Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Altorn91 said:
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Click to expand...
Click to collapse
Install Kies start it and connect the phone to the pc by the stock USB cable, it should detect the phone and offer you to repair it.
Altorn91 said:
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Click to expand...
Click to collapse
Hi mate,
Easiest way out is to reflash stock rom again ( i can see your knox bit is set already) follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
There you can find PIT files for your phone , flash same type of rom you had or newer , older stock roms will fail
MAX 404 said:
Hi mate,
Easiest way out is to reflash stock rom again ( i can see your knox bit is set already) follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
There you can find PIT files for your phone , flash same type of rom you had or newer , older stock roms will fail
Click to expand...
Click to collapse
I solved using a different cable.
Altorn91 said:
I solved using a different cable.
Click to expand...
Click to collapse
Great news mate
Related
Hello,
I tried to do a CF-Auto root and as it was going through the process my phone fell and unhooked the USB cable. Now, the phone is stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Does anyone know how to get out of this screen or is my phone completely dead?
PLEASE HELP:crying:
titans20 said:
Hello,
I tried to do a CF-Auto root and as it was going through the process my phone fell and unhooked the USB cable. Now, the phone is stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Does anyone know how to get out of this screen or is my phone completely dead?
PLEASE HELP:crying:
Click to expand...
Click to collapse
Okay, so I just kept trying to get back into the download mode and it eventually worked. However, I am still stuck....Odin failed because "There is no PIT partition"....does anyone know how to fix this?
THANKS!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
titans20 said:
Okay, so I just kept trying to get back into the download mode and it eventually worked. However, I am still stuck....Odin failed because "There is no PIT partition"....does anyone know how to fix this?
THANKS!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I was able to fix the problem. If anyone gets this problem, you need to make sure you are using the stock USB cable. If you use any other brand, it will not work. Hope this helps!
im also having the same issue.
im stuck with cache.img.. anyone can help please..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> recovery.img
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img.ext4
Make sure connection on com4 when USB conn.
Sent from my SPH-L720 using xda app-developers app
adhuto said:
im also having the same issue.
im stuck with cache.img.. anyone can help please..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> recovery.img
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img.ext4
Click to expand...
Click to collapse
Check over here. Also make sure you run CF-Autoroot 'As adminstrator'. Also it doen't matter what COM port as long as it shows up.
hello guys,
I tried to install ClockWorkMod Recovery v6.0.4.4. on my GT-I9505 But during installation the following error appeared in Odin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
after that it no longer starts.
just enter in download mode and the following message appears!
firmware upgrade encountered an issue. please select recovery mode in kies and try again
How should I proceed? I think it does not protrude "write"
what has been tried!
Recovery whit kies
to install by odin stock rom (downloaded on sammobile)
to instal again ClockWorkMod Recovery
both without success
Thanks in advance!
(sorry by my google english)
- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE
the same error in odin
Joku1981 said:
- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE
Click to expand...
Click to collapse
the same error in odin,
the same happened again
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
PDA in file philz_touch_6.08.9-jfltexx.tar.md5
peuzenhu said:
the same error in odin,
the same happened again
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
PDA in file philz_touch_6.08.9-jfltexx.tar.md5
Click to expand...
Click to collapse
Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC
another PC
in the first post I was in my house.
but now I'm at work, not just another port but too as other machine.
=x
edit
I tried once more
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
something changed?
Joku1981 said:
Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC
Click to expand...
Click to collapse
I do not believe, I tried on a computer with windows XP. And surprisingly it worked!
Thanks Joku1981
Hello,
I have a GT-I9505 which was under 4.3
I did the update OTA 4.4.2 and redemarage bootloop
impossible to get to recovery I left a red message at the top: moviNAND Checksum Confirmation Fail
I try to flash via odin with the latest firmware 4.4.2 XEF and here the result:
Enter CS for MD5 ..
Check MD5 .. Do not unplug the cable ..
Please wait ..
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully ..
Leave CS ..
Added!
Odin v.3 engine (ID: 5) ..
File analysis ..
SetupConnection ..
Initialzation ..
Get PIT for mapping ..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
Do you have any ideas?
Download and unzip this file: HERE and flash it like in the pic attached (+ the stock firmware u downloaded). Reboot manually then.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
chtiti said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
Click to expand...
Click to collapse
if you use single tar file do not check re-partition option
open odin use default auto-reboot and F.reset time only
OTA update samsung missed
Hello,
same result.
Run as administrator (Right click on the icon)
Use Odin 3.07
If that doesn't work then download a 4.3 file and flash that onto the device.
OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
OTA update samsung missed
Do you think the JTAG can solve my problem?
Did you try basic stuff like:
A different usb cable
A different usb port
A different pc?
You are not running Odin on a virtual machine are you?
Did you try redownloading the firmware? Did you try other firmwares?
OTA update samsung missed
I tried everything! Nothing works!
Did you try flashing a custom recovery and then try to flash a custom rom from there?
OTA update samsung missed
re,
How do I flash a custom rom without access to recovery?
OTA update samsung missed
The S4 has gone on a JTAG date.
Told you please uncheck re-partition option...you use single file
Sent from my GT-I9500
chtiti said:
re,
How do I flash a custom rom without access to recovery?
Click to expand...
Click to collapse
Can't you reflash the recovery?
Hey Guys,
please help me, i just bricked my phone i cant boot in Rom/Recovery, only in Download Modus i can boot, but when i want to reflash a recovery (Like TWRP) it says:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM>I9505XXUHOF2_I9505OXAHOF2_DBT.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
So i downloaded an older i9505 PIT File and tried it again, but then this comes:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOF2_I9505OXAHOF2_DBT.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Samsung Galaxy S4 GT-i9505 - Android 5.01
Im using Odin v 3.09
Firmware: Germany
So i think i need a PIT File for my Version of Firmware: (Newest)I9505XXUHOF2_I9505OXAHOF2_DBT
I dont know if Im right...
Thanks for Help!
lolmann101 said:
Thanks for Help!
Click to expand...
Click to collapse
Use other USB cable or the original of Samsung.
Joku1981 said:
Use other USB cable or the original of Samsung.
Click to expand...
Click to collapse
Hello,
I tried it with the original S4 cable & with some others (HTC, NoName, etc.). It doesnt work!
lolmann101 said:
Hello,
I tried it with the original S4 cable & with some others (HTC, NoName, etc.). It doesnt work!
Click to expand...
Click to collapse
Then other USB port.
Zipped and attached PIT file for I9505XXUHOF2_I9505OXAHOF2_DBT
Downloaded directly from Samsung Kies.
Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
Go here http://galaxynote4root.com/note-4-stock-firmwares/ download the correct rom for your phone and reflash buddy. Reflash using Odin (I can provide this if its not included within the rom package)
fannyman said:
Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
Click to expand...
Click to collapse
just flash the latest rom at Sammobile via Odin and that will be fine..we have same model
luii03 said:
just flash the latest rom at Sammobile via Odin and that will be fine..we have same model
Click to expand...
Click to collapse
I tried flashing 4.4.4 but still no luck.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910KKTU1ANJ1_N910KKTC1ANJ1_N910KKTU0ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ill try to download 5.1.1 later
speedyjay said:
Go here http://galaxynote4root.com/note-4-stock-firmwares/ download the correct rom for your phone and reflash buddy. Reflash using Odin (I can provide this if its not included within the rom package)
Click to expand...
Click to collapse
I tried flashing 4.4.4 but still no luck.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910KKTU1ANJ1_N910KKTC1ANJ1_N910KKTU0ANJ1_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)