Database Users

[Q] At&t samsung galaxy s4 i337 not booting into os

Hello there! I recently had purchased a Samsung Galaxy s4. I did not really enjoy touchwiz. I really wanted Google Play Edition. Anyways, my phone is stuck in ODIN mode with a message saying "Downloading... Do not turn off target!" I know that you can enter download mode and hit cancel to boot. But, my issue is different. Listen. I got safestrap on my s4, and it worked perfectly. I backed up my phone and installed Google Play Edition on the STOCK slot. Turned out, Google Play Edition would not boot up so I went back into safestrap and added a new rom slot. Then I restored my firmware on that slot. I left the stock slot not working... Then I uninstalled safestrap at boot up, not thinking about the stock rom. THIS IS THE BIG MISTAKE. I then rebooted my phone, and I get odin with the error message. I can't get into recovery settings or safestrap of course. I am now stuck with no options on my phone. I try to go to download mode and hit cancel. This did not boot up my phone, only my Google Play Edition which was not working. Now I can't change my rom slot. All I want to do now is go back to touchwiz. I want to restore my phone, but how? I would really appreciate your help!
I was running android 4.3 jellybean on MF3 so I can't load TWRP.

AlwaysBeen said:
Hello there! I recently had purchased a Samsung Galaxy s4. I did not really enjoy touchwiz. I really wanted Google Play Edition. Anyways, my phone is stuck in ODIN mode with a message saying "Downloading... Do not turn off target!" I know that you can enter download mode and hit cancel to boot. But, my issue is different. Listen. I got safestrap on my s4, and it worked perfectly. I backed up my phone and installed Google Play Edition on the STOCK slot. Turned out, Google Play Edition would not boot up so I went back into safestrap and added a new rom slot. Then I restored my firmware on that slot. I left the stock slot not working... Then I uninstalled safestrap at boot up, not thinking about the stock rom. THIS IS THE BIG MISTAKE. I then rebooted my phone, and I get odin with the error message. I can't get into recovery settings or safestrap of course. I am now stuck with no options on my phone. I try to go to download mode and hit cancel. This did not boot up my phone, only my Google Play Edition which was not working. Now I can't change my rom slot. All I want to do now is go back to touchwiz. I want to restore my phone, but how? I would really appreciate your help!
I was running android 4.3 jellybean on MF3 so I can't load TWRP.
Click to expand...
Click to collapse
Download mf3 tar file http://forum.xda-developers.com/showthread.php?t=2504311
Run in odin, your phone should be back up and running.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
Download mf3 tar file http://forum.xda-developers.com/showthread.php?t=2504311
Run in odin, your phone should be back up and running.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know why it is failing

AlwaysBeen said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I dont know why it is failing
Click to expand...
Click to collapse
I think you've got an incomplete flash somewhere. I don't know if this will work but try the mf3 emergency files then flash the tar file again. http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[email protected] said:
I think you've got an incomplete flash somewhere. I don't know if this will work but try the mf3 emergency files then flash the tar file again. http://forum.xda-developers.com/showthread.php?t=2526964
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Which file do I exactly download from this link?

AlwaysBeen said:
Which file do I exactly download from this link?
Click to expand...
Click to collapse
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970

bobbigbuns said:
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
Click to expand...
Click to collapse
I really appreciate the registering just to help me out! Do i load the pit file with the MF3 tars? Or before?

bobbigbuns said:
You need SGS-I337_16GB.pit. Run this in Odin and it will fix your issue.
And yes I registered just to answer your question.
http://forum.xda-developers.com/showthread.php?t=2404970
Click to expand...
Click to collapse
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It failed =( What can I do? My phone is showing in red text: SECURE CHECK FAIL : PIT
MY BOOTLOADER IS LOCKED, IT SAYS MY WRITE PROTECTION IS ENABLED

AlwaysBeen said:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It failed =( What can I do? My phone is showing in red text: SECURE CHECK FAIL : PIT
MY BOOTLOADER IS LOCKED, IT SAYS MY WRITE PROTECTION IS ENABLED
Click to expand...
Click to collapse
Do you remember what bootloader you were on?
If you were on anything higher than MF3 you are wasting your time, as you cannot downgrade this far.
MK2 and up requires those specific Odin tars. Since the original post was in January I will assume you were on MK2 at that time.
See here: http://forum.xda-developers.com/showthread.php?t=2663545
Personally, I would just go with the NB1, since root is now out for us. Once you odin the NB1 file, grab the files needed to towelroot, root, install superuser.apk, install safestrap 3.72 and you will probably be back in business
Now... thus all said, I am having a nightmare myself... last night I was listening to music on my I337 NC1 stockly rooted, when all of a sudden it froze... so I pulled the battery (which was fully charged), put it back in, and now my phone won't power up.
Being the geek I am, I grabbed my original samsung udb cable and plugged it into my windows machine... lo-and-behold windows recognized it, but as a completely different device... Qualcom USB or something...
How can I get back to download mode? Or do I need a JTAG? :crying:

