I am trying to flash 4.3 firmware onto my S4 using odin but get the following error, any ideas? I have the de bugger selected, all drivers installed as far as I am aware of?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506DTMBNA1_I9506XXUBML2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Thanks
Rotagirl2002 said:
I am trying to flash 4.3 firmware onto my S4 using odin but get the following error, any ideas? I have the de bugger selected, all drivers installed as far as I am aware of?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506DTMBNA1_I9506XXUBML2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Thanks
Click to expand...
Click to collapse
Try a different cables/ports
Have noticed that my phone does not connect to samung kies does even though when I plugg my phone in windows says drivers installed? If not connecting to kies could this be the issue.
Repulsa said:
Try a different cables/ports
Click to expand...
Click to collapse
Thanks, just tried using a different port and seems to be working now.
Repulsa said:
Try a different cables/ports
Click to expand...
Click to collapse
Related
Hey guys,
I think I bricked my phone beyond repair! I attempted to use Odin to Restore my phone to MF3 stock using the tar files that were generously provided. During the Odin restore it failed, not sure what exactly happened. I have used the same files to restore the same mf3 phone on two other occasions. Now my phone won't boot to recovery or Odin mode and just says that firmware update encountered an issue. Please select recovery mode in Kies and try again. The Kies recovery never works and I am left with a phone that is a brick. Will bestbuy be able to do anything through the smart tool? Or anything I can do?
Thanks!
Sent from my iPhone using Tapatalk
You could try here...
http://forum.xda-developers.com/showthread.php?t=2360859
or pull the battery, wait a minute, and put it back and see if you can use the correct key combination to get back into download mode and try ODIN again.
Thanks for the suggestions. But nothing seems to kick it out of this Kies recovery mode. I'm sending it back to samsung. Hopefully they can repair or ship me a new device as I am still under warranty.
Sent from my iPhone using Tapatalk
dtruong23 said:
Thanks for the suggestions. But nothing seems to kick it out of this Kies recovery mode. I'm sending it back to samsung. Hopefully they can repair or ship me a new device as I am still under warranty.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Same thing happened to me.. I worked for hours and finally about gave up, but tried flashing the I337 PIT file thru Odin in the Pit option.. It said failed but I pulled the battery and rebooted into recovery then restarted.. Google for the pit file.. It's on my computer but if you can't find it I can upload it for you.. Good luck!
Btw, the screen that says "firmware has encountered an issue" should still be able to be recognized in Odin..
I had to get on my computer anyway, so here is the file I used for the PIT box in Odin 3.09.. Hope it works for you!
https://www.dropbox.com/s/fptxnxsqevjhnt9/SGS-I337_16GB.pit
im having a simular problem. I keep getting this error when i try to use odin to restore back to stock.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
iammeHD said:
im having a simular problem. I keep getting this error when i try to use odin to restore back to stock.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you do the latest update to MK2?
nerdyblonde said:
Did you do the latest update to MK2?
Click to expand...
Click to collapse
Im not sure what that is, i just wiped my phone and now im stuck at a boot loading screen and i can get recovery/download, and i was told to use odin to flash back to stock
Okay so my S4 was just fine until an update broke the wifi usage. I tried doing what I was told would probably help by trying to flash it back to how it was, but that didn't work, and I ended up with a warning message each time I power on my S4 "System Software not authorized by Samsung has been found on your phone."
It won't boot past this, and when powered off, and plugged into my computer it constantly vibrates, on and off.
I've tried flashing the Sprint Stock S4 rom, but that only leaves me with a failure message in Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope you guys can help me.
Gentooman said:
Okay so my S4 was just fine until an update broke the wifi usage. I tried doing what I was told would probably help by trying to flash it back to how it was, but that didn't work, and I ended up with a warning message each time I power on my S4 "System Software not authorized by Samsung has been found on your phone."
It won't boot past this, and when powered off, and plugged into my computer it constantly vibrates, on and off.
I've tried flashing the Sprint Stock S4 rom, but that only leaves me with a failure message in Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope you guys can help me.
Click to expand...
Click to collapse
Try KIES recovery mode
hi everybody,
i changed my cyanogenmod 11 in samy deluxe, ilost my imei so to restore iti tried to flash stockbut someting gone wrong. im now in soft brick, i tried toflash again but thats the error:
Code:
[CODE]<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
[/CODE]
i attach whats happen in my phone, i really don't what to do... pease help me....
p.s. i used odin v. 3.04 and 3.07 with the same result, mydevice is gs4 i9505
If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.
