Bricked). The only way is to go to nearest Samsung Service Center, unfortunately.
Hello XDA community,
I would like to kindly ask you for your help as I'm out of ideas & desperate after evening of trying without getting to any result. Year ago, I've successfully installed custom ROM (was doing that for first (and last) time) on my S8 (SM-G950U1)... I've installed Android 9 (built PPR1.180610.011.G950U1UEU5ZSAB).
Today, I would need to get back to stock ROM (due to multiple reasons, mainly in order to be compliant with corporate policies as I'm using this device also for work purposes).
I screened in a detail way how to correctly execute that but I always failed with Odin part
What I tried
Multiple stock ROMs (G950U1UES5DSF3_G950U1OYM5DSF3_ATT, G950U1UES6DSG1_G950U1OYM6DSG1_TMB, G950U1UES6DSH1_G950U1OYM6DSH1_USC, G950U1UES6DSH1_G950U1OYM6DSH1_VZW)
Multiple USB cables
Multiple laptops
Reinstalling Samsung drivers
Multiple ODIN versions
USB debugging is on
Result is always the same .. phone is put to download mode, ODIN is launched (in admin context), phone is connected, ROM files are pushed in ODIN. Once I click Start, it runs for a few seconds and than reports this error saying
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img.lz4
<ID:0/007> Complete(Write) operation failed.
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Again I tried to google that but it seems that it might be literary anything. Does anybody have idea what other can be tested? Am I doing something wrong?
I would really appreciate any advice given to me.
Thanks!
I'm trying to do same thing but i don't find any works method, and i just wait!
visoun said:
Hello XDA community,
I would like to kindly ask you for your help as I'm out of ideas & desperate after evening of trying without getting to any result. Year ago, I've successfully installed custom ROM (was doing that for first (and last) time) on my S8 (SM-G950U1)... I've installed Android 9 (built PPR1.180610.011.G950U1UEU5ZSAB).
Today, I would need to get back to stock ROM (due to multiple reasons, mainly in order to be compliant with corporate policies as I'm using this device also for work purposes).
I screened in a detail way how to correctly execute that but I always failed with Odin part
What I tried
Multiple stock ROMs (G950U1UES5DSF3_G950U1OYM5DSF3_ATT, G950U1UES6DSG1_G950U1OYM6DSG1_TMB, G950U1UES6DSH1_G950U1OYM6DSH1_USC, G950U1UES6DSH1_G950U1OYM6DSH1_VZW)
Multiple USB cables
Multiple laptops
Reinstalling Samsung drivers
Multiple ODIN versions
USB debugging is on
Result is always the same .. phone is put to download mode, ODIN is launched (in admin context), phone is connected, ROM files are pushed in ODIN. Once I click Start, it runs for a few seconds and than reports this error saying
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img.lz4
<ID:0/007> Complete(Write) operation failed.
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Again I tried to google that but it seems that it might be literary anything. Does anybody have idea what other can be tested? Am I doing something wrong?
I would really appreciate any advice given to me.
Thanks!
Click to expand...
Click to collapse
Using wrong Odin version.
Use Odin 3.13.1 or patched version 3..13.1 or higher.
Lower versions don't support lz4 compression ratio.
spawnlives said:
Using wrong Odin version.
Use Odin 3.13.1 or patched version 3..13.1 or higher.
Lower versions don't support lz4 compression ratio.
Click to expand...
Click to collapse
Man, you made my day!!!
It started working. Thanks a lot!!
spawnlives said:
Using wrong Odin version.
Use Odin 3.13.1 or patched version 3..13.1 or higher.
Lower versions don't support lz4 compression ratio.
Click to expand...
Click to collapse
No matter what I do I cannot get Odin to move past SetupConnection. I have the drivers installed, i've restarted my computer and phone a million times, used different USB ports and cables, and every odin version from 3.12.3 to 3.13.3.
This is my log output:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5816 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I flashed the One UI beta forever ago, and want to get the actual official software on my S8 now but it is impossible to get past this step.