kevp75 said:
Do you remember what bootloader you were on?
If you were on anything higher than MF3 you are wasting your time, as you cannot downgrade this far.
MK2 and up requires those specific Odin tars. Since the original post was in January I will assume you were on MK2 at that time.
See here: http://forum.xda-developers.com/showthread.php?t=2663545
Personally, I would just go with the NB1, since root is now out for us. Once you odin the NB1 file, grab the files needed to towelroot, root, install superuser.apk, install safestrap 3.72 and you will probably be back in business
Now... thus all said, I am having a nightmare myself... last night I was listening to music on my I337 NC1 stockly rooted, when all of a sudden it froze... so I pulled the battery (which was fully charged), put it back in, and now my phone won't power up.
Being the geek I am, I grabbed my original samsung udb cable and plugged it into my windows machine... lo-and-behold windows recognized it, but as a completely different device... Qualcom USB or something...
How can I get back to download mode? Or do I need a JTAG? :crying:
Click to expand...
Click to collapse
Sorry to hear about your dilemma. I probably cant help, but why not try.
Question, what do you mean by stockly rooted NC1? Are using the NC1 stock rom but rooted, or are you using another rom? Did you root using the download method or the towel root? Just curious.
I take you have tried to get to download mode using these steps?
Power off the phone completely by removing its battery for 5 seconds.
Re-insert the battery back into its place.
Press and hold Volume Down, Home and Power buttons, all at the same time.
Release the buttons only when the ‘Warning!!’ message appears.
Next, press Volume Up button to confirm that you wish to enter Download Mode.
Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.

MatthewPresley said:
Sorry to hear about your dilemma. I probably cant help, but why not try.
Question, what do you mean by stockly rooted NC1? Are using the NC1 stock rom but rooted, or are you using another rom? Did you root using the download method or the towel root? Just curious.
I take you have tried to get to download mode using these steps?
Power off the phone completely by removing its battery for 5 seconds.
Re-insert the battery back into its place.
Press and hold Volume Down, Home and Power buttons, all at the same time.
Release the buttons only when the ‘Warning!!’ message appears.
Next, press Volume Up button to confirm that you wish to enter Download Mode.
Your device will now show a green Android with the ‘Downloading… Do not turn off target’ text listed under it.
Click to expand...
Click to collapse
yeah... tried all that.
Stock Rooted NC1 ROM
Sent from my A110 using Tapatalk

[Q] Can not update S4 I9506 with 4.3 Firmware

I am trying to flash 4.3 firmware onto my S4 using odin but get the following error, any ideas? I have the de bugger selected, all drivers installed as far as I am aware of?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506DTMBNA1_I9506XXUBML2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Thanks

Rotagirl2002 said:
I am trying to flash 4.3 firmware onto my S4 using odin but get the following error, any ideas? I have the de bugger selected, all drivers installed as far as I am aware of?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506DTMBNA1_I9506XXUBML2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Thanks
Click to expand...
Click to collapse
Try a different cables/ports

Have noticed that my phone does not connect to samung kies does even though when I plugg my phone in windows says drivers installed? If not connecting to kies could this be the issue.
Repulsa said:
Try a different cables/ports
Click to expand...
Click to collapse

Thanks, just tried using a different port and seems to be working now.
Repulsa said:
Try a different cables/ports
Click to expand...
Click to collapse

My phone resisting odin flash

my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Try Adding the pit file+the stock rom in odin and flash them together, and see if that works

did you do the download mode
Power off phone
Press and hold Home + Volume down + Power on button
Press volume up to confirm and enter download mode

i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...

Kobro said:
i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...
Click to expand...
Click to collapse
Try to connect mobile using SS port. i.e. the USB port with different colour in a laptop. It is also known as US 3.0 port!