Lennyz1988 said:
If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.
Click to expand...
Click to collapse
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?
Trinity94 said:
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?
Click to expand...
Click to collapse
No.
i tried to flash autoroot and it works!!!! now i have to restore imei... if i flash stock rom imei will be restored automatically???
Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
blackyto1995 said:
Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
Click to expand...
Click to collapse
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
GDReaper said:
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
Click to expand...
Click to collapse
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
Oh, hai!
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
GearCM Recovery
Unofficial TWRP 3.0.2-1
Sent from my ASUS_Z00A using XDA Labs
Hello XDA community,
I would like to kindly ask you for your help as I'm out of ideas & desperate after evening of trying without getting to any result. Year ago, I've successfully installed custom ROM (was doing that for first (and last) time) on my S8 (SM-G950U1)... I've installed Android 9 (built PPR1.180610.011.G950U1UEU5ZSAB).
Today, I would need to get back to stock ROM (due to multiple reasons, mainly in order to be compliant with corporate policies as I'm using this device also for work purposes).
I screened in a detail way how to correctly execute that but I always failed with Odin part
What I tried
Multiple stock ROMs (G950U1UES5DSF3_G950U1OYM5DSF3_ATT, G950U1UES6DSG1_G950U1OYM6DSG1_TMB, G950U1UES6DSH1_G950U1OYM6DSH1_USC, G950U1UES6DSH1_G950U1OYM6DSH1_VZW)
Multiple USB cables
Multiple laptops
Reinstalling Samsung drivers
Multiple ODIN versions
USB debugging is on
Result is always the same .. phone is put to download mode, ODIN is launched (in admin context), phone is connected, ROM files are pushed in ODIN. Once I click Start, it runs for a few seconds and than reports this error saying
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img.lz4
<ID:0/007> Complete(Write) operation failed.
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Again I tried to google that but it seems that it might be literary anything. Does anybody have idea what other can be tested? Am I doing something wrong?
I would really appreciate any advice given to me.
Thanks!
I'm trying to do same thing but i don't find any works method, and i just wait!
visoun said:
Hello XDA community,
I would like to kindly ask you for your help as I'm out of ideas & desperate after evening of trying without getting to any result. Year ago, I've successfully installed custom ROM (was doing that for first (and last) time) on my S8 (SM-G950U1)... I've installed Android 9 (built PPR1.180610.011.G950U1UEU5ZSAB).
Today, I would need to get back to stock ROM (due to multiple reasons, mainly in order to be compliant with corporate policies as I'm using this device also for work purposes).
I screened in a detail way how to correctly execute that but I always failed with Odin part
What I tried
Multiple stock ROMs (G950U1UES5DSF3_G950U1OYM5DSF3_ATT, G950U1UES6DSG1_G950U1OYM6DSG1_TMB, G950U1UES6DSH1_G950U1OYM6DSH1_USC, G950U1UES6DSH1_G950U1OYM6DSH1_VZW)
Multiple USB cables
Multiple laptops
Reinstalling Samsung drivers
Multiple ODIN versions
USB debugging is on
Result is always the same .. phone is put to download mode, ODIN is launched (in admin context), phone is connected, ROM files are pushed in ODIN. Once I click Start, it runs for a few seconds and than reports this error saying
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img.lz4
<ID:0/007> Complete(Write) operation failed.
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Again I tried to google that but it seems that it might be literary anything. Does anybody have idea what other can be tested? Am I doing something wrong?
I would really appreciate any advice given to me.
Thanks!
Click to expand...
Click to collapse
Using wrong Odin version.
Use Odin 3.13.1 or patched version 3..13.1 or higher.
Lower versions don't support lz4 compression ratio.
spawnlives said:
Using wrong Odin version.
Use Odin 3.13.1 or patched version 3..13.1 or higher.
Lower versions don't support lz4 compression ratio.
Click to expand...
Click to collapse
Man, you made my day!!!
It started working. Thanks a lot!!
spawnlives said:
Using wrong Odin version.
Use Odin 3.13.1 or patched version 3..13.1 or higher.
Lower versions don't support lz4 compression ratio.
Click to expand...
Click to collapse
No matter what I do I cannot get Odin to move past SetupConnection. I have the drivers installed, i've restarted my computer and phone a million times, used different USB ports and cables, and every odin version from 3.12.3 to 3.13.3.
This is my log output:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5816 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
I flashed the One UI beta forever ago, and want to get the actual official software on my S8 now but it is impossible to get past this step.