Kobro said:
my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It failed because you have not split the firmware first - Galaxy y does not support single file flashing
You need to split the firmware into pda modem and csc - You can do this by using splitfus2 link in my signature
However I have already split pretty much all available firmware which you can find on my firmware thread - http://forum.xda-developers.com/showthread.php?t=2568853
The one that you want based on what your odin log says will be
http://d-h.st/hOn

Bricked and can't seem to fix it

So before all of this, my Sprint S4 was rooted but I don't think I installed a recovery on it as before this ****storm happened, trying to boot into a recovery didn't work, so I'm assuming I never installed one. So long story short, I was trying to install Cyanongenmod using their installer, wouldn't work after a few times and now my phone is stuck in the "firmware upgrade encountered an issue" and I can only boot into download mode, can't do anything else and I've tried using Kies recovery thing and nothing works. I've tried flashing new firmware in odin, everything I've tried always fails, gets stuck at "setup connection" a lot, tried different USB ports, cords, literally everything a few Google searches give me and I just cannot get this thing unbricked, and I'm just shocked why everything I tried to flash on it in odin just keeps failing.
I really, really need help from you guys as I need my phone for work and don't have any backup phones or anything, so I would appreciate 100% if someone can get me out this ****, thank you!

Also usually get this error in odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!

Galaxy S8 - issues with installing stock ROM

Hello XDA community,
I would like to kindly ask you for your help as I'm out of ideas & desperate after evening of trying without getting to any result. Year ago, I've successfully installed custom ROM (was doing that for first (and last) time) on my S8 (SM-G950U1)... I've installed Android 9 (built PPR1.180610.011.G950U1UEU5ZSAB).
Today, I would need to get back to stock ROM (due to multiple reasons, mainly in order to be compliant with corporate policies as I'm using this device also for work purposes).
I screened in a detail way how to correctly execute that but I always failed with Odin part
What I tried
Multiple stock ROMs (G950U1UES5DSF3_G950U1OYM5DSF3_ATT, G950U1UES6DSG1_G950U1OYM6DSG1_TMB, G950U1UES6DSH1_G950U1OYM6DSH1_USC, G950U1UES6DSH1_G950U1OYM6DSH1_VZW)
Multiple USB cables
Multiple laptops
Reinstalling Samsung drivers
Multiple ODIN versions
USB debugging is on
Result is always the same .. phone is put to download mode, ODIN is launched (in admin context), phone is connected, ROM files are pushed in ODIN. Once I click Start, it runs for a few seconds and than reports this error saying
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img.lz4
<ID:0/007> Complete(Write) operation failed.
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Again I tried to google that but it seems that it might be literary anything. Does anybody have idea what other can be tested? Am I doing something wrong?
I would really appreciate any advice given to me.
Thanks!

I'm trying to do same thing but i don't find any works method, and i just wait!

visoun said:
Hello XDA community,
I would like to kindly ask you for your help as I'm out of ideas & desperate after evening of trying without getting to any result. Year ago, I've successfully installed custom ROM (was doing that for first (and last) time) on my S8 (SM-G950U1)... I've installed Android 9 (built PPR1.180610.011.G950U1UEU5ZSAB).
Today, I would need to get back to stock ROM (due to multiple reasons, mainly in order to be compliant with corporate policies as I'm using this device also for work purposes).
I screened in a detail way how to correctly execute that but I always failed with Odin part
What I tried
Multiple stock ROMs (G950U1UES5DSF3_G950U1OYM5DSF3_ATT, G950U1UES6DSG1_G950U1OYM6DSG1_TMB, G950U1UES6DSH1_G950U1OYM6DSH1_USC, G950U1UES6DSH1_G950U1OYM6DSH1_VZW)
Multiple USB cables
Multiple laptops
Reinstalling Samsung drivers
Multiple ODIN versions
USB debugging is on
Result is always the same .. phone is put to download mode, ODIN is launched (in admin context), phone is connected, ROM files are pushed in ODIN. Once I click Start, it runs for a few seconds and than reports this error saying
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img.lz4
<ID:0/007> Complete(Write) operation failed.
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Again I tried to google that but it seems that it might be literary anything. Does anybody have idea what other can be tested? Am I doing something wrong?
I would really appreciate any advice given to me.
Thanks!
Click to expand...
Click to collapse
Using wrong Odin version.
Use Odin 3.13.1 or patched version 3..13.1 or higher.
Lower versions don't support lz4 compression ratio.

spawnlives said:
Using wrong Odin version.
Use Odin 3.13.1 or patched version 3..13.1 or higher.
Lower versions don't support lz4 compression ratio.
Click to expand...
Click to collapse
Man, you made my day!!!
It started working. Thanks a lot!!

spawnlives said:
Using wrong Odin version.
Use Odin 3.13.1 or patched version 3..13.1 or higher.
Lower versions don't support lz4 compression ratio.
Click to expand...
Click to collapse
No matter what I do I cannot get Odin to move past SetupConnection. I have the drivers installed, i've restarted my computer and phone a million times, used different USB ports and cables, and every odin version from 3.12.3 to 3.13.3.
This is my log output:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5816 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I flashed the One UI beta forever ago, and want to get the actual official software on my S8 now but it is impossible to get past this